| Message ID | 20241023-drm-vc4-2712-support-v1-0-1cc2d5594907@raspberrypi.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | drm/vc4: Add support for BCM2712 / Pi5 display hardware | expand |
On Wed, 23 Oct 2024 at 17:50, Dave Stevenson <dave.stevenson@raspberrypi.com> wrote: > > This series adds the required DRM, clock, and DT changes > required to support the display hardware on Pi5. > There are a couple of minor fixes first before the main patches. > > Many of the patches were authored by Maxime whilst working > for us, however there have been a number of fixes squashed > into his original patches as issues have been found. I also > reworked the way UBM allocations are done to avoid double > buffering of the handles as they are quite a limited resource. > > There are 2 variants of the IP. Most Pi5's released to date > have used the C1 step of the SoC, whilst the 2GB Pi5 released > in August is using the D0 step, as will other boards in future. > > Due to various reasons the register map got reworked between > the steps, so there is extra code to handle the differences. > Which step is in use is read out of the hardware, so they > share a compatible string. A gentle ping on the patches for clk-raspberrypi (patches 29-33) and Broadcom DT (patches 34-36). All the DRM and dtbinding ones are reviewed or acked (thank you!). Thanks Dave > Thanks! > > Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> > --- > Dave Stevenson (12): > drm/vc4: Limit max_bpc to 8 on Pi0-3 > drm/vc4: Use of_device_get_match_data to set generation > drm/vc4: Fix reading of frame count on GEN5 / Pi4 > drm/vc4: drv: Add support for 2712 D-step > drm/vc4: hvs: Add in support for 2712 D-step. > drm/vc4: plane: Add support for 2712 D-step. > drm/vc4: hdmi: Support 2712 D-step register map > drm/vc4: Enable bg_fill if there are no planes enabled > drm/vc4: Drop planes that are completely off-screen or 0 crtc size > arm64: dts: broadcom: Add firmware clocks and power nodes to Pi5 DT > arm64: dts: broadcom: Add display pipeline support to BCM2712 > arm64: dts: broadcom: Add DT for D-step version of BCM2712 > > Dom Cobley (3): > clk: bcm: rpi: Add ISP to exported clocks > clk: bcm: rpi: Allow cpufreq driver to also adjust gpu clocks > clk: bcm: rpi: Enable minimize for all firmware clocks > > Maxime Ripard (22): > dt-bindings: display: Add BCM2712 HDMI bindings > dt-bindings: display: Add BCM2712 HVS bindings > dt-bindings: display: Add BCM2712 PixelValve bindings > dt-bindings: display: Add BCM2712 MOP bindings > dt-bindings: display: Add BCM2712 MOPLET bindings > dt-bindings: display: Add BCM2712 KMS driver bindings > drm/vc4: drv: Support BCM2712 > drm/vc4: hvs: Add support for BCM2712 HVS > drm/vc4: crtc: Add support for BCM2712 PixelValves > drm/vc4: hdmi: Add support for BCM2712 HDMI controllers > drm/vc4: txp: Introduce structure to deal with revision differences > drm/vc4: txp: Rename TXP data structure > drm/vc4: txp: Add byte enable toggle bit > drm/vc4: txp: Add horizontal and vertical size offset toggle bit > drm/vc4: txp: Handle 40-bits DMA Addresses > drm/vc4: txp: Move the encoder type in the variant structure > drm/vc4: txp: Add a new TXP encoder type > drm/vc4: txp: Add support for BCM2712 MOP > drm/vc4: txp: Add BCM2712 MOPLET support > drm/vc4: Add additional warn_on for incorrect revisions > clk: bcm: rpi: Create helper to retrieve private data > clk: bcm: rpi: Add disp clock > > .../bindings/display/brcm,bcm2711-hdmi.yaml | 2 + > .../bindings/display/brcm,bcm2835-hvs.yaml | 5 +- > .../bindings/display/brcm,bcm2835-pixelvalve0.yaml | 3 + > .../bindings/display/brcm,bcm2835-txp.yaml | 5 +- > .../bindings/display/brcm,bcm2835-vc4.yaml | 1 + > arch/arm64/boot/dts/broadcom/Makefile | 1 + > arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dts | 37 + > arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts | 42 + > arch/arm64/boot/dts/broadcom/bcm2712.dtsi | 188 +++++ > drivers/clk/bcm/clk-raspberrypi.c | 34 +- > drivers/gpu/drm/vc4/tests/vc4_mock.c | 8 +- > drivers/gpu/drm/vc4/tests/vc4_test_pv_muxing.c | 106 +-- > drivers/gpu/drm/vc4/vc4_crtc.c | 96 ++- > drivers/gpu/drm/vc4/vc4_drv.c | 19 +- > drivers/gpu/drm/vc4/vc4_drv.h | 54 +- > drivers/gpu/drm/vc4/vc4_hdmi.c | 112 ++- > drivers/gpu/drm/vc4/vc4_hdmi.h | 4 + > drivers/gpu/drm/vc4/vc4_hdmi_phy.c | 640 +++++++++++++++ > drivers/gpu/drm/vc4/vc4_hdmi_regs.h | 217 ++++++ > drivers/gpu/drm/vc4/vc4_hvs.c | 737 ++++++++++++++++-- > drivers/gpu/drm/vc4/vc4_kms.c | 102 ++- > drivers/gpu/drm/vc4/vc4_plane.c | 866 ++++++++++++++++++++- > drivers/gpu/drm/vc4/vc4_regs.h | 297 +++++++ > drivers/gpu/drm/vc4/vc4_txp.c | 91 ++- > include/soc/bcm2835/raspberrypi-firmware.h | 1 + > 25 files changed, 3464 insertions(+), 204 deletions(-) > --- > base-commit: 91e21479c81dd4e9e22a78d7446f92f6b96a7284 > change-id: 20241002-drm-vc4-2712-support-9ad3236e3caf > > Best regards, > -- > Dave Stevenson <dave.stevenson@raspberrypi.com> >
On Thu, Nov 21, 2024 at 03:37:00PM +0000, Dave Stevenson wrote: > On Wed, 23 Oct 2024 at 17:50, Dave Stevenson > <dave.stevenson@raspberrypi.com> wrote: > > > > This series adds the required DRM, clock, and DT changes > > required to support the display hardware on Pi5. > > There are a couple of minor fixes first before the main patches. > > > > Many of the patches were authored by Maxime whilst working > > for us, however there have been a number of fixes squashed > > into his original patches as issues have been found. I also > > reworked the way UBM allocations are done to avoid double > > buffering of the handles as they are quite a limited resource. > > > > There are 2 variants of the IP. Most Pi5's released to date > > have used the C1 step of the SoC, whilst the 2GB Pi5 released > > in August is using the D0 step, as will other boards in future. > > > > Due to various reasons the register map got reworked between > > the steps, so there is extra code to handle the differences. > > Which step is in use is read out of the hardware, so they > > share a compatible string. > > A gentle ping on the patches for clk-raspberrypi (patches 29-33) and > Broadcom DT (patches 34-36). > > All the DRM and dtbinding ones are reviewed or acked (thank you!). If the bindings and DRM patches are all merged, you can merge these at least. Maxime
On 11/22/2024 12:06 AM, Maxime Ripard wrote: > On Thu, Nov 21, 2024 at 03:37:00PM +0000, Dave Stevenson wrote: >> On Wed, 23 Oct 2024 at 17:50, Dave Stevenson >> <dave.stevenson@raspberrypi.com> wrote: >>> >>> This series adds the required DRM, clock, and DT changes >>> required to support the display hardware on Pi5. >>> There are a couple of minor fixes first before the main patches. >>> >>> Many of the patches were authored by Maxime whilst working >>> for us, however there have been a number of fixes squashed >>> into his original patches as issues have been found. I also >>> reworked the way UBM allocations are done to avoid double >>> buffering of the handles as they are quite a limited resource. >>> >>> There are 2 variants of the IP. Most Pi5's released to date >>> have used the C1 step of the SoC, whilst the 2GB Pi5 released >>> in August is using the D0 step, as will other boards in future. >>> >>> Due to various reasons the register map got reworked between >>> the steps, so there is extra code to handle the differences. >>> Which step is in use is read out of the hardware, so they >>> share a compatible string. >> >> A gentle ping on the patches for clk-raspberrypi (patches 29-33) and >> Broadcom DT (patches 34-36). >> >> All the DRM and dtbinding ones are reviewed or acked (thank you!). > > If the bindings and DRM patches are all merged, you can merge these at > least. I will be taking in the DTS patche shortly. Thanks!
