diff mbox series

[v3,5/6] arm64: dts: aspeed: Add initial AST2700 EVB device tree

Message ID 20241212155237.848336-8-kevin_chen@aspeedtech.com (mailing list archive)
State Changes Requested
Headers show
Series Introduce ASPEED AST27XX BMC SoC | expand

Commit Message

Kevin Chen Dec. 12, 2024, 3:52 p.m. UTC 
Add EVB board of AST2700 in ASPEED Architecture.

Signed-off-by: Kevin Chen <kevin_chen@aspeedtech.com>
---
 arch/arm64/boot/dts/aspeed/Makefile        |  4 ++
 arch/arm64/boot/dts/aspeed/ast2700-evb.dts | 57 ++++++++++++++++++++++
 2 files changed, 61 insertions(+)
 create mode 100644 arch/arm64/boot/dts/aspeed/Makefile
 create mode 100644 arch/arm64/boot/dts/aspeed/ast2700-evb.dts

Comments

Krzysztof Kozlowski Dec. 13, 2024, 8:03 a.m. UTC | #1 
On 12/12/2024 16:52, Kevin Chen wrote:
> Add EVB board of AST2700 in ASPEED Architecture.
> 
> Signed-off-by: Kevin Chen <kevin_chen@aspeedtech.com>
> ---
>  arch/arm64/boot/dts/aspeed/Makefile        |  4 ++
>  arch/arm64/boot/dts/aspeed/ast2700-evb.dts | 57 ++++++++++++++++++++++
>  2 files changed, 61 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/aspeed/Makefile
>  create mode 100644 arch/arm64/boot/dts/aspeed/ast2700-evb.dts
> 
> diff --git a/arch/arm64/boot/dts/aspeed/Makefile b/arch/arm64/boot/dts/aspeed/Makefile
> new file mode 100644
> index 000000000000..ffe7e15017cc
> --- /dev/null
> +++ b/arch/arm64/boot/dts/aspeed/Makefile
> @@ -0,0 +1,4 @@
> +# SPDX-License-Identifier: GPL-2.0
> +
> +dtb-$(CONFIG_ARCH_ASPEED) += \
> +	ast2700-evb.dtb
> diff --git a/arch/arm64/boot/dts/aspeed/ast2700-evb.dts b/arch/arm64/boot/dts/aspeed/ast2700-evb.dts
> new file mode 100644
> index 000000000000..6dad88c98ce0
> --- /dev/null
> +++ b/arch/arm64/boot/dts/aspeed/ast2700-evb.dts
> @@ -0,0 +1,57 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +
> +/dts-v1/;
> +
> +#include "aspeed-g7.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +
> +/ {
> +	model = "AST2700A1-EVB";
> +	compatible = "aspeed,ast2700-evb", "aspeed,ast2700";
> +
> +	aliases {
> +		serial12 = &uart12;
> +	};
> +
> +	chosen {
> +		bootargs = "console=ttyS12,115200n8";
> +		stdout-path = &uart12;

Nothing improved. You keep ignoring my comments: not responding, not
addressing, not fixing the code.

> +	};
> +
> +	firmware {
> +		optee: optee {
> +			compatible = "linaro,optee-tz";
> +			method = "smc";
> +		};
> +	};
> +
> +	memory@400000000 {
> +		device_type = "memory";
> +		reg = <0x4 0x00000000 0x40000000>;
> +	};
> +
> +	reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <1>;
> +		ranges;
> +
> +		mcu_fw: mcu-firmware@42fe00000 {
> +			reg = <0x4 0x2fe00000 0x200000>;
> +			no-map;
> +		};
> +
> +		atf: trusted-firmware-a@430000000 {
> +			reg = <0x4 0x30000000 0x80000>;
> +			no-map;
> +		};
> +
> +		optee_core: optee_core@430080000 {

Follow DTS Coding style document. That's the same comment as before.


