| Message ID | 20241115164159.1081675-3-imre.deak@intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/4] drm/i915/dp_mst: Fix connector initialization in intel_dp_add_mst_connector() | expand |
On Fri, Nov 15, 2024 at 06:41:58PM +0200, Imre Deak wrote: > After a connector is added to the drm_mode_config::connector_list, it's > visible to any in-kernel users looking up connectors via the above list. > Make sure that the connector is properly initialized before such > look-ups. > > Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> > --- > drivers/gpu/drm/i915/display/intel_dp_mst.c | 29 ++++++++------------- > 1 file changed, 11 insertions(+), 18 deletions(-) > > diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c > index f058360a26413..d91a1d1fb26f4 100644 > --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c > +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c > @@ -1719,6 +1719,8 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo > if (!intel_connector) > return NULL; > > + connector = &intel_connector->base; > + > intel_connector->get_hw_state = intel_dp_mst_get_hw_state; > intel_connector->sync_state = intel_dp_connector_sync_state; > intel_connector->mst_port = intel_dp; > @@ -1727,30 +1729,19 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo > > intel_dp_init_modeset_retry_work(intel_connector); > > - /* > - * TODO: The following drm_connector specific initialization belongs > - * to DRM core, however it happens atm too late in > - * drm_connector_init(). That function will also expose the connector > - * to in-kernel users, so it can't be called until the connector is > - * sufficiently initialized; init the device pointer used by the > - * following DSC setup, until a fix moving this to DRM core. > - */ > - intel_connector->base.dev = mgr->dev; > - > - intel_connector->dp.dsc_decompression_aux = drm_dp_mst_dsc_aux_for_port(port); > - intel_dp_mst_read_decompression_port_dsc_caps(intel_dp, intel_connector); > - intel_connector->dp.dsc_hblank_expansion_quirk = > - detect_dsc_hblank_expansion_quirk(intel_connector); > - > - connector = &intel_connector->base; > - ret = drm_connector_init(display->drm, connector, &intel_dp_mst_connector_funcs, > - DRM_MODE_CONNECTOR_DisplayPort); > + ret = drm_connector_init_core(display->drm, connector, &intel_dp_mst_connector_funcs, > + DRM_MODE_CONNECTOR_DisplayPort); > if (ret) { > drm_dp_mst_put_port_malloc(port); > intel_connector_free(intel_connector); > return NULL; > } > > + intel_connector->dp.dsc_decompression_aux = drm_dp_mst_dsc_aux_for_port(port); > + intel_dp_mst_read_decompression_port_dsc_caps(intel_dp, intel_connector); > + intel_connector->dp.dsc_hblank_expansion_quirk = > + detect_dsc_hblank_expansion_quirk(intel_connector); > + > drm_connector_helper_add(connector, &intel_dp_mst_connector_helper_funcs); > > for_each_pipe(display, pipe) { > @@ -1771,6 +1762,8 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo > drm_dbg_kms(display->drm, "[%s:%d] HDCP MST init failed, skipping.\n", > connector->name, connector->base.id); > > + drm_connector_add(connector); > + > return connector; > > err: > -- > 2.44.2 >
On Fri, 15 Nov 2024, Imre Deak <imre.deak@intel.com> wrote: > After a connector is added to the drm_mode_config::connector_list, it's > visible to any in-kernel users looking up connectors via the above list. > Make sure that the connector is properly initialized before such > look-ups. > > Signed-off-by: Imre Deak <imre.deak@intel.com> > --- > drivers/gpu/drm/i915/display/intel_dp_mst.c | 29 ++++++++------------- > 1 file changed, 11 insertions(+), 18 deletions(-) > > diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c > index f058360a26413..d91a1d1fb26f4 100644 > --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c > +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c > @@ -1719,6 +1719,8 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo > if (!intel_connector) > return