This series adds the required DRM, clock, and DT changes required to support the display hardware on Pi5. There are a couple of minor fixes first before the main patches. Many of the patches were authored by Maxime whilst working for us, however there have been a number of fixes squashed into his original patches as issues have been found. I also reworked the way UBM allocations are done to avoid double buffering of the handles as they are quite a limited resource. There are 2 variants of the IP. Most Pi5's released to date have used the C1 step of the SoC, whilst the 2GB Pi5 released in August is using the D0 step, as will other boards in future. Due to various reasons the register map got reworked between the steps, so there is extra code to handle the differences. Which step is in use is read out of the hardware, so they share a compatible string. Thanks! Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> --- Dave Stevenson (12): drm/vc4: Limit max_bpc to 8 on Pi0-3 drm/vc4: Use of_device_get_match_data to set generation drm/vc4: Fix reading of frame count on GEN5 / Pi4 drm/vc4: drv: Add support for 2712 D-step drm/vc4: hvs: Add in support for 2712 D-step. drm/vc4: plane: Add support for 2712 D-step. drm/vc4: hdmi: Support 2712 D-step register map drm/vc4: Enable bg_fill if there are no planes enabled drm/vc4: Drop planes that are completely off-screen or 0 crtc size arm64: dts: broadcom: Add firmware clocks and power nodes to Pi5 DT arm64: dts: broadcom: Add display pipeline support to BCM2712 arm64: dts: broadcom: Add DT for D-step version of BCM2712 Dom Cobley (3): clk: bcm: rpi: Add ISP to exported clocks clk: bcm: rpi: Allow cpufreq driver to also adjust gpu clocks clk: bcm: rpi: Enable minimize for all firmware clocks Maxime Ripard (22): dt-bindings: display: Add BCM2712 HDMI bindings dt-bindings: display: Add BCM2712 HVS bindings dt-bindings: display: Add BCM2712 PixelValve bindings dt-bindings: display: Add BCM2712 MOP bindings dt-bindings: display: Add BCM2712 MOPLET bindings dt-bindings: display: Add BCM2712 KMS driver bindings drm/vc4: drv: Support BCM2712 drm/vc4: hvs: Add support for BCM2712 HVS drm/vc4: crtc: Add support for BCM2712 PixelValves drm/vc4: hdmi: Add support for BCM2712 HDMI controllers drm/vc4: txp: Introduce structure to deal with revision differences drm/vc4: txp: Rename TXP data structure drm/vc4: txp: Add byte enable toggle bit drm/vc4: txp: Add horizontal and vertical size offset toggle bit drm/vc4: txp: Handle 40-bits DMA Addresses drm/vc4: txp: Move the encoder type in the variant structure drm/vc4: txp: Add a new TXP encoder type drm/vc4: txp: Add support for BCM2712 MOP drm/vc4: txp: Add BCM2712 MOPLET support drm/vc4: Add additional warn_on for incorrect revisions clk: bcm: rpi: Create helper to retrieve private data clk: bcm: rpi: Add disp clock .../bindings/display/brcm,bcm2711-hdmi.yaml | 2 + .../bindings/display/brcm,bcm2835-hvs.yaml | 5 +- .../bindings/display/brcm,bcm2835-pixelvalve0.yaml | 3 + .../bindings/display/brcm,bcm2835-txp.yaml | 5 +- .../bindings/display/brcm,bcm2835-vc4.yaml | 1 + arch/arm64/boot/dts/broadcom/Makefile | 1 + arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dts | 37 + arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts | 42 + arch/arm64/boot/dts/broadcom/bcm2712.dtsi | 188 +++++ drivers/clk/bcm/clk-raspberrypi.c | 34 +- drivers/gpu/drm/vc4/tests/vc4_mock.c | 8 +- drivers/gpu/drm/vc4/tests/vc4_test_pv_muxing.c | 106 +-- drivers/gpu/drm/vc4/vc4_crtc.c | 96 ++- drivers/gpu/drm/vc4/vc4_drv.c | 19 +- drivers/gpu/drm/vc4/vc4_drv.h | 54 +- drivers/gpu/drm/vc4/vc4_hdmi.c | 112 ++- drivers/gpu/drm/vc4/vc4_hdmi.h | 4 + drivers/gpu/drm/vc4/vc4_hdmi_phy.c | 640 +++++++++++++++ drivers/gpu/drm/vc4/vc4_hdmi_regs.h | 217 ++++++ drivers/gpu/drm/vc4/vc4_hvs.c | 737 ++++++++++++++++-- drivers/gpu/drm/vc4/vc4_kms.c | 102 ++- drivers/gpu/drm/vc4/vc4_plane.c | 866 ++++++++++++++++++++- drivers/gpu/drm/vc4/vc4_regs.h | 297 +++++++ drivers/gpu/drm/vc4/vc4_txp.c | 91 ++- include/soc/bcm2835/raspberrypi-firmware.h | 1 + 25 files changed, 3464 insertions(+), 204 deletions(-) --- base-commit: 91e21479c81dd4e9e22a78d7446f92f6b96a7284 change-id: 20241002-drm-vc4-2712-support-9ad3236e3caf Best regards,