| Message ID | 20241202090408.201662-1-jakob.unterwurzacher@cherry.de (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | arm64: dts: rockchip: increase gmac rx_delay to 0x11 on rk3399-puma | expand |
Hi Jakob, On 12/2/24 10:04 AM, Jakob Unterwurzacher wrote: > During mass manufacturing, we noticed the mmc_rx_crc_error counter, > as reported by "ethtool -S eth0 | grep mmc_rx_crc_error" to increase > above zero during nuttcp speedtests. > > Cycling through the rx_delay range on two boards shows that is a large > "good" region from 0x11 to 0x35 (see below for details). > Is this missing a "there" after that? "that there is a large good region"? > This commit increases rx_delay to 0x11, which is the smallest > possible change that fixes the issue we are seeing on the KSZ9031 PHY. > This also matches what most other rk3399 boards do. > > Tests for Puma PCBA S/N TT0069903: > > rx_delay mmc_rx_crc_error > -------- ---------------- > 0x09 (dhcp broken) > 0x10 897 > 0x11 0 > 0x20 0 > 0x30 0 > 0x35 0 > 0x3a 745 > 0x3b 11375 > 0x3c 36680 > 0x40 (dhcp broken) > 0x7f (dhcp broken) > > Tests for Puma PCBA S/N TT0157733: > > rx_delay mmc_rx_crc_error > -------- ---------------- > 0x10 59 > 0x11 0 > 0x35 0 > > Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@cherry.de> This would be a candidate for backporting I believe. Therefore, a Cc: <stable@vger.kernel.org> here would have been nice (in the commit log), c.f. https://www.kernel.org/doc/html/latest/process/submitting-patches.html#select-the-recipients-for-your-patch > --- > arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi > index 9efcdce0f593..13d0c511046b 100644 > --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi > +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi > @@ -181,7 +181,7 @@ &gmac { > snps,reset-active-low; > snps,reset-delays-us = <0 10000 50000>; > tx_delay = <0x10>; > - rx_delay = <0x10>; > + rx_delay = <0x11>; While at it, we could reorder this alphabetically and move rx_delay between pinctrl-0 and snps,reset-gpio? c.f. https://www.kernel.org/doc/html/latest/devicetree/bindings/dts-coding-style.html#order-of-properties-in-device-node rx_delay and tx_delay seem to be vendor-specific but without the vendor prefix, but so is snps,reset-gpio so that should be fine to reorder this way. Considering we have an option for KSZ9031 on RK3588 Jaguar and RK3588 Tiger and the "same" MAC IP is used and that we use the same TXD and RXD delay than on RK3399 Puma right now, I guess we would want to check those don't need a change as well? (funnily enough, all RK3588-based boards in 6.12 actually have 0x00 for rx_delay and 0x43/0x44 for tx_delay, except ours which are at 0x10). Not a blocker for this patch though, so: Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de> Thanks! Quentin
Am Montag, 2. Dezember 2024, 10:52:06 CET schrieb Quentin Schulz: > Hi Jakob, > > On 12/2/24 10:04 AM, Jakob Unterwurzacher wrote: > > During mass manufacturing, we noticed the mmc_rx_crc_error counter, > > as reported by "ethtool -S eth0 | grep mmc_rx_crc_error" to increase > > above zero during nuttcp speedtests. > > > > Cycling through the rx_delay range on two boards shows that is a large > > "good" region from 0x11 to 0x35 (see below for details). > > > > Is this missing a "there" after that? "that there is a large good region"? > > > This commit increases rx_delay to 0x11, which is the smallest > > possible change that fixes the issue we are seeing on the KSZ9031 PHY. > > This also matches what most other rk3399 boards do. > > > > Tests for Puma PCBA S/N TT0069903: > > > > rx_delay mmc_rx_crc_error > > -------- ---------------- > > 0x09 (dhcp broken) > > 0x10 897 > > 0x11 0 > > 0x20 0 > > 0x30 0 > > 0x35 0 > > 0x3a 745 > > 0x3b 11375 > > 0x3c 36680 > > 0x40 (dhcp broken) > > 0x7f (dhcp broken) > > > > Tests for Puma PCBA S/N TT0157733: > > > > rx_delay mmc_rx_crc_error > > -------- ---------------- > > 0x10 59 > > 0x11 0 > > 0x35 0 > > > > Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@cherry.de> > > This would be a candidate for backporting I believe. > > Therefore, a also please include a Fixes: 2c66fc34e945 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM") > Cc: <stable@vger.kernel.org> > > here would have been nice (in the commit log), c.f. > https://www.kernel.org/doc/html/latest/process/submitting-patches.html#select-the-recipients-for-your-patch > > > --- > > arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi > > index 9efcdce0f593..13d0c511046b 100644 > > --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi > > +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi > > @@ -181,7 +181,7 @@ &gmac { > > snps,reset-active-low; > > snps,reset-delays-us = <0 10000 50000>; > > tx_delay = <0x10>; > > - rx_delay = <0x10>; > > + rx_delay = <0x11>; > > While at it, we could reorder this alphabetically and move rx_delay I would disagree. This is a "fix", so should ideally only do the minimal changes to make life of the stable people easier. Doing this one-line change is way easier to understand than stuff also moving around. Heiko > between pinctrl-0 and snps,reset-gpio? c.f. > https://www.kernel.org/doc/html/latest/devicetree/bindings/dts-coding-style.html#order-of-properties-in-device-node > rx_delay and tx_delay seem to be vendor-specific but without the vendor > prefix, but so is snps,reset-gpio so that should be fine to reorder this > way. > > Considering we have an option for KSZ9031 on RK3588 Jaguar and RK3588 > Tiger and the "same" MAC IP is used and that we use the same TXD and RXD > delay than on RK3399 Puma right now, I guess we would want to check > those don't need a change as well? (funnily enough, all RK3588-based > boards in 6.12 actually have 0x00 for rx_delay and 0x43/0x44 for > tx_delay, except ours which are at 0x10). Not a blocker for this patch > though, so: > > Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de> > > Thanks! > Quentin >
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index 9efcdce0f593..13d0c511046b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -181,7 +181,7 @@ &gmac { snps,reset-active-low; snps,reset-delays-us = <0 10000 50000>; tx_delay = <0x10>; - rx_delay = <0x10>; + rx_delay = <0x11>; status = "okay"; };
During mass manufacturing, we noticed the mmc_rx_crc_error counter, as reported by "ethtool -S eth0 | grep mmc_rx_crc_error" to increase above zero during nuttcp speedtests. Cycling through the rx_delay range on two boards shows that is a large "good" region from 0x11 to 0x35 (see below for details). This commit increases rx_delay to 0x11, which is the smallest possible change that fixes the issue we are seeing on the KSZ9031 PHY. This also matches what most other rk3399 boards do. Tests for Puma PCBA S/N TT0069903: rx_delay mmc_rx_crc_error -------- ---------------- 0x09 (dhcp broken) 0x10 897 0x11 0 0x20 0 0x30 0 0x35 0 0x3a 745 0x3b 11375 0x3c 36680 0x40 (dhcp broken) 0x7f (dhcp broken) Tests for Puma PCBA S/N TT0157733: rx_delay mmc_rx_crc_error -------- ---------------- 0x10 59 0x11 0 0x35 0 Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@cherry.de> --- arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)