diff mbox series

[net,v2] bonding: Correctly support GSO ESP offload

Message ID 20250124085744.434869-1-cratiu@nvidia.com (mailing list archive)
State New
Headers show
Series [net,v2] bonding: Correctly support GSO ESP offload | expand

Commit Message

Cosmin Ratiu Jan. 24, 2025, 8:57 a.m. UTC
The referenced fix is incomplete. It correctly computes
bond_dev->gso_partial_features across slaves, but unfortunately
netdev_fix_features discards gso_partial_features from the feature set
if NETIF_F_GSO_PARTIAL isn't set in bond_dev->features.

This is visible with ethtool -k bond0 | grep esp:
tx-esp-segmentation: off [requested on]
esp-hw-offload: on
esp-tx-csum-hw-offload: on

This patch reworks the bonding GSO offload support by:
- making aggregating gso_partial_features across slaves similar to the
  other feature sets (this part is a no-op).
- advertising the default partial gso features on empty bond devs, same
  as with other feature sets (also a no-op).
- adding NETIF_F_GSO_PARTIAL to hw_enc_features filtered across slaves.
- adding NETIF_F_GSO_PARTIAL to features in bond_setup()

With all of these, 'ethtool -k bond0 | grep esp' now reports:
tx-esp-segmentation: on
esp-hw-offload: on
esp-tx-csum-hw-offload: on

Fixes: 4861333b4217 ("bonding: add ESP offload features when slaves support")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
---
 drivers/net/bonding/bond_main.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

Comments

Hangbin Liu Jan. 24, 2025, 9:54 a.m. UTC | #1
On Fri, Jan 24, 2025 at 10:57:44AM +0200, Cosmin Ratiu wrote:
> ---
>  drivers/net/bonding/bond_main.c | 19 ++++++++++---------
>  1 file changed, 10 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
> index 7b78c2bada81..e45bba240cbc 100644
> --- a/drivers/net/bonding/bond_main.c
> +++ b/drivers/net/bonding/bond_main.c
> @@ -1538,17 +1538,20 @@ static netdev_features_t bond_fix_features(struct net_device *dev,
>  				 NETIF_F_HIGHDMA | NETIF_F_LRO)
>  
>  #define BOND_ENC_FEATURES	(NETIF_F_HW_CSUM | NETIF_F_SG | \
> -				 NETIF_F_RXCSUM | NETIF_F_GSO_SOFTWARE)
> +				 NETIF_F_RXCSUM | NETIF_F_GSO_SOFTWARE | \
> +				 NETIF_F_GSO_PARTIAL)
>  
>  #define BOND_MPLS_FEATURES	(NETIF_F_HW_CSUM | NETIF_F_SG | \
>  				 NETIF_F_GSO_SOFTWARE)
>  
> +#define BOND_GSO_PARTIAL_FEATURES (NETIF_F_GSO_ESP)
> +
>  
>  static void bond_compute_features(struct bonding *bond)
>  {
> +	netdev_features_t gso_partial_features = BOND_GSO_PARTIAL_FEATURES;
>  	unsigned int dst_release_flag = IFF_XMIT_DST_RELEASE |
>  					IFF_XMIT_DST_RELEASE_PERM;
> -	netdev_features_t gso_partial_features = NETIF_F_GSO_ESP;
>  	netdev_features_t vlan_features = BOND_VLAN_FEATURES;
>  	netdev_features_t enc_features  = BOND_ENC_FEATURES;
>  #ifdef CONFIG_XFRM_OFFLOAD
> @@ -1582,8 +1585,9 @@ static void bond_compute_features(struct bonding *bond)
>  							  BOND_XFRM_FEATURES);
>  #endif /* CONFIG_XFRM_OFFLOAD */
>  
> -		if (slave->dev->hw_enc_features & NETIF_F_GSO_PARTIAL)
> -			gso_partial_features &= slave->dev->gso_partial_features;
> +		gso_partial_features = netdev_increment_features(gso_partial_features,
> +								 slave->dev->gso_partial_features,
> +								 BOND_GSO_PARTIAL_FEATURES);
>  
>  		mpls_features = netdev_increment_features(mpls_features,
>  							  slave->dev->mpls_features,
> @@ -1598,12 +1602,8 @@ static void bond_compute_features(struct bonding *bond)
>  	}
>  	bond_dev->hard_header_len = max_hard_header_len;
>  
> -	if (gso_partial_features & NETIF_F_GSO_ESP)
> -		bond_dev->gso_partial_features |= NETIF_F_GSO_ESP;
> -	else
> -		bond_dev->gso_partial_features &= ~NETIF_F_GSO_ESP;
> -
>  done:
> +	bond_dev->gso_partial_features = gso_partial_features;
>  	bond_dev->vlan_features = vlan_features;
>  	bond_dev->hw_enc_features = enc_features | NETIF_F_GSO_ENCAP_ALL |
>  				    NETIF_F_HW_VLAN_CTAG_TX |

        if (!bond_has_slaves(bond))
                goto done;

If there is no slaves, should we add the gso_partial_features?