Best regards,
Krzysztof
Kevin Chen Dec. 16, 2024, 3:58 a.m. UTC | #2 
Hi Krzk,

> > Add EVB board of AST2700 in ASPEED Architecture.
> >
> > Signed-off-by: Kevin Chen <kevin_chen@aspeedtech.com>
> > ---
> >  arch/arm64/boot/dts/aspeed/Makefile        |  4 ++
> >  arch/arm64/boot/dts/aspeed/ast2700-evb.dts | 57
> > ++++++++++++++++++++++
> >  2 files changed, 61 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/aspeed/Makefile
> >  create mode 100644 arch/arm64/boot/dts/aspeed/ast2700-evb.dts
> >
> > diff --git a/arch/arm64/boot/dts/aspeed/Makefile
> > b/arch/arm64/boot/dts/aspeed/Makefile
> > new file mode 100644
> > index 000000000000..ffe7e15017cc
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/aspeed/Makefile
> > @@ -0,0 +1,4 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +
> > +dtb-$(CONFIG_ARCH_ASPEED) += \
> > +	ast2700-evb.dtb
> > diff --git a/arch/arm64/boot/dts/aspeed/ast2700-evb.dts
> > b/arch/arm64/boot/dts/aspeed/ast2700-evb.dts
> > new file mode 100644
> > index 000000000000..6dad88c98ce0
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/aspeed/ast2700-evb.dts
> > @@ -0,0 +1,57 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later
> > +
> > +/dts-v1/;
> > +
> > +#include "aspeed-g7.dtsi"
> > +#include <dt-bindings/gpio/aspeed-gpio.h>
> > +
> > +/ {
> > +	model = "AST2700A1-EVB";
> > +	compatible = "aspeed,ast2700-evb", "aspeed,ast2700";
> > +
> > +	aliases {
> > +		serial12 = &uart12;
> > +	};
> > +
> > +	chosen {
> > +		bootargs = "console=ttyS12,115200n8";
> > +		stdout-path = &uart12;
> 
> Nothing improved. You keep ignoring my comments: not responding, not
> addressing, not fixing the code.
OK. I will remove the bootargs.

> 
> > +	};
> > +
> > +	firmware {
> > +		optee: optee {
> > +			compatible = "linaro,optee-tz";
> > +			method = "smc";
> > +		};
> > +	};
> > +
> > +	memory@400000000 {
> > +		device_type = "memory";
> > +		reg = <0x4 0x00000000 0x40000000>;
> > +	};
> > +
> > +	reserved-memory {
> > +		#address-cells = <2>;
> > +		#size-cells = <1>;
> > +		ranges;
> > +
> > +		mcu_fw: mcu-firmware@42fe00000 {
> > +			reg = <0x4 0x2fe00000 0x200000>;
> > +			no-map;
> > +		};
> > +
> > +		atf: trusted-firmware-a@430000000 {
> > +			reg = <0x4 0x30000000 0x80000>;
> > +			no-map;
> > +		};
> > +
> > +		optee_core: optee_core@430080000 {
> 
> Follow DTS Coding style document. That's the same comment as before.
OK. I will fix to optee-core:optee-core@430080000 {

> 
> 
> Best regards,
> Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/aspeed/Makefile b/arch/arm64/boot/dts/aspeed/Makefile
new file mode 100644
index 000000000000..ffe7e15017cc
--- /dev/null
+++ b/arch/arm64/boot/dts/aspeed/Makefile
@@ -0,0 +1,4 @@ 
+# SPDX-License-Identifier: GPL-2.0
+
+dtb-$(CONFIG_ARCH_ASPEED) += \
+	ast2700-evb.dtb
diff --git a/arch/arm64/boot/dts/aspeed/ast2700-evb.dts b/arch/arm64/boot/dts/aspeed/ast2700-evb.dts
new file mode 100644
index 000000000000..6dad88c98ce0
--- /dev/null
+++ b/arch/arm64/boot/dts/aspeed/ast2700-evb.dts
@@ -0,0 +1,57 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/dts-v1/;
+
+#include "aspeed-g7.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "AST2700A1-EVB";
+	compatible = "aspeed,ast2700-evb", "aspeed,ast2700";
+
+	aliases {
+		serial12 = &uart12;
+	};
+
+	chosen {
+		bootargs = "console=ttyS12,115200n8";
+		stdout-path = &uart12;
+	};
+
+	firmware {
+		optee: optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	memory@400000000 {
+		device_type = "memory";
+		reg = <0x4 0x00000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		mcu_fw: mcu-firmware@42fe00000 {
+			reg = <0x4 0x2fe00000 0x200000>;
+			no-map;
+		};
+
+		atf: trusted-firmware-a@430000000 {
+			reg = <0x4 0x30000000 0x80000>;
+			no-map;
+		};
+
+		optee_core: optee_core@430080000 {
+			reg = <0x4 0x30080000 0x1000000>;
+			no-map;
+		};
+	};
+};
+
+&uart12 {
+	status = "okay";
+};