diff mbox series

[v2] ARM: dts: imx53-ppd: Fix touchscreen reset-gpios

Message ID 20250109000710.45574-1-festevam@gmail.com (mailing list archive)
State New, archived
Headers show
Series [v2] ARM: dts: imx53-ppd: Fix touchscreen reset-gpios | expand

Commit Message

Fabio Estevam Jan. 9, 2025, 12:07 a.m. UTC 
From: Fabio Estevam <festevam@denx.de>

According to atmel,maxtouch.yaml, the correct property that describes
the GPIO connected to the touchscreen reset line is 'reset-gpios'.

Change it accordingly to fix the following dt-schema warning:

'reset-gpio' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Fabio Estevam <festevam@denx.de>
---
Changes since v1:
- Fix Subject.

 arch/arm/boot/dts/nxp/imx/imx53-ppd.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Shawn Guo Feb. 18, 2025, 6:22 a.m. UTC | #1 
On Wed, Jan 08, 2025 at 09:07:10PM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <festevam@denx.de>
> 
> According to atmel,maxtouch.yaml, the correct property that describes
> the GPIO connected to the touchscreen reset line is 'reset-gpios'.
> 
> Change it accordingly to fix the following dt-schema warning:
> 
> 'reset-gpio' does not match any of the regexes: 'pinctrl-[0-9]+'
> 
> Signed-off-by: Fabio Estevam <festevam@denx.de>

Applied, thanks!
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts b/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts
index e939acc1c88b..2892e457fea7 100644
--- a/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts
@@ -593,7 +593,7 @@  &i2c2 {
 
 	touchscreen@4b {
 		compatible = "atmel,maxtouch";
-		reset-gpio = <&gpio5 19 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>;
 		reg = <0x4b>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;