diff mbox series

[v3,2/4] arm64: defconfig: enable clock controller, interconnect and pinctrl for QCS8300

Message ID 20241128-qcs8300_initial_dtsi-v3-2-26aa8a164914@quicinc.com (mailing list archive)
State New
Headers show
Series Add initial support for QCS8300 SoC and QCS8300 RIDE board | expand

Commit Message

Jingyi Wang Nov. 28, 2024, 8:44 a.m. UTC 
Enable clock controller, interconnect and pinctrl for Qualcomm
QCS8300 platform to boot to UART console.

The serial engine depends on gcc, interconnect and pinctrl. Since
the serial console driver is only available as built-in, so these
configs needs be built-in for the UART device to probe and register
the console.

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
---
 arch/arm64/configs/defconfig | 3 +++
 1 file changed, 3 insertions(+)

Comments

Dmitry Baryshkov Nov. 28, 2024, 1:12 p.m. UTC | #1 
On Thu, Nov 28, 2024 at 04:44:44PM +0800, Jingyi Wang wrote:
> Enable clock controller, interconnect and pinctrl for Qualcomm
> QCS8300 platform to boot to UART console.

... which is used on the ABC DEF board. The defconfig is being enabled
for everybody, so at least let them know which board increases the size
of the default kernel build.

> 
> The serial engine depends on gcc, interconnect and pinctrl. Since
> the serial console driver is only available as built-in, so these
> configs needs be built-in for the UART device to probe and register
> the console.
> 
> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
> Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
> ---
>  arch/arm64/configs/defconfig | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index d13218d0c30f..3d9e48940c96 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -608,6 +608,7 @@ CONFIG_PINCTRL_MSM8996=y
>  CONFIG_PINCTRL_MSM8998=y
>  CONFIG_PINCTRL_QCM2290=y
>  CONFIG_PINCTRL_QCS404=y
> +CONFIG_PINCTRL_QCS8300=y
>  CONFIG_PINCTRL_QDF2XXX=y
>  CONFIG_PINCTRL_QDU1000=y
>  CONFIG_PINCTRL_SA8775P=y
> @@ -1327,6 +1328,7 @@ CONFIG_MSM_MMCC_8998=m
>  CONFIG_QCM_GCC_2290=y
>  CONFIG_QCM_DISPCC_2290=m
>  CONFIG_QCS_GCC_404=y
> +CONFIG_QCS_GCC_8300=y
>  CONFIG_SC_CAMCC_7280=m
>  CONFIG_QDU_GCC_1000=y
>  CONFIG_SC_CAMCC_8280XP=m
> @@ -1634,6 +1636,7 @@ CONFIG_INTERCONNECT_QCOM_MSM8996=y
>  CONFIG_INTERCONNECT_QCOM_OSM_L3=m
>  CONFIG_INTERCONNECT_QCOM_QCM2290=y
>  CONFIG_INTERCONNECT_QCOM_QCS404=m
> +CONFIG_INTERCONNECT_QCOM_QCS8300=y
>  CONFIG_INTERCONNECT_QCOM_QDU1000=y
>  CONFIG_INTERCONNECT_QCOM_SA8775P=y
>  CONFIG_INTERCONNECT_QCOM_SC7180=y
> 
> -- 
> 2.25.1
>
Jingyi Wang Nov. 29, 2024, 2:20 a.m. UTC | #2 
On 11/28/2024 9:12 PM, Dmitry Baryshkov wrote:
> On Thu, Nov 28, 2024 at 04:44:44PM +0800, Jingyi Wang wrote:
>> Enable clock controller, interconnect and pinctrl for Qualcomm
>> QCS8300 platform to boot to UART console.
> 
> ... which is used on the ABC DEF board. The defconfig is being enabled
> for everybody, so at least let them know which board increases the size
> of the default kernel build.
> 
will add that
>>
>> The serial engine depends on gcc, interconnect and pinctrl. Since
>> the serial console driver is only available as built-in, so these
>> configs needs be built-in for the UART device to probe and register
>> the console.
>>
>> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
>> Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
>> ---
>>  arch/arm64/configs/defconfig | 3 +++
>>  1 file changed, 3 insertions(+)
>>
>> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
>> index d13218d0c30f..3d9e48940c96 100644
>> --- a/arch/arm64/configs/defconfig
>> +++ b/arch/arm64/configs/defconfig
>> @@ -608,6 +608,7 @@ CONFIG_PINCTRL_MSM8996=y
>>  CONFIG_PINCTRL_MSM8998=y
>>  CONFIG_PINCTRL_QCM2290=y
>>  CONFIG_PINCTRL_QCS404=y
>> +CONFIG_PINCTRL_QCS8300=y
>>  CONFIG_PINCTRL_QDF2XXX=y
>>  CONFIG_PINCTRL_QDU1000=y
>>  CONFIG_PINCTRL_SA8775P=y
>> @@ -1327,6 +1328,7 @@ CONFIG_MSM_MMCC_8998=m
>>  CONFIG_QCM_GCC_2290=y
>>  CONFIG_QCM_DISPCC_2290=m
>>  CONFIG_QCS_GCC_404=y
>> +CONFIG_QCS_GCC_8300=y
>>  CONFIG_SC_CAMCC_7280=m
>>  CONFIG_QDU_GCC_1000=y
>>  CONFIG_SC_CAMCC_8280XP=m
>> @@ -1634,6 +1636,7 @@ CONFIG_INTERCONNECT_QCOM_MSM8996=y
>>  CONFIG_INTERCONNECT_QCOM_OSM_L3=m
>>  CONFIG_INTERCONNECT_QCOM_QCM2290=y
>>  CONFIG_INTERCONNECT_QCOM_QCS404=m
>> +CONFIG_INTERCONNECT_QCOM_QCS8300=y
>>  CONFIG_INTERCONNECT_QCOM_QDU1000=y
>>  CONFIG_INTERCONNECT_QCOM_SA8775P=y
>>  CONFIG_INTERCONNECT_QCOM_SC7180=y
>>
>> -- 
>> 2.25.1
>>
> 
Thanks,
Jingyi
diff mbox series

