@@ -311,24 +311,6 @@ config EDAC_CELL
Cell Broadband Engine internal memory controller
on platform without a hypervisor
-config EDAC_AMD8131
- tristate "AMD8131 HyperTransport PCI-X Tunnel"
- depends on PCI && PPC_MAPLE
- help
- Support for error detection and correction on the
- AMD8131 HyperTransport PCI-X Tunnel chip.
- Note, add more Kconfig dependency if it's adopted
- on some machine other than Maple.
-
-config EDAC_AMD8111
- tristate "AMD8111 HyperTransport I/O Hub"
- depends on PCI && PPC_MAPLE
- help
- Support for error detection and correction on the
- AMD8111 HyperTransport I/O Hub chip.
- Note, add more Kconfig dependency if it's adopted
- on some machine other than Maple.
-
config EDAC_CPC925
tristate "IBM CPC925 Memory Controller (PPC970FX)"
depends on PPC64
@@ -63,8 +63,6 @@ i10nm_edac-y := i10nm_base.o
obj-$(CONFIG_EDAC_I10NM) += i10nm_edac.o skx_edac_common.o
obj-$(CONFIG_EDAC_CELL) += cell_edac.o
-obj-$(CONFIG_EDAC_AMD8111) += amd8111_edac.o
-obj-$(CONFIG_EDAC_AMD8131) += amd8131_edac.o
obj-$(CONFIG_EDAC_HIGHBANK_MC) += highbank_mc_edac.o
obj-$(CONFIG_EDAC_HIGHBANK_L2) += highbank_l2_edac.o
deleted file mode 100644
@@ -1,596 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * amd8111_edac.c, AMD8111 Hyper Transport chip EDAC kernel module
- *
- * Copyright (c) 2008 Wind River Systems, Inc.
- *
- * Authors: Cao Qingtao <qingtao.cao@windriver.com>
- * Benjamin Walsh <benjamin.walsh@windriver.com>
- * Hu Yongqi <yongqi.hu@windriver.com>
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/edac.h>
-#include <linux/pci_ids.h>
-#include <asm/io.h>
-
-#include "edac_module.h"
-#include "amd8111_edac.h"
-
-#define AMD8111_EDAC_REVISION " Ver: 1.0.0"
-#define AMD8111_EDAC_MOD_STR "amd8111_edac"
-
-#define PCI_DEVICE_ID_AMD_8111_PCI 0x7460
-
-enum amd8111_edac_devs {
- LPC_BRIDGE = 0,
-};
-
-enum amd8111_edac_pcis {
- PCI_BRIDGE = 0,
-};
-
-/* Wrapper functions for accessing PCI configuration space */
-static int edac_pci_read_dword(struct pci_dev *dev, int reg, u32 *val32)
-{
- int ret;
-
- ret = pci_read_config_dword(dev, reg, val32);
- if (ret != 0)
- printk(KERN_ERR AMD8111_EDAC_MOD_STR
- " PCI Access Read Error at 0x%x\n", reg);
-
- return ret;
-}
-
-static void edac_pci_read_byte(struct pci_dev *dev, int reg, u8 *val8)
-{
- int ret;
-
- ret = pci_read_config_byte(dev, reg, val8);
- if (ret != 0)
- printk(KERN_ERR AMD8111_EDAC_MOD_STR
- " PCI Access Read Error at 0x%x\n", reg);
-}
-
-static void edac_pci_write_dword(struct pci_dev *dev, int reg, u32 val32)
-{
- int ret;
-
- ret = pci_write_config_dword(dev, reg, val32);
- if (ret != 0)
- printk(KERN_ERR AMD8111_EDAC_MOD_STR
- " PCI Access Write Error at 0x%x\n", reg);
-}
-
-static void edac_pci_write_byte(struct pci_dev *dev, int reg, u8 val8)
-{
- int ret;
-
- ret = pci_write_config_byte(dev, reg, val8);
- if (ret != 0)
- printk(KERN_ERR AMD8111_EDAC_MOD_STR
- " PCI Access Write Error at 0x%x\n", reg);
-}
-
-/*
- * device-specific methods for amd8111 PCI Bridge Controller
- *
- * Error Reporting and Handling for amd8111 chipset could be found
- * in its datasheet 3.1.2 section, P37
- */
-static void amd8111_pci_bridge_init(struct amd8111_pci_info *pci_info)
-{
- u32 val32;
- struct pci_dev *dev = pci_info->dev;
-
- /* First clear error detection flags on the host interface */
-
- /* Clear SSE/SMA/STA flags in the global status register*/
- edac_pci_read_dword(dev, REG_PCI_STSCMD, &val32);
- if (val32 & PCI_STSCMD_CLEAR_MASK)
- edac_pci_write_dword(dev, REG_PCI_STSCMD, val32);
-
- /* Clear CRC and Link Fail flags in HT Link Control reg */
- edac_pci_read_dword(dev, REG_HT_LINK, &val32);
- if (val32 & HT_LINK_CLEAR_MASK)
- edac_pci_write_dword(dev, REG_HT_LINK, val32);
-
- /* Second clear all fault on the secondary interface */
-
- /* Clear error flags in the memory-base limit reg. */
- edac_pci_read_dword(dev, REG_MEM_LIM, &val32);
- if (val32 & MEM_LIMIT_CLEAR_MASK)
- edac_pci_write_dword(dev, REG_MEM_LIM, val32);
-
- /* Clear Discard Timer Expired flag in Interrupt/Bridge Control reg */
- edac_pci_read_dword(dev, REG_PCI_INTBRG_CTRL, &val32);
- if (val32 & PCI_INTBRG_CTRL_CLEAR_MASK)
- edac_pci_write_dword(dev, REG_PCI_INTBRG_CTRL, val32);
-
- /* Last enable error detections */
- if (edac_op_state == EDAC_OPSTATE_POLL) {
- /* Enable System Error reporting in global status register */
- edac_pci_read_dword(dev, REG_PCI_STSCMD, &val32);
- val32 |= PCI_STSCMD_SERREN;
- edac_pci_write_dword(dev, REG_PCI_STSCMD, val32);
-
- /* Enable CRC Sync flood packets to HyperTransport Link */
- edac_pci_read_dword(dev, REG_HT_LINK, &val32);
- val32 |= HT_LINK_CRCFEN;
- edac_pci_write_dword(dev, REG_HT_LINK, val32);
-
- /* Enable SSE reporting etc in Interrupt control reg */
