| Message ID | 20241119092501.31111-1-quic_pbrahma@quicinc.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | arm64: dts: qcom: qcs9100: Update memory map for QCS9100 Ride and QCS9100 Ride Rev3 | expand |
On Tue, 19 Nov 2024 14:55:01 +0530, Pratyush Brahma wrote: > This patch series is based on Tengfei Fan's patches [1] which adds support > for QCS9100 Ride and QCS9100 Ride Rev3 boards. > > Some new carveouts (viz. gunyah_md and a few pil dtb carveouts) have been > introduced and the size and base addresses have been updated for > a few of existing carveouts compared to SA8775P. Also, tz_ffi_mem carveout > and its corresponding scm reference has been removed as it is not required > for these boards. Incorporate these changes in the updated memory map > for QCS9100 Ride and QCS9100 Rev3 boards. > > [1] https://lore.kernel.org/all/20240911-add_qcs9100_support-v2-4-e43a71ceb017@quicinc.com/ > > Signed-off-by: Pratyush Brahma <quic_pbrahma@quicinc.com> > --- > arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dts | 100 +++++++++++++++++++ > arch/arm64/boot/dts/qcom/qcs9100-ride.dts | 99 ++++++++++++++++++ > 2 files changed, 199 insertions(+) > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y qcom/qcs9100-ride-r3.dtb qcom/qcs9100-ride.dtb' for 20241119092501.31111-1-quic_pbrahma@quicinc.com: arch/arm64/boot/dts/qcom/qcs9100-ride.dtb: qcom,gpi-dma@800000: $nodename:0: 'qcom,gpi-dma@800000' does not match '^dma-controller(@.*)?$' from schema $id: http://devicetree.org/schemas/dma/qcom,gpi.yaml# arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dtb: qcom,gpi-dma@800000: $nodename:0: 'qcom,gpi-dma@800000' does not match '^dma-controller(@.*)?$' from schema $id: http://devicetree.org/schemas/dma/qcom,gpi.yaml# arch/arm64/boot/dts/qcom/qcs9100-ride.dtb: bluetooth: 'vddwlcx-supply' is a required property from schema $id: http://devicetree.org/schemas/net/bluetooth/qualcomm-bluetooth.yaml# arch/arm64/boot/dts/qcom/qcs9100-ride.dtb: bluetooth: 'vddwlmx-supply' is a required property from schema $id: http://devicetree.org/schemas/net/bluetooth/qualcomm-bluetooth.yaml# arch/arm64/boot/dts/qcom/qcs9100-ride.dtb: bluetooth: 'vddrfa1p8-supply' is a required property from schema $id: http://devicetree.org/schemas/net/bluetooth/qualcomm-bluetooth.yaml# arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dtb: bluetooth: 'vddwlcx-supply' is a required property from schema $id: http://devicetree.org/schemas/net/bluetooth/qualcomm-bluetooth.yaml# arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dtb: bluetooth: 'vddwlmx-supply' is a required property from schema $id: http://devicetree.org/schemas/net/bluetooth/qualcomm-bluetooth.yaml# arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dtb: bluetooth: 'vddrfa1p8-supply' is a required property from schema $id: http://devicetree.org/schemas/net/bluetooth/qualcomm-bluetooth.yaml# arch/arm64/boot/dts/qcom/qcs9100-ride.dtb: qcom,gpi-dma@900000: $nodename:0: 'qcom,gpi-dma@900000' does not match '^dma-controller(@.*)?$' from schema $id: http://devicetree.org/schemas/dma/qcom,gpi.yaml# arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dtb: qcom,gpi-dma@900000: $nodename:0: 'qcom,gpi-dma@900000' does not match '^dma-controller(@.*)?$' from schema $id: http://devicetree.org/schemas/dma/qcom,gpi.yaml# arch/arm64/boot/dts/qcom/qcs9100-ride.dtb: qcom,gpi-dma@a00000: $nodename:0: 'qcom,gpi-dma@a00000' does not match '^dma-controller(@.*)?$' from schema $id: http://devicetree.org/schemas/dma/qcom,gpi.yaml# arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dtb: qcom,gpi-dma@a00000: $nodename:0: 'qcom,gpi-dma@a00000' does not match '^dma-controller(@.*)?