Patch

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index d13218d0c30f..3d9e48940c96 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -608,6 +608,7 @@  CONFIG_PINCTRL_MSM8996=y
 CONFIG_PINCTRL_MSM8998=y
 CONFIG_PINCTRL_QCM2290=y
 CONFIG_PINCTRL_QCS404=y
+CONFIG_PINCTRL_QCS8300=y
 CONFIG_PINCTRL_QDF2XXX=y
 CONFIG_PINCTRL_QDU1000=y
 CONFIG_PINCTRL_SA8775P=y
@@ -1327,6 +1328,7 @@  CONFIG_MSM_MMCC_8998=m
 CONFIG_QCM_GCC_2290=y
 CONFIG_QCM_DISPCC_2290=m
 CONFIG_QCS_GCC_404=y
+CONFIG_QCS_GCC_8300=y
 CONFIG_SC_CAMCC_7280=m
 CONFIG_QDU_GCC_1000=y
 CONFIG_SC_CAMCC_8280XP=m
@@ -1634,6 +1636,7 @@  CONFIG_INTERCONNECT_QCOM_MSM8996=y
 CONFIG_INTERCONNECT_QCOM_OSM_L3=m
 CONFIG_INTERCONNECT_QCOM_QCM2290=y
 CONFIG_INTERCONNECT_QCOM_QCS404=m
+CONFIG_INTERCONNECT_QCOM_QCS8300=y
 CONFIG_INTERCONNECT_QCOM_QDU1000=y
 CONFIG_INTERCONNECT_QCOM_SA8775P=y
 CONFIG_INTERCONNECT_QCOM_SC7180=y