Thanks
Hangbin
> @@ -6046,6 +6046,7 @@ void bond_setup(struct net_device *bond_dev)
>  	bond_dev->hw_features |= NETIF_F_GSO_ENCAP_ALL;
>  	bond_dev->features |= bond_dev->hw_features;
>  	bond_dev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_STAG_TX;
> +	bond_dev->features |= NETIF_F_GSO_PARTIAL;
>  #ifdef CONFIG_XFRM_OFFLOAD
>  	bond_dev->hw_features |= BOND_XFRM_FEATURES;
>  	/* Only enable XFRM features if this is an active-backup config */
> -- 
> 2.45.0
>
Cosmin Ratiu Jan. 24, 2025, 10:35 a.m. UTC | #2
On Fri, 2025-01-24 at 09:54 +0000, Hangbin Liu wrote:
> On Fri, Jan 24, 2025 at 10:57:44AM +0200, Cosmin Ratiu wrote:
> > ---
> >  drivers/net/bonding/bond_main.c | 19 ++++++++++---------
> >  1 file changed, 10 insertions(+), 9 deletions(-)
> > 
> > diff --git a/drivers/net/bonding/bond_main.c
> > b/drivers/net/bonding/bond_main.c
> > index 7b78c2bada81..e45bba240cbc 100644
> > --- a/drivers/net/bonding/bond_main.c
> > +++ b/drivers/net/bonding/bond_main.c
> > @@ -1538,17 +1538,20 @@ static netdev_features_t
> > bond_fix_features(struct net_device *dev,
> >  				 NETIF_F_HIGHDMA | NETIF_F_LRO)
> >  
> >  #define BOND_ENC_FEATURES	(NETIF_F_HW_CSUM | NETIF_F_SG | \
> > -				 NETIF_F_RXCSUM |
> > NETIF_F_GSO_SOFTWARE)
> > +				 NETIF_F_RXCSUM |
> > NETIF_F_GSO_SOFTWARE | \
> > +				 NETIF_F_GSO_PARTIAL)
> >  
> >  #define BOND_MPLS_FEATURES	(NETIF_F_HW_CSUM | NETIF_F_SG | \
> >  				 NETIF_F_GSO_SOFTWARE)
> >  
> > +#define BOND_GSO_PARTIAL_FEATURES (NETIF_F_GSO_ESP)
> > +
> >  
> >  static void bond_compute_features(struct bonding *bond)
> >  {
> > +	netdev_features_t gso_partial_features =
> > BOND_GSO_PARTIAL_FEATURES;
> >  	unsigned int dst_release_flag = IFF_XMIT_DST_RELEASE |
> >  					IFF_XMIT_DST_RELEASE_PERM;
> > -	netdev_features_t gso_partial_features = NETIF_F_GSO_ESP;
> >  	netdev_features_t vlan_features = BOND_VLAN_FEATURES;
> >  	netdev_features_t enc_features  = BOND_ENC_FEATURES;
> >  #ifdef CONFIG_XFRM_OFFLOAD
> > @@ -1582,8 +1585,9 @@ static void bond_compute_features(struct
> > bonding *bond)
> >  							 
> > BOND_XFRM_FEATURES);
> >  #endif /* CONFIG_XFRM_OFFLOAD */
> >  
> > -		if (slave->dev->hw_enc_features &
> > NETIF_F_GSO_PARTIAL)
> > -			gso_partial_features &= slave->dev-
> > >gso_partial_features;
> > +		gso_partial_features =
> > netdev_increment_features(gso_partial_features,
> > +								
> > slave->dev->gso_partial_features,
> > +								
> > BOND_GSO_PARTIAL_FEATURES);
> >  
> >  		mpls_features =
> > netdev_increment_features(mpls_features,
> >  							  slave-
> > >dev->mpls_features,
> > @@ -1598,12 +1602,8 @@ static void bond_compute_features(struct
> > bonding *bond)
> >  	}
> >  	bond_dev->hard_header_len = max_hard_header_len;
> >  
> > -	if (gso_partial_features & NETIF_F_GSO_ESP)
> > -		bond_dev->gso_partial_features |= NETIF_F_GSO_ESP;
> > -	else
> > -		bond_dev->gso_partial_features &=
> > ~NETIF_F_GSO_ESP;
> > -
> >  done:
> > +	bond_dev->gso_partial_features = gso_partial_features;
> >  	bond_dev->vlan_features = vlan_features;
> >  	bond_dev->hw_enc_features = enc_features |
> > NETIF_F_GSO_ENCAP_ALL |
> >  				    NETIF_F_HW_VLAN_CTAG_TX |
> 
>         if (!bond_has_slaves(bond))
>                 goto done;
> 
> If there is no slaves, should we add the gso_partial_features?