- edac_pci_read_dword(dev, REG_PCI_INTBRG_CTRL, &val32);
- val32 |= PCI_INTBRG_CTRL_POLL_MASK;
- edac_pci_write_dword(dev, REG_PCI_INTBRG_CTRL, val32);
- }
-}
-
-static void amd8111_pci_bridge_exit(struct amd8111_pci_info *pci_info)
-{
- u32 val32;
- struct pci_dev *dev = pci_info->dev;
-
- if (edac_op_state == EDAC_OPSTATE_POLL) {
- /* Disable System Error reporting */
- edac_pci_read_dword(dev, REG_PCI_STSCMD, &val32);
- val32 &= ~PCI_STSCMD_SERREN;
- edac_pci_write_dword(dev, REG_PCI_STSCMD, val32);
-
- /* Disable CRC flood packets */
- edac_pci_read_dword(dev, REG_HT_LINK, &val32);
- val32 &= ~HT_LINK_CRCFEN;
- edac_pci_write_dword(dev, REG_HT_LINK, val32);
-
- /* Disable DTSERREN/MARSP/SERREN in Interrupt Control reg */
- edac_pci_read_dword(dev, REG_PCI_INTBRG_CTRL, &val32);
- val32 &= ~PCI_INTBRG_CTRL_POLL_MASK;
- edac_pci_write_dword(dev, REG_PCI_INTBRG_CTRL, val32);
- }
-}
-
-static void amd8111_pci_bridge_check(struct edac_pci_ctl_info *edac_dev)
-{
- struct amd8111_pci_info *pci_info = edac_dev->pvt_info;
- struct pci_dev *dev = pci_info->dev;
- u32 val32;
-
- /* Check out PCI Bridge Status and Command Register */
- edac_pci_read_dword(dev, REG_PCI_STSCMD, &val32);
- if (val32 & PCI_STSCMD_CLEAR_MASK) {
- printk(KERN_INFO "Error(s) in PCI bridge status and command"
- "register on device %s\n", pci_info->ctl_name);
- printk(KERN_INFO "SSE: %d, RMA: %d, RTA: %d\n",
- (val32 & PCI_STSCMD_SSE) != 0,
- (val32 & PCI_STSCMD_RMA) != 0,
- (val32 & PCI_STSCMD_RTA) != 0);
-
- val32 |= PCI_STSCMD_CLEAR_MASK;
- edac_pci_write_dword(dev, REG_PCI_STSCMD, val32);
-
- edac_pci_handle_npe(edac_dev, edac_dev->ctl_name);
- }
-
- /* Check out HyperTransport Link Control Register */
- edac_pci_read_dword(dev, REG_HT_LINK, &val32);
- if (val32 & HT_LINK_LKFAIL) {
- printk(KERN_INFO "Error(s) in hypertransport link control"
- "register on device %s\n", pci_info->ctl_name);
- printk(KERN_INFO "LKFAIL: %d\n",
- (val32 & HT_LINK_LKFAIL) != 0);
-
- val32 |= HT_LINK_LKFAIL;
- edac_pci_write_dword(dev, REG_HT_LINK, val32);
-
- edac_pci_handle_npe(edac_dev, edac_dev->ctl_name);
- }
-
- /* Check out PCI Interrupt and Bridge Control Register */
- edac_pci_read_dword(dev, REG_PCI_INTBRG_CTRL, &val32);
- if (val32 & PCI_INTBRG_CTRL_DTSTAT) {
- printk(KERN_INFO "Error(s) in PCI interrupt and bridge control"
- "register on device %s\n", pci_info->ctl_name);
- printk(KERN_INFO "DTSTAT: %d\n",
- (val32 & PCI_INTBRG_CTRL_DTSTAT) != 0);
-
- val32 |= PCI_INTBRG_CTRL_DTSTAT;
- edac_pci_write_dword(dev, REG_PCI_INTBRG_CTRL, val32);
-
- edac_pci_handle_npe(edac_dev, edac_dev->ctl_name);
- }
-
- /* Check out PCI Bridge Memory Base-Limit Register */
- edac_pci_read_dword(dev, REG_MEM_LIM, &val32);
- if (val32 & MEM_LIMIT_CLEAR_MASK) {
- printk(KERN_INFO
- "Error(s) in mem limit register on %s device\n",
- pci_info->ctl_name);
- printk(KERN_INFO "DPE: %d, RSE: %d, RMA: %d\n"
- "RTA: %d, STA: %d, MDPE: %d\n",
- (val32 & MEM_LIMIT_DPE) != 0,
- (val32 & MEM_LIMIT_RSE) != 0,
- (val32 & MEM_LIMIT_RMA) != 0,
- (val32 & MEM_LIMIT_RTA) != 0,
- (val32 & MEM_LIMIT_STA) != 0,
- (val32 & MEM_LIMIT_MDPE) != 0);
-
- val32 |= MEM_LIMIT_CLEAR_MASK;
- edac_pci_write_dword(dev, REG_MEM_LIM, val32);
-
- edac_pci_handle_npe(edac_dev, edac_dev->ctl_name);
- }
-}
-
-static struct resource *legacy_io_res;
-static int at_compat_reg_broken;
-#define LEGACY_NR_PORTS 1
-
-/* device-specific methods for amd8111 LPC Bridge device */
-static void amd8111_lpc_bridge_init(struct amd8111_dev_info *dev_info)
-{
- u8 val8;
- struct pci_dev *dev = dev_info->dev;
-
- /* First clear REG_AT_COMPAT[SERR, IOCHK] if necessary */
- legacy_io_res = request_region(REG_AT_COMPAT, LEGACY_NR_PORTS,
- AMD8111_EDAC_MOD_STR);
- if (!legacy_io_res)
- printk(KERN_INFO "%s: failed to request legacy I/O region "
- "start %d, len %d\n", __func__,
- REG_AT_COMPAT, LEGACY_NR_PORTS);
- else {
- val8 = __do_inb(REG_AT_COMPAT);
- if (val8 == 0xff) { /* buggy port */
- printk(KERN_INFO "%s: port %d is buggy, not supported"
- " by hardware?\n", __func__, REG_AT_COMPAT);
- at_compat_reg_broken = 1;
- release_region(REG_AT_COMPAT, LEGACY_NR_PORTS);
- legacy_io_res = NULL;
- } else {
- u8 out8 = 0;
- if (val8 & AT_COMPAT_SERR)
- out8 = AT_COMPAT_CLRSERR;
- if (val8 & AT_COMPAT_IOCHK)
- out8 |= AT_COMPAT_CLRIOCHK;
- if (out8 > 0)
- __do_outb(out8, REG_AT_COMPAT);
- }
- }
-
- /* Second clear error flags on LPC bridge */
- edac_pci_read_byte(dev, REG_IO_CTRL_1, &val8);
- if (val8 & IO_CTRL_1_CLEAR_MASK)
- edac_pci_write_byte(dev, REG_IO_CTRL_1, val8);
-}
-
-static void amd8111_lpc_bridge_exit(struct amd8111_dev_info *dev_info)
-{
- if (legacy_io_res)
- release_region(REG_AT_COMPAT, LEGACY_NR_PORTS);
-}
-
-static void amd8111_lpc_bridge_check(struct edac_device_ctl_info *edac_dev)
