Message ID | 20241217084511.2981515-8-quic_periyasa@quicinc.com (mailing list archive) |
---|---|
State | Under Review |
Delegated to: | Jeff Johnson |
Headers | show |
Series | wifi: ath12k: Refactor the monitor status Rx path | expand |
Karthikeyan Periyasamy <quic_periyasa@quicinc.com> writes: > The Tx monitor SRNG ring ID does not align with the ath12k 802.11be > hardware architecture. Currently, there is no issue since the Tx monitor > is not enabled. However, in the future, the Tx monitor will be enabled. > Therefore, change the HAL_SRNG_RING_ID_WMAC1_SW2TXMON_BUF0 SRNG ID and > assign the correct start ring ID for the ring type HAL_TX_MONITOR_BUF. > > Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 > Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 > > Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> > Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org>
diff --git a/drivers/net/wireless/ath/ath12k/hal.c b/drivers/net/wireless/ath/ath12k/hal.c index fd98fac16dd5..cd59ff8e6c7b 100644 --- a/drivers/net/wireless/ath/ath12k/hal.c +++ b/drivers/net/wireless/ath/ath12k/hal.c @@ -181,7 +181,7 @@ static const struct hal_srng_config hw_srng_config_template[] = { .max_size = HAL_WBM2PPE_RELEASE_RING_BASE_MSB_RING_SIZE, }, [HAL_TX_MONITOR_BUF] = { - .start_ring_id = HAL_SRNG_SW2TXMON_BUF0, + .start_ring_id = HAL_SRNG_RING_ID_WMAC1_SW2TXMON_BUF0, .max_rings = 1, .entry_size = sizeof(struct hal_mon_buf_ring) >> 2, .mac_type = ATH12K_HAL_SRNG_PMAC, diff --git a/drivers/net/wireless/ath/ath12k/hal.h b/drivers/net/wireless/ath/ath12k/hal.h index 8a78bb9a10bc..94e2e8735958 100644 --- a/drivers/net/wireless/ath/ath12k/hal.h +++ b/drivers/net/wireless/ath/ath12k/hal.h @@ -485,8 +485,8 @@ enum hal_srng_ring_id { HAL_SRNG_RING_ID_WMAC1_RXMON2SW0 = HAL_SRNG_RING_ID_WMAC1_RXDMA2SW1, HAL_SRNG_RING_ID_WMAC1_SW2RXDMA1_DESC, HAL_SRNG_RING_ID_RXDMA_DIR_BUF, - HAL_SRNG_RING_ID_WMAC1_SW2TXMON_BUF0, HAL_SRNG_RING_ID_WMAC1_TXMON2SW0_BUF0, + HAL_SRNG_RING_ID_WMAC1_SW2TXMON_BUF0, HAL_SRNG_RING_ID_PMAC1_ID_END, };