$' from schema $id: http://devicetree.org/schemas/dma/qcom,gpi.yaml# arch/arm64/boot/dts/qcom/qcs9100-ride.dtb: qcom,gpi-dma@b00000: $nodename:0: 'qcom,gpi-dma@b00000' does not match '^dma-controller(@.*)?$' from schema $id: http://devicetree.org/schemas/dma/qcom,gpi.yaml# arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dtb: qcom,gpi-dma@b00000: $nodename:0: 'qcom,gpi-dma@b00000' does not match '^dma-controller(@.*)?$' from schema $id: http://devicetree.org/schemas/dma/qcom,gpi.yaml# arch/arm64/boot/dts/qcom/qcs9100-ride.dtb: crypto@1dfa000: compatible: 'oneOf' conditional failed, one must be fixed: ['qcom,sa8775p-qce', 'qcom,qce'] is too long ['qcom,sa8775p-qce', 'qcom,qce'] is too short 'qcom,crypto-v5.1' was expected 'qcom,crypto-v5.4' was expected 'qcom,sa8775p-qce' is not one of ['qcom,ipq4019-qce', 'qcom,sm8150-qce'] 'qcom,sa8775p-qce' is not one of ['qcom,ipq6018-qce', 'qcom,ipq8074-qce', 'qcom,ipq9574-qce', 'qcom,msm8996-qce', 'qcom,qcm2290-qce', 'qcom,sdm845-qce', 'qcom,sm6115-qce'] 'qcom,ipq4019-qce' was expected 'qcom,sm8150-qce' was expected from schema $id: http://devicetree.org/schemas/crypto/qcom-qce.yaml# arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dtb: crypto@1dfa000: compatible: 'oneOf' conditional failed, one must be fixed: ['qcom,sa8775p-qce', 'qcom,qce'] is too long ['qcom,sa8775p-qce', 'qcom,qce'] is too short 'qcom,crypto-v5.1' was expected 'qcom,crypto-v5.4' was expected 'qcom,sa8775p-qce' is not one of ['qcom,ipq4019-qce', 'qcom,sm8150-qce'] 'qcom,sa8775p-qce' is not one of ['qcom,ipq6018-qce', 'qcom,ipq8074-qce', 'qcom,ipq9574-qce', 'qcom,msm8996-qce', 'qcom,qcm2290-qce', 'qcom,sdm845-qce', 'qcom,sm6115-qce'] 'qcom,ipq4019-qce' was expected 'qcom,sm8150-qce' was expected from schema $id: http://devicetree.org/schemas/crypto/qcom-qce.yaml# arch/arm64/boot/dts/qcom/qcs9100-ride.dtb: rsc@18200000: 'power-domains' is a required property from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,rpmh-rsc.yaml# arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dtb: rsc@18200000: 'power-domains' is a required property from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,rpmh-rsc.yaml# arch/arm64/boot/dts/qcom/qcs9100-ride.dtb: ethernet@23000000: tx-queues-config: 'snps,tx-sched-sp' does not match any of the regexes: '^queue[0-9]$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/net/qcom,ethqos.yaml# arch/arm64/boot/dts/qcom/qcs9100-ride.dtb: ethernet@23000000: Unevaluated properties are not allowed ('interconnect-names', 'interconnects', 'phy-handle', 'phy-mode', 'power-domains', 'rx-fifo-depth', 'rx-queues-config', 'snps,mtl-rx-config', 'snps,mtl-tx-config', 'snps,pbl', 'snps,ps-speed', 'snps,tso', 'tx-fifo-depth', 'tx-queues-config' were unexpected) from schema $id: http://devicetree.org/schemas/net/qcom,ethqos.yaml# arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dtb: ethernet@23000000: tx-queues-config: 'snps,tx-sched-sp' does not match any of the regexes: '^queue[0-9]$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/net/qcom,ethqos.yaml# arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dtb: ethernet@23000000: Unevaluated properties are not allowed ('interconnect-names', 'interconnects', 'phy-handle', 'phy-mode', 'power-domains', 'rx-fifo-depth', 'rx-queues-config', 'snps,mtl-rx-config', 'snps,mtl-tx-config', 'snps,pbl', 'snps,ps-speed', 'snps,tso', 'tx-fifo-depth', 'tx-queues-config' were unexpected) from schema $id: http://devicetree.org/schemas/net/qcom,ethqos.yaml# arch/arm64/boot/dts/qcom/qcs9100-ride.dtb: ethernet@23040000: tx-queues-config: 'snps,tx-sched-sp' does not match any of the regexes: '^queue[0-9]$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/net/qcom,ethqos.yaml# arch/arm64/boot/dts/qcom/qcs9100-ride.dtb: ethernet@23040000: Unevaluated properties are not allowed ('interconnect-names', 'interconnects', 'mdio', 'phy-handle', 'phy-mode', 'power-domains', 'rx-fifo-depth', 'rx-queues-config', 'snps,mtl-rx-config', 'snps,mtl-tx-config', 'snps,pbl', 'snps,ps-speed', 'snps,tso', 'tx-fifo-depth', 'tx-queues-config' were unexpected) from schema $id: http://devicetree.org/schemas/net/qcom,ethqos.yaml# arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dtb: ethernet@23040000: tx-queues-config: 'snps,tx-sched-sp' does not match any of the regexes: '^queue[0-9]$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/net/qcom,ethqos.yaml# arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dtb: ethernet@23040000: Unevaluated properties are not allowed ('interconnect-names', 'interconnects', 'mdio', 'phy-handle', 'phy-mode', 'power-domains', 'rx-fifo-depth', 'rx-queues-config', 'snps,mtl-rx-config', 'snps,mtl-tx-config', 'snps,pbl', 'snps,ps-speed', 'snps,tso', 'tx-fifo-depth', 'tx-queues-config' were unexpected) from schema $id: http://devicetree.org/schemas/net/qcom,ethqos.yaml# arch/arm64/boot/dts/qcom/qcs9100-ride.dtb: wcn6855-pmu: 'vddpmumx-supply' is a required property from schema $id: http://devicetree.org/schemas/regulator/qcom,qca6390-pmu.yaml# arch/arm64/boot/dts/qcom/qcs9100-ride.dtb: wcn6855-pmu: 'vddpmucx-supply' is a required property from schema $id: http://devicetree.org/schemas/regulator/qcom,qca6390-pmu.yaml# arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dtb: wcn6855-pmu: 'vddpmumx-supply' is a required property from schema $id: http://devicetree.org/schemas/regulator/qcom,qca6390-pmu.yaml# arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dtb: wcn6855-pmu: 'vddpmucx-supply' is a required property from schema $id: http://devicetree.org/schemas/regulator/qcom,qca6390-pmu.yaml#
On 11/19/2024 2:55 PM, Pratyush Brahma wrote: > This patch series is based on Tengfei Fan's patches [1] which adds support > for QCS9100 Ride and QCS9100 Ride Rev3 boards. > > Some new carveouts (viz. gunyah_md and a few pil dtb carveouts) have been > introduced and the size and base addresses have been updated for > a few of existing carveouts compared to SA8775P. Also, tz_ffi_mem carveout > and its corresponding scm reference has been removed as it is not required > for these boards. Incorporate these changes in the updated memory map > for QCS9100 Ride and QCS9100 Rev3 boards. > > [1] https://lore.kernel.org/all/20240911-add_qcs9100_support-v2-4-e43a71ceb017@quicinc.com/ > > Signed-off-by: Pratyush Brahma <quic_pbrahma@quicinc.com> The memory map for qcs9100-ride-r3 and qcs9100-ride is exactly same. A good churn you are first deleting(based on sa8775p) and then re-adding for qcs9100-ride*. I think it's better to move common qcs9100-ride* to a common file ex: qcs9100-ride.dtsi and keep specifics further to .dts files? This will ensure common entities are present at same place with no duplicates. -- Regards Kuldeep
On 11/20/2024 1:41 AM, Kuldeep Singh wrote: > > On 11/19/2024 2:55 PM, Pratyush Brahma wrote: >> This patch series is based on Tengfei Fan's patches [1] which adds support >> for QCS9100 Ride and QCS9100 Ride Rev3 boards. >> >> Some new carveouts (viz. gunyah_md and a few pil dtb carveouts) have been >> introduced and the size and base addresses have been updated for >> a few of existing carveouts compared to SA8775P. Also, tz_ffi_mem carveout >> and its corresponding scm reference has been removed as it is not required >> for these boards. Incorporate these changes in the updated memory map >> for QCS9100 Ride and QCS9100 Rev3 boards. >> >> [1] https://lore.kernel.org/all/20240911-add_qcs9100_support-v2-4-e43a71ceb017@quicinc.com/ >> >> Signed-off-by: Pratyush Brahma <quic_pbrahma@quicinc.com> > The memory map for qcs9100-ride-r3 and qcs9100-ride is exactly same. > A good churn you are first deleting(based on sa8775p) and then re-adding > for qcs9100-ride*. > > I think it's better to move common qcs9100-ride* to a common file ex: > qcs9100-ride.dtsi and keep specifics further to .dts files? > > This will ensure common entities are present at same place with no > duplicates. > > -- > > Regards > Kuldeep It is true that the memory map for qcs9100-ride.dts and qcs9100-ride-r3.dts is exactly the same. However, I am not sure if having a new common dtsi file would be the right approach here since qcs9100* dts files inherit the sa8775p.dtsi file already. I'll wait for Bjorn's comment here.
On Wed, Nov 20, 2024 at 01:41:03AM +0530, Kuldeep Singh wrote: > > > On 11/19/2024 2:55 PM, Pratyush Brahma wrote: > > This patch series is based on Tengfei Fan's patches [1] which adds support > > for QCS9100 Ride and QCS9100 Ride Rev3 boards. > > > > Some new carveouts (viz. gunyah_md and a few pil dtb carveouts) have been > > introduced and the size and base addresses have been updated for > > a few of existing carveouts compared to SA8775P. Also, tz_ffi_mem carveout > > and its corresponding scm reference has been removed as it is not required > > for these boards. Incorporate these changes in the updated memory map > > for QCS9100 Ride and QCS9100 Rev3 boards. > > > > [1] https://lore.kernel.org/all/20240911-add_qcs9100_support-v2-4-e43a71ceb017@quicinc.com/ > > > > Signed-off-by: Pratyush Brahma <quic_pbrahma@quicinc.com> > > The memory map for qcs9100-ride-r3 and qcs9100-ride is exactly same. > A good churn you are first deleting(based on sa8775p) and then re-adding > for qcs9100-ride*. > > I think it's better to move common qcs9100-ride* to a common file ex: > qcs9100-ride.dtsi and keep specifics further to .dts files? > > This will ensure common entities are present at same place with no > duplicates. I'd second this proposal.
On 11/20/2024 5:24 PM, Dmitry Baryshkov wrote: > On Wed, Nov 20, 2024 at 01:41:03AM +0530, Kuldeep Singh wrote: >> >> On 11/19/2024 2:55 PM, Pratyush Brahma wrote: >>> This patch series is based on Tengfei Fan's patches [1] which adds support >>> for QCS9100 Ride and QCS9100 Ride Rev3 boards. >>> >>> Some new carveouts (viz. gunyah_md and a few pil dtb carveouts) have been >>> introduced and the size and base addresses have been updated for >>> a few of existing carveouts compared to SA8775P. Also, tz_ffi_mem carveout >>> and its corresponding scm reference has been removed as it is not required >>> for these boards. Incorporate these changes in the updated memory map >>> for QCS9100 Ride and QCS9100 Rev3 boards. >>> >>> [1] https://lore.kernel.org/all/20240911-add_qcs9100_support-v2-4-e43a71ceb017@quicinc.com/ >>> >>> Signed-off-by: Pratyush Brahma <quic_pbrahma@quicinc.com> >> The memory map for qcs9100-ride-r3 and qcs9100-ride is exactly same. >> A good churn you are first deleting(based on sa8775p) and then re-adding >> for qcs9100-ride*. >> >> I think it's better to move common qcs9100-ride* to a common file ex: >> qcs9100-ride.dtsi and keep specifics further to .dts files? >> >> This will ensure common entities are present at same place with no >> duplicates. > I'd second this proposal. Ok then, I see that there are some thermal and gpu enablement changes as well in the pipeline to be posted. Having a common dtsi file for these iot socs would help in reducing the duplication at board dts file level for all these changes. In that regard, does naming it "sa8775-iot.dtsi" sound good? The board files can include this dtsi.
