@@ -56,7 +56,8 @@ struct phylink {
struct phy_device *phydev;
phy_interface_t link_interface; /* PHY_INTERFACE_xxx */
u8 cfg_link_an_mode; /* MLO_AN_xxx */
- u8 cur_link_an_mode;
+ u8 req_link_an_mode; /* Requested MLO_AN_xxx mode */
+ u8 act_link_an_mode; /* Active MLO_AN_xxx mode */
u8 link_port; /* The current non-phy ethtool port */
__ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
@@ -1065,13 +1066,13 @@ static void phylink_mac_config(struct phylink *pl,
phylink_dbg(pl,
"%s: mode=%s/%s/%s adv=%*pb pause=%02x\n",
- __func__, phylink_an_mode_str(pl->cur_link_an_mode),
+ __func__, phylink_an_mode_str(pl->act_link_an_mode),
phy_modes(st.interface),
phy_rate_matching_to_str(st.rate_matching),
__ETHTOOL_LINK_MODE_MASK_NBITS, st.advertising,
st.pause);
- pl->mac_ops->mac_config(pl->config, pl->cur_link_an_mode, &st);
+ pl->mac_ops->mac_config(pl->config, pl->act_link_an_mode, &st);
}
static void phylink_pcs_an_restart(struct phylink *pl)
@@ -1079,7 +1080,7 @@ static void phylink_pcs_an_restart(struct phylink *pl)
if (pl->pcs && linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
pl->link_config.advertising) &&
phy_interface_mode_is_8023z(pl->link_config.interface) &&
- phylink_autoneg_inband(pl->cur_link_an_mode))
+ phylink_autoneg_inband(pl->act_link_an_mode))
pl->pcs->ops->pcs_an_restart(pl->pcs);
}
@@ -1109,7 +1110,7 @@ static void phylink_pcs_neg_mode(struct phylink *pl, struct phylink_pcs *pcs,
{
unsigned int neg_mode, mode;
- mode = pl->cur_link_an_mode;
+ mode = pl->req_link_an_mode;
switch (interface) {
case PHY_INTERFACE_MODE_SGMII:
@@ -1151,6 +1152,7 @@ static void phylink_pcs_neg_mode(struct phylink *pl, struct phylink_pcs *pcs,
}
pl->pcs_neg_mode = neg_mode;
+ pl->act_link_an_mode = mode;
}
static void phylink_major_config(struct phylink *pl, bool restart,
@@ -1181,7 +1183,7 @@ static void phylink_major_config(struct phylink *pl, bool restart,
phylink_pcs_poll_stop(pl);
if (pl->mac_ops->mac_prepare) {
- err = pl->mac_ops->mac_prepare(pl->config, pl->cur_link_an_mode,
+ err = pl->mac_ops->mac_prepare(pl->config, pl->act_link_an_mode,
state->interface);
if (err < 0) {
phylink_err(pl, "mac_prepare failed: %pe\n",
@@ -1215,7 +1217,7 @@ static void phylink_major_config(struct phylink *pl, bool restart,
if (pl->pcs_state == PCS_STATE_STARTING || pcs_changed)
phylink_pcs_enable(pl->pcs);
- neg_mode = pl->cur_link_an_mode;
+ neg_mode = pl->act_link_an_mode;
if (pl->pcs && pl->pcs->neg_mode)
neg_mode = pl->pcs_neg_mode;
@@ -1231,7 +1233,7 @@ static void phylink_major_config(struct phylink *pl, bool restart,
phylink_pcs_an_restart(pl);
if (pl->mac_ops->mac_finish) {
- err = pl->mac_ops->mac_finish(pl->config, pl->cur_link_an_mode,
+ err = pl->mac_ops->mac_finish(pl->config, pl->act_link_an_mode,
state->interface);
if (err < 0)
phylink_err(pl, "mac_finish failed: %pe\n",
@@ -1262,7 +1264,7 @@ static int phylink_change_inband_advert(struct phylink *pl)
return 0;
phylink_dbg(pl, "%s: mode=%s/%s adv=%*pb pause=%02x\n", __func__,
- phylink_an_mode_str(pl->cur_link_an_mode),
+ phylink_an_mode_str(pl->req_link_an_mode),
phy_modes(pl->link_config.interface),
__ETHTOOL_LINK_MODE_MASK_NBITS, pl->link_config.advertising,
pl->link_config.pause);
@@ -1271,7 +1273,7 @@ static int phylink_change_inband_advert(struct phylink *pl)
