diff mbox series

[5/5] drm/mediatek: Add eDP phy driver for mt8196

Message ID 20250418065313.8972-6-bincai.liu@mediatek.com
State New
Headers show
Series eDP driver for mt8196 | expand

Commit Message

Bincai Liu April 18, 2025, 6:52 a.m. UTC 
Add code to support eDP phy for mt8196.

Signed-off-by: Bincai Liu <bincai.liu@mediatek.com>
---
 drivers/phy/mediatek/Makefile      |   1 +
 drivers/phy/mediatek/phy-mtk-edp.c | 262 +++++++++++++++++++++++++++++
 2 files changed, 263 insertions(+)
 create mode 100644 drivers/phy/mediatek/phy-mtk-edp.c

Comments

Vinod Koul April 18, 2025, 11:30 a.m. UTC | #1 
On 18-04-25, 14:52, Bincai Liu wrote:
> Add code to support eDP phy for mt8196.

Why is the patch title not "phy: add eDP phy...." why is this tagged
drm? 

> 
> Signed-off-by: Bincai Liu <bincai.liu@mediatek.com>
> ---
>  drivers/phy/mediatek/Makefile      |   1 +
>  drivers/phy/mediatek/phy-mtk-edp.c | 262 +++++++++++++++++++++++++++++
>  2 files changed, 263 insertions(+)
>  create mode 100644 drivers/phy/mediatek/phy-mtk-edp.c
> 
> diff --git a/drivers/phy/mediatek/Makefile b/drivers/phy/mediatek/Makefile
> index 1b8088df71e8..49d9ea42497a 100644
> --- a/drivers/phy/mediatek/Makefile
> +++ b/drivers/phy/mediatek/Makefile
> @@ -4,6 +4,7 @@
>  #
>  
>  obj-$(CONFIG_PHY_MTK_DP)		+= phy-mtk-dp.o
> +obj-$(CONFIG_PHY_MTK_DP)		+= phy-mtk-edp.o
>  obj-$(CONFIG_PHY_MTK_PCIE)		+= phy-mtk-pcie.o
>  obj-$(CONFIG_PHY_MTK_TPHY)		+= phy-mtk-tphy.o
>  obj-$(CONFIG_PHY_MTK_UFS)		+= phy-mtk-ufs.o
> diff --git a/drivers/phy/mediatek/phy-mtk-edp.c b/drivers/phy/mediatek/phy-mtk-edp.c
> new file mode 100644
> index 000000000000..fadcbda55b70
> --- /dev/null
> +++ b/drivers/phy/mediatek/phy-mtk-edp.c
> @@ -0,0 +1,262 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2019-2022 MediaTek Inc.
> + * Copyright (c) 2022 BayLibre
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/of.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +
> +#define PHYD_OFFSET			0x0000
> +#define PHYD_DIG_LAN0_OFFSET		0x1000
> +#define PHYD_DIG_LAN1_OFFSET		0x1100
> +#define PHYD_DIG_LAN2_OFFSET		0x1200
> +#define PHYD_DIG_LAN3_OFFSET		0x1300
> +#define PHYD_DIG_GLB_OFFSET		0x1400
> +
> +#define DP_PHY_DIG_PLL_CTL_0		(PHYD_DIG_GLB_OFFSET + 0x10)
> +#define FORCE_PWORE_STATE_FLDMASK		GENMASK(2, 0)
> +#define FORCE_PWORE_STATE_VALUE			0x7
> +
