diff mbox series

[v2,07/15] dt-bindings: phy: renesas,usb2-phy: Mark resets as required for RZ/G3S

Message ID 20241126092050.1825607-8-claudiu.beznea.uj@bp.renesas.com (mailing list archive)
State New
Delegated to: Geert Uytterhoeven
Headers show
Series Add initial USB support for the Renesas RZ/G3S SoC | expand

Commit Message

Claudiu Nov. 26, 2024, 9:20 a.m. UTC 
From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

The reset lines are mandatory for the Renesas RZ/G3S platform and must be
explicitly defined in device tree.

Fixes: f3c849855114 ("dt-bindings: phy: renesas,usb2-phy: Document RZ/G3S phy bindings")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
---

Changes in v2:
- none; this patch is new


 Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

Comments

Conor Dooley Nov. 26, 2024, 5:53 p.m. UTC | #1 
On Tue, Nov 26, 2024 at 11:20:42AM +0200, Claudiu wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> 
> The reset lines are mandatory for the Renesas RZ/G3S platform and must be
> explicitly defined in device tree.
> 
> Fixes: f3c849855114 ("dt-bindings: phy: renesas,usb2-phy: Document RZ/G3S phy bindings")
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

Acked-by: Conor Dooley <conor.dooley@microchip.com>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
index af275cea3456..2babd200bd98 100644
--- a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
@@ -105,7 +105,9 @@  allOf:
       properties:
         compatible:
           contains:
-            const: renesas,rzg2l-usb2-phy
+            enum:
+              - renesas,rzg2l-usb2-phy
+              - renesas,usb2-phy-r9a08g045
     then:
       required:
         - resets