phylink_pcs_neg_mode(pl, pl->pcs, pl->link_config.interface,
pl->link_config.advertising);
- neg_mode = pl->cur_link_an_mode;
+ neg_mode = pl->act_link_an_mode;
if (pl->pcs->neg_mode)
neg_mode = pl->pcs_neg_mode;
@@ -1336,7 +1338,7 @@ static void phylink_mac_initial_config(struct phylink *pl, bool force_restart)
{
struct phylink_link_state link_state;
- switch (pl->cur_link_an_mode) {
+ switch (pl->req_link_an_mode) {
case MLO_AN_PHY:
link_state = pl->phy_state;
break;
@@ -1410,14 +1412,14 @@ static void phylink_link_up(struct phylink *pl,
pl->cur_interface = link_state.interface;
- neg_mode = pl->cur_link_an_mode;
+ neg_mode = pl->act_link_an_mode;
if (pl->pcs && pl->pcs->neg_mode)
neg_mode = pl->pcs_neg_mode;
phylink_pcs_link_up(pl->pcs, neg_mode, pl->cur_interface, speed,
duplex);
- pl->mac_ops->mac_link_up(pl->config, pl->phydev, pl->cur_link_an_mode,
+ pl->mac_ops->mac_link_up(pl->config, pl->phydev, pl->act_link_an_mode,
pl->cur_interface, speed, duplex,
!!(link_state.pause & MLO_PAUSE_TX), rx_pause);
@@ -1437,7 +1439,7 @@ static void phylink_link_down(struct phylink *pl)
if (ndev)
netif_carrier_off(ndev);
- pl->mac_ops->mac_link_down(pl->config, pl->cur_link_an_mode,
+ pl->mac_ops->mac_link_down(pl->config, pl->act_link_an_mode,
pl->cur_interface);
phylink_info(pl, "Link is Down\n");
}
@@ -1463,10 +1465,10 @@ static void phylink_resolve(struct work_struct *w)
} else if (pl->link_failed) {
link_state.link = false;
retrigger = true;
- } else if (pl->cur_link_an_mode == MLO_AN_FIXED) {
+ } else if (pl->act_link_an_mode == MLO_AN_FIXED) {
phylink_get_fixed_state(pl, &link_state);
mac_config = link_state.link;
- } else if (pl->cur_link_an_mode == MLO_AN_PHY) {
+ } else if (pl->act_link_an_mode == MLO_AN_PHY) {
link_state = pl->phy_state;
mac_config = link_state.link;
} else {
@@ -1520,7 +1522,7 @@ static void phylink_resolve(struct work_struct *w)
}
}
- if (pl->cur_link_an_mode != MLO_AN_FIXED)
+ if (pl->act_link_an_mode != MLO_AN_FIXED)
phylink_apply_manual_flow(pl, &link_state);
if (mac_config) {
@@ -1644,7 +1646,7 @@ int phylink_set_fixed_link(struct phylink *pl,
pl->link_config.an_complete = 1;
pl->cfg_link_an_mode = MLO_AN_FIXED;
- pl->cur_link_an_mode = pl->cfg_link_an_mode;
+ pl->req_link_an_mode = pl->cfg_link_an_mode;
return 0;
}
@@ -1732,7 +1734,7 @@ struct phylink *phylink_create(struct phylink_config *config,
}
}
- pl->cur_link_an_mode = pl->cfg_link_an_mode;
+ pl->req_link_an_mode = pl->cfg_link_an_mode;
ret = phylink_register_sfp(pl, fwnode);
if (ret < 0) {
@@ -2198,7 +2200,7 @@ void phylink_start(struct phylink *pl)
ASSERT_RTNL();
phylink_info(pl, "configuring for %s/%s link mode\n",
- phylink_an_mode_str(pl->cur_link_an_mode),
+ phylink_an_mode_str(pl->req_link_an_mode),
phy_modes(pl->link_config.interface));
/* Always set the carrier off */
@@ -2483,7 +2485,7 @@ int phylink_ethtool_ksettings_get(struct phylink *pl,
linkmode_copy(kset->link_modes.supported, pl->supported);
- switch (pl->cur_link_an_mode) {
+ switch (pl->act_link_an_mode) {
case MLO_AN_FIXED:
/* We are using fixed settings. Report these as the
* current link settings - and note that these also
@@ -2575,7 +2577,7 @@ int phylink_ethtool_ksettings_set(struct phylink *pl,
/* If we have a fixed link, refuse to change link parameters.
