diff mbox series

[net-next,v3,3/3] ieee802154: ca8210: Switch to using gpiod API

Message ID 20250304112418.1774869-4-andriy.shevchenko@linux.intel.com (mailing list archive)
State New
Delegated to: Netdev Maintainers
Headers show
Series ieee802154: ca8210: Sparse fix and GPIOd conversion | expand

Checks

Context Check Description
netdev/series_format success Posting correctly formatted
netdev/tree_selection success Clearly marked for net-next
netdev/ynl success Generated files up to date; no warnings/errors; no diff in generated;
netdev/fixes_present success Fixes tag not required for -next series
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/build_tools success No tools touched, skip
netdev/cc_maintainers success CCed 17 of 17 maintainers
netdev/build_clang success Errors and warnings before: 0 this patch: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/deprecated_api success None detected
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/checkpatch warning WARNING: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst
netdev/build_clang_rust success No Rust files in patch. Skipping build
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0
netdev/contest fail net-next-2025-03-04--15-00 (tests: 894)

Commit Message

Andy Shevchenko March 4, 2025, 11:22 a.m. UTC 
This updates the driver to gpiod API, and removes yet another use of
of_get_named_gpio().

With this, invert the logic of the reset pin which is active low
and add a quirk for the legacy and incorrect device tree descriptions.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 .../bindings/net/ieee802154/ca8210.txt        |  2 +-
 drivers/gpio/gpiolib-of.c                     |  9 +++
 drivers/net/ieee802154/ca8210.c               | 57 +++++++------------
 3 files changed, 29 insertions(+), 39 deletions(-)

Comments

Miquel Raynal March 4, 2025, 1:50 p.m. UTC | #1 
On 04/03/2025 at 13:22:34 +02, Andy Shevchenko <andriy.shevchenko@linux.intel.com> wrote:

> This updates the driver to gpiod API, and removes yet another use of
> of_get_named_gpio().
>
> With this, invert the logic of the reset pin which is active low
> and add a quirk for the legacy and incorrect device tree descriptions.
>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Nice.

Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

Thanks,
Miquèl
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/ieee802154/ca8210.txt b/Documentation/devicetree/bindings/net/ieee802154/ca8210.txt
index a1046e636fa1..f1bd07a0097d 100644
--- a/Documentation/devicetree/bindings/net/ieee802154/ca8210.txt
+++ b/Documentation/devicetree/bindings/net/ieee802154/ca8210.txt
@@ -20,7 +20,7 @@  Example:
 		reg = <0>;
 		spi-max-frequency = <3000000>;
 		spi-cpol;
-		reset-gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		reset-gpio = <&gpio1 1 GPIO_ACTIVE_LOW>;
 		irq-gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 		extclock-enable;
 		extclock-freq = 16000000;
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index df351b1d6628..54e916d4c03e 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -203,6 +203,15 @@  static void of_gpio_try_fixup_polarity(const struct device_node *np,
 		 */
 		{ "qi,lb60",		"rb-gpios",	true },
 #endif
+#if IS_ENABLED(CONFIG_IEEE802154_CA8210)
+		/*
+		 * According to the datasheet, the NRST pin 27 is an active-low
+		 * signal. However, the device tree schema and admittedly
+		 * the out-of-tree implementations have been used for a long
+		 * time incorrectly by describing reset GPIO as active-high.
+		 */
+		{ "cascoda,ca8210",	"reset-gpio",	false },
+#endif
 #if IS_ENABLED(CONFIG_PCI_LANTIQ)
 		/*
 		 * According to the PCI specification, the RST# pin is an
diff --git a/drivers/net/ieee802154/ca8210.c b/drivers/net/ieee802154/ca8210.c
index 65f042c8734b..ebc4f1b18e7b 100644
--- a/drivers/net/ieee802154/ca8210.c
+++ b/drivers/net/ieee802154/ca8210.c
@@ -52,12 +52,10 @@ 
 #include <linux/debugfs.h>
 #include <linux/delay.h>
 #include <linux/gpio/consumer.h>
-#include <linux/gpio.h>
 #include <linux/ieee802154.h>
 #include <linux/io.h>
 #include <linux/kfifo.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/poll.h>
@@ -350,8 +348,8 @@  struct work_priv_container {
  * @extclockenable: true if the external clock is to be enabled
  * @extclockfreq:   frequency of the external clock
  * @extclockgpio:   ca8210 output gpio of the external clock
- * @gpio_reset:     gpio number of ca8210 reset line
- * @gpio_irq:       gpio number of ca8210 interrupt line
+ * @reset_gpio:     ca8210 reset GPIO descriptor
+ * @irq_gpio:       ca8210 interrupt GPIO descriptor
  * @irq_id:         identifier for the ca8210 irq
  *
  */
@@ -359,8 +357,8 @@  struct ca8210_platform_data {
 	bool extclockenable;
 	unsigned int extclockfreq;
 	unsigned int extclockgpio;
-	int gpio_reset;
-	int gpio_irq;
+	struct gpio_desc *reset_gpio;
+	struct gpio_desc *irq_gpio;
 	int irq_id;
 };
 