-{
- struct amd8111_dev_info *dev_info = edac_dev->pvt_info;
- struct pci_dev *dev = dev_info->dev;
- u8 val8;
-
- edac_pci_read_byte(dev, REG_IO_CTRL_1, &val8);
- if (val8 & IO_CTRL_1_CLEAR_MASK) {
- printk(KERN_INFO
- "Error(s) in IO control register on %s device\n",
- dev_info->ctl_name);
- printk(KERN_INFO "LPC ERR: %d, PW2LPC: %d\n",
- (val8 & IO_CTRL_1_LPC_ERR) != 0,
- (val8 & IO_CTRL_1_PW2LPC) != 0);
-
- val8 |= IO_CTRL_1_CLEAR_MASK;
- edac_pci_write_byte(dev, REG_IO_CTRL_1, val8);
-
- edac_device_handle_ue(edac_dev, 0, 0, edac_dev->ctl_name);
- }
-
- if (at_compat_reg_broken == 0) {
- u8 out8 = 0;
- val8 = __do_inb(REG_AT_COMPAT);
- if (val8 & AT_COMPAT_SERR)
- out8 = AT_COMPAT_CLRSERR;
- if (val8 & AT_COMPAT_IOCHK)
- out8 |= AT_COMPAT_CLRIOCHK;
- if (out8 > 0) {
- __do_outb(out8, REG_AT_COMPAT);
- edac_device_handle_ue(edac_dev, 0, 0,
- edac_dev->ctl_name);
- }
- }
-}
-
-/* General devices represented by edac_device_ctl_info */
-static struct amd8111_dev_info amd8111_devices[] = {
- [LPC_BRIDGE] = {
- .err_dev = PCI_DEVICE_ID_AMD_8111_LPC,
- .ctl_name = "lpc",
- .init = amd8111_lpc_bridge_init,
- .exit = amd8111_lpc_bridge_exit,
- .check = amd8111_lpc_bridge_check,
- },
- {0},
-};
-
-/* PCI controllers represented by edac_pci_ctl_info */
-static struct amd8111_pci_info amd8111_pcis[] = {
- [PCI_BRIDGE] = {
- .err_dev = PCI_DEVICE_ID_AMD_8111_PCI,
- .ctl_name = "AMD8111_PCI_Controller",
- .init = amd8111_pci_bridge_init,
- .exit = amd8111_pci_bridge_exit,
- .check = amd8111_pci_bridge_check,
- },
- {0},
-};
-
-static int amd8111_dev_probe(struct pci_dev *dev,
- const struct pci_device_id *id)
-{
- struct amd8111_dev_info *dev_info = &amd8111_devices[id->driver_data];
- int ret = -ENODEV;
-
- dev_info->dev = pci_get_device(PCI_VENDOR_ID_AMD,
- dev_info->err_dev, NULL);
-
- if (!dev_info->dev) {
- printk(KERN_ERR "EDAC device not found:"
- "vendor %x, device %x, name %s\n",
- PCI_VENDOR_ID_AMD, dev_info->err_dev,
- dev_info->ctl_name);
- goto err;
- }
-
- if (pci_enable_device(dev_info->dev)) {
- printk(KERN_ERR "failed to enable:"
- "vendor %x, device %x, name %s\n",
- PCI_VENDOR_ID_AMD, dev_info->err_dev,
- dev_info->ctl_name);
- goto err_dev_put;
- }
-
- /*
- * we do not allocate extra private structure for
- * edac_device_ctl_info, but make use of existing
- * one instead.
- */
- dev_info->edac_idx = edac_device_alloc_index();
- dev_info->edac_dev =
- edac_device_alloc_ctl_info(0, dev_info->ctl_name, 1,
- NULL, 0, 0, dev_info->edac_idx);
- if (!dev_info->edac_dev) {
- ret = -ENOMEM;
- goto err_dev_put;
- }
-
- dev_info->edac_dev->pvt_info = dev_info;
- dev_info->edac_dev->dev = &dev_info->dev->dev;
- dev_info->edac_dev->mod_name = AMD8111_EDAC_MOD_STR;
- dev_info->edac_dev->ctl_name = dev_info->ctl_name;
- dev_info->edac_dev->dev_name = dev_name(&dev_info->dev->dev);
-
- if (edac_op_state == EDAC_OPSTATE_POLL)
- dev_info->edac_dev->edac_check = dev_info->check;
-
- if (dev_info->init)
- dev_info->init(dev_info);
-
- if (edac_device_add_device(dev_info->edac_dev) > 0) {
- printk(KERN_ERR "failed to add edac_dev for %s\n",
- dev_info->ctl_name);
- goto err_edac_free_ctl;
- }
-
- printk(KERN_INFO "added one edac_dev on AMD8111 "
- "vendor %x, device %x, name %s\n",
- PCI_VENDOR_ID_AMD, dev_info->err_dev,
- dev_info->ctl_name);
-
- return 0;
-
-err_edac_free_ctl:
- edac_device_free_ctl_info(dev_info->edac_dev);
-err_dev_put:
- pci_dev_put(dev_info->dev);
-err:
- return ret;
-}
-
-static void amd8111_dev_remove(struct pci_dev *dev)
-{
- struct amd8111_dev_info *dev_info;
-
- for (dev_info = amd8111_devices; dev_info->err_dev; dev_info++)
- if (dev_info->dev->device == dev->device)
- break;
-
- if (!dev_info->err_dev) /* should never happen */
- return;
-
- if (dev_info->edac_dev) {
- edac_device_del_device(dev_info->edac_dev->dev);
- edac_device_free_ctl_info(dev_info->edac_dev);
- }
-
- if (dev_info->exit)
- dev_info->exit(dev_info);
-
- pci_dev_put(dev_info->dev);
-}
-
-static int amd8111_pci_probe(struct pci_dev *dev,
- const struct pci_device_id *id)
-{
- struct amd8111_pci_info *pci_info = &amd8111_pcis[id->driver_data];
- int ret = -ENODEV;
-
- pci_info->dev = pci_get_device(PCI_VENDOR_ID_AMD,
- pci_info->err_dev, NULL);
-
- if (!pci_info->dev) {
- printk(KERN_ERR "EDAC device not found:"
- "vendor %x, device %x, name %s\n",
- PCI_VENDOR_ID_AMD, pci_info->err_dev,
- pci_info->ctl_name);
- goto err;
- }
-
- if (pci_enable_device(pci_info->dev)) {
- printk(KERN_ERR "failed to enable:"
- "vendor %x, device %x, name %s\n",
- PCI_VENDOR_ID_AMD, pci_info->err_dev,
- pci_info->ctl_name);
- goto err_dev_put;
- }
-
- /*
- * we do not allocate extra private structure for
- * edac_pci_ctl_info, but make use of existing
- * one instead.
