diff mbox series

[v6,3/5] arm64: dts: rockchip: Add Orange Pi 5 Ultra board

Message ID 20250222172752.6254-4-honyuenkwun@gmail.com (mailing list archive)
State New
Headers show
Series Orange Pi 5 Ultra | expand

Commit Message

Jimmy Hon Feb. 22, 2025, 5:27 p.m. UTC 
The RK3588 Single Board Computer includes
- eMMC
- microSD
- UART
- 2 PWM LEDs
- RTC
- RTL8125 network controller on PCIe 2.0x1.
- M.2 M-key connector routed to PCIe 3.0x4
- PWM controlled heat sink fan.
- 2 USB2 ports
- lower USB3 port
- upper USB3 port with OTG capability
- Mali GPU
- SPI NOR flash
- Mask Rom button
- Analog audio using es8388 codec via the headset jack and onboard mic
- HDMI1
- HDMI IN

the vcc5v0_usb30 regulator shares the same enable gpio pin as the
vcc5v0_usb20 regulator.

The Orange Pi 5 Ultra is a single board computer powered by the Rockchip
RK3588 with similar board layout as the 5 Max but with the HDMI0 swapped
for HDMI IN.

Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
---
 arch/arm64/boot/dts/rockchip/Makefile         |  1 +
 .../dts/rockchip/rk3588-orangepi-5-ultra.dts  | 33 +++++++++++++++++++
 2 files changed, 34 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts

Comments

Johannes Erdfelt Feb. 22, 2025, 7:02 p.m. UTC | #1 
On Sat, Feb 22, 2025, Jimmy Hon <honyuenkwun@gmail.com> wrote:
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts
> new file mode 100644
> index 000000000000..fa975c5db0ae
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts
> @@ -0,0 +1,33 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/pinctrl/rockchip.h>
> +#include "rk3588-orangepi-5-compact.dtsi"
> +
> +/ {
> +	model = "Xunlong Orange Pi 5 Ultra";
> +	compatible = "xunlong,orangepi-5-ultra", "rockchip,rk3588";
> +};
> +
> +&led_blue_pwm {
> +	pwms = <&pwm4 0 25000 PWM_POLARITY_INVERTED>;
> +};
> +
> +&led_green_pwm {
> +	pwms = <&pwm5 0 25000 PWM_POLARITY_INVERTED>;
> +};
> +
> +&pinctrl {
> +
> +	usb {
> +		usb_otg_pwren: usb-otg-pwren {
> +			rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +};
> +
> +&vcc5v0_usb30_otg {
> +	gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
> +};

Error: arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts:58.24-25
syntax error
FATAL ERROR: Unable to parse input tree

I think you may need to include <dt-bindings/pwm/pwm.h>

JE
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 57c5c013cc08..d068b9018cf4 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -151,6 +151,7 @@  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6-lts.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-ok3588-c.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-max.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-ultra.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5-itx.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts
new file mode 100644
index 000000000000..fa975c5db0ae
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts
@@ -0,0 +1,33 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3588-orangepi-5-compact.dtsi"
+
+/ {
+	model = "Xunlong Orange Pi 5 Ultra";
+	compatible = "xunlong,orangepi-5-ultra", "rockchip,rk3588";
+};
+
+&led_blue_pwm {
+	pwms = <&pwm4 0 25000 PWM_POLARITY_INVERTED>;
+};
+
+&led_green_pwm {
+	pwms = <&pwm5 0 25000 PWM_POLARITY_INVERTED>;
+};
+
+&pinctrl {
+
+	usb {
+		usb_otg_pwren: usb-otg-pwren {
+			rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&vcc5v0_usb30_otg {
+	gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
+};