| Message ID | 20241116190800.1870975-2-zlang@kernel.org (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | fstests: fix test issue of xfs/157 | expand |
On Sun, Nov 17, 2024 at 03:07:59AM +0800, Zorro Lang wrote: > To give more arguments to _scratch_mkfs_sized, we generally do as: > > MKFS_OPTIONS="-L oldlabel $MKFS_OPTIONS" _scratch_mkfs_sized $fs_size > > to give "-L oldlabel" to it. But if _scratch_mkfs_sized fails, it > will get rid of the whole MKFS_OPTIONS and try to mkfs again. > Likes: > > ** mkfs failed with extra mkfs options added to "-L oldlabel -m rmapbt=1" by test 157 ** > ** attempting to mkfs using only test 157 options: -d size=524288000 -b size=4096 ** > > But that's not the fault of "-L oldlabel". So for keeping the mkfs > options ("-L oldlabel") we need, we'd better to let the > scratch_mkfs_sized to support extra arguments, rather than using > global MKFS_OPTIONS. > > Signed-off-by: Zorro Lang <zlang@kernel.org> > --- > common/rc | 34 ++++++++++++++++++---------------- > 1 file changed, 18 insertions(+), 16 deletions(-) > > diff --git a/common/rc b/common/rc > index 2af26f23f..ce8602383 100644 > --- a/common/rc > +++ b/common/rc > @@ -1023,11 +1023,13 @@ _small_fs_size_mb() > } > > # Create fs of certain size on scratch device > -# _try_scratch_mkfs_sized <size in bytes> [optional blocksize] > +# _try_scratch_mkfs_sized <size in bytes> [optional blocksize] [other options] > _try_scratch_mkfs_sized() > { > local fssize=$1 > - local blocksize=$2 > + shift > + local blocksize=$1 > + shift > local def_blksz > local blocksize_opt > local rt_ops > @@ -1091,10 +1093,10 @@ _try_scratch_mkfs_sized() > # don't override MKFS_OPTIONS that set a block size. > echo $MKFS_OPTIONS |grep -E -q "b\s*size=" > if [ $? -eq 0 ]; then > - _try_scratch_mkfs_xfs -d size=$fssize $rt_ops > + _try_scratch_mkfs_xfs -d size=$fssize $rt_ops "$@" > else > _try_scratch_mkfs_xfs -d size=$fssize $rt_ops \ > - -b size=$blocksize > + -b size=$blocksize "$@" > fi > ;; > ext2|ext3|ext4) > @@ -1105,7 +1107,7 @@ _try_scratch_mkfs_sized() > _notrun "Could not make scratch logdev" > MKFS_OPTIONS="$MKFS_OPTIONS -J device=$SCRATCH_LOGDEV" > fi > - ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks > + ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize "$@" $SCRATCH_DEV $blocks > ;; > gfs2) > # mkfs.gfs2 doesn't automatically shrink journal files on small > @@ -1120,13 +1122,13 @@ _try_scratch_mkfs_sized() > (( journal_size >= min_journal_size )) || journal_size=$min_journal_size > MKFS_OPTIONS="-J $journal_size $MKFS_OPTIONS" > fi > - ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS -O -b $blocksize $SCRATCH_DEV $blocks > + ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS -O -b $blocksize "$@" $SCRATCH_DEV $blocks > ;; > ocfs2) > - yes | ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks > + yes | ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize "$@" $SCRATCH_DEV $blocks > ;; > udf) > - $MKFS_UDF_PROG $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks > + $MKFS_UDF_PROG $MKFS_OPTIONS -b $blocksize "$@" $SCRATCH_DEV $blocks > ;; > btrfs) > local mixed_opt= > @@ -1134,33 +1136,33 @@ _try_scratch_mkfs_sized() > # the