Message ID | 20241119174954.1219002-6-quic_wasimn@quicinc.com (mailing list archive) |
---|---|
State | New |
Headers | show |
Series | arm64: qcom: Add support for QCS9075 boards | expand |
On Tue, Nov 19, 2024 at 11:19:54PM +0530, Wasim Nazir wrote: > Add device tree support for QCS9075 Ride & Ride-r3 boards. > QCS9075 Ride & Ride-r3 are similar to QCS9100 Ride and Ride-r3 > boards but without safety monitoring feature of SAfety-IsLand > subsystem. > > Difference between ride and ride-r3 is the ethernet phy. > Ride uses 1G ethernet phy while ride-r3 uses 2.5G ethernet phy. > > Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com> > --- Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
On 19/11/2024 18:49, Wasim Nazir wrote: > Add device tree support for QCS9075 Ride & Ride-r3 boards. > QCS9075 Ride & Ride-r3 are similar to QCS9100 Ride and Ride-r3 > boards but without safety monitoring feature of SAfety-IsLand > subsystem. > > Difference between ride and ride-r3 is the ethernet phy. > Ride uses 1G ethernet phy while ride-r3 uses 2.5G ethernet phy. > > Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com> > --- > arch/arm64/boot/dts/qcom/Makefile | 2 ++ > arch/arm64/boot/dts/qcom/qcs9075-ride-r3.dts | 12 ++++++++++++ > arch/arm64/boot/dts/qcom/qcs9075-ride.dts | 12 ++++++++++++ > 3 files changed, 26 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/qcs9075-ride-r3.dts > create mode 100644 arch/arm64/boot/dts/qcom/qcs9075-ride.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index 5d9847119f2e..91c811aca2ca 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -116,6 +116,8 @@ dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs9075-rb8.dtb > +dtb-$(CONFIG_ARCH_QCOM) += qcs9075-ride.dtb > +dtb-$(CONFIG_ARCH_QCOM) += qcs9075-ride-r3.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride-r3.dtb > dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb > diff --git a/arch/arm64/boot/dts/qcom/qcs9075-ride-r3.dts b/arch/arm64/boot/dts/qcom/qcs9075-ride-r3.dts > new file mode 100644 > index 000000000000..a04c8d1fa258 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/qcs9075-ride-r3.dts > @@ -0,0 +1,12 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. > + */ > +/dts-v1/; > + > +#include "sa8775p-ride-r3.dts" No guys, you are making these things up. This is EXACTLY the same as qcs9100. NAK Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 5d9847119f2e..91c811aca2ca 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -116,6 +116,8 @@ dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs9075-rb8.dtb +dtb-$(CONFIG_ARCH_QCOM) += qcs9075-ride.dtb +dtb-$(CONFIG_ARCH_QCOM) += qcs9075-ride-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb diff --git a/arch/arm64/boot/dts/qcom/qcs9075-ride-r3.dts b/arch/arm64/boot/dts/qcom/qcs9075-ride-r3.dts new file mode 100644 index 000000000000..a04c8d1fa258 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs9075-ride-r3.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. + */ +/dts-v1/; + +#include "sa8775p-ride-r3.dts" + +/ { + model = "Qualcomm Technologies, Inc. QCS9075 Ride Rev3"; + compatible = "qcom,qcs9075-ride-r3", "qcom,qcs9075", "qcom,sa8775p"; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs9075-ride.dts b/arch/arm64/boot/dts/qcom/qcs9075-ride.dts new file mode 100644 index 000000000000..9ffab74fb1a8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs9075-ride.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. + */ +/dts-v1/; + +#include "sa8775p-ride.dts" + +/ { + model = "Qualcomm Technologies, Inc. QCS9075 Ride"; + compatible = "qcom,qcs9075-ride", "qcom,qcs9075", "qcom,sa8775p"; +};
Add device tree support for QCS9075 Ride & Ride-r3 boards. QCS9075 Ride & Ride-r3 are similar to QCS9100 Ride and Ride-r3 boards but without safety monitoring feature of SAfety-IsLand subsystem. Difference between ride and ride-r3 is the ethernet phy. Ride uses 1G ethernet phy while ride-r3 uses 2.5G ethernet phy. Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com> --- arch/arm64/boot/dts/qcom/Makefile | 2 ++ arch/arm64/boot/dts/qcom/qcs9075-ride-r3.dts | 12 ++++++++++++ arch/arm64/boot/dts/qcom/qcs9075-ride.dts | 12 ++++++++++++ 3 files changed, 26 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/qcs9075-ride-r3.dts create mode 100644 arch/arm64/boot/dts/qcom/qcs9075-ride.dts -- 2.47.0