| Message ID | 20250313194801.16035f96@jic23-huawei (mailing list archive) |
|---|---|
| State | Handled Elsewhere |
| Headers | show |
| Series | [PULL] IIO: New device support, features and cleanup for 6.15 | expand |
On Thu, Mar 13, 2025 at 07:48:01PM +0000, Jonathan Cameron wrote: > The following changes since commit 2014c95afecee3e76ca4a56956a936e23283f05b: > > Linux 6.14-rc1 (2025-02-02 15:39:26 -0800) > > are available in the Git repository at: > > https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-6.15a Pulled and pushed out, thanks. greg k-h
The following changes since commit 2014c95afecee3e76ca4a56956a936e23283f05b: Linux 6.14-rc1 (2025-02-02 15:39:26 -0800) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-6.15a for you to fetch changes up to 8dbeb413806f9f810d97d25284f585b201aa3bdc: doc: iio: ad7380: describe offload support (2025-03-11 19:09:17 +0000) ---------------------------------------------------------------- IIO: New device support, features and cleanup for the 6.15 cycle. The usual mixture of new drivers, support in existing drivers for new devices, a range of features and general subsystem cleanup. Two merges of immutable branches in here: * SPI offload support. Culmination of a long effort to bring the ability to offload triggered sequences of SPI operations to specific hardware, allow high datarate acquisition over an SPI bus (if you have the right hardware / FPGA firmware) * GPIO set-array-helper - enables code simplification. New device support ================== adi,ad3552r-hs: - Add support for AD3541r and AD3542r via newly supported FPGA HDL. adi,ad4030 - New driver supporting the AD4030, AD4630 AD4630-16, AD4640-24, AD4632-16, AD4632-24 1 and 2 channel high precision SPI ADCs. adi,ad4851 - New driver and backend support for the AD4851, AD4852, AD4853, AD4854, AD4855, AD4846, AD4857, AD4858 and AD4858I high speed multichannel simultaneous sampling ADCs. adi,ad7191 - New driver for this 24-bit ADC for precision bridge applications, adi,ad7380 - Add support for the adaq4381-4 which is a 14-bit version of the already supported adaq4380-1 adi,adis16550 - New driver using the ADIS library (which needed extensions) for this IMU. brcm,apds9160 - New driver for this proximity and ambient light sensor. dynaimage,al3000a - New driver for this illuminance sensor. mcube,mc3230 - Add support for the mc3510c accelerometer with a different scale to existing supported parts (some rework preceded this) nxp,imx93 - Add compatibles for imx94 and imx95 which are fully compatible with imx93. rockchip,saradc - Add support for the RK3528 ADC - Add support for the RK3562 ADC silab,si7210 - New driver to support this I2C Hall effect magnetic position sensor. ti,ads7138 - New driver supporting the ADS7128 and AD7138 I2C ADCs. Staging driver drop =================== adi,adis16240 - Drop this impact sensor. Interesting part but complex hence never left staging due to ABI challenges. No longer readily available so drop driver. New features ============ Documentation - A really nice overview document introduce ADC terminology and how it maps to IIO. core - New description for FAULT events, used in the ad7173. - filter_type ABI used in ad4130. buffer-dmaengine - Split DMA channel request from buffer allocation (for SPI offload) - Add a new _with_handle setup variant. (for SPI offload) adi,adf4371 - Add control of reference clock type and support for frequency doubling where appropriate. adi,ad4695 - Support SPI offload. - Support oversampling control. adi,ad5791 - Support SPI offload. adi,ad7124 - Add channel calibration support. adi,ad7380: - Alert support (threshold interrupts) - SPI offload support. adi,ad7606 - Support writing registers when