- */
- pci_info->edac_idx = edac_pci_alloc_index();
- pci_info->edac_dev = edac_pci_alloc_ctl_info(0, pci_info->ctl_name);
- if (!pci_info->edac_dev) {
- ret = -ENOMEM;
- goto err_dev_put;
- }
-
- pci_info->edac_dev->pvt_info = pci_info;
- pci_info->edac_dev->dev = &pci_info->dev->dev;
- pci_info->edac_dev->mod_name = AMD8111_EDAC_MOD_STR;
- pci_info->edac_dev->ctl_name = pci_info->ctl_name;
- pci_info->edac_dev->dev_name = dev_name(&pci_info->dev->dev);
-
- if (edac_op_state == EDAC_OPSTATE_POLL)
- pci_info->edac_dev->edac_check = pci_info->check;
-
- if (pci_info->init)
- pci_info->init(pci_info);
-
- if (edac_pci_add_device(pci_info->edac_dev, pci_info->edac_idx) > 0) {
- printk(KERN_ERR "failed to add edac_pci for %s\n",
- pci_info->ctl_name);
- goto err_edac_free_ctl;
- }
-
- printk(KERN_INFO "added one edac_pci on AMD8111 "
- "vendor %x, device %x, name %s\n",
- PCI_VENDOR_ID_AMD, pci_info->err_dev,
- pci_info->ctl_name);
-
- return 0;
-
-err_edac_free_ctl:
- edac_pci_free_ctl_info(pci_info->edac_dev);
-err_dev_put:
- pci_dev_put(pci_info->dev);
-err:
- return ret;
-}
-
-static void amd8111_pci_remove(struct pci_dev *dev)
-{
- struct amd8111_pci_info *pci_info;
-
- for (pci_info = amd8111_pcis; pci_info->err_dev; pci_info++)
- if (pci_info->dev->device == dev->device)
- break;
-
- if (!pci_info->err_dev) /* should never happen */
- return;
-
- if (pci_info->edac_dev) {
- edac_pci_del_device(pci_info->edac_dev->dev);
- edac_pci_free_ctl_info(pci_info->edac_dev);
- }
-
- if (pci_info->exit)
- pci_info->exit(pci_info);
-
- pci_dev_put(pci_info->dev);
-}
-
-/* PCI Device ID talbe for general EDAC device */
-static const struct pci_device_id amd8111_edac_dev_tbl[] = {
- {
- PCI_VEND_DEV(AMD, 8111_LPC),
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .class = 0,
- .class_mask = 0,
- .driver_data = LPC_BRIDGE,
- },
- {
- 0,
- } /* table is NULL-terminated */
-};
-MODULE_DEVICE_TABLE(pci, amd8111_edac_dev_tbl);
-
-static struct pci_driver amd8111_edac_dev_driver = {
- .name = "AMD8111_EDAC_DEV",
- .probe = amd8111_dev_probe,
- .remove = amd8111_dev_remove,
- .id_table = amd8111_edac_dev_tbl,
-};
-
-/* PCI Device ID table for EDAC PCI controller */
-static const struct pci_device_id amd8111_edac_pci_tbl[] = {
- {
- PCI_VEND_DEV(AMD, 8111_PCI),
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .class = 0,
- .class_mask = 0,
- .driver_data = PCI_BRIDGE,
- },
- {
- 0,
- } /* table is NULL-terminated */
-};
-MODULE_DEVICE_TABLE(pci, amd8111_edac_pci_tbl);
-
-static struct pci_driver amd8111_edac_pci_driver = {
- .name = "AMD8111_EDAC_PCI",
- .probe = amd8111_pci_probe,
- .remove = amd8111_pci_remove,
- .id_table = amd8111_edac_pci_tbl,
-};
-
-static int __init amd8111_edac_init(void)
-{
- int val;
-
- printk(KERN_INFO "AMD8111 EDAC driver " AMD8111_EDAC_REVISION "\n");
- printk(KERN_INFO "\t(c) 2008 Wind River Systems, Inc.\n");
-
- /* Only POLL mode supported so far */
- edac_op_state = EDAC_OPSTATE_POLL;
-
- val = pci_register_driver(&amd8111_edac_dev_driver);
- val |= pci_register_driver(&amd8111_edac_pci_driver);
-
- return val;
-}
-
-static void __exit amd8111_edac_exit(void)
-{
- pci_unregister_driver(&amd8111_edac_pci_driver);
- pci_unregister_driver(&amd8111_edac_dev_driver);
-}
-
-
-module_init(amd8111_edac_init);
-module_exit(amd8111_edac_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Cao Qingtao <qingtao.cao@windriver.com>");
-MODULE_DESCRIPTION("AMD8111 HyperTransport I/O Hub EDAC kernel module");
deleted file mode 100644
@@ -1,118 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * amd8111_edac.h, EDAC defs for AMD8111 hypertransport chip
- *
- * Copyright (c) 2008 Wind River Systems, Inc.