device is not zoned. Ref: btrfs-progs: btrfs_min_dev_size() > (( fssize < $((256 * 1024 * 1024)) )) && > ! _scratch_btrfs_is_zoned && mixed_opt='--mixed' > - $MKFS_BTRFS_PROG $MKFS_OPTIONS $mixed_opt -b $fssize $SCRATCH_DEV > + $MKFS_BTRFS_PROG $MKFS_OPTIONS $mixed_opt -b $fssize "$@" $SCRATCH_DEV > ;; > jfs) > - ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS $SCRATCH_DEV $blocks > + ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS "$@" $SCRATCH_DEV $blocks > ;; > reiserfs) > - ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks > + ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS -b $blocksize "$@" $SCRATCH_DEV $blocks > ;; > reiser4) > # mkfs.resier4 requires size in KB as input for creating filesystem > - $MKFS_REISER4_PROG $MKFS_OPTIONS -y -b $blocksize $SCRATCH_DEV \ > + $MKFS_REISER4_PROG $MKFS_OPTIONS -y -b $blocksize "$@" $SCRATCH_DEV \ > `expr $fssize / 1024` > ;; > f2fs) > # mkfs.f2fs requires # of sectors as an input for the size > local sector_size=`blockdev --getss $SCRATCH_DEV` > - $MKFS_F2FS_PROG $MKFS_OPTIONS $SCRATCH_DEV `expr $fssize / $sector_size` > + $MKFS_F2FS_PROG $MKFS_OPTIONS "$@" $SCRATCH_DEV `expr $fssize / $sector_size` > ;; > tmpfs) > local free_mem=`_free_memory_bytes` > if [ "$free_mem" -lt "$fssize" ] ; then > _notrun "Not enough memory ($free_mem) for tmpfs with $fssize bytes" > fi > - export MOUNT_OPTIONS="-o size=$fssize $TMPFS_MOUNT_OPTIONS" > + export MOUNT_OPTIONS="-o size=$fssize "$@" $TMPFS_MOUNT_OPTIONS" > ;; > bcachefs) > - $MKFS_BCACHEFS_PROG $MKFS_OPTIONS --fs_size=$fssize $blocksize_opt $SCRATCH_DEV > + $MKFS_BCACHEFS_PROG $MKFS_OPTIONS --fs_size=$fssize $blocksize_opt "$@" $SCRATCH_DEV > ;; > *) > _notrun "Filesystem $FSTYP not supported in _scratch_mkfs_sized" > @@ -1170,7 +1172,7 @@ _try_scratch_mkfs_sized() > > _scratch_mkfs_sized() > { > - _try_scratch_mkfs_sized $* || _notrun "_scratch_mkfs_sized failed with ($*)" > + _try_scratch_mkfs_sized "$@" || _notrun "_scratch_mkfs_sized failed with ($@)" Nit: Don't use '$@' within a longer string -- either it's "$@" so that each element in the arg array is rendered individually as a separate string parameter to the program being called, or "foo $*" so that you end up with a single string. shellcheck will complain about that, though bash itself doesn't seem to care. --D > } > > # Emulate an N-data-disk stripe w/ various stripe units > -- > 2.45.2 > >
On Mon, Nov 18, 2024 at 02:21:36PM -0800, Darrick J. Wong wrote: > On Sun, Nov 17, 2024 at 03:07:59AM +0800, Zorro Lang wrote: > > To give more arguments to _scratch_mkfs_sized, we generally do as: > > > > MKFS_OPTIONS="-L oldlabel $MKFS_OPTIONS" _scratch_mkfs_sized $fs_size > > > > to give "-L oldlabel" to it. But if _scratch_mkfs_sized fails, it > > will get rid of the whole MKFS_OPTIONS and try to mkfs again. > > Likes: > > > > ** mkfs failed with extra mkfs options added to "-L oldlabel -m rmapbt=1" by test 157 ** > > ** attempting to mkfs using only test 157 options: -d size=524288000 -b size=4096 ** > > > > But that's not the fault of "-L oldlabel". So for keeping the mkfs > > options ("-L oldlabel") we need, we'd better to let the > > scratch_mkfs_sized