> +#define IPMUX_CONTROL			(PHYD_DIG_GLB_OFFSET + 0x98)
> +#define EDPTX_DSI_PHYD_SEL_FLDMASK		0x1
> +#define EDPTX_DSI_PHYD_SEL_FLDMASK_POS		0
> +
> +#define DP_PHY_DIG_TX_CTL_0		(PHYD_DIG_GLB_OFFSET + 0x74)
> +#define TX_LN_EN_FLDMASK			0xf
> +
> +#define mtk_edp_PHY_DIG_PLL_CTL_1	(PHYD_DIG_GLB_OFFSET + 0x14)
> +#define TPLL_SSC_EN				BIT(8)
> +
> +#define mtk_edp_PHY_DIG_BIT_RATE		(PHYD_DIG_GLB_OFFSET + 0x3C)
> +#define BIT_RATE_RBR				0x1
> +#define BIT_RATE_HBR				0x4
> +#define BIT_RATE_HBR2				0x7
> +#define BIT_RATE_HBR3				0x9
> +
> +#define mtk_edp_PHY_DIG_SW_RST		(PHYD_DIG_GLB_OFFSET + 0x38)
> +#define DP_GLB_SW_RST_PHYD			BIT(0)
> +#define DP_GLB_SW_RST_PHYD_MASK			BIT(0)
> +
> +#define DRIVING_FORCE			0x30
> +#define EDP_TX_LN_VOLT_SWING_VAL_FLDMASK	0x6
> +#define EDP_TX_LN_VOLT_SWING_VAL_FLDMASK_POS	1
> +#define EDP_TX_LN_PRE_EMPH_VAL_FLDMASK		0x18
> +#define EDP_TX_LN_PRE_EMPH_VAL_FLDMASK_POS	3
> +
> +struct mtk_edp_phy {
> +	struct regmap *regs;
> +};
> +
> +enum DPTX_LANE_NUM {
> +	DPTX_LANE0 = 0x0,
> +	DPTX_LANE1 = 0x1,
> +	DPTX_LANE2 = 0x2,
> +	DPTX_LANE3 = 0x3,
> +	DPTX_LANE_MAX,
> +};
> +
> +enum DPTX_LANE_COUNT {
> +	DPTX_LANE_COUNT1 = 0x1,
> +	DPTX_LANE_COUNT2 = 0x2,
> +	DPTX_LANE_COUNT4 = 0x4,
> +};
> +
> +static void mtk_edptx_phyd_reset_swing_pre(struct mtk_edp_phy *edp_phy)
> +{
> +	regmap_update_bits(edp_phy->regs, PHYD_DIG_LAN0_OFFSET + DRIVING_FORCE,
> +			   EDP_TX_LN_VOLT_SWING_VAL_FLDMASK |
> +			   EDP_TX_LN_PRE_EMPH_VAL_FLDMASK, 0x0);
> +	regmap_update_bits(edp_phy->regs, PHYD_DIG_LAN1_OFFSET + DRIVING_FORCE,
> +			   EDP_TX_LN_VOLT_SWING_VAL_FLDMASK |
> +			   EDP_TX_LN_PRE_EMPH_VAL_FLDMASK, 0x0);
> +	regmap_update_bits(edp_phy->regs, PHYD_DIG_LAN2_OFFSET + DRIVING_FORCE,
> +			   EDP_TX_LN_VOLT_SWING_VAL_FLDMASK |
> +			   EDP_TX_LN_PRE_EMPH_VAL_FLDMASK, 0x0);
> +	regmap_update_bits(edp_phy->regs, PHYD_DIG_LAN3_OFFSET + DRIVING_FORCE,
> +			   EDP_TX_LN_VOLT_SWING_VAL_FLDMASK |
> +			   EDP_TX_LN_PRE_EMPH_VAL_FLDMASK, 0x0);
> +}
> +
> +static int mtk_edp_phy_init(struct phy *phy)
> +{
> +	struct mtk_edp_phy *edp_phy = phy_get_drvdata(phy);
> +
> +	regmap_update_bits(edp_phy->regs, IPMUX_CONTROL, 0,
> +			   EDPTX_DSI_PHYD_SEL_FLDMASK);
> +
> +	regmap_update_bits(edp_phy->regs, DP_PHY_DIG_PLL_CTL_0,
> +			   FORCE_PWORE_STATE_VALUE,
> +			   FORCE_PWORE_STATE_FLDMASK);
> +
> +	return 0;