- *
- * Authors: Cao Qingtao <qingtao.cao@windriver.com>
- * Benjamin Walsh <benjamin.walsh@windriver.com>
- * Hu Yongqi <yongqi.hu@windriver.com>
- */
-
-#ifndef _AMD8111_EDAC_H_
-#define _AMD8111_EDAC_H_
-
-/************************************************************
- * PCI Bridge Status and Command Register, DevA:0x04
- ************************************************************/
-#define REG_PCI_STSCMD 0x04
-enum pci_stscmd_bits {
- PCI_STSCMD_SSE = BIT(30),
- PCI_STSCMD_RMA = BIT(29),
- PCI_STSCMD_RTA = BIT(28),
- PCI_STSCMD_SERREN = BIT(8),
- PCI_STSCMD_CLEAR_MASK = (PCI_STSCMD_SSE |
- PCI_STSCMD_RMA |
- PCI_STSCMD_RTA)
-};
-
-/************************************************************
- * PCI Bridge Memory Base-Limit Register, DevA:0x1c
- ************************************************************/
-#define REG_MEM_LIM 0x1c
-enum mem_limit_bits {
- MEM_LIMIT_DPE = BIT(31),
- MEM_LIMIT_RSE = BIT(30),
- MEM_LIMIT_RMA = BIT(29),
- MEM_LIMIT_RTA = BIT(28),
- MEM_LIMIT_STA = BIT(27),
- MEM_LIMIT_MDPE = BIT(24),
- MEM_LIMIT_CLEAR_MASK = (MEM_LIMIT_DPE |
- MEM_LIMIT_RSE |
- MEM_LIMIT_RMA |
- MEM_LIMIT_RTA |
- MEM_LIMIT_STA |
- MEM_LIMIT_MDPE)
-};
-
-/************************************************************
- * HyperTransport Link Control Register, DevA:0xc4
- ************************************************************/
-#define REG_HT_LINK 0xc4
-enum ht_link_bits {
- HT_LINK_LKFAIL = BIT(4),
- HT_LINK_CRCFEN = BIT(1),
- HT_LINK_CLEAR_MASK = (HT_LINK_LKFAIL)
-};
-
-/************************************************************
- * PCI Bridge Interrupt and Bridge Control, DevA:0x3c
- ************************************************************/
-#define REG_PCI_INTBRG_CTRL 0x3c
-enum pci_intbrg_ctrl_bits {
- PCI_INTBRG_CTRL_DTSERREN = BIT(27),
- PCI_INTBRG_CTRL_DTSTAT = BIT(26),
- PCI_INTBRG_CTRL_MARSP = BIT(21),
- PCI_INTBRG_CTRL_SERREN = BIT(17),
- PCI_INTBRG_CTRL_PEREN = BIT(16),
- PCI_INTBRG_CTRL_CLEAR_MASK = (PCI_INTBRG_CTRL_DTSTAT),
- PCI_INTBRG_CTRL_POLL_MASK = (PCI_INTBRG_CTRL_DTSERREN |
- PCI_INTBRG_CTRL_MARSP |
- PCI_INTBRG_CTRL_SERREN)
-};
-
-/************************************************************
- * I/O Control 1 Register, DevB:0x40
- ************************************************************/
-#define REG_IO_CTRL_1 0x40
-enum io_ctrl_1_bits {
- IO_CTRL_1_NMIONERR = BIT(7),
- IO_CTRL_1_LPC_ERR = BIT(6),
- IO_CTRL_1_PW2LPC = BIT(1),
- IO_CTRL_1_CLEAR_MASK = (IO_CTRL_1_LPC_ERR | IO_CTRL_1_PW2LPC)
-};
-
-/************************************************************
- * Legacy I/O Space Registers
- ************************************************************/
-#define REG_AT_COMPAT 0x61
-enum at_compat_bits {
- AT_COMPAT_SERR = BIT(7),
- AT_COMPAT_IOCHK = BIT(6),
- AT_COMPAT_CLRIOCHK = BIT(3),
- AT_COMPAT_CLRSERR = BIT(2),
-};
-
-struct amd8111_dev_info {
- u16 err_dev; /* PCI Device ID */
- struct pci_dev *dev;
- int edac_idx; /* device index */
- char *ctl_name;
- struct edac_device_ctl_info *edac_dev;
- void (*init)(struct amd8111_dev_info *dev_info);
- void (*exit)(struct amd8111_dev_info *dev_info);
- void (*check)(struct edac_device_ctl_info *edac_dev);
-};
-
-struct amd8111_pci_info {
- u16 err_dev; /* PCI Device ID */
- struct pci_dev *dev;
- int edac_idx; /* pci index */
- const char *ctl_name;
- struct edac_pci_ctl_info *edac_dev;
- void (*init)(struct amd8111_pci_info *dev_info);
- void (*exit)(struct amd8111_pci_info *dev_info);
- void (*check)(struct edac_pci_ctl_info *edac_dev);
-};
-
-#endif /* _AMD8111_EDAC_H_ */
deleted file mode 100644
@@ -1,358 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * amd8131_edac.c, AMD8131 hypertransport chip EDAC kernel module
- *
- * Copyright (c) 2008 Wind River Systems, Inc.