@@ -632,10 +630,10 @@  static void ca8210_reset_send(struct spi_device *spi, unsigned int ms)
 	struct ca8210_priv *priv = spi_get_drvdata(spi);
 	long status;
 
-	gpio_set_value(pdata->gpio_reset, 0);
+	gpiod_set_value(pdata->reset_gpio, 1);
 	reinit_completion(&priv->ca8210_is_awake);
 	msleep(ms);
-	gpio_set_value(pdata->gpio_reset, 1);
+	gpiod_set_value(pdata->reset_gpio, 0);
 	priv->promiscuous = false;
 
 	/* Wait until wakeup indication seen */
@@ -2788,24 +2786,14 @@  static int ca8210_reset_init(struct spi_device *spi)
 {
 	struct device *dev = &spi->dev;
 	struct ca8210_platform_data *pdata = dev_get_platdata(dev);
-	int ret;
 
-	pdata->gpio_reset = of_get_named_gpio(
-		spi->dev.of_node,
-		"reset-gpio",
-		0
-	);
-
-	ret = gpio_direction_output(pdata->gpio_reset, 1);
-	if (ret < 0) {
-		dev_crit(
-			&spi->dev,
-			"Reset GPIO %d did not set to output mode\n",
-			pdata->gpio_reset
-		);
+	pdata->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(pdata->reset_gpio)) {
+		dev_crit(dev, "Reset GPIO did not set to output mode\n");
+		return PTR_ERR(pdata->reset_gpio);
 	}
 
-	return ret;
+	return 0;
 }
 
 /**
@@ -2820,20 +2808,15 @@  static int ca8210_interrupt_init(struct spi_device *spi)
 	struct ca8210_platform_data *pdata = dev_get_platdata(dev);
 	int ret;
 
-	pdata->gpio_irq = of_get_named_gpio(
-		spi->dev.of_node,
-		"irq-gpio",
-		0
-	);
+	pdata->irq_gpio = devm_gpiod_get(dev, "irq", GPIOD_IN);
+	if (IS_ERR(pdata->irq_gpio)) {
+		dev_crit(dev, "Could not retrieve IRQ GPIO\n");
+		return PTR_ERR(pdata->irq_gpio);
+	}
 
-	pdata->irq_id = gpio_to_irq(pdata->gpio_irq);
+	pdata->irq_id = gpiod_to_irq(pdata->irq_gpio);
 	if (pdata->irq_id < 0) {
-		dev_crit(
-			&spi->dev,
-			"Could not get irq for gpio pin %d\n",
-			pdata->gpio_irq
-		);
-		gpio_free(pdata->gpio_irq);
+		dev_crit(dev, "Could not get irq for IRQ GPIO\n");
 		return pdata->irq_id;
 	}
 
@@ -2844,10 +2827,8 @@  static int ca8210_interrupt_init(struct spi_device *spi)
 		"ca8210-irq",
 		spi_get_drvdata(spi)
 	);
-	if (ret) {
+	if (ret)
 		dev_crit(&spi->dev, "request_irq %d failed\n", pdata->irq_id);
-		gpio_free(pdata->gpio_irq);
-	}
 
 	return ret;
 }