consider making this void return type
diff mbox series

Patch

diff --git a/drivers/phy/mediatek/Makefile b/drivers/phy/mediatek/Makefile
index 1b8088df71e8..49d9ea42497a 100644
--- a/drivers/phy/mediatek/Makefile
+++ b/drivers/phy/mediatek/Makefile
@@ -4,6 +4,7 @@ 
 #
 
 obj-$(CONFIG_PHY_MTK_DP)		+= phy-mtk-dp.o
+obj-$(CONFIG_PHY_MTK_DP)		+= phy-mtk-edp.o
 obj-$(CONFIG_PHY_MTK_PCIE)		+= phy-mtk-pcie.o
 obj-$(CONFIG_PHY_MTK_TPHY)		+= phy-mtk-tphy.o
 obj-$(CONFIG_PHY_MTK_UFS)		+= phy-mtk-ufs.o
diff --git a/drivers/phy/mediatek/phy-mtk-edp.c b/drivers/phy/mediatek/phy-mtk-edp.c
new file mode 100644
index 000000000000..fadcbda55b70
--- /dev/null
+++ b/drivers/phy/mediatek/phy-mtk-edp.c
@@ -0,0 +1,262 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019-2022 MediaTek Inc.
+ * Copyright (c) 2022 BayLibre
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define PHYD_OFFSET			0x0000
+#define PHYD_DIG_LAN0_OFFSET		0x1000
+#define PHYD_DIG_LAN1_OFFSET		0x1100
+#define PHYD_DIG_LAN2_OFFSET		0x1200
+#define PHYD_DIG_LAN3_OFFSET		0x1300
+#define PHYD_DIG_GLB_OFFSET		0x1400
+
+#define DP_PHY_DIG_PLL_CTL_0		(PHYD_DIG_GLB_OFFSET + 0x10)
+#define FORCE_PWORE_STATE_FLDMASK		GENMASK(2, 0)
+#define FORCE_PWORE_STATE_VALUE			0x7
+
+#define IPMUX_CONTROL			(PHYD_DIG_GLB_OFFSET + 0x98)
+#define EDPTX_DSI_PHYD_SEL_FLDMASK		0x1
+#define EDPTX_DSI_PHYD_SEL_FLDMASK_POS		0
+
+#define DP_PHY_DIG_TX_CTL_0		(PHYD_DIG_GLB_OFFSET + 0x74)
+#define TX_LN_EN_FLDMASK			0xf
+
+#define mtk_edp_PHY_DIG_PLL_CTL_1	(PHYD_DIG_GLB_OFFSET + 0x14)
+#define TPLL_SSC_EN				BIT(8)
+
+#define mtk_edp_PHY_DIG_BIT_RATE		(PHYD_DIG_GLB_OFFSET + 0x3C)
+#define BIT_RATE_RBR				0x1
+#define BIT_RATE_HBR				0x4
+#define BIT_RATE_HBR2				0x7
+#define BIT_RATE_HBR3				0x9
+
+#define mtk_edp_PHY_DIG_SW_RST		(PHYD_DIG_GLB_OFFSET + 0x38)
+#define DP_GLB_SW_RST_PHYD			BIT(0)
+#define DP_GLB_SW_RST_PHYD_MASK			BIT(0)
+
+#define DRIVING_FORCE			0x30
+#define EDP_TX_LN_VOLT_SWING_VAL_FLDMASK	0x6
+#define EDP_TX_LN_VOLT_SWING_VAL_FLDMASK_POS	1
+#define EDP_TX_LN_PRE_EMPH_VAL_FLDMASK		0x18
+#define EDP_TX_LN_PRE_EMPH_VAL_FLDMASK_POS	3
+
+struct mtk_edp_phy {
+	struct regmap *regs;
+};
+
+enum DPTX_LANE_NUM {
+	DPTX_LANE0 = 0x0,
+	DPTX_LANE1 = 0x1,
+	DPTX_LANE2 = 0x2,
+	DPTX_LANE3 = 0x3,
+	DPTX_LANE_MAX,
+};
+
+enum DPTX_LANE_COUNT {
+	DPTX_LANE_COUNT1 = 0x1,
+	DPTX_LANE_COUNT2 = 0x2,
+	DPTX_LANE_COUNT4 = 0x4,
+};
+
+static void mtk_edptx_phyd_reset_swing_pre(struct mtk_edp_phy *edp_phy)
+{
+	regmap_update_bits(edp_phy->regs, PHYD_DIG_LAN0_OFFSET + DRIVING_FORCE,
+			   EDP_TX_LN_VOLT_SWING_VAL_FLDMASK |
+			   EDP_TX_LN_PRE_EMPH_VAL_FLDMASK, 0x0);
+	regmap_update_bits(edp_phy->regs, PHYD_DIG_LAN1_OFFSET + DRIVING_FORCE,
+			   EDP_TX_LN_VOLT_SWING_VAL_FLDMASK |
+			   EDP_TX_LN_PRE_EMPH_VAL_FLDMASK, 0x0);
+	regmap_update_bits(edp_phy->regs, PHYD_DIG_LAN2_OFFSET + DRIVING_FORCE,
+			   EDP_TX_LN_VOLT_SWING_VAL_FLDMASK |
+			   EDP_TX_LN_PRE_EMPH_VAL_FLDMASK, 0x0);
+	regmap_update_bits(edp_phy->regs, PHYD_DIG_LAN3_OFFSET + DRIVING_FORCE,
+			   EDP_TX_LN_VOLT_SWING_VAL_FLDMASK |
+			   EDP_TX_LN_PRE_EMPH_VAL_FLDMASK, 0x0);
+}
+
+static int mtk_edp_phy_init(struct phy *phy)
+{
+	struct mtk_edp_phy *edp_phy = phy_get_drvdata(phy);