- *
- * Authors: Cao Qingtao <qingtao.cao@windriver.com>
- * Benjamin Walsh <benjamin.walsh@windriver.com>
- * Hu Yongqi <yongqi.hu@windriver.com>
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/bitops.h>
-#include <linux/edac.h>
-#include <linux/pci_ids.h>
-
-#include "edac_module.h"
-#include "amd8131_edac.h"
-
-#define AMD8131_EDAC_REVISION " Ver: 1.0.0"
-#define AMD8131_EDAC_MOD_STR "amd8131_edac"
-
-/* Wrapper functions for accessing PCI configuration space */
-static void edac_pci_read_dword(struct pci_dev *dev, int reg, u32 *val32)
-{
- int ret;
-
- ret = pci_read_config_dword(dev, reg, val32);
- if (ret != 0)
- printk(KERN_ERR AMD8131_EDAC_MOD_STR
- " PCI Access Read Error at 0x%x\n", reg);
-}
-
-static void edac_pci_write_dword(struct pci_dev *dev, int reg, u32 val32)
-{
- int ret;
-
- ret = pci_write_config_dword(dev, reg, val32);
- if (ret != 0)
- printk(KERN_ERR AMD8131_EDAC_MOD_STR
- " PCI Access Write Error at 0x%x\n", reg);
-}
-
-/* Support up to two AMD8131 chipsets on a platform */
-static struct amd8131_dev_info amd8131_devices[] = {
- {
- .inst = NORTH_A,
- .devfn = DEVFN_PCIX_BRIDGE_NORTH_A,
- .ctl_name = "AMD8131_PCIX_NORTH_A",
- },
- {
- .inst = NORTH_B,
- .devfn = DEVFN_PCIX_BRIDGE_NORTH_B,
- .ctl_name = "AMD8131_PCIX_NORTH_B",
- },
- {
- .inst = SOUTH_A,
- .devfn = DEVFN_PCIX_BRIDGE_SOUTH_A,
- .ctl_name = "AMD8131_PCIX_SOUTH_A",
- },
- {
- .inst = SOUTH_B,
- .devfn = DEVFN_PCIX_BRIDGE_SOUTH_B,
- .ctl_name = "AMD8131_PCIX_SOUTH_B",
- },
- {.inst = NO_BRIDGE,},
-};
-
-static void amd8131_pcix_init(struct amd8131_dev_info *dev_info)
-{
- u32 val32;
- struct pci_dev *dev = dev_info->dev;
-
- /* First clear error detection flags */
- edac_pci_read_dword(dev, REG_MEM_LIM, &val32);
- if (val32 & MEM_LIMIT_MASK)
- edac_pci_write_dword(dev, REG_MEM_LIM, val32);
-
- /* Clear Discard Timer Timedout flag */
- edac_pci_read_dword(dev, REG_INT_CTLR, &val32);
- if (val32 & INT_CTLR_DTS)
- edac_pci_write_dword(dev, REG_INT_CTLR, val32);
-
- /* Clear CRC Error flag on link side A */
- edac_pci_read_dword(dev, REG_LNK_CTRL_A, &val32);
- if (val32 & LNK_CTRL_CRCERR_A)
- edac_pci_write_dword(dev, REG_LNK_CTRL_A, val32);
-
- /* Clear CRC Error flag on link side B */
- edac_pci_read_dword(dev, REG_LNK_CTRL_B, &val32);
- if (val32 & LNK_CTRL_CRCERR_B)
- edac_pci_write_dword(dev, REG_LNK_CTRL_B, val32);
-
- /*
- * Then enable all error detections.
- *
- * Setup Discard Timer Sync Flood Enable,
- * System Error Enable and Parity Error Enable.
- */
- edac_pci_read_dword(dev, REG_INT_CTLR, &val32);
- val32 |= INT_CTLR_PERR | INT_CTLR_SERR | INT_CTLR_DTSE;
- edac_pci_write_dword(dev, REG_INT_CTLR, val32);
-
- /* Enable overall SERR Error detection */
- edac_pci_read_dword(dev, REG_STS_CMD, &val32);
- val32 |= STS_CMD_SERREN;
- edac_pci_write_dword(dev, REG_STS_CMD, val32);
-
- /* Setup CRC Flood Enable for link side A */
- edac_pci_read_dword(dev, REG_LNK_CTRL_A, &val32);
- val32 |= LNK_CTRL_CRCFEN;
- edac_pci_write_dword(dev, REG_LNK_CTRL_A, val32);
-
- /* Setup CRC Flood Enable for link side B */
- edac_pci_read_dword(dev, REG_LNK_CTRL_B, &val32);
- val32 |= LNK_CTRL_CRCFEN;
- edac_pci_write_dword(dev, REG_LNK_CTRL_B, val32);
-}
-
-static void amd8131_pcix_exit(struct amd8131_dev_info *dev_info)
-{
- u32 val32;
- struct pci_dev *dev = dev_info->dev;
-
- /* Disable SERR, PERR and DTSE Error detection */
- edac_pci_read_dword(dev, REG_INT_CTLR, &val32);
- val32 &= ~(INT_CTLR_PERR | INT_CTLR_SERR | INT_CTLR_DTSE);
- edac_pci_write_dword(dev, REG_INT_CTLR, val32);
-
- /* Disable overall System Error detection */
- edac_pci_read_dword(dev, REG_STS_CMD, &val32);
- val32 &= ~STS_CMD_SERREN;
- edac_pci_write_dword(dev, REG_STS_CMD, val32);
-
- /* Disable CRC Sync Flood on link side A */
- edac_pci_read_dword(dev, REG_LNK_CTRL_A, &val32);
- val32 &= ~LNK_CTRL_CRCFEN;
- edac_pci_write_dword(dev, REG_LNK_CTRL_A, val32);
-
- /* Disable CRC Sync Flood on link side B */
- edac_pci_read_dword(dev, REG_LNK_CTRL_B, &val32);
- val32 &= ~LNK_CTRL_CRCFEN;
- edac_pci_write_dword(dev, REG_LNK_CTRL_B, val32);
-}
-
-static void amd8131_pcix_check(struct edac_pci_ctl_info *edac_dev)
-{
- struct amd8131_dev_info *dev_info = edac_dev->pvt_info;
- struct pci_dev *dev = dev_info->dev;
- u32 val32;
-
- /* Check PCI-X Bridge Memory Base-Limit Register for errors */
- edac_pci_read_dword(dev, REG_MEM_LIM, &val32);
- if (val32 & MEM_LIMIT_MASK) {
- printk(KERN_INFO "Error(s) in mem limit register "
- "on %s bridge\n", dev_info->ctl_name);
- printk(KERN_INFO "DPE: %d, RSE: %d, RMA: %d\n"
- "RTA: %d, STA: %d, MDPE: %d\n",
- val32 & MEM_LIMIT_DPE,
- val32 & MEM_LIMIT_RSE,
- val32 & MEM_LIMIT_RMA,
- val32 & MEM_LIMIT_RTA,
- val32 & MEM_LIMIT_STA,
- val32 & MEM_LIMIT_MDPE);
-
- val32 |= MEM_LIMIT_MASK;
- edac_pci_write_dword(dev, REG_MEM_LIM, val32);
-
- edac_pci_handle_npe(edac_dev, edac_dev->ctl_name);
- }
-
- /* Check if Discard Timer timed out */
- edac_pci_read_dword(dev, REG_INT_CTLR, &val32);
- if (val32 & INT_CTLR_DTS) {
- printk(KERN_INFO "Error(s) in interrupt and control register "
- "on %s bridge\n", dev_info->ctl_name);
- printk(KERN_INFO "DTS: %d\n", val32 & INT_CTLR_DTS);
-
- val32 |= INT_CTLR_DTS;