The other partial feature sets are added after 'done:', why not do the
same for gso_partial_features for consistency? 'gso_partial_features'
is otherwise not set anywhere else and relies on it being set to zero
when allocated in alloc_netdev_mqs. I think it's better for it to be
explicitly initialized in all cases here, like the other feature sets.

Cosmin.
Hangbin Liu Jan. 24, 2025, 11:10 a.m. UTC | #3
On Fri, Jan 24, 2025 at 10:35:40AM +0000, Cosmin Ratiu wrote:
> On Fri, 2025-01-24 at 09:54 +0000, Hangbin Liu wrote:
> > On Fri, Jan 24, 2025 at 10:57:44AM +0200, Cosmin Ratiu wrote:
> > > ---
> > >  drivers/net/bonding/bond_main.c | 19 ++++++++++---------
> > >  1 file changed, 10 insertions(+), 9 deletions(-)
> > > 
> > > diff --git a/drivers/net/bonding/bond_main.c
> > > b/drivers/net/bonding/bond_main.c
> > > index 7b78c2bada81..e45bba240cbc 100644
> > > --- a/drivers/net/bonding/bond_main.c
> > > +++ b/drivers/net/bonding/bond_main.c
> > > @@ -1538,17 +1538,20 @@ static netdev_features_t
> > > bond_fix_features(struct net_device *dev,
> > >  				 NETIF_F_HIGHDMA | NETIF_F_LRO)
> > >  
> > >  #define BOND_ENC_FEATURES	(NETIF_F_HW_CSUM | NETIF_F_SG | \
> > > -				 NETIF_F_RXCSUM |
> > > NETIF_F_GSO_SOFTWARE)
> > > +				 NETIF_F_RXCSUM |
> > > NETIF_F_GSO_SOFTWARE | \
> > > +				 NETIF_F_GSO_PARTIAL)
> > >  
> > >  #define BOND_MPLS_FEATURES	(NETIF_F_HW_CSUM | NETIF_F_SG | \
> > >  				 NETIF_F_GSO_SOFTWARE)
> > >  
> > > +#define BOND_GSO_PARTIAL_FEATURES (NETIF_F_GSO_ESP)
> > > +
> > >  
> > >  static void bond_compute_features(struct bonding *bond)
> > >  {
> > > +	netdev_features_t gso_partial_features =
> > > BOND_GSO_PARTIAL_FEATURES;
> > >  	unsigned int dst_release_flag = IFF_XMIT_DST_RELEASE |
> > >  					IFF_XMIT_DST_RELEASE_PERM;
> > > -	netdev_features_t gso_partial_features = NETIF_F_GSO_ESP;
> > >  	netdev_features_t vlan_features = BOND_VLAN_FEATURES;
> > >  	netdev_features_t enc_features  = BOND_ENC_FEATURES;
> > >  #ifdef CONFIG_XFRM_OFFLOAD
> > > @@ -1582,8 +1585,9 @@ static void bond_compute_features(struct
> > > bonding *bond)
> > >  							 
> > > BOND_XFRM_FEATURES);
> > >  #endif /* CONFIG_XFRM_OFFLOAD */
> > >  
> > > -		if (slave->dev->hw_enc_features &
> > > NETIF_F_GSO_PARTIAL)
> > > -			gso_partial_features &= slave->dev-
> > > >gso_partial_features;
> > > +		gso_partial_features =
> > > netdev_increment_features(gso_partial_features,
> > > +								
> > > slave->dev->gso_partial_features,
> > > +								
> > > BOND_GSO_PARTIAL_FEATURES);
> > >  
> > >  		mpls_features =
> > > netdev_increment_features(mpls_features,
> > >  							  slave-
> > > >dev->mpls_features,
> > > @@ -1598,12 +1602,8 @@ static void bond_compute_features(struct
> > > bonding *bond)
> > >  	}
> > >  	bond_dev->hard_header_len = max_hard_header_len;
> > >  
> > > -	if (gso_partial_features & NETIF_F_GSO_ESP)
> > > -		bond_dev->gso_partial_features |= NETIF_F_GSO_ESP;
> > > -	else
> > > -		bond_dev->gso_partial_features &=
> > > ~NETIF_F_GSO_ESP;
> > > -
> > >  done:
> > > +	bond_dev->gso_partial_features = gso_partial_features;
> > >  	bond_dev->vlan_features = vlan_features;
> > >  	bond_dev->hw_enc_features = enc_features |
> > > NETIF_F_GSO_ENCAP_ALL |
> > >  				    NETIF_F_HW_VLAN_CTAG_TX |
> > 
> >         if (!bond_has_slaves(bond))
> >                 goto done;
> > 
> > If there is no slaves, should we add the gso_partial_features?
> 
> The other partial feature sets are added after 'done:', why not do the
> same for gso_partial_features for consistency? 'gso_partial_features'
> is otherwise not set anywhere else and relies on it being set to zero
> when allocated in alloc_netdev_mqs. I think it's better for it to be
> explicitly initialized in all cases here, like the other feature sets.
> 
> Cosmin.