NULL; > > + connector = &intel_connector->base; I'd rather see a patch s/intel_connector/connector/ and using &connector->base for drm_connector. > + > intel_connector->get_hw_state = intel_dp_mst_get_hw_state; > intel_connector->sync_state = intel_dp_connector_sync_state; > intel_connector->mst_port = intel_dp; > @@ -1727,30 +1729,19 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo > > intel_dp_init_modeset_retry_work(intel_connector); > > - /* > - * TODO: The following drm_connector specific initialization belongs > - * to DRM core, however it happens atm too late in > - * drm_connector_init(). That function will also expose the connector > - * to in-kernel users, so it can't be called until the connector is > - * sufficiently initialized; init the device pointer used by the > - * following DSC setup, until a fix moving this to DRM core. > - */ > - intel_connector->base.dev = mgr->dev; > - > - intel_connector->dp.dsc_decompression_aux = drm_dp_mst_dsc_aux_for_port(port); > - intel_dp_mst_read_decompression_port_dsc_caps(intel_dp, intel_connector); > - intel_connector->dp.dsc_hblank_expansion_quirk = > - detect_dsc_hblank_expansion_quirk(intel_connector); > - > - connector = &intel_connector->base; > - ret = drm_connector_init(display->drm, connector, &intel_dp_mst_connector_funcs, > - DRM_MODE_CONNECTOR_DisplayPort); > + ret = drm_connector_init_core(display->drm, connector, &intel_dp_mst_connector_funcs, > + DRM_MODE_CONNECTOR_DisplayPort); > if (ret) { > drm_dp_mst_put_port_malloc(port); > intel_connector_free(intel_connector); > return NULL; > } > > + intel_connector->dp.dsc_decompression_aux = drm_dp_mst_dsc_aux_for_port(port); > + intel_dp_mst_read_decompression_port_dsc_caps(intel_dp, intel_connector); > + intel_connector->dp.dsc_hblank_expansion_quirk = > + detect_dsc_hblank_expansion_quirk(intel_connector); > + > drm_connector_helper_add(connector, &intel_dp_mst_connector_helper_funcs); > > for_each_pipe(display, pipe) { > @@ -1771,6 +1762,8 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo > drm_dbg_kms(display->drm, "[%s:%d] HDCP MST init failed, skipping.\n", > connector->name, connector->base.id); > > + drm_connector_add(connector); > + > return connector; > > err:
On Mon, Nov 18, 2024 at 02:12:14PM +0200, Jani Nikula wrote: > On Fri, 15 Nov 2024, Imre Deak <imre.deak@intel.com> wrote: > > After a connector is added to the drm_mode_config::connector_list, it's > > visible to any in-kernel users looking up connectors via the above list. > > Make sure that the connector is properly initialized before such > > look-ups. > > > > Signed-off-by: Imre Deak <imre.deak@intel.com> > > --- > > drivers/gpu/drm/i915/display/intel_dp_mst.c | 29 ++++++++------------- > > 1 file changed, 11 insertions(+), 18 deletions(-) > > > > diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c > > index f058360a26413..d91a1d1fb26f4 100644 > > --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c > > +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c > > @@ -1719,6 +1719,8 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo > > if (!intel_connector) > > return NULL; > > > > + connector = &intel_connector->base; > > I'd rather see a patch s/intel_connector/connector/ and using > &connector->base for drm_connector. Yes, thought the same and did it. However I think that should be done converting all the other intel_connector usage in the file. Is that ok with you? > > > + > > intel_connector->get_hw_state = intel_dp_mst_get_hw_state; > > intel_connector->sync_state = intel_dp_connector_sync_state; > > intel_connector->mst_port = intel_dp; > > @@ -1727,30 +1729,19 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo > > > > intel_dp_init_modeset_retry_work(intel_connector); > > > > - /* > > - * TODO: The following drm_connector specific initialization belongs > > - * to DRM core, however it happens atm too late in > > - * drm_connector_init(). That function will