- edac_pci_write_dword(dev, REG_INT_CTLR, val32);
-
- edac_pci_handle_npe(edac_dev, edac_dev->ctl_name);
- }
-
- /* Check if CRC error happens on link side A */
- edac_pci_read_dword(dev, REG_LNK_CTRL_A, &val32);
- if (val32 & LNK_CTRL_CRCERR_A) {
- printk(KERN_INFO "Error(s) in link conf and control register "
- "on %s bridge\n", dev_info->ctl_name);
- printk(KERN_INFO "CRCERR: %d\n", val32 & LNK_CTRL_CRCERR_A);
-
- val32 |= LNK_CTRL_CRCERR_A;
- edac_pci_write_dword(dev, REG_LNK_CTRL_A, val32);
-
- edac_pci_handle_npe(edac_dev, edac_dev->ctl_name);
- }
-
- /* Check if CRC error happens on link side B */
- edac_pci_read_dword(dev, REG_LNK_CTRL_B, &val32);
- if (val32 & LNK_CTRL_CRCERR_B) {
- printk(KERN_INFO "Error(s) in link conf and control register "
- "on %s bridge\n", dev_info->ctl_name);
- printk(KERN_INFO "CRCERR: %d\n", val32 & LNK_CTRL_CRCERR_B);
-
- val32 |= LNK_CTRL_CRCERR_B;
- edac_pci_write_dword(dev, REG_LNK_CTRL_B, val32);
-
- edac_pci_handle_npe(edac_dev, edac_dev->ctl_name);
- }
-}
-
-static struct amd8131_info amd8131_chipset = {
- .err_dev = PCI_DEVICE_ID_AMD_8131_APIC,
- .devices = amd8131_devices,
- .init = amd8131_pcix_init,
- .exit = amd8131_pcix_exit,
- .check = amd8131_pcix_check,
-};
-
-/*
- * There are 4 PCIX Bridges on ATCA-6101 that share the same PCI Device ID,
- * so amd8131_probe() would be called by kernel 4 times, with different
- * address of pci_dev for each of them each time.
- */
-static int amd8131_probe(struct pci_dev *dev, const struct pci_device_id *id)
-{
- struct amd8131_dev_info *dev_info;
-
- for (dev_info = amd8131_chipset.devices; dev_info->inst != NO_BRIDGE;
- dev_info++)
- if (dev_info->devfn == dev->devfn)
- break;
-
- if (dev_info->inst == NO_BRIDGE) /* should never happen */
- return -ENODEV;
-
- /*
- * We can't call pci_get_device() as we are used to do because
- * there are 4 of them but pci_dev_get() instead.
- */
- dev_info->dev = pci_dev_get(dev);
-
- if (pci_enable_device(dev_info->dev)) {
- pci_dev_put(dev_info->dev);
- printk(KERN_ERR "failed to enable:"
- "vendor %x, device %x, devfn %x, name %s\n",
- PCI_VENDOR_ID_AMD, amd8131_chipset.err_dev,
- dev_info->devfn, dev_info->ctl_name);
- return -ENODEV;
- }
-
- /*
- * we do not allocate extra private structure for
- * edac_pci_ctl_info, but make use of existing
- * one instead.
- */
- dev_info->edac_idx = edac_pci_alloc_index();
- dev_info->edac_dev = edac_pci_alloc_ctl_info(0, dev_info->ctl_name);
- if (!dev_info->edac_dev)
- return -ENOMEM;
-
- dev_info->edac_dev->pvt_info = dev_info;
- dev_info->edac_dev->dev = &dev_info->dev->dev;
- dev_info->edac_dev->mod_name = AMD8131_EDAC_MOD_STR;
- dev_info->edac_dev->ctl_name = dev_info->ctl_name;
- dev_info->edac_dev->dev_name = dev_name(&dev_info->dev->dev);
-
- if (edac_op_state == EDAC_OPSTATE_POLL)
- dev_info->edac_dev->edac_check = amd8131_chipset.check;
-
- if (amd8131_chipset.init)
- amd8131_chipset.init(dev_info);
-
- if (edac_pci_add_device(dev_info->edac_dev, dev_info->edac_idx) > 0) {
- printk(KERN_ERR "failed edac_pci_add_device() for %s\n",
- dev_info->ctl_name);
- edac_pci_free_ctl_info(dev_info->edac_dev);
- return -ENODEV;
- }
-
- printk(KERN_INFO "added one device on AMD8131 "
- "vendor %x, device %x, devfn %x, name %s\n",
- PCI_VENDOR_ID_AMD, amd8131_chipset.err_dev,
- dev_info->devfn, dev_info->ctl_name);
-
- return 0;
-}
-
-static void amd8131_remove(struct pci_dev *dev)
-{
- struct amd8131_dev_info *dev_info;
-
- for (dev_info = amd8131_chipset.devices; dev_info->inst != NO_BRIDGE;
- dev_info++)
- if (dev_info->devfn == dev->devfn)
- break;
-
- if (dev_info->inst == NO_BRIDGE) /* should never happen */
- return;
-
- if (dev_info->edac_dev) {
- edac_pci_del_device(dev_info->edac_dev->dev);
- edac_pci_free_ctl_info(dev_info->edac_dev);
- }
-
- if (amd8131_chipset.exit)
- amd8131_chipset.exit(dev_info);
-
- pci_dev_put(dev_info->dev);
-}
-
-static const struct pci_device_id amd8131_edac_pci_tbl[] = {
- {
- PCI_VEND_DEV(AMD, 8131_BRIDGE),
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .class = 0,
- .class_mask = 0,
- .driver_data = 0,
- },
- {
- 0,
- } /* table is NULL-terminated */
-};
-MODULE_DEVICE_TABLE(pci, amd8131_edac_pci_tbl);
-
-static struct pci_driver amd8131_edac_driver = {
- .name = AMD8131_EDAC_MOD_STR,
- .probe = amd8131_probe,
- .remove = amd8131_remove,
- .id_table = amd8131_edac_pci_tbl,
-};
-
-static int __init amd8131_edac_init(void)
-{
- printk(KERN_INFO "AMD8131 EDAC driver " AMD8131_EDAC_REVISION "\n");
- printk(KERN_INFO "\t(c) 2008 Wind River Systems, Inc.\n");
-
- /* Only POLL mode supported so far */
- edac_op_state = EDAC_OPSTATE_POLL;
-
- return pci_register_driver(&amd8131_edac_driver);
-}
-
-static void __exit amd8131_edac_exit(void)
-{
- pci_unregister_driver(&amd8131_edac_driver);
-}
-
-module_init(amd8131_edac_init);
-module_exit(amd8131_edac_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Cao Qingtao <qingtao.cao@windriver.com>");
-MODULE_DESCRIPTION("AMD8131 HyperTransport PCI-X Tunnel EDAC kernel module");
deleted file mode 100644
@@ -1,107 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * amd8131_edac.h, EDAC defs for AMD8131 hypertransport chip
- *
- * Copyright (c) 2008 Wind River Systems, Inc.
