diff mbox series

[01/15] ARM: zynq: Replace 'io-standard' with 'power-source' property

Message ID cf45ed95fe0be083446d5aaf5f946f38acba7728.1733920873.git.michal.simek@amd.com (mailing list archive)
State New
Headers show
Series ARM: zynq: Sync DTs with U-Boot | expand

Commit Message

Michal Simek Dec. 11, 2024, 12:41 p.m. UTC 
From: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>

Replace 'io-standard' property with 'power-source' property in all
zynq dts files to be in sync with Zynq Pinctrl driver.

Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
---

 arch/arm/boot/dts/xilinx/zynq-zc702.dts | 22 +++++++++++-----------
 arch/arm/boot/dts/xilinx/zynq-zc706.dts | 18 +++++++++---------
 2 files changed, 20 insertions(+), 20 deletions(-)

Comments

Peter Korsgaard Dec. 11, 2024, 6:54 p.m. UTC | #1 
On 12/11/24 13:41, Michal Simek wrote:
> From: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
> 
> Replace 'io-standard' property with 'power-source' property in all
> zynq dts files to be in sync with Zynq Pinctrl driver.
> 
> Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> Signed-off-by: Michal Simek <michal.simek@amd.com>

Reviewed-by: Peter Korsgaard <peter@korsgaard.com>

>   			slew-rate = <0>;
> -			io-standard = <1>;
> +			power-source = <1>;

It would be nice to replace those magic numbers with the corresponding 
IO_STANDARD_* defines for readability.
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/xilinx/zynq-zc702.dts b/arch/arm/boot/dts/xilinx/zynq-zc702.dts
index 6efdbca9d3ef..a933c0341b69 100644
--- a/arch/arm/boot/dts/xilinx/zynq-zc702.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-zc702.dts
@@ -210,7 +210,7 @@  mux {
 		conf {
 			groups = "can0_9_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		conf-rx {
@@ -233,7 +233,7 @@  mux {
 		conf {
 			groups = "ethernet0_0_grp";
 			slew-rate = <0>;
-			io-standard = <4>;
+			power-source = <4>;
 		};
 
 		conf-rx {
@@ -256,7 +256,7 @@  mux-mdio {
 		conf-mdio {
 			groups = "mdio0_0_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 			bias-disable;
 		};
 	};
@@ -274,7 +274,7 @@  conf {
 				 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
 				 "gpio0_13_grp", "gpio0_14_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		conf-pull-up {
@@ -298,7 +298,7 @@  conf {
 			groups = "i2c0_10_grp";
 			bias-pull-up;
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 	};
 
@@ -311,7 +311,7 @@  mux {
 		conf {
 			groups = "gpio0_50_grp", "gpio0_51_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 	};
 
@@ -324,7 +324,7 @@  mux {
 		conf {
 			groups = "sdio0_2_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 			bias-disable;
 		};
 
@@ -338,7 +338,7 @@  conf-cd {
 			bias-high-impedance;
 			bias-pull-up;
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		mux-wp {
@@ -351,7 +351,7 @@  conf-wp {
 			bias-high-impedance;
 			bias-pull-up;
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 	};
 
@@ -364,7 +364,7 @@  mux {
 		conf {
 			groups = "uart1_10_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		conf-rx {
@@ -387,7 +387,7 @@  mux {
 		conf {
 			groups = "usb0_0_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		conf-rx {
diff --git a/arch/arm/boot/dts/xilinx/zynq-zc706.dts b/arch/arm/boot/dts/xilinx/zynq-zc706.dts
index 77943c16d33f..d21e3ae4ebb2 100644
--- a/arch/arm/boot/dts/xilinx/zynq-zc706.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-zc706.dts
@@ -150,7 +150,7 @@  mux {
 		conf {
 			groups = "ethernet0_0_grp";
 			slew-rate = <0>;
-			io-standard = <4>;
+			power-source = <4>;
 		};
 
 		conf-rx {
@@ -173,7 +173,7 @@  mux-mdio {
 		conf-mdio {
 			groups = "mdio0_0_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 			bias-disable;
 		};
 	};
@@ -187,7 +187,7 @@  mux {
 		conf {
 			groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		conf-pull-up {
@@ -211,7 +211,7 @@  conf {
 			groups = "i2c0_10_grp";
 			bias-pull-up;
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 	};
 
@@ -224,7 +224,7 @@  mux {
 		conf {
 			groups = "sdio0_2_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 			bias-disable;
 		};
 
@@ -238,7 +238,7 @@  conf-cd {
 			bias-high-impedance;
 			bias-pull-up;
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		mux-wp {
@@ -251,7 +251,7 @@  conf-wp {
 			bias-high-impedance;
 			bias-pull-up;
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 	};
 
@@ -264,7 +264,7 @@  mux {
 		conf {
 			groups = "uart1_10_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		conf-rx {
@@ -287,7 +287,7 @@  mux {
 		conf {
 			groups = "usb0_0_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		conf-rx {