diff --git a/arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dts b/arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dts index 759d1ec694b2..0fa1afc0de17 100644 --- a/arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dts +++ b/arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dts @@ -5,7 +5,107 @@ /dts-v1/; #include "sa8775p-ride-r3.dts" + +/delete-node/ &pil_adsp_mem; +/delete-node/ &pil_gdsp0_mem; +/delete-node/ &pil_gdsp1_mem; +/delete-node/ &pil_cdsp0_mem; +/delete-node/ &pil_gpu_mem; +/delete-node/ &pil_cdsp1_mem; +/delete-node/ &pil_cvp_mem; +/delete-node/ &pil_video_mem; +/delete-node/ &audio_mdf_mem; +/delete-node/ &trusted_apps_mem; +/delete-node/ &tz_ffi_mem; + / { model = "Qualcomm QCS9100 Ride Rev3"; compatible = "qcom,qcs9100-ride-r3", "qcom,qcs9100", "qcom,sa8775p"; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gunyah_md_mem: gunyah-md@91a80000 { + reg = <0x0 0x91a80000 0x0 0x80000>; + no-map; + }; + + pil_adsp_mem: pil-adsp@95900000 { + reg = <0x0 0x95900000 0x0 0x1e00000>; + no-map; + }; + + q6_adsp_dtb_mem: q6-adsp-dtb@97700000 { + reg = <0x0 0x97700000 0x0 0x80000>; + no-map; + }; + + q6_gdsp0_dtb_mem: q6-gdsp0-dtb@97780000 { + reg = <0x0 0x97780000 0x0 0x80000>; + no-map; + }; + + pil_gdsp0_mem: pil-gdsp0@97800000 { + reg = <0x0 0x97800000 0x0 0x1e00000>; + no-map; + }; + + pil_gdsp1_mem: pil-gdsp1@99600000 { + reg = <0x0 0x99600000 0x0 0x1e00000>; + no-map; + }; + + q6_gdsp1_dtb_mem: q6-gdsp1-dtb@9b400000 { + reg = <0x0 0x9b400000 0x0 0x80000>; + no-map; + }; + + q6_cdsp0_dtb_mem: q6-cdsp0-dtb@9b480000 { + reg = <0x0 0x9b480000 0x0 0x80000>; + no-map; + }; + + pil_cdsp0_mem: pil-cdsp0@9b500000 { + reg = <0x0 0x9b500000 0x0 0x1e00000>; + no-map; + }; + + pil_gpu_mem: pil-gpu@9d300000 { + reg = <0x0 0x9d300000 0x0 0x2000>; + no-map; + }; + + q6_cdsp1_dtb_mem: q6-cdsp1-dtb@9d380000 { + reg = <0x0 0x9d380000 0x0 0x80000>; + no-map; + }; + + pil_cdsp1_mem: pil-cdsp1@9d400000 { + reg = <0x0 0x9d400000 0x0 0x1e00000>; + no-map; + }; + + pil_cvp_mem: pil-cvp@9f200000 { + reg = <0x0 0x9f200000 0x0 0x700000>; + no-map; + }; + + pil_video_mem: pil-video@9f900000 { + reg = <0x0 0x9f900000 0x0 0x1000000>; + no-map; + }; + + trusted_apps_mem: trusted-apps@d1900000 { + reg = <0x0 0xd1900000 0x0 0x1c00000>; + no-map; + }; + }; + + firmware { + scm { + /delete-property/ memory-region; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/qcs9100-ride.dts b/arch/arm64/boot/dts/qcom/qcs9100-ride.dts index 979462dfec30..f79954ae0d38 100644 --- a/arch/arm64/boot/dts/qcom/qcs9100-ride.dts +++ b/arch/arm64/boot/dts/qcom/qcs9100-ride.dts @@ -5,7 +5,106 @@ /dts-v1/; #include "sa8775p-ride.dts" + +/delete-node/ &pil_adsp_mem; +/delete-node/ &pil_gdsp0_mem; +/delete-node/ &pil_gdsp1_mem; +/delete-node/ &pil_cdsp0_mem; +/delete-node/ &pil_gpu_mem; +/delete-node/ &pil_cdsp1_mem; +/delete-node/ &pil_cvp_mem; +/delete-node/ &pil_video_mem; +/delete-node/ &audio_mdf_mem; +/delete-node/ &trusted_apps_mem; +/delete-node/ &tz_ffi_mem; + / { model = "Qualcomm QCS9100 Ride"; compatible = "qcom,qcs9100-ride", "qcom,qcs9100", "qcom,sa8775p"; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + gunyah_md_mem: gunyah-md@91a80000 { + reg = <0x0 0x91a80000 0x0 0x80000>; + no-map; + }; + + pil_adsp_mem: pil-adsp@95900000 { + reg = <0x0 0x95900000 0x0 0x1e00000>; + no-map; + }; + + q6_adsp_dtb_mem: q6-adsp-dtb@97700000 { + reg = <0x0 0x97700000 0x0 0x80000>; + no-map; + }; + + q6_gdsp0_dtb_mem: q6-gdsp0-dtb@97780000 { + reg = <0x0 0x97780000 0x0 0x80000>; + no-map; + }; + + pil_gdsp0_mem: pil-gdsp0@97800000 { + reg = <0x0 0x97800000 0x0 0x1e00000>; + no-map; + }; + + pil_gdsp1_mem: pil-gdsp1@99600000 { + reg = <0x0 0x99600000 0x0 0x1e00000>; + no-map; + }; + + q6_gdsp1_dtb_mem: q6-gdsp1-dtb@9b400000 { + reg = <0x0 0x9b400000 0x0 0x80000>; + no-map; + }; + + q6_cdsp0_dtb_mem: q6-cdsp0-dtb@9b480000 { + reg = <0x0 0x9b480000 0x0 0x80000>; + no-map; + }; + + pil_cdsp0_mem: pil-cdsp0@9b500000 { + reg = <0x0 0x9b500000 0x0 0x1e00000>; + no-map; + }; + + pil_gpu_mem: pil-gpu@9d300000 { + reg = <0x0 0x9d300000 0x0 0x2000>; + no-map; + }; + + q6_cdsp1_dtb_mem: q6-cdsp1-dtb@9d380000 { + reg = <0x0 0x9d380000 0x0 0x80000>; + no-map; + }; + + pil_cdsp1_mem: pil-cdsp1@9d400000 { + reg = <0x0 0x9d400000 0x0 0x1e00000>; + no-map; + }; + + pil_cvp_mem: pil-cvp@9f200000 { + reg = <0x0 0x9f200000 0x0 0x700000>; + no-map; + }; + + pil_video_mem: pil-video@9f900000 { + reg = <0x0 0x9f900000 0x0 0x1000000>; + no-map; + }; + + trusted_apps_mem: trusted-apps@d1900000 { + reg = <0x0 0xd1900000 0x0 0x1c00000>; + no-map; + }; + }; + + firmware { + scm { + /delete-property/ memory-region; + }; + }; };
This patch series is based on Tengfei Fan's patches [1] which adds support for QCS9100 Ride and QCS9100 Ride Rev3 boards. Some new carveouts (viz. gunyah_md and a few pil dtb carveouts) have been introduced and the size and base addresses have been updated for a few of existing carveouts compared to SA8775P. Also, tz_ffi_mem carveout and its corresponding scm reference has been removed as it is not required for these boards. Incorporate these changes in the updated memory map for QCS9100 Ride and QCS9100 Rev3 boards. [1] https://lore.kernel.org/all/20240911-add_qcs9100_support-v2-4-e43a71ceb017@quicinc.com/ Signed-off-by: Pratyush Brahma <quic_pbrahma@quicinc.com> --- arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dts | 100 +++++++++++++++++++ arch/arm64/boot/dts/qcom/qcs9100-ride.dts | 99 ++++++++++++++++++ 2 files changed, 199 insertions(+)