using backend enabling software control of modes. adi,ad7944 - Support SPI offload. adi,ad9832 - Use devm_regulator_get_enable() to simplify code. adi,ad9834 - Use devm_regulator_get_enable() to simplify code. adi,adxl345 - Improve IRQ handling code. - Add debug access to registers. bosch,bmi270 - Add temperature channel support. - Add data ready trigger. google,cross_ec - Add trace events. mcube,mc3230 - Add mount matrix support - Add an OF match table. Cleanup and minor bug fixes =========================== Tree wide: - Stop using iio_device_claim_direct_scoped() and introduce sparse friendly iio_device_claim/release_direct() The conditional scoped cleanup has proved hard to deal with, requiring workarounds for various compiler issues and in is rather non-intuitive so abandon that experiment. One of the attractions of that approach was that it made it much harder to have unbalanced claim/release bugs so instead introduce a conditional-lock style boolean returning new pair of functions. These are inline in the header and have __acquire and __release calls allowing sparse to detect lack of balance. There are occasional false positives but so far those have reflected complex code paths that benefited from cleanup anyway. The first set of driver conversions are in this pull request, more to follow next cycle. Various related cleanup in drivers. Removal of the _scoped code is completed and the definition removed. - Use of str_enable_disable() and similar helpers. - Don't set regmap cache to REGCACHE_NONE as that's the default anyway. - Change some caches from RBTREE to MAPLE reflecting best practice. - Use the new gpiod_multi_set_value_cansleep() - Make sure to grab direct mode for some calibrations paths. - Avoid using memcmp on structures when checking for matching channel configs. Instead just match field by field. dt-bindings: - Fix up indentation inconsistencies. gts-helper: - Simplify building of available scale table. adi,ad-sigma-delta - Make sure to disable channel after calibration done. - Add error handling in configuring channel during calibration. adi,ad2s1201 - use a bitmap_write() rather than directly accessing underlying storage. adi,ad3552r-hs - Fix a wrong error message. - Make sure to use instruction mode for configuration. adi,ad4695 - Add a conversion to ensure exit from conversion mode. - Use custom regmap to handle required sclk rate change. - Fix an out of bounds array access - Simplify oversampling ratio handling. adi,ad4851 - Fix a sign bug. adi,ad5791 - Fix wrong exported number of storage bits. adi,ad7124 - Disable all channels at probe to avoid strange initial configurations. adi,ad7173 - Rework to allow static const struct ad_sigma_delta without need to make a copy. adi,ad7623 - Drop a BSD license tag that the authors consider unnecessary. adi,ad7768-1 - Fix channels sign description exposed to user space. - Set MOSI idle state to avoid accidental device reset. - Avoid some overkill locking. adi,axi-dac - Check if device interface is busy when enabling data stream. - Add control of bus mode. bosch,bmi270 - Move a struct definition to a c file as only used there. vishay,veml6030 - Enable regmap cache to reduce bus traffic. - Fix ABI bug around scale reporting. vishay,vem6075 - Check array bounds to harden against broken hardware. Various other minor tweaks and fixes not called out. * ---------------------------------------------------------------- Alisa-Dariana Roman (3): dt-bindings: iio: adc: add AD7191 iio: adc: ad7191: add AD7191 docs: iio: add AD7191 Andy Shevchenko (3): iio: light: adux1020: Drop unneeded assignment for cache_type iio: magnetometer: af8133j: Drop unneeded assignment for cache_type iio: pressure: zpa2326: Drop unneeded assignment for cache_type Angelo Dureghello (13): iio: dac: adi-axi-dac: modify stream enable iio: dac: adi-axi-dac: add bus mode setup iio: dac: ad3552r-hs: fix message on wrong chip id iio: dac: ad3552r-hs: use instruction mode for configuration iio: dac: ad3552r: share model data structures iio: dac: ad3552r-hs: add ad3541/2r support iio: dac: ad3552r-hs: update function name (non functional) iio: adc: adi-axi-adc: add struct axi_adc_info iio: adc: adi-axi-adc: add platform children support iio: adc: ad7606: protect register access iio: dac: adi-axi-dac: add io_mode check iio: ad7380: add support for SPI offload doc: iio: ad7380: describe offload support Antoni Pokusinski (2): dt-bindings: iio: magnetometer: add binding for Si7210 iio: magnetometer: si7210: add driver for Si7210 Antoniu Miclaus (12): dt-bindings: iio: adf4371: add refin mode iio: frequency: adf4371: add refin mode iio: frequency: adf4371: add ref doubler iio: backend: add API for interface get iio: backend: add support for data size set iio: backend: add API for oversampling iio: adc: adi-axi-adc: add interface type dt-bindings: iio: adc: add ad485x axi variant iio: adc: adi-axi-adc: set data format iio: adc: adi-axi-adc: add oversampling dt-bindings: iio: adc: add ad4851 iio: adc: ad4851: add ad485x driver Axel Haslam (1): iio: dac: ad5791: Add offload support Bo Liu (4): iio: accel: msa311: convert to use maple tree register cache iio: accel: bma400: convert to use maple tree register cache iio: accel: bmi088: convert to use maple tree register cache iio: accel: kx022a: convert to use maple tree register cache Colin Ian King (1): iio: light: Fix spelling mistake "regist" -> "register" Dan Carpenter (2): iio: adc: ad4851: Fix signedness bug in ad4851_calibrate() iio: adc: ad4030: fix error pointer dereference in probe() David Lechner (25): iio: adc: ad7173: move fwnode_irq_get_byname() call site iio: adc: ad7173: don't make copy of ad_sigma_delta_info struct spi: add basic support for SPI offloading spi: offload: add support for hardware triggers dt-bindings: trigger-source: add generic PWM trigger source spi: offload-trigger: add PWM trigger driver spi: add offload TX/RX streaming APIs iio: dac: ad5791: fix storage iio: buffer-dmaengine: split requesting DMA channel from allocating buffer iio: buffer-dmaengine: add devm_iio_dmaengine_buffer_setup_with_handle() iio: adc: ad7944: don't use storagebits for sizing iio: adc: ad7944: add support for SPI offload doc: iio: ad7944: describe offload support dt-bindings: iio: adc: adi,ad4695: add SPI offload properties iio: adc: ad4695: Add support for SPI offload doc: iio: ad4695: add SPI offload support iio: dac: ad5791: sort include directives gpiolib: add gpiod_multi_set_value_cansleep() iio: adc: ad7606: use gpiod_multi_set_value_cansleep iio: amplifiers: hmc425a: use gpiod_multi_set_value_cansleep iio: resolver: ad2s1210: use gpiod_multi_set_value_cansleep iio: resolver: ad2s1210: use bitmap_write iio: adc: ad4695: fix out of bounds array access iio: adc: ad4695: simplify getting oversampling_ratio MAINTAINERS: remove adi,ad7606.yaml from SEPS525 Esteban Blanc (6): dt-bindings: iio: adc: add ADI ad4030, ad4630 and ad4632 iio: adc: ad4030: add driver for ad4030-24 iio: adc: ad4030: add averaging support iio: adc: ad4030: add support for ad4630-24 and ad4630-16 iio: adc: ad4030: add support for ad4632-16 and ad4632-24 docs: iio: ad4030: add documentation Fabio Estevam (1): iio: adc: ti-ads124s08: Switch to fsleep() Folker Schwesinger (1): iio: buffer-dma: Fix docstrings Frank Li (1): dt-bindings: iio: adc: Add i.MX94 and i.MX95 support Guillaume Ranquet (2): iio: introduce the FAULT event type iio: adc: ad7173: add openwire