| Message ID | 20241101070610.1267391-4-hongxing.zhu@nxp.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | A bunch of changes to refine i.MX PCIe driver | expand |
On Fri, Nov 01, 2024 at 03:06:03PM +0800, Richard Zhu wrote: > Since dbi2 and atu regs are added for i.MX8M PCIes. Fetch the dbi2 and > iATU base addresses from DT directly, and remove the useless codes. > It'd be useful to mention where the base addresses were extraced. Like by the DWC common driver. > Upsteam dts's have not enabled EP function. So no function broken for > old upsteam's dtb. > > Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> - Mani > --- > drivers/pci/controller/dwc/pci-imx6.c | 20 -------------------- > 1 file changed, 20 deletions(-) > > diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c > index bc8567677a67..462decd1d589 100644 > --- a/drivers/pci/controller/dwc/pci-imx6.c > +++ b/drivers/pci/controller/dwc/pci-imx6.c > @@ -1115,7 +1115,6 @@ static int imx_add_pcie_ep(struct imx_pcie *imx_pcie, > struct platform_device *pdev) > { > int ret; > - unsigned int pcie_dbi2_offset; > struct dw_pcie_ep *ep; > struct dw_pcie *pci = imx_pcie->pci; > struct dw_pcie_rp *pp = &pci->pp; > @@ -1125,25 +1124,6 @@ static int imx_add_pcie_ep(struct imx_pcie *imx_pcie, > ep = &pci->ep; > ep->ops = &pcie_ep_ops; > > - switch (imx_pcie->drvdata->variant) { > - case IMX8MQ_EP: > - case IMX8MM_EP: > - case IMX8MP_EP: > - pcie_dbi2_offset = SZ_1M; > - break; > - default: > - pcie_dbi2_offset = SZ_4K; > - break; > - } > - > - pci->dbi_base2 = pci->dbi_base + pcie_dbi2_offset; > - > - /* > - * FIXME: Ideally, dbi2 base address should come from DT. But since only IMX95 is defining > - * "dbi2" in DT, "dbi_base2" is set to NULL here for that platform alone so that the DWC > - * core code can fetch that from DT. But once all platform DTs were fixed, this and the > - * above "dbi_base2" setting should be removed. > - */ > if (device_property_match_string(dev, "reg-names", "dbi2") >= 0) > pci->dbi_base2 = NULL; > > -- > 2.37.1 >
> -----Original Message----- > From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > Sent: 2024年11月15日 14:41 > To: Hongxing Zhu <hongxing.zhu@nxp.com> > Cc: l.stach@pengutronix.de; bhelgaas@google.com; lpieralisi@kernel.org; > kw@linux.com; robh@kernel.org; krzk+dt@kernel.org; conor+dt@kernel.org; > shawnguo@kernel.org; Frank Li <frank.li@nxp.com>; > s.hauer@pengutronix.de; festevam@gmail.com; imx@lists.linux.dev; > kernel@pengutronix.de; linux-pci@vger.kernel.org; > linux-arm-kernel@lists.infradead.org; devicetree@vger.kernel.org; > linux-kernel@vger.kernel.org > Subject: Re: [PATCH v6 03/10] PCI: imx6: Fetch dbi2 and iATU base addesses > from DT > > On Fri, Nov 01, 2024 at 03:06:03PM +0800, Richard Zhu wrote: > > Since dbi2 and atu regs are added for i.MX8M PCIes. Fetch the dbi2 and > > iATU base addresses from DT directly, and remove the useless codes. > > > > It'd be useful to mention where the base addresses were extraced. Like by > the DWC common driver. You're right. How about change them to the below one? The dw_pcie_get_resources() function of DWC core codes can fetch the dbi2 and iATU base addresses from DT directly, and remove the useless codes here. > > > Upsteam dts's have not enabled EP function. So no function broken for > > old upsteam's dtb. > > > > Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> > > Reviewed-by: Manivannan Sadhasivam > <manivannan.sadhasivam@linaro.org> > > - Mani > > > --- > > drivers/pci/controller/dwc/pci-imx6.c | 20 -------------------- > > 1 file changed, 20 deletions(-) > > > > diff --git a/drivers/pci/controller/dwc/pci-imx6.c > > b/drivers/pci/controller/dwc/pci-imx6.c > > index bc8567677a67..462decd1d589 100644 > > --- a/drivers/pci/controller/dwc/pci-imx6.c > > +++ b/drivers/pci/controller/dwc/pci-imx6.c > > @@ -1115,7 +1115,6 @@ static int imx_add_pcie_ep(struct imx_pcie > *imx_pcie, > > struct platform_device *pdev) > > { > > int ret; > > - unsigned int pcie_dbi2_offset; > > struct dw_pcie_ep *ep; > > struct dw_pcie *pci = imx_pcie->pci; > > struct dw_pcie_rp *pp = &pci->pp; > > @@ -1125,25 +1124,6 @@ static int imx_add_pcie_ep(struct imx_pcie > *imx_pcie, > > ep = &pci->ep; > > ep->ops = &pcie_ep_ops; > > > > - switch (imx_pcie->drvdata->variant) { > > - case IMX8MQ_EP: > > - case IMX8MM_EP: > > - case IMX8MP_EP: > > - pcie_dbi2_offset = SZ_1M; > > - break; > > - default: > > - pcie_dbi2_offset = SZ_4K; > > - break; > > - } > > - > > - pci->dbi_base2 = pci->dbi_base + pcie_dbi2_offset; > > - > > - /* > > - * FIXME: Ideally, dbi2 base address should come from DT. But since only > IMX95 is defining > > - * "dbi2" in DT, "dbi_base2" is set to NULL here for that platform alone > so that the DWC > > - * core code can fetch that from DT. But once all platform DTs were fixed, > this and the > > - * above "dbi_base2" setting should be removed. > > - */ > > if (device_property_match_string(dev, "reg-names", "dbi2") >= 0) > > pci->dbi_base2 = NULL; The check and the NULL assignment of "pci->dbi_base2" should be removed too refer to FIXME listed above. Would updated in v7 later, Sorry about that. Best Regards Richard Zhu > > > > -- > > 2.37.1 > > > > -- > மணிவண்ணன் சதாசிவம்
On Mon, Nov 18, 2024 at 02:59:35AM +0000, Hongxing Zhu wrote: > > -----Original Message----- > > From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > > Sent: 2024年11月15日 14:41 > > To: Hongxing Zhu <hongxing.zhu@nxp.com> > > Cc: l.stach@pengutronix.de; bhelgaas@google.com; lpieralisi@kernel.org; > > kw@linux.com; robh@kernel.org; krzk+dt@kernel.org; conor+dt@kernel.org; > > shawnguo@kernel.org; Frank Li <frank.li@nxp.com>; > > s.hauer@pengutronix.de; festevam@gmail.com; imx@lists.linux.dev; > > kernel@pengutronix.de; linux-pci@vger.kernel.org; > > linux-arm-kernel@lists.infradead.org; devicetree@vger.kernel.org; > > linux-kernel@vger.kernel.org > > Subject: Re: [PATCH v6 03/10] PCI: imx6: Fetch dbi2 and iATU base addesses > > from DT > > > > On Fri, Nov 01, 2024 at 03:06:03PM +0800, Richard Zhu wrote: > > > Since dbi2 and atu regs are added for i.MX8M PCIes. Fetch the dbi2 and > > > iATU base addresses from DT directly, and remove the useless codes. > > > > > > > It'd be useful to mention where the base addresses were extraced. Like by > > the DWC common driver. > You're right. How about change them to the below one? > The dw_pcie_get_resources() function of DWC core codes can fetch the dbi2 and > iATU base addresses from DT directly, and remove the useless codes here. "Since dw_pcie_get_resources() gets the dbi2 and iATU base addresses from DT, remove the code from imx6 driver that does the same." - Mani > > > > > > Upsteam dts's have not enabled EP function. So no function broken for > > > old upsteam's dtb. > > > > > > Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> > > > > Reviewed-by: Manivannan Sadhasivam > > <manivannan.sadhasivam@linaro.org> > > > > - Mani > > > > > --- > > > drivers/pci/controller/dwc/pci-imx6.c | 20 -------------------- > > > 1 file changed, 20 deletions(-) > > > > > > diff --git a/drivers/pci/controller/dwc/pci-imx6.c > > > b/drivers/pci/controller/dwc/pci-imx6.c > > > index bc8567677a67..462decd1d589 100644 > > > --- a/drivers/pci/controller/dwc/pci-imx6.c > > > +++ b/drivers/pci/controller/dwc/pci-imx6.c > > > @@ -1115,7 +1115,6 @@ static int imx_add_pcie_ep(struct imx_pcie > > *imx_pcie, > > > struct platform_device *pdev) > > > { > > > int ret; > > > - unsigned int pcie_dbi2_offset; > > > struct dw_pcie_ep *ep; > > > struct dw_pcie *pci = imx_pcie->pci; > > > struct dw_pcie_rp *pp = &pci->pp; > > > @@ -1125,25 +1124,6 @@ static int imx_add_pcie_ep(struct imx_pcie > > *imx_pcie, > > > ep = &pci->ep; > > > ep->ops = &pcie_ep_ops; > > > > > > - switch (imx_pcie->drvdata->variant) { > > > - case IMX8MQ_EP: > > > - case IMX8MM_EP: > > > - case IMX8MP_EP: > > > - pcie_dbi2_offset = SZ_1M; > > > - break; > > > - default: > > > - pcie_dbi2_offset = SZ_4K; > > > - break; > > > - } > > > - > > > - pci->dbi_base2 = pci->dbi_base + pcie_dbi2_offset; > > > - > > > - /* > > > - * FIXME: Ideally, dbi2 base address should come from DT. But since only > > IMX95 is defining > > > - * "dbi2" in DT, "dbi_base2" is set to NULL here for that platform alone > > so that the DWC > > > - * core code can fetch that from DT. But once all platform DTs were fixed, > > this and the > > > - * above "dbi_base2" setting should be removed. > > > - */ > > > if (device_property_match_string(dev, "reg-names", "dbi2") >= 0) > > > pci->dbi_base2 = NULL; > > The check and the NULL assignment of "pci->dbi_base2" should be removed too > refer to FIXME listed above. Would updated in v7 later, Sorry about that. > > Best Regards > Richard Zhu > > > > > > -- > > > 2.37.1 > > > > > > > -- > > மணிவண்ணன் சதாசிவம்
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index bc8567677a67..462decd1d589 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -1115,7 +1115,6 @@ static int imx_add_pcie_ep(struct imx_pcie *imx_pcie, struct platform_device *pdev) { int ret; - unsigned int pcie_dbi2_offset; struct dw_pcie_ep *ep; struct dw_pcie *pci = imx_pcie->pci; struct dw_pcie_rp *pp = &pci->pp; @@ -1125,25 +1124,6 @@ static int imx_add_pcie_ep(struct imx_pcie *imx_pcie, ep = &pci->ep; ep->ops = &pcie_ep_ops; - switch (imx_pcie->drvdata->variant) { - case IMX8MQ_EP: - case IMX8MM_EP: - case IMX8MP_EP: - pcie_dbi2_offset = SZ_1M; - break; - default: - pcie_dbi2_offset = SZ_4K; - break; - } - - pci->dbi_base2 = pci->dbi_base + pcie_dbi2_offset; - - /* - * FIXME: Ideally, dbi2 base address should come from DT. But since only IMX95 is defining - * "dbi2" in DT, "dbi_base2" is set to NULL here for that platform alone so that the DWC - * core code can fetch that from DT. But once all platform DTs were fixed, this and the - * above "dbi_base2" setting should be removed. - */ if (device_property_match_string(dev, "reg-names", "dbi2") >= 0) pci->dbi_base2 = NULL;
Since dbi2 and atu regs are added for i.MX8M PCIes. Fetch the dbi2 and iATU base addresses from DT directly, and remove the useless codes. Upsteam dts's have not enabled EP function. So no function broken for old upsteam's dtb. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> --- drivers/pci/controller/dwc/pci-imx6.c | 20 -------------------- 1 file changed, 20 deletions(-)