* If the link parameters match, accept them but do nothing.
*/
- if (pl->cur_link_an_mode == MLO_AN_FIXED) {
+ if (pl->req_link_an_mode == MLO_AN_FIXED) {
if (s->speed != pl->link_config.speed ||
s->duplex != pl->link_config.duplex)
return -EINVAL;
@@ -2591,7 +2593,7 @@ int phylink_ethtool_ksettings_set(struct phylink *pl,
* is our default case) but do not allow the advertisement to
* be changed. If the advertisement matches, simply return.
*/
- if (pl->cur_link_an_mode == MLO_AN_FIXED) {
+ if (pl->req_link_an_mode == MLO_AN_FIXED) {
if (!linkmode_equal(config.advertising,
pl->link_config.advertising))
return -EINVAL;
@@ -2626,7 +2628,7 @@ int phylink_ethtool_ksettings_set(struct phylink *pl,
linkmode_copy(support, pl->supported);
if (phylink_validate(pl, support, &config)) {
phylink_err(pl, "validation of %s/%s with support %*pb failed\n",
- phylink_an_mode_str(pl->cur_link_an_mode),
+ phylink_an_mode_str(pl->req_link_an_mode),
phy_modes(config.interface),
__ETHTOOL_LINK_MODE_MASK_NBITS, support);
return -EINVAL;
@@ -2726,7 +2728,7 @@ int phylink_ethtool_set_pauseparam(struct phylink *pl,
ASSERT_RTNL();
- if (pl->cur_link_an_mode == MLO_AN_FIXED)
+ if (pl->req_link_an_mode == MLO_AN_FIXED)
return -EOPNOTSUPP;
if (!phylink_test(pl->supported, Pause) &&
@@ -2990,7 +2992,7 @@ static int phylink_mii_read(struct phylink *pl, unsigned int phy_id,
struct phylink_link_state state;
int val = 0xffff;
- switch (pl->cur_link_an_mode) {
+ switch (pl->act_link_an_mode) {
case MLO_AN_FIXED:
if (phy_id == 0) {
phylink_get_fixed_state(pl, &state);
@@ -3015,7 +3017,7 @@ static int phylink_mii_read(struct phylink *pl, unsigned int phy_id,
static int phylink_mii_write(struct phylink *pl, unsigned int phy_id,
unsigned int reg, unsigned int val)
{
- switch (pl->cur_link_an_mode) {
+ switch (pl->act_link_an_mode) {
case MLO_AN_FIXED:
break;
@@ -3205,9 +3207,9 @@ static void phylink_sfp_set_config(struct phylink *pl, u8 mode,
changed = true;
}
- if (pl->cur_link_an_mode != mode ||
+ if (pl->req_link_an_mode != mode ||
pl->link_config.interface != state->interface) {
- pl->cur_link_an_mode = mode;
+ pl->req_link_an_mode = mode;
pl->link_config.interface = state->interface;
changed = true;
There is an interdependence between the current link_an_mode and pcs_neg_mode that some drivers rely upon to know whether inband or PHY mode will be used. In order to support detection of PCS and PHY inband capabilities resulting in automatic selection of inband or PHY mode, we need to cater for this, and support changing the MAC link_an_mode. However, we end up with an inter-dependency between the current link_an_mode and pcs_neg_mode. To solve this, split the current link_an_mode into the requested link_an_mode and active link_an_mode. The requested link_an_mode will always be passed to phylink_pcs_neg_mode(), and the active link_an_mode will be used for everything else, and only updated during phylink_major_config(). This will ensure that phylink_pcs_neg_mode()'s link_an_mode will not depend on the active link_an_mode that will, in a future patch, depend on pcs_neg_mode. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> --- drivers/net/phy/phylink.c | 60 ++++++++++++++++++++------------------- 1 file changed, 31 insertions(+), 29 deletions(-)