- *
- * Authors: Cao Qingtao <qingtao.cao@windriver.com>
- * Benjamin Walsh <benjamin.walsh@windriver.com>
- * Hu Yongqi <yongqi.hu@windriver.com>
- */
-
-#ifndef _AMD8131_EDAC_H_
-#define _AMD8131_EDAC_H_
-
-#define DEVFN_PCIX_BRIDGE_NORTH_A 8
-#define DEVFN_PCIX_BRIDGE_NORTH_B 16
-#define DEVFN_PCIX_BRIDGE_SOUTH_A 24
-#define DEVFN_PCIX_BRIDGE_SOUTH_B 32
-
-/************************************************************
- * PCI-X Bridge Status and Command Register, DevA:0x04
- ************************************************************/
-#define REG_STS_CMD 0x04
-enum sts_cmd_bits {
- STS_CMD_SSE = BIT(30),
- STS_CMD_SERREN = BIT(8)
-};
-
-/************************************************************
- * PCI-X Bridge Interrupt and Bridge Control Register,
- ************************************************************/
-#define REG_INT_CTLR 0x3c
-enum int_ctlr_bits {
- INT_CTLR_DTSE = BIT(27),
- INT_CTLR_DTS = BIT(26),
- INT_CTLR_SERR = BIT(17),
- INT_CTLR_PERR = BIT(16)
-};
-
-/************************************************************
- * PCI-X Bridge Memory Base-Limit Register, DevA:0x1C
- ************************************************************/
-#define REG_MEM_LIM 0x1c
-enum mem_limit_bits {
- MEM_LIMIT_DPE = BIT(31),
- MEM_LIMIT_RSE = BIT(30),
- MEM_LIMIT_RMA = BIT(29),
- MEM_LIMIT_RTA = BIT(28),
- MEM_LIMIT_STA = BIT(27),
- MEM_LIMIT_MDPE = BIT(24),
- MEM_LIMIT_MASK = MEM_LIMIT_DPE|MEM_LIMIT_RSE|MEM_LIMIT_RMA|
- MEM_LIMIT_RTA|MEM_LIMIT_STA|MEM_LIMIT_MDPE
-};
-
-/************************************************************
- * Link Configuration And Control Register, side A
- ************************************************************/
-#define REG_LNK_CTRL_A 0xc4
-
-/************************************************************
- * Link Configuration And Control Register, side B
- ************************************************************/
-#define REG_LNK_CTRL_B 0xc8
-
-enum lnk_ctrl_bits {
- LNK_CTRL_CRCERR_A = BIT(9),
- LNK_CTRL_CRCERR_B = BIT(8),
- LNK_CTRL_CRCFEN = BIT(1)
-};
-
-enum pcix_bridge_inst {
- NORTH_A = 0,
- NORTH_B = 1,
- SOUTH_A = 2,
- SOUTH_B = 3,
- NO_BRIDGE = 4
-};
-
-struct amd8131_dev_info {
- int devfn;
- enum pcix_bridge_inst inst;
- struct pci_dev *dev;
- int edac_idx; /* pci device index */
- char *ctl_name;
- struct edac_pci_ctl_info *edac_dev;
-};
-
-/*
- * AMD8131 chipset has two pairs of PCIX Bridge and related IOAPIC
- * Controller, and ATCA-6101 has two AMD8131 chipsets, so there are
- * four PCIX Bridges on ATCA-6101 altogether.
- *
- * These PCIX Bridges share the same PCI Device ID and are all of
- * Function Zero, they could be discrimated by their pci_dev->devfn.
- * They share the same set of init/check/exit methods, and their
- * private structures are collected in the devices[] array.
- */
-struct amd8131_info {
- u16 err_dev; /* PCI Device ID for AMD8131 APIC*/
- struct amd8131_dev_info *devices;
- void (*init)(struct amd8131_dev_info *dev_info);
- void (*exit)(struct amd8131_dev_info *dev_info);
- void (*check)(struct edac_pci_ctl_info *edac_dev);
-};
-
-#endif /* _AMD8131_EDAC_H_ */
-
These two drivers are only buildable for the powerpc "maple" platform (CONFIG_PPC_MAPLE), which has now been removed, see commit 62f8f307c80e ("powerpc/64: Remove maple platform"). Remove the drivers. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> --- drivers/edac/Kconfig | 18 -- drivers/edac/Makefile | 2 - drivers/edac/amd8111_edac.c | 596 ------------------------------------ drivers/edac/amd8111_edac.h | 118 ------- drivers/edac/amd8131_edac.c | 358 ---------------------- drivers/edac/amd8131_edac.h | 107 ------- 6 files changed, 1199 deletions(-) delete mode 100644 drivers/edac/amd8111_edac.c delete mode 100644 drivers/edac/amd8111_edac.h delete mode 100644 drivers/edac/amd8131_edac.c delete mode 100644 drivers/edac/amd8131_edac.h The removal commit is in the powerpc/next branch: https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git/log/?h=next I can take this via the powerpc tree if that's easiest, let me know.