to support extra arguments, rather than using > > global MKFS_OPTIONS. > > > > Signed-off-by: Zorro Lang <zlang@kernel.org> > > --- > > common/rc | 34 ++++++++++++++++++---------------- > > 1 file changed, 18 insertions(+), 16 deletions(-) > > > > diff --git a/common/rc b/common/rc > > index 2af26f23f..ce8602383 100644 > > --- a/common/rc > > +++ b/common/rc > > @@ -1023,11 +1023,13 @@ _small_fs_size_mb() > > } > > > > # Create fs of certain size on scratch device > > -# _try_scratch_mkfs_sized <size in bytes> [optional blocksize] > > +# _try_scratch_mkfs_sized <size in bytes> [optional blocksize] [other options] > > _try_scratch_mkfs_sized() > > { > > local fssize=$1 > > - local blocksize=$2 > > + shift > > + local blocksize=$1 > > + shift > > local def_blksz > > local blocksize_opt > > local rt_ops > > @@ -1091,10 +1093,10 @@ _try_scratch_mkfs_sized() > > # don't override MKFS_OPTIONS that set a block size. > > echo $MKFS_OPTIONS |grep -E -q "b\s*size=" > > if [ $? -eq 0 ]; then > > - _try_scratch_mkfs_xfs -d size=$fssize $rt_ops > > + _try_scratch_mkfs_xfs -d size=$fssize $rt_ops "$@" > > else > > _try_scratch_mkfs_xfs -d size=$fssize $rt_ops \ > > - -b size=$blocksize > > + -b size=$blocksize "$@" > > fi > > ;; > > ext2|ext3|ext4) > > @@ -1105,7 +1107,7 @@ _try_scratch_mkfs_sized() > > _notrun "Could not make scratch logdev" > > MKFS_OPTIONS="$MKFS_OPTIONS -J device=$SCRATCH_LOGDEV" > > fi > > - ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks > > + ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize "$@" $SCRATCH_DEV $blocks > > ;; > > gfs2) > > # mkfs.gfs2 doesn't automatically shrink journal files on small > > @@ -1120,13 +1122,13 @@ _try_scratch_mkfs_sized() > > (( journal_size >= min_journal_size )) || journal_size=$min_journal_size > > MKFS_OPTIONS="-J $journal_size $MKFS_OPTIONS" > > fi > > - ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS -O -b $blocksize $SCRATCH_DEV $blocks > > + ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS -O -b $blocksize "$@" $SCRATCH_DEV $blocks > > ;; > > ocfs2) > > - yes | ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks > > + yes | ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize "$@" $SCRATCH_DEV $blocks > > ;; > > udf) > > - $MKFS_UDF_PROG $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks > > + $MKFS_UDF_PROG $MKFS_OPTIONS -b $blocksize "$@" $SCRATCH_DEV $blocks > > ;; > > btrfs) > > local mixed_opt= > > @@ -1134,33 +1136,33 @@ _try_scratch_mkfs_sized() > > # the device is not zoned. Ref: btrfs-progs: btrfs_min_dev_size() > > (( fssize < $((256 * 1024 * 1024)) )) && > > ! _scratch_btrfs_is_zoned && mixed_opt='--mixed' > > - $MKFS_BTRFS_PROG $MKFS_OPTIONS $mixed_opt -b $fssize $SCRATCH_DEV > > + $MKFS_BTRFS_PROG $MKFS_OPTIONS $mixed_opt -b $fssize "$@" $SCRATCH_DEV > > ;; > > jfs) > > - ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS $SCRATCH_DEV $blocks > > + ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS "$@" $SCRATCH_DEV $blocks > > ;; > > reiserfs) > > - ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks > > + ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS -b $blocksize "$@" $SCRATCH_DEV $blocks > > ;; > > reiser4) > > # mkfs.resier4 requires size in KB as input for creating filesystem > > - $MKFS_REISER4_PROG $MKFS_OPTIONS -y -b $blocksize $SCRATCH_DEV \ > > + $MKFS_REISER4_PROG $MKFS_OPTIONS -y -b $blocksize "$@" $SCRATCH_DEV \ > > `expr $fssize / 1024` > > ;; > > f2fs) > > # mkfs.f2fs requires # of sectors as an input for the size > > local sector_size=`blockdev --getss $SCRATCH_DEV` > > - $MKFS_F2FS_PROG $MKFS_OPTIONS $SCRATCH_DEV `expr $fssize / $sector_size` > > + $MKFS_F2FS_PROG $MKFS_OPTIONS "$@" $SCRATCH_DEV `expr $fssize / $sector_size` > > ;; > > tmpfs) > > local free_mem=`_free_memory_bytes` > > if [ "$free_mem" -lt "$fssize" ] ; then > > _notrun "Not enough memory ($free_mem) for tmpfs with $fssize bytes" > > fi > > - export MOUNT_OPTIONS="-o size=$fssize $TMPFS_MOUNT_OPTIONS" > > + export MOUNT_OPTIONS="-o size=$fssize "$@" $TMPFS_MOUNT_OPTIONS" > > ;; > > bcachefs) > > - $MKFS_BCACHEFS_PROG $MKFS_OPTIONS --fs_size=$fssize $blocksize_opt $SCRATCH_DEV > > + $MKFS_BCACHEFS_PROG $MKFS_OPTIONS --fs_size=$fssize $blocksize_opt "$@" $SCRATCH_DEV > > ;; > > *) > > _notrun "Filesystem $FSTYP not supported in _scratch_mkfs_sized" > > @@ -1170,7 +1172,7 @@ _try_scratch_mkfs_sized() > > > > _scratch_mkfs_sized() > > { > > - _try_scratch_mkfs_sized $* || _notrun "_scratch_mkfs_sized failed with ($*)" > > + _try_scratch_mkfs_sized "$@" || _notrun "_scratch_mkfs_sized failed with ($@)" > > Nit: Don't use '$@' within a longer string -- either it's "$@" so that > each element in the arg array is rendered individually as a separate > string parameter to the program being called, or "foo $*" so that you > end up with a single string. > > shellcheck will complain about that, though bash itself doesn't seem to > care. Oh, also, as I was rebasing my branch atop yours, I wondered, should this patch convert these MKFS_OPTIONS overrides? ext4/059 ext4/060 xfs/107 xfs/547 --D > --D > > > } > > > > # Emulate an N-data-disk stripe w/ various stripe units > > -- > > 2.45.2 > > > > >
On Mon, Nov 18, 2024 at 02:21:36PM -0800, Darrick J. Wong wrote: > On Sun, Nov 17, 2024 at 03:07:59AM +0800, Zorro Lang wrote: > > To give more arguments to _scratch_mkfs_sized, we generally do as: > > > > MKFS_OPTIONS="-L oldlabel $MKFS_OPTIONS" _scratch_mkfs_sized $fs_size > > > > to give "-L oldlabel" to it. But if _scratch_mkfs_sized fails, it > > will get rid of the whole MKFS_OPTIONS and try to mkfs again. > > Likes: > > > > ** mkfs failed with extra mkfs options added to "-L oldlabel -m rmapbt=1" by test 157 ** > > ** attempting to mkfs using only test 157 options: -d size=524288000 -b size=4096 ** > > > > But that's not the fault of "-L oldlabel". So for keeping the mkfs > > options ("-L oldlabel") we need, we'd better to let the > > scratch_mkfs_sized to support extra arguments, rather than using > > global MKFS_OPTIONS. > > > > Signed-off-by: Zorro Lang <zlang@kernel.org> > > --- > > common/rc | 34 ++++++++++++++++++---------------- > > 1 file changed, 18 insertions(+), 16 deletions(-) > > > > diff --git a/common/rc b/common/rc > > index 2af26f23f..ce8602383 100644 > > --- a/common/rc > > +++ b/common/rc > > @@ -1023,11 +1023,13 @@ _small_fs_size_mb() > > } > > > > # Create fs of certain size on scratch device > > -# _try_scratch_mkfs_sized <size in bytes> [optional blocksize] > > +# _try_scratch_mkfs_sized <size in bytes> [optional blocksize] [other options] > > _try_scratch_mkfs_sized() > > { > > local fssize=$1 > > - local blocksize=$2 > > + shift > > + local blocksize=$1 > > + shift > > local def_blksz > > local blocksize_opt > > local rt_ops > > @@ -1091,10 +1093,10 @@ _try_scratch_mkfs_sized() > > # don't override MKFS_OPTIONS that set a block size. > > echo $MKFS_OPTIONS |grep -E -q "b\s*size=" > > if [ $? -eq 0 ]; then > > - _try_scratch_mkfs_xfs -d size=$fssize $rt_ops > > + _try_scratch_mkfs_xfs -d size=$fssize $rt_ops "$@" > > else > > _try_scratch_mkfs_xfs -d size=$fssize $rt_ops \ > > - -b size=$blocksize > > + -b size=$blocksize "$@" > > fi > > ;; > > ext2|ext3|ext4) > > @@ -1105,7 +1107,7 @@ _try_scratch_mkfs_sized() > > _notrun "Could not make scratch logdev" > > MKFS_OPTIONS="$MKFS_OPTIONS -J device=$SCRATCH_LOGDEV" > > fi > > - ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks > > + ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize "$@" $SCRATCH_DEV $blocks > > ;; > > gfs2) > > # mkfs.gfs2 doesn't automatically shrink journal files on small > > @@ -1120,13 +1122,13 @@ _try_scratch_mkfs_sized() > > (( journal_size >= min_journal_size )) || journal_size=$min_journal_size > > MKFS_OPTIONS="-J $journal_size $MKFS_OPTIONS" > > fi > > - ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS -O -b $blocksize $SCRATCH_DEV $blocks > > + ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS -O -b $blocksize "$@" $SCRATCH_DEV $blocks > > ;; > > ocfs2) > > - yes | ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks > > + yes | ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize "$@" $SCRATCH_DEV $blocks > > ;; > > udf) > > - $MKFS_UDF_PROG $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks > > + $MKFS_UDF_PROG $MKFS_OPTIONS -b $blocksize "$@" $SCRATCH_DEV $blocks > > ;; > > btrfs) > > local mixed_opt= > > @@ -1134,33 +1136,33 @@ _try_scratch_mkfs_sized() > > # the device is not zoned. Ref: btrfs-progs: btrfs_min_dev_size() > > (( fssize < $((256 * 1024 * 1024)) )) && > > ! _scratch_btrfs_is_zoned && mixed_opt='--mixed' > > - $MKFS_BTRFS_PROG $MKFS_OPTIONS $mixed_opt -b $fssize $SCRATCH_DEV > > + $MKFS_BTRFS_PROG $MKFS_OPTIONS $mixed_opt -b $fssize "$@" $SCRATCH_DEV > > ;; > > jfs) > > - ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS $SCRATCH_DEV $blocks > > + ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS "$@" $SCRATCH_DEV $blocks > > ;; > > reiserfs) > > - ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks > > + ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS -b $blocksize "$@" $SCRATCH_DEV $blocks > > ;; > > reiser4) > > # mkfs.resier4 requires size in KB as input for creating filesystem > > - $MKFS_REISER4_PROG $MKFS_OPTIONS -y -b $blocksize $SCRATCH_DEV \ > > + $MKFS_REISER4_PROG $MKFS_OPTIONS -y -b $blocksize "$@" $SCRATCH_DEV \ > > `expr $fssize / 1024` > > ;; > > f2fs) > > # mkfs.f2fs requires # of sectors as an input for the size > > local sector_size=`blockdev --getss $SCRATCH_DEV` > > - $MKFS_F2FS_PROG $MKFS_OPTIONS $SCRATCH_DEV `expr $fssize / $sector_size` > > + $MKFS_F2FS_PROG $MKFS_OPTIONS "$@" $SCRATCH_DEV `expr $fssize / $sector_size` > > ;; > > tmpfs) > > local free_mem=`_free_memory_bytes` > > if [ "$free_mem" -lt "$fssize" ] ; then > > _notrun "Not enough memory ($free_mem) for tmpfs with $fssize bytes" > > fi > > - export MOUNT_OPTIONS="-o size=$fssize $TMPFS_MOUNT_OPTIONS" > > + export MOUNT_OPTIONS="-o size=$fssize "$@" $TMPFS_MOUNT_OPTIONS" > > ;; > > bcachefs) > > - $MKFS_BCACHEFS_PROG $MKFS_OPTIONS --fs_size=$fssize $blocksize_opt $SCRATCH_DEV > > + $MKFS_BCACHEFS_PROG $MKFS_OPTIONS --fs_size=$fssize $blocksize_opt "$@" $SCRATCH_DEV > > ;; > > *) > > _notrun "Filesystem $FSTYP not supported in _scratch_mkfs_sized" > > @@ -1170,7 +1172,7 @@ _try_scratch_mkfs_sized() > > > > _scratch_mkfs_sized() > > { > > - _try_scratch_mkfs_sized $* || _notrun "_scratch_mkfs_sized failed with ($*)" > > + _try_scratch_mkfs_sized "$@" || _notrun "_scratch_mkfs_sized failed with ($@)" > > Nit: Don't use '$@' within a longer string -- either it's "$@" so that > each element in the arg array is rendered individually as a separate > string parameter to the program being called, or "foo $*" so that you > end up with a single string. Hi Darrick, do you mean I should keep the later $*? Likes: _try_scratch_mkfs_sized "$@" || _notrun "_scratch_mkfs_sized failed with ($*)" > > shellcheck will complain about that, though bash itself doesn't seem to > care. > > --D > > > } > > > > # Emulate an N-data-disk stripe w/ various stripe units > > -- > > 2.45.2 > > > > >
diff --git a/common/rc b/common/rc index 2af26f23f..ce8602383 100644 --- a/common/rc +++ b/common/rc @@ -1023,11 +1023,13 @@ _small_fs_size_mb() } # Create fs of certain size on scratch device -# _try_scratch_mkfs_sized <size in bytes> [optional blocksize] +# _try_scratch_mkfs_sized <size in bytes> [optional blocksize] [other options] _try_scratch_mkfs_sized() { local fssize=$1 - local blocksize=$2 + shift + local blocksize=$1 + shift local def_blksz local blocksize_opt local rt_ops @@ -1091,10 +1093,10 @@ _try_scratch_mkfs_sized() # don't override MKFS_OPTIONS that set a block size. echo $MKFS_OPTIONS |grep -E -q "b\s*size=" if [ $? -eq 0 ]; then - _try_scratch_mkfs_xfs -d size=$fssize $rt_ops + _try_scratch_mkfs_xfs -d size=$fssize $rt_ops "$@" else _try_scratch_mkfs_xfs -d size=$fssize $rt_ops \ - -b size=$blocksize + -b size=$blocksize "$@" fi ;; ext2|ext3|ext4) @@ -1105,7 +1107,7 @@ _try_scratch_mkfs_sized() _notrun "Could not make scratch logdev" MKFS_OPTIONS="$MKFS_OPTIONS -J device=$SCRATCH_LOGDEV" fi - ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks + ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize "$@" $SCRATCH_DEV $blocks ;; gfs2) # mkfs.gfs2 doesn't automatically shrink journal files on small @@ -1120,13 +1122,13 @@ _try_scratch_mkfs_sized() (( journal_size >= min_journal_size )) || journal_size=$min_journal_size MKFS_OPTIONS="-J $journal_size $MKFS_OPTIONS" fi - ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS -O -b $blocksize $SCRATCH_DEV $blocks + ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS -O -b $blocksize "$@" $SCRATCH_DEV $blocks ;; ocfs2) - yes | ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks + yes | ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize "$@" $SCRATCH_DEV $blocks ;; udf) - $MKFS_UDF_PROG $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks + $MKFS_UDF_PROG $MKFS_OPTIONS -b $blocksize "$@" $SCRATCH_DEV $blocks ;; btrfs) local mixed_opt= @@ -1134,33 +1136,33 @@ _try_scratch_mkfs_sized() # the device is not zoned. Ref: btrfs-progs: btrfs_min_dev_size() (( fssize < $((256 * 1024 * 1024)) )) && ! _scratch_btrfs_is_zoned && mixed_opt='--mixed' - $MKFS_BTRFS_PROG $MKFS_OPTIONS $mixed_opt -b $fssize $SCRATCH_DEV + $MKFS_BTRFS_PROG $MKFS_OPTIONS $mixed_opt -b $fssize "$@" $SCRATCH_DEV ;; jfs) - ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS $SCRATCH_DEV $blocks + ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS "$@" $SCRATCH_DEV $blocks ;; reiserfs) - ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks + ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS -b $blocksize "$@" $SCRATCH_DEV $blocks ;; reiser4) # mkfs.resier4 requires size in KB as input for creating filesystem - $MKFS_REISER4_PROG $MKFS_OPTIONS -y -b $blocksize $SCRATCH_DEV \ + $MKFS_REISER4_PROG $MKFS_OPTIONS -y -b $blocksize "$@" $SCRATCH_DEV \ `expr $fssize / 1024` ;; f2fs) # mkfs.f2fs requires # of sectors as an input for the size local sector_size=`blockdev --getss $SCRATCH_DEV` - $MKFS_F2FS_PROG $MKFS_OPTIONS $SCRATCH_DEV `expr $fssize / $sector_size` + $MKFS_F2FS_PROG $MKFS_OPTIONS "$@" $SCRATCH_DEV `expr $fssize / $sector_size` ;; tmpfs) local free_mem=`_free_memory_bytes` if [ "$free_mem" -lt "$fssize" ] ; then _notrun "Not enough memory ($free_mem) for tmpfs with $fssize bytes" fi - export MOUNT_OPTIONS="-o size=$fssize $TMPFS_MOUNT_OPTIONS" + export MOUNT_OPTIONS="-o size=$fssize "$@" $TMPFS_MOUNT_OPTIONS" ;; bcachefs) - $MKFS_BCACHEFS_PROG $MKFS_OPTIONS --fs_size=$fssize $blocksize_opt $SCRATCH_DEV + $MKFS_BCACHEFS_PROG $MKFS_OPTIONS --fs_size=$fssize $blocksize_opt "$@" $SCRATCH_DEV ;; *) _notrun "Filesystem $FSTYP not supported in _scratch_mkfs_sized" @@ -1170,7 +1172,7 @@ _try_scratch_mkfs_sized() _scratch_mkfs_sized() { - _try_scratch_mkfs_sized $* || _notrun "_scratch_mkfs_sized failed with ($*)" + _try_scratch_mkfs_sized "$@" || _notrun "_scratch_mkfs_sized failed with ($@)" } # Emulate an N-data-disk stripe w/ various stripe units
To give more arguments to _scratch_mkfs_sized, we generally do as: MKFS_OPTIONS="-L oldlabel $MKFS_OPTIONS" _scratch_mkfs_sized $fs_size to give "-L oldlabel" to it. But if _scratch_mkfs_sized fails, it will get rid of the whole MKFS_OPTIONS and try to mkfs again. Likes: ** mkfs failed with extra mkfs options added to "-L oldlabel -m rmapbt=1" by test 157 ** ** attempting to mkfs using only test 157 options: -d size=524288000 -b size=4096 ** But that's not the fault of "-L oldlabel". So for keeping the mkfs options ("-L oldlabel") we need, we'd better to let the scratch_mkfs_sized to support extra arguments, rather than using global MKFS_OPTIONS. Signed-off-by: Zorro Lang <zlang@kernel.org> --- common/rc | 34 ++++++++++++++++++---------------- 1 file changed, 18 insertions(+), 16 deletions(-)