diff mbox series

[2/2] drm/msm/dsi/phy: Use the header with clock IDs

Message ID 20250127132105.107138-2-krzysztof.kozlowski@linaro.org (mailing list archive)
State Not Applicable
Headers show
Series [1/2] dt-bindings: display/msm/dsi-phy: Add header with exposed clock IDs | expand

Commit Message

Krzysztof Kozlowski Jan. 27, 2025, 1:21 p.m. UTC
Use the header with clock IDs to bind the interface between driver and
DTS.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.h           | 5 ++---
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c      | 1 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c      | 1 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c      | 1 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c | 1 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c       | 1 +
 6 files changed, 7 insertions(+), 3 deletions(-)

Comments

Dmitry Baryshkov Jan. 27, 2025, 1:54 p.m. UTC | #1
On Mon, Jan 27, 2025 at 02:21:05PM +0100, Krzysztof Kozlowski wrote:
> Use the header with clock IDs to bind the interface between driver and
> DTS.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  drivers/gpu/drm/msm/dsi/phy/dsi_phy.h           | 5 ++---
>  drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c      | 1 +
>  drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c      | 1 +
>  drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c      | 1 +
>  drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c | 1 +
>  drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c       | 1 +
>  6 files changed, 7 insertions(+), 3 deletions(-)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Stephen Boyd Jan. 27, 2025, 10:52 p.m. UTC | #2
Quoting Krzysztof Kozlowski (2025-01-27 05:21:05)
> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
> index fdb6c648e16f..7541ffde6521 100644
> --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
> +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
> @@ -6,6 +6,7 @@
>  #ifndef __DSI_PHY_H__
>  #define __DSI_PHY_H__
>  
> +#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>

It doesn't matter but I think most folks prefer putting the dt-bindings
after linux includes.

>  #include <linux/clk-provider.h>
>  #include <linux/delay.h>
>  #include <linux/regulator/consumer.h>
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
index fdb6c648e16f..7541ffde6521 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
@@ -6,6 +6,7 @@ 
 #ifndef __DSI_PHY_H__
 #define __DSI_PHY_H__
 
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <linux/clk-provider.h>
 #include <linux/delay.h>
 #include <linux/regulator/consumer.h>
@@ -85,9 +86,7 @@  struct msm_dsi_dphy_timing {
 	u8 hs_halfbyte_en_ckln;
 };
 
-#define DSI_BYTE_PLL_CLK		0
-#define DSI_PIXEL_PLL_CLK		1
-#define NUM_PROVIDED_CLKS		2
+#define NUM_PROVIDED_CLKS		(DSI_PIXEL_PLL_CLK + 1)
 
 #define DSI_LANE_MAX			5
 
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
index 677c62571811..9812b4d69197 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
@@ -3,6 +3,7 @@ 
  * Copyright (c) 2018, The Linux Foundation
  */
 
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/iopoll.h>
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
index 2c3cbe0f2870..3a1c8ece6657 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
@@ -3,6 +3,7 @@ 
  * Copyright (c) 2016, The Linux Foundation. All rights reserved.
  */
 
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/delay.h>
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
index 1383e3a4e050..90348a2af3e9 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
@@ -3,6 +3,7 @@ 
  * Copyright (c) 2015, The Linux Foundation. All rights reserved.
  */
 
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
 
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
index 5311ab7f3c70..f3643320ff2f 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
@@ -3,6 +3,7 @@ 
  * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
  */
 
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <linux/clk-provider.h>
 #include <linux/delay.h>
 
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
index ed8192d56b06..305042c29b2b 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
@@ -3,6 +3,7 @@ 
  * Copyright (c) 2018, The Linux Foundation
  */
 
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/iopoll.h>