OK.

Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
diff mbox series

Patch

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 7b78c2bada81..e45bba240cbc 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1538,17 +1538,20 @@  static netdev_features_t bond_fix_features(struct net_device *dev,
 				 NETIF_F_HIGHDMA | NETIF_F_LRO)
 
 #define BOND_ENC_FEATURES	(NETIF_F_HW_CSUM | NETIF_F_SG | \
-				 NETIF_F_RXCSUM | NETIF_F_GSO_SOFTWARE)
+				 NETIF_F_RXCSUM | NETIF_F_GSO_SOFTWARE | \
+				 NETIF_F_GSO_PARTIAL)
 
 #define BOND_MPLS_FEATURES	(NETIF_F_HW_CSUM | NETIF_F_SG | \
 				 NETIF_F_GSO_SOFTWARE)
 
+#define BOND_GSO_PARTIAL_FEATURES (NETIF_F_GSO_ESP)
+
 
 static void bond_compute_features(struct bonding *bond)
 {
+	netdev_features_t gso_partial_features = BOND_GSO_PARTIAL_FEATURES;
 	unsigned int dst_release_flag = IFF_XMIT_DST_RELEASE |
 					IFF_XMIT_DST_RELEASE_PERM;
-	netdev_features_t gso_partial_features = NETIF_F_GSO_ESP;
 	netdev_features_t vlan_features = BOND_VLAN_FEATURES;
 	netdev_features_t enc_features  = BOND_ENC_FEATURES;
 #ifdef CONFIG_XFRM_OFFLOAD
@@ -1582,8 +1585,9 @@  static void bond_compute_features(struct bonding *bond)
 							  BOND_XFRM_FEATURES);
 #endif /* CONFIG_XFRM_OFFLOAD */
 
-		if (slave->dev->hw_enc_features & NETIF_F_GSO_PARTIAL)
-			gso_partial_features &= slave->dev->gso_partial_features;
+		gso_partial_features = netdev_increment_features(gso_partial_features,
+								 slave->dev->gso_partial_features,
+								 BOND_GSO_PARTIAL_FEATURES);
 
 		mpls_features = netdev_increment_features(mpls_features,
 							  slave->dev->mpls_features,
@@ -1598,12 +1602,8 @@  static void bond_compute_features(struct bonding *bond)
 	}
 	bond_dev->hard_header_len = max_hard_header_len;
 
-	if (gso_partial_features & NETIF_F_GSO_ESP)
-		bond_dev->gso_partial_features |= NETIF_F_GSO_ESP;
-	else
-		bond_dev->gso_partial_features &= ~NETIF_F_GSO_ESP;
-
 done:
+	bond_dev->gso_partial_features = gso_partial_features;
 	bond_dev->vlan_features = vlan_features;
 	bond_dev->hw_enc_features = enc_features | NETIF_F_GSO_ENCAP_ALL |
 				    NETIF_F_HW_VLAN_CTAG_TX |
@@ -6046,6 +6046,7 @@  void bond_setup(struct net_device *bond_dev)
 	bond_dev->hw_features |= NETIF_F_GSO_ENCAP_ALL;
 	bond_dev->features |= bond_dev->hw_features;
 	bond_dev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_STAG_TX;
+	bond_dev->features |= NETIF_F_GSO_PARTIAL;
 #ifdef CONFIG_XFRM_OFFLOAD
 	bond_dev->hw_features |= BOND_XFRM_FEATURES;
 	/* Only enable XFRM features if this is an active-backup config */