also expose the connector > > - * to in-kernel users, so it can't be called until the connector is > > - * sufficiently initialized; init the device pointer used by the > > - * following DSC setup, until a fix moving this to DRM core. > > - */ > > - intel_connector->base.dev = mgr->dev; > > - > > - intel_connector->dp.dsc_decompression_aux = drm_dp_mst_dsc_aux_for_port(port); > > - intel_dp_mst_read_decompression_port_dsc_caps(intel_dp, intel_connector); > > - intel_connector->dp.dsc_hblank_expansion_quirk = > > - detect_dsc_hblank_expansion_quirk(intel_connector); > > - > > - connector = &intel_connector->base; > > - ret = drm_connector_init(display->drm, connector, &intel_dp_mst_connector_funcs, > > - DRM_MODE_CONNECTOR_DisplayPort); > > + ret = drm_connector_init_core(display->drm, connector, &intel_dp_mst_connector_funcs, > > + DRM_MODE_CONNECTOR_DisplayPort); > > if (ret) { > > drm_dp_mst_put_port_malloc(port); > > intel_connector_free(intel_connector); > > return NULL; > > } > > > > + intel_connector->dp.dsc_decompression_aux = drm_dp_mst_dsc_aux_for_port(port); > > + intel_dp_mst_read_decompression_port_dsc_caps(intel_dp, intel_connector); > > + intel_connector->dp.dsc_hblank_expansion_quirk = > > + detect_dsc_hblank_expansion_quirk(intel_connector); > > + > > drm_connector_helper_add(connector, &intel_dp_mst_connector_helper_funcs); > > > > for_each_pipe(display, pipe) { > > @@ -1771,6 +1762,8 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo > > drm_dbg_kms(display->drm, "[%s:%d] HDCP MST init failed, skipping.\n", > > connector->name, connector->base.id); > > > > + drm_connector_add(connector); > > + > > return connector; > > > > err: > > -- > Jani Nikula, Intel
On Mon, 18 Nov 2024, Imre Deak <imre.deak@intel.com> wrote: > On Mon, Nov 18, 2024 at 02:12:14PM +0200, Jani Nikula wrote: >> On Fri, 15 Nov 2024, Imre Deak <imre.deak@intel.com> wrote: >> > After a connector is added to the drm_mode_config::connector_list, it's >> > visible to any in-kernel users looking up connectors via the above list. >> > Make sure that the connector is properly initialized before such >> > look-ups. >> > >> > Signed-off-by: Imre Deak <imre.deak@intel.com> >> > --- >> > drivers/gpu/drm/i915/display/intel_dp_mst.c | 29 ++++++++------------- >> > 1 file changed, 11 insertions(+), 18 deletions(-) >> > >> > diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c >> > index f058360a26413..d91a1d1fb26f4 100644 >> > --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c >> > +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c >> > @@ -1719,6 +1719,8 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo >> > if (!intel_connector) >> > return NULL; >> > >> > + connector = &intel_connector->base; >> >> I'd rather see a patch s/intel_connector/connector/ and using >> &connector->base for drm_connector. > > Yes, thought the same and did it. However I think that should be done > converting all the other intel_connector usage in the file. Is that ok > with you? Works for me. > >> >> > + >> > intel_connector->get_hw_state = intel_dp_mst_get_hw_state; >> > intel_connector->sync_state = intel_dp_connector_sync_state; >> > intel_connector->mst_port = intel_dp; >> > @@ -1727,30 +1729,19 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo >> > >> > intel_dp_init_modeset_retry_work(intel_connector); >> > >> > - /* >> > - * TODO: The following drm_connector specific initialization belongs >> > - * to DRM core, however it happens atm too late in >> > - * drm_connector_init(). That function will also expose the connector >> > - * to in-kernel users, so it can't be called until the connector is >> > - * sufficiently initialized; init the device pointer used by the >> > - * following DSC setup, until a fix moving this to DRM core. >> > - */ >> > - intel_connector->base.dev = mgr->dev; >> > - >> > - intel_connector->dp.dsc_decompression_aux = drm_dp_mst_dsc_aux_for_port(port); >> > - intel_dp_mst_read_decompression_port_dsc_caps(intel_dp, intel_connector); >> > - intel_connector->dp.dsc_hblank_expansion_quirk = >> > - detect_dsc_hblank_expansion_quirk(intel_connector); >> > - >> > - connector = &intel_connector->base; >> > - ret = drm_connector_init(display->drm, connector, &intel_dp_mst_connector_funcs, >> > - DRM_MODE_CONNECTOR_DisplayPort); >> > + ret = drm_connector_init_core(display->drm, connector, &intel_dp_mst_connector_funcs, >> > + DRM_MODE_CONNECTOR_DisplayPort); >> > if (ret) { >> > drm_dp_mst_put_port_malloc(port); >> > intel_connector_free(intel_connector); >> > return NULL; >> > } >> > >> > + intel_connector->dp.dsc_decompression_aux = drm_dp_mst_dsc_aux_for_port(port); >> > + intel_dp_mst_read_decompression_port_dsc_caps(intel_dp, intel_connector); >> > + intel_connector->dp.dsc_hblank_expansion_quirk = >> > + detect_dsc_hblank_expansion_quirk(intel_connector); >> > + >> > drm_connector_helper_add(connector, &intel_dp_mst_connector_helper_funcs); >> > >> > for_each_pipe(display, pipe) { >> > @@ -1771,6 +1762,8 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo >> > drm_dbg_kms(display->drm, "[%s:%d] HDCP MST init failed, skipping.\n", >> > connector->name, connector->base.id); >> > >> > + drm_connector_add(connector); >> > + >> > return connector; >> > >> > err: >> >> -- >> Jani Nikula, Intel
On Mon, Nov 18, 2024 at 02:23:48PM +0200, Jani Nikula wrote: > On Mon, 18 Nov 2024, Imre Deak <imre.deak@intel.com> wrote: > > On Mon, Nov 18, 2024 at 02:12:14PM +0200, Jani Nikula wrote: > >> On Fri, 15 Nov 2024, Imre Deak <imre.deak@intel.com> wrote: > >> > After a connector is added to the drm_mode_config::connector_list, it's > >> > visible to any in-kernel users looking up connectors via the above list. > >> > Make sure that the connector is properly initialized before such > >> > look-ups. > >> > > >> > Signed-off-by: Imre Deak <imre.deak@intel.com> > >> > --- > >> > drivers/gpu/drm/i915/display/intel_dp_mst.c | 29 ++++++++------------- > >> > 1 file changed, 11 insertions(+), 18 deletions(-) > >> > > >> > diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c > >> > index f058360a26413..d91a1d1fb26f4 100644 > >> > --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c > >> > +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c > >> > @@ -1719,6 +1719,8 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo > >> > if (!intel_connector) > >> > return NULL; > >> > > >> > + connector = &intel_connector->base; > >> > >> I'd rather see a patch s/intel_connector/connector/ and using > >> &connector->base for drm_connector. > > > > Yes, thought the same and did it. However I think that should be done > > converting all the other intel_connector usage in the file. Is that ok > > with you? > > Works for me. Ok, will add that in a separate patch then. > >> > + > >> > intel_connector->get_hw_state = intel_dp_mst_get_hw_state; > >> > intel_connector->sync_state = intel_dp_connector_sync_state; > >> > intel_connector->mst_port = intel_dp; > >> > @@ -1727,30 +1729,19 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo > >> > > >> > intel_dp_init_modeset_retry_work(intel_connector); > >> > > >> > - /* > >> > - * TODO: The following drm_connector specific initialization belongs > >> > - * to DRM core, however it happens atm too late in > >> > - * drm_connector_init(). That function will also expose the connector > >> > - * to in-kernel users, so it can't be called until the connector is > >> > - * sufficiently initialized; init the device pointer used by the > >> > - * following DSC setup, until a fix moving this to DRM core. > >> > - */ > >> > - intel_connector->base.dev = mgr->dev; > >> > - > >> > - intel_connector->dp.dsc_decompression_aux = drm_dp_mst_dsc_aux_for_port(port); > >> > - intel_dp_mst_read_decompression_port_dsc_caps(intel_dp, intel_connector); > >> > - intel_connector->dp.dsc_hblank_expansion_quirk = > >> > - detect_dsc_hblank_expansion_quirk(intel_connector); > >> > - > >> > - connector = &intel_connector->base; > >> > - ret = drm_connector_init(display->drm, connector, &intel_dp_mst_connector_funcs, > >> > - DRM_MODE_CONNECTOR_DisplayPort); > >> > + ret = drm_connector_init_core(display->drm, connector, &intel_dp_mst_connector_funcs, > >> > + DRM_MODE_CONNECTOR_DisplayPort); > >> > if (ret) { > >> > drm_dp_mst_put_port_malloc(port); > >> > intel_connector_free(intel_connector); > >> > return NULL; > >> > } > >> > > >> > + intel_connector->dp.dsc_decompression_aux = drm_dp_mst_dsc_aux_for_port(port); > >> > + intel_dp_mst_read_decompression_port_dsc_caps(intel_dp, intel_connector); > >> > + intel_connector->dp.dsc_hblank_expansion_quirk = > >> > + detect_dsc_hblank_expansion_quirk(intel_connector); > >> > + > >> > drm_connector_helper_add(connector, &intel_dp_mst_connector_helper_funcs); > >> > > >> > for_each_pipe(display, pipe) { > >> > @@ -1771,6 +1762,8 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo > >> > drm_dbg_kms(display->drm, "[%s:%d] HDCP MST init failed, skipping.\n", > >> > connector->name, connector->base.id); > >> > > >> > + drm_connector_add(connector); > >> > + > >> > return connector; > >> > > >> > err: > >> > >> -- > >> Jani Nikula, Intel > > -- > Jani Nikula, Intel
diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c index f058360a26413..d91a1d1fb26f4 100644 --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c @@ -1719,6 +1719,8 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo if (!intel_connector) return NULL; + connector = &intel_connector->base; + intel_connector->get_hw_state = intel_dp_mst_get_hw_state; intel_connector->sync_state = intel_dp_connector_sync_state; intel_connector->mst_port = intel_dp; @@ -1727,30 +1729,19 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo intel_dp_init_modeset_retry_work(intel_connector); - /* - * TODO: The following drm_connector specific initialization belongs - * to DRM core, however it happens atm too late in - * drm_connector_init(). That function will also expose the connector - * to in-kernel users, so it can't be called until the connector is - * sufficiently initialized; init the device pointer used by the - * following DSC setup, until a fix moving this to DRM core. - */ - intel_connector->base.dev = mgr->dev; - - intel_connector->dp.dsc_decompression_aux = drm_dp_mst_dsc_aux_for_port(port); - intel_dp_mst_read_decompression_port_dsc_caps(intel_dp, intel_connector); - intel_connector->dp.dsc_hblank_expansion_quirk = - detect_dsc_hblank_expansion_quirk(intel_connector); - - connector = &intel_connector->base; - ret = drm_connector_init(display->drm, connector, &intel_dp_mst_connector_funcs, - DRM_MODE_CONNECTOR_DisplayPort); + ret = drm_connector_init_core(display->drm, connector, &intel_dp_mst_connector_funcs, + DRM_MODE_CONNECTOR_DisplayPort); if (ret) { drm_dp_mst_put_port_malloc(port); intel_connector_free(intel_connector); return NULL; } + intel_connector->dp.dsc_decompression_aux = drm_dp_mst_dsc_aux_for_port(port); + intel_dp_mst_read_decompression_port_dsc_caps(intel_dp, intel_connector); + intel_connector->dp.dsc_hblank_expansion_quirk = + detect_dsc_hblank_expansion_quirk(intel_connector); + drm_connector_helper_add(connector, &intel_dp_mst_connector_helper_funcs); for_each_pipe(display, pipe) { @@ -1771,6 +1762,8 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo drm_dbg_kms(display->drm, "[%s:%d] HDCP MST init failed, skipping.\n", connector->name, connector->base.id); + drm_connector_add(connector); + return connector; err:
After a connector is added to the drm_mode_config::connector_list, it's visible to any in-kernel users looking up connectors via the above list. Make sure that the connector is properly initialized before such look-ups. Signed-off-by: Imre Deak <imre.deak@intel.com> --- drivers/gpu/drm/i915/display/intel_dp_mst.c | 29 ++++++++------------- 1 file changed, 11 insertions(+), 18 deletions(-)