diff mbox series

[v2,3/4] arm64: dts: qcom: x1e80100-vivobook-s15: Add lid switch

Message ID 20241123-asus_qcom_display-v2-3-a0bff8576024@hotmail.com (mailing list archive)
State Superseded
Headers show
Series Asus vivobook s15 improvements | expand

Commit Message

Maud Spierings via B4 Relay Nov. 23, 2024, 12:58 p.m. UTC 
From: Maud Spierings <maud_spierings@hotmail.com>

Add the lid switch for the Asus vivobook s15

Signed-off-by: Maud Spierings <maud_spierings@hotmail.com>
---
 .../boot/dts/qcom/x1e80100-asus-vivobook-s15.dts    | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

Comments

Krzysztof Kozlowski Nov. 23, 2024, 4:33 p.m. UTC | #1 
On Sat, Nov 23, 2024 at 01:58:55PM +0100, Maud Spierings wrote:
> +
>  	pmic-glink {
>  		compatible = "qcom,x1e80100-pmic-glink",
>  			     "qcom,sm8550-pmic-glink",
> @@ -537,6 +552,12 @@ edp_reg_en: edp-reg-en-state {
>  		bias-disable;
>  	};
>  
> +	hall_int_n_default: hall-int-n-state {
> +			pins = "gpio92";
> +			function = "gpio";

Messed indentation.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
index dbc85aff50a95bfc2ac11528d1901979ec7b1501..d0bee4b6fc0be6fe40d335f4d50dde495853b315 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
@@ -7,6 +7,7 @@ 
 /dts-v1/;
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
 #include "x1e80100.dtsi"
@@ -17,6 +18,20 @@  / {
 	compatible = "asus,vivobook-s15", "qcom,x1e80100";
 	chassis-type = "laptop";
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&hall_int_n_default>;
+		pinctrl-names = "default";
+
+		switch-lid {
+			gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
 	pmic-glink {
 		compatible = "qcom,x1e80100-pmic-glink",
 			     "qcom,sm8550-pmic-glink",
@@ -537,6 +552,12 @@  edp_reg_en: edp-reg-en-state {
 		bias-disable;
 	};
 
+	hall_int_n_default: hall-int-n-state {
+			pins = "gpio92";
+			function = "gpio";
+		bias-disable;
+	};
+
 	kybd_default: kybd-default-state {
 		pins = "gpio67";
 		function = "gpio";