detection support for single conversions Guillaume Stols (6): dt-bindings: iio: dac: adi-axi-adc: add ad7606 variant iio: adc: ad7606: move the software mode configuration iio: adc: ad7606: move software functions into common file iio: adc: adi-axi-adc: add support for AD7606 register writing iio: adc: ad7606: change channel macros parameters iio: adc: ad7606: add support for writing registers when using backend Gustavo Silva (4): iio: imu: bmi270: add temperature channel iio: imu: bmi270: move private struct declaration to source file iio: imu: bmi270: rename variable bmi270_device to data iio: imu: bmi270: add support for data ready interrupt trigger Gwendal Grignou (1): iio: cros_ec: Trace EC sensors command Javier Carrasco (4): iio: light: veml6030: extend regmap to support regfields iio: light: veml6030: extend regmap to support caching iio: gts-helper: export iio_gts_get_total_gain() iio: light: veml6030: fix scale to conform to ABI Jonas Karlman (2): dt-bindings: iio: adc: Add rockchip,rk3528-saradc variant iio: adc: rockchip_saradc: Add support for RK3528 Jonathan Cameron (59): Merge tag 'spi-offload' into togreg iio: core: Rework claim and release of direct mode to work with sparse. iio: chemical: scd30: Use guard(mutex) to allow early returns iio: chemical: scd30: Switch to sparse friendly claim/release_direct() iio: temperature: tmp006: Stop using iio_device_claim_direct_scoped() iio: proximity: sx9310: Stop using iio_device_claim_direct_scoped() iio: proximity: sx9324: Stop using iio_device_claim_direct_scoped() iio: proximity: sx9360: Stop using iio_device_claim_direct_scoped() iio: accel: adxl367: Stop using iio_device_claim_direct_scoped() iio: adc: ad4000: Stop using iio_device_claim_direct_scoped() iio: adc: ad4130: Stop using iio_device_claim_direct_scoped() iio: adc: ad4695: Stop using iio_device_claim_direct_scoped() iio: adc: ad7606: Stop using iio_device_claim_direct_scoped() iio: adc: ad7625: Stop using iio_device_claim_direct_scoped() iio: adc: ad7779: Stop using iio_device_claim_direct_scoped() iio: adc: ad9467: Stop using iio_device_claim_direct_scoped() iio: adc: max1363: Stop using iio_device_claim_direct_scoped() iio: adc: rtq6056: Stop using iio_device_claim_direct_scoped() iio: adc: ti-adc161s626: Stop using iio_device_claim_direct_scoped() iio: adc: ti-ads1119: Stop using iio_device_claim_direct_scoped() iio: addac: ad74413r: Stop using iio_device_claim_direct_scoped() iio: chemical: ens160: Stop using iio_device_claim_direct_scoped() iio: dac: ad3552r-hs: Stop using iio_device_claim_direct_scoped() iio: dac: ad8460: Stop using iio_device_claim_direct_scoped() iio: dummy: Stop using iio_device_claim_direct_scoped() iio: imu: bmi323: Stop using iio_device_claim_direct_scoped() iio: light: bh1745: Stop using iio_device_claim_direct_scoped() iio: Drop iio_device_claim_direct_scoped() and related infrastructure Merge tag 'gpio-set-array-helper-v6.15-rc1' into togreg iio: accel: mma8452: Ensure error return on failure to matching oversampling ratio iio: accel: mma8452: Factor out guts of write_raw() to simplify locking iio: accel: mma8452: Switch to sparse friendly iio_device_claim/release_direct() iio: accel: kx022a: Factor out guts of write_raw() to allow direct returns iio: accel: kx022a: Switch to sparse friendly iio_device_claim/release_direct() iio: accel: msa311: Fix failure to release runtime pm if direct mode claim fails. iio: accel: msa311: Switch to sparse friendly iio_device_claim/release_direct() iio: accel: Switch to sparse friendly iio_device_claim/release_direct() iio: adc: stm32-dfsdm: Factor out core of reading INFO_RAW iio: adc: stm32-dfsdm: Switch to sparse friendly iio_device_claim/release_direct() iio: adc: ad4030: Switch to sparse friendly iio_device_claim/release_direct() iio: adc: ad7192: Factor out core of ad7192_write_raw() to simplify error handling. iio: adc: ad7192: Switch to sparse friendly iio_device_claim/release_direct() iio: adc: ad7768-1: Move setting of val a bit later to avoid unnecessary return value check iio: adc: ad7768-1: Switch to sparse friendly iio_device_claim/release_direct() iio: adc: ad7606: Switch to sparse friendly iio_device_claim/release_direct() iio: adc: ad7791: Factor out core of ad7791_write_raw() to simplify error handling iio: adc: ad7791: Switch to sparse friendly iio_device_claim/release_direct() iio: adc: ad7793: Factor out core of ad7793_write_raw() to simplify error handling iio: adc: ad7793: Switch to sparse friendly iio_device_claim/release_direct() iio: adc: ad799x: Switch to sparse friendly iio_device_claim/release_direct() iio: adc: ad_sigma_delta: Switch to sparse friendly iio_device_claim/release_direct() iio: adc: at91-sama5d2: Move claim of direct mode up a level and use guard() iio: adc: at91-sama5d2: Switch to sparse friendly iio_device_claim/release_direct() iio: adc: max1027: Move claim of direct mode up one level and use guard() iio: adc: max1027: Switch to sparse friendly iio_device_claim/release_direct() iio: adc: max11410: Factor out writing of sampling frequency to simplify errro paths. iio: adc: max11410: Switch to sparse friendly iio_device_claim/release_direct() iio: adc: Switch to sparse friendly iio_device_claim/release_direct() staging: iio: accel: adis16240: Drop driver for this impact sensor Jonathan Santos (3): iio: adc: ad7768-1: set MOSI idle state to prevent accidental reset Documentation: ABI: add wideband filter type to sysfs-bus-iio iio: adc: ad7768-1: remove unnecessary locking Julien Stephan (8): iio: adc: ad7380: do not use iio_device_claim_direct_scoped anymore iio: adc: ad7380: enable regmap cache iio: adc: ad7380: do not store osr in private data structure iio: adc: ad7380: add alert support docs: iio: ad7380: add alert support iio: adc: ad7380: add adaq4381-4 support dt-bindings: iio: adc: ad7380: add adaq4381-4 compatible parts docs: iio: ad7380: add adaq4381-4 Jun Yan (2): iio: gyro: bmg160_i2c: add BMI088 to of_match_table iio: gyro: bmg160_spi: add of_match_table Karan Sanghavi (1): iio: light: Add check for array bounds in veml6075_read_int_time_ms Kever Yang (1): dt-bindings: iio: adc: Add rockchip,rk3562-saradc string Krzysztof Kozlowski (2): dt-bindings: iio: Correct indentation and style in DTS example iio: Use str_enable_disable-like helpers Lothar Rubusch (4): docs: iio: fix wrong driver name in documentation iio: accel: adxl345: reorganize measurement enable iio: accel: adxl345: add debug register access iio: accel: adxl345: reorganize irq handler Marcelo Schmitt (4): Documentation: ABI: IIO: Add filter_type documentation Documentation: ABI: IIO: Re-add sysfs-bus-iio-adc-ad4130 iio: adc: ad4130: Add filter_type attributes Documentation: iio: Add ADC documentation Matti Vaittinen (3): iio: gts: Simplify available scale table build iio: adc: Include cleanup.h when using guard() iio: adc: ti-ads7924 Drop unnecessary function parameters Mikael Gonella-Bolduc (2): dt-bindings: iio: light: Add APDS9160 binding iio: light: Add APDS9160 ALS & Proximity sensor driver Nuno Sá (3): iio: backend: make sure to NULL terminate stack buffer iio: core: make use of simple_write_to_buffer() iio: adc: adi-axi-adc: replace of.h with mod_devicetable.h Rob Herring (Arm) (1): iio: adc: stm32: Drop unnecessary DT property presence check Robert Budai (6): iio: imu: adis: Add custom ops struct iio: imu: adis: Add reset to custom ops iio: imu: adis: Add DIAG_STAT register dt-bindings: iio: Add adis16550 bindings iio: imu: adis16550: add adis16550 support docs: iio: add documentation for adis16550 driver Saalim Quadri (2): staging: iio: ad9832: Use devm_regulator_get_enable() staging: iio: ad9834: Use devm_regulator_get_enable() Sergiu Cuciurean (1): iio: adc: ad7768-1: Fix conversion result sign Simon Xue (1): iio: adc: rockchip_saradc: add rk3562 Svyatoslav Ryhel (2): dt-bindings: iio: light: al3010: add al3000a support iio: light: Add support for AL3000a illuminance sensor Tobias Sperling (2): dt-bindings: iio: adc: Introduce ADS7138 iio: adc: Add driver for ADS7128 / ADS7138 Trevor Gamblin (5): iio: adc: ad7625: drop BSD license tag iio: adc: ad4695: make ad4695_exit_conversion_mode() more robust iio: adc: ad4695: add custom regmap bus callbacks iio: adc: ad4695: add offload-based oversampling support doc: iio: ad4695: describe oversampling support Uwe Kleine-König (13): iio: adc: ad7124: Micro-optimize channel disabling iio: adc: ad7124: Really disable all channels at probe time iio: adc: ad7173: Grab direct mode for calibration iio: adc: ad7192: Grab direct mode for calibration iio: adc: ad_sigma_delta: Disable channel after calibration iio: adc: ad4130: Fix comparison of channel setups iio: adc: ad7124: Fix comparison of channel configs iio: adc: ad7173: Fix comparison of channel configs iio: adc: ad4130: Adapt internal names to match official filter_type ABI iio: adc: ad_sigma_delta: Add error checking for ad_sigma_delta_set_channel() iio: adc: ad7124: Implement internal calibration at probe time iio: adc: ad7124: Implement system calibration iio: adc: ad7124: Benefit of dev = indio_dev->dev.parent in ad7124_parse_channel_config() Vasiliy Doylov (5): dt-bindings: iio: accel: mc3230: document mc3510c iio: accel: mc3230: add mount matrix support iio: accel: mc3230: add OF match table iio: accel: mc3230: add multiple devices support iio: accel: mc3230: add mc3510c support sunliming (1): iio: imu: adis: fix uninitialized symbol warning Documentation/ABI/testing/sysfs-bus-iio | 12 +- Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130 | 20 + .../devicetree/bindings/iio/adc/adi,ad4030.yaml | 110 ++ .../devicetree/bindings/iio/adc/adi,ad4695.yaml | 13 + .../devicetree/bindings/iio/adc/adi,ad4851.yaml | 153 ++ .../devicetree/bindings/iio/adc/adi,ad7191.yaml | 149 ++ .../devicetree/bindings/iio/adc/adi,ad7380.yaml | 4 + .../devicetree/bindings/iio/adc/adi,axi-adc.yaml | 72 +- .../devicetree/bindings/iio/adc/nxp,imx93-adc.yaml | 9 +- .../bindings/iio/adc/rockchip-saradc.yaml | 2 + .../devicetree/bindings/iio/adc/ti,ads7138.yaml | 63 + .../devicetree/bindings/iio/dac/adi,ad5380.yaml | 18 +- .../devicetree/bindings/iio/frequency/adf4371.yaml | 5 +- .../bindings/iio/humidity/sciosense,ens210.yaml | 12 +- .../devicetree/bindings/iio/imu/adi,adis16550.yaml | 74 + .../bindings/iio/light/brcm,apds9160.yaml | 78 + .../bindings/iio/light/dynaimage,al3010.yaml | 6 +- .../bindings/iio/magnetometer/silabs,si7210.yaml | 48 + .../bindings/iio/temperature/maxim,max31865.yaml | 20 +- .../bindings/iio/temperature/ti,tmp117.yaml | 6 +- .../bindings/trigger-source/pwm-trigger.yaml | 37 + .../devicetree/bindings/trivial-devices.yaml | 2 + Documentation/iio/ad4030.rst | 180 +++ Documentation/iio/ad4695.rst | 104 +- Documentation/iio/ad7191.rst | 119 ++ Documentation/iio/ad7380.rst | 56 +- Documentation/iio/ad7944.rst | 24 +- Documentation/iio/adis16550.rst | 376 +++++ Documentation/iio/adxl380.rst | 2 +- Documentation/iio/iio_adc.rst | 305 ++++ Documentation/iio/index.rst | 4 + MAINTAINERS | 51 +- drivers/iio/accel/adxl345.h | 1 - drivers/iio/accel/adxl345_core.c | 78 +- drivers/iio/accel/adxl367.c | 194 +-- drivers/iio/accel/adxl372.c | 7 +- drivers/iio/accel/adxl380.c | 7 +- drivers/iio/accel/bma180.c | 7 +- drivers/iio/accel/bma400_core.c | 2 +- drivers/iio/accel/bmi088-accel-core.c | 9 +- drivers/iio/accel/fxls8962af-core.c | 21 +- drivers/iio/accel/kionix-kx022a.c | 78 +- drivers/iio/accel/mc3230.c | 95 +- drivers/iio/accel/mma8452.c | 86 +- drivers/iio/accel/msa311.c | 34 +- drivers/iio/adc/Kconfig | 56 +- drivers/iio/adc/Makefile | 4 + drivers/iio/adc/ad4000.c | 60 +- drivers/iio/adc/ad4030.c | 1230 +++++++++++++++ drivers/iio/adc/ad4130.c | 139 +- drivers/iio/adc/ad4695.c | 1094 ++++++++++++-- drivers/iio/adc/ad4851.c | 1315 ++++++++++++++++ drivers/iio/adc/ad7091r-base.c | 1 + drivers/iio/adc/ad7124.c | 343 ++++- drivers/iio/adc/ad7173.c | 791 ++++++---- drivers/iio/adc/ad7191.c | 554 +++++++ drivers/iio/adc/ad7192.c | 124 +- drivers/iio/adc/ad7266.c | 7 +- drivers/iio/adc/ad7298.c | 7 +- drivers/iio/adc/ad7380.c | 917 +++++++++-- drivers/iio/adc/ad7476.c | 7 +- drivers/iio/adc/ad7606.c | 174 ++- drivers/iio/adc/ad7606.h | 103 +- drivers/iio/adc/ad7606_bus_iface.h | 16 + drivers/iio/adc/ad7606_par.c | 52 +- drivers/iio/adc/ad7606_spi.c | 137 +- drivers/iio/adc/ad7625.c | 13 +- drivers/iio/adc/ad7768-1.c | 47 +- drivers/iio/adc/ad7779.c | 101 +- drivers/iio/adc/ad7791.c | 31 +- drivers/iio/adc/ad7793.c | 80 +- drivers/iio/adc/ad7887.c | 7 +- drivers/iio/adc/ad7923.c | 7 +- drivers/iio/adc/ad7944.c | 314 +++- drivers/iio/adc/ad799x.c | 14 +- drivers/iio/adc/ad9467.c | 23 +- drivers/iio/adc/ad_sigma_delta.c | 24 +- drivers/iio/adc/adi-axi-adc.c | 305 +++- drivers/iio/adc/at91-sama5d2_adc.c | 54 +- drivers/iio/adc/dln2-adc.c | 7 +- drivers/iio/adc/max1027.c | 37 +- drivers/iio/adc/max11410.c | 72 +- drivers/iio/adc/max1363.c | 165 +- drivers/iio/adc/max34408.c | 1 + drivers/iio/adc/pac1921.c | 1 + drivers/iio/adc/rockchip_saradc.c | 42 +- drivers/iio/adc/rtq6056.c | 46 +- drivers/iio/adc/stm32-adc-core.c | 6 +- drivers/iio/adc/stm32-adc.c | 7 +- drivers/iio/adc/stm32-dfsdm-adc.c | 76 +- drivers/iio/adc/ti-adc084s021.c | 9 +- drivers/iio/adc/ti-adc108s102.c | 7 +- drivers/iio/adc/ti-adc161s626.c | 14 +- drivers/iio/adc/ti-ads1119.c | 17 +- drivers/iio/adc/ti-ads124s08.c | 2 +- drivers/iio/adc/ti-ads1298.c | 7 +- drivers/iio/adc/ti-ads131e08.c | 14 +- drivers/iio/adc/ti-ads7138.c | 749 +++++++++ drivers/iio/adc/ti-ads7924.c | 7 +- drivers/iio/adc/ti-tlc4541.c | 7 +- drivers/iio/addac/ad74413r.c | 14 +- drivers/iio/amplifiers/hmc425a.c | 3 +- drivers/iio/buffer/industrialio-buffer-dma.c | 4 +- drivers/iio/buffer/industrialio-buffer-dmaengine.c | 144 +- drivers/iio/chemical/ens160_core.c | 32 +- drivers/iio/chemical/scd30_core.c | 70 +- drivers/iio/common/cros_ec_sensors/Makefile | 3 +- .../common/cros_ec_sensors/cros_ec_sensors_core.c | 9 +- .../common/cros_ec_sensors/cros_ec_sensors_trace.c | 32 + .../common/cros_ec_sensors/cros_ec_sensors_trace.h | 56 + drivers/iio/dac/Kconfig | 3 + drivers/iio/dac/ad3552r-common.c | 50 +- drivers/iio/dac/ad3552r-hs.c | 333 +++- drivers/iio/dac/ad3552r-hs.h | 8 + drivers/iio/dac/ad3552r.c | 36 - drivers/iio/dac/ad3552r.h | 9 +- drivers/iio/dac/ad5791.c | 181 ++- drivers/iio/dac/ad8460.c | 18 +- drivers/iio/dac/adi-axi-dac.c | 35 +- drivers/iio/dummy/iio_simple_dummy.c | 119 +- drivers/iio/frequency/adf4371.c | 45 +- drivers/iio/gyro/bmg160_i2c.c | 1 + drivers/iio/gyro/bmg160_spi.c | 10 + drivers/iio/humidity/dht11.c | 3 +- drivers/iio/imu/Kconfig | 13 + drivers/iio/imu/Makefile | 1 + drivers/iio/imu/adis.c | 35 +- drivers/iio/imu/adis16550.c | 1147 ++++++++++++++ drivers/iio/imu/bmi270/bmi270.h | 17 +- drivers/iio/imu/bmi270/bmi270_core.c | 374 ++++- drivers/iio/imu/bmi323/bmi323_core.c | 44 +- drivers/iio/industrialio-backend.c | 64 +- drivers/iio/industrialio-core.c | 9 +- drivers/iio/industrialio-event.c | 2 + drivers/iio/industrialio-gts-helper.c | 283 ++-- drivers/iio/light/Kconfig | 22 + drivers/iio/light/Makefile | 2 + drivers/iio/light/adux1020.c | 1 - drivers/iio/light/al3000a.c | 209 +++ drivers/iio/light/apds9160.c | 1594 ++++++++++++++++++++ drivers/iio/light/bh1745.c | 18 +- drivers/iio/light/cm32181.c | 2 +- drivers/iio/light/cm36651.c | 2 +- drivers/iio/light/veml6030.c | 608 ++++---- drivers/iio/light/veml6075.c | 8 +- drivers/iio/magnetometer/Kconfig | 11 + drivers/iio/magnetometer/Makefile | 2 + drivers/iio/magnetometer/af8133j.c | 1 - drivers/iio/magnetometer/si7210.c | 446 ++++++ drivers/iio/pressure/zpa2326_i2c.c | 1 - drivers/iio/pressure/zpa2326_spi.c | 1 - drivers/iio/proximity/irsd200.c | 3 +- drivers/iio/proximity/sx9310.c | 19 +- drivers/iio/proximity/sx9324.c | 19 +- drivers/iio/proximity/sx9360.c | 19 +- drivers/iio/resolver/ad2s1210.c | 17 +- drivers/iio/temperature/tmp006.c | 33 +- drivers/spi/Kconfig | 15 + drivers/spi/Makefile | 4 + drivers/spi/spi-offload-trigger-pwm.c | 162 ++ drivers/spi/spi-offload.c | 465 ++++++ drivers/spi/spi.c | 10 + drivers/staging/iio/accel/Kconfig | 12 - drivers/staging/iio/accel/Makefile | 1 - drivers/staging/iio/accel/adis16240.c | 443 ------ drivers/staging/iio/frequency/ad9832.c | 37 +- drivers/staging/iio/frequency/ad9834.c | 22 +- include/dt-bindings/iio/adc/adi,ad4695.h | 7 + include/linux/gpio/consumer.h | 11 + include/linux/iio/adc/ad_sigma_delta.h | 4 +- include/linux/iio/backend.h | 19 + include/linux/iio/buffer-dmaengine.h | 7 +- include/linux/iio/iio-gts-helper.h | 1 + include/linux/iio/iio.h | 41 +- include/linux/iio/imu/adis.h | 34 +- include/linux/spi/offload/consumer.h | 39 + include/linux/spi/offload/provider.h | 47 + include/linux/spi/offload/types.h | 99 ++ include/linux/spi/spi.h | 20 + include/uapi/linux/iio/types.h | 2 + tools/iio/iio_event_monitor.c | 4 + 181 files changed, 16873 insertions(+), 3075 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130 create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad4030.yaml create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad4851.yaml create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7191.yaml create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,ads7138.yaml create mode 100644 Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml create mode 100644 Documentation/devicetree/bindings/iio/light/brcm,apds9160.yaml create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/silabs,si7210.yaml create mode 100644 Documentation/devicetree/bindings/trigger-source/pwm-trigger.yaml create mode 100644 Documentation/iio/ad4030.rst create mode 100644 Documentation/iio/ad7191.rst create mode 100644 Documentation/iio/adis16550.rst create mode 100644 Documentation/iio/iio_adc.rst create mode 100644 drivers/iio/adc/ad4030.c create mode 100644 drivers/iio/adc/ad4851.c create mode 100644 drivers/iio/adc/ad7191.c create mode 100644 drivers/iio/adc/ad7606_bus_iface.h create mode 100644 drivers/iio/adc/ti-ads7138.c create mode 100644 drivers/iio/common/cros_ec_sensors/cros_ec_sensors_trace.c create mode 100644 drivers/iio/common/cros_ec_sensors/cros_ec_sensors_trace.h create mode 100644 drivers/iio/imu/adis16550.c create mode 100644 drivers/iio/light/al3000a.c create mode 100644 drivers/iio/light/apds9160.c create mode 100644 drivers/iio/magnetometer/si7210.c create mode 100644 drivers/spi/spi-offload-trigger-pwm.c create mode 100644 drivers/spi/spi-offload.c delete mode 100644 drivers/staging/iio/accel/adis16240.c create mode 100644 include/linux/spi/offload/consumer.h create mode 100644 include/linux/spi/offload/provider.h create mode 100644 include/linux/spi/offload/types.h