Message ID | 20241205150730.3132807-2-alexander.stein@ew.tq-group.com (mailing list archive) |
---|---|
State | New |
Headers | show |
Series | [v2,1/2] arm64: dt: imx93-tqma9352-mba93xxca: enable Open Drain for MDIO | expand |
> Subject: [PATCH v2 2/2] arm64: dt: imx93-tqma9352-mba93xxla: > enable Open Drain for MDIO s/dt/dts > > From: Markus Niebel <Markus.Niebel@ew.tq-group.com> > > The board has a pull-up resistor for MDIO pin per PHY design guide. > When MDIO is idle, it needs to be high and open drain is better to be > used here for power saving. > > Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> > Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Besides the typo: Reviewed-by: Peng Fan <peng.fan@nxp.com>
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts index 0b4b3bb866d06..2e953a05c590e 100644 --- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts +++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts @@ -597,8 +597,8 @@ pinctrl_eqos: eqosgrp { fsl,pins = < /* PD | FSEL_2 | DSE X4 */ MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x51e - /* SION | HYS | FSEL_2 | DSE X4 */ - MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x4000111e + /* SION | HYS | ODE | FSEL_2 | DSE X4 */ + MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x4000191e /* HYS | FSEL_0 | DSE no drive */ MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x1000 MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x1000 @@ -629,8 +629,8 @@ pinctrl_fec: fecgrp { fsl,pins = < /* PD | FSEL_2 | DSE X4 */ MX93_PAD_ENET2_MDC__ENET1_MDC 0x51e - /* SION | HYS | FSEL_2 | DSE X4 */ - MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x4000111e + /* SION | HYS | ODE | FSEL_2 | DSE X4 */ + MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x4000191e /* HYS | FSEL_0 | DSE no drive */ MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x1000 MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x1000