+
+	regmap_update_bits(edp_phy->regs, IPMUX_CONTROL, 0,
+			   EDPTX_DSI_PHYD_SEL_FLDMASK);
+
+	regmap_update_bits(edp_phy->regs, DP_PHY_DIG_PLL_CTL_0,
+			   FORCE_PWORE_STATE_VALUE,
+			   FORCE_PWORE_STATE_FLDMASK);
+
+	return 0;
+}
+
+static int mtk_edp_phy_configure(struct phy *phy, union phy_configure_opts *opts)
+{
+	struct mtk_edp_phy *edp_phy = phy_get_drvdata(phy);
+	u32 val;
+
+	if (opts->dp.set_rate) {
+		switch (opts->dp.link_rate) {
+		case 1620:
+			val = BIT_RATE_RBR;
+			break;
+		case 2700:
+			val = BIT_RATE_HBR;
+			break;
+		case 5400:
+			val = BIT_RATE_HBR2;
+			break;
+		case 8100:
+			val = BIT_RATE_HBR3;
+			break;
+		default:
+			dev_err(&phy->dev,
+				"Implementation error, unknown linkrate %x\n",
+				opts->dp.link_rate);
+			return -EINVAL;
+		}
+		regmap_write(edp_phy->regs, mtk_edp_PHY_DIG_BIT_RATE, val);
+	}
+
+	if (opts->dp.set_lanes) {
+		for (val = 0; val < 4; val++) {
+			regmap_update_bits(edp_phy->regs, DP_PHY_DIG_TX_CTL_0,
+					   ((1 << (val + 1)) - 1),
+					   TX_LN_EN_FLDMASK);
+		}
+	}
+
+	if (opts->dp.set_voltages) {
+		switch (opts->dp.lanes) {
+		case DPTX_LANE_COUNT1:
+			regmap_update_bits(edp_phy->regs, PHYD_DIG_LAN0_OFFSET +
+					   DRIVING_FORCE,
+					   EDP_TX_LN_VOLT_SWING_VAL_FLDMASK |
+					   EDP_TX_LN_PRE_EMPH_VAL_FLDMASK,
+					   opts->dp.voltage[DPTX_LANE0] << 1 |
+					   opts->dp.pre[DPTX_LANE0] << 3);
+		break;
+		case DPTX_LANE_COUNT2:
+			regmap_update_bits(edp_phy->regs, PHYD_DIG_LAN0_OFFSET +
+					   DRIVING_FORCE,
+					   EDP_TX_LN_VOLT_SWING_VAL_FLDMASK |
+					   EDP_TX_LN_PRE_EMPH_VAL_FLDMASK,
+					   opts->dp.voltage[DPTX_LANE0] << 1 |
+					   opts->dp.pre[DPTX_LANE0] << 3);
+			regmap_update_bits(edp_phy->regs, PHYD_DIG_LAN1_OFFSET +
+					   DRIVING_FORCE,
+					   EDP_TX_LN_VOLT_SWING_VAL_FLDMASK |
+					   EDP_TX_LN_PRE_EMPH_VAL_FLDMASK,
+					   opts->dp.voltage[DPTX_LANE1] << 1 |
+					   opts->dp.pre[DPTX_LANE1] << 3);
+		break;
+		case DPTX_LANE_COUNT4:
+			regmap_update_bits(edp_phy->regs, PHYD_DIG_LAN0_OFFSET +
+					   DRIVING_FORCE,
+					   EDP_TX_LN_VOLT_SWING_VAL_FLDMASK |
+					   EDP_TX_LN_PRE_EMPH_VAL_FLDMASK,
+					   opts->dp.voltage[DPTX_LANE0] << 1 |
+					   opts->dp.pre[DPTX_LANE0] << 3);
+			regmap_update_bits(edp_phy->regs, PHYD_DIG_LAN1_OFFSET +
+					   DRIVING_FORCE,
+					   EDP_TX_LN_VOLT_SWING_VAL_FLDMASK |
+					   EDP_TX_LN_PRE_EMPH_VAL_FLDMASK,
+					   opts->dp.voltage[DPTX_LANE1] << 1 |
+					   opts->dp.pre[DPTX_LANE1] << 3);
+			regmap_update_bits(edp_phy->regs, PHYD_DIG_LAN2_OFFSET +
+					   DRIVING_FORCE,
+					   EDP_TX_LN_VOLT_SWING_VAL_FLDMASK |
+					   EDP_TX_LN_PRE_EMPH_VAL_FLDMASK,
+					   opts->dp.voltage[DPTX_LANE2] << 1 |
+					   opts->dp.pre[DPTX_LANE2] << 3);
+			regmap_update_bits(edp_phy->regs, PHYD_DIG_LAN3_OFFSET +
+					   DRIVING_FORCE,
+					   EDP_TX_LN_VOLT_SWING_VAL_FLDMASK |
+					   EDP_TX_LN_PRE_EMPH_VAL_FLDMASK,
+					   opts->dp.voltage[DPTX_LANE3] << 1 |
+					   opts->dp.pre[DPTX_LANE3] << 3);
+		break;
+		default:
+			dev_err(&phy->dev, "Wrong lanes config: %x\n",
+				opts->dp.lanes);
+			return -EINVAL;
+		}
+	}
+
+	regmap_update_bits(edp_phy->regs, mtk_edp_PHY_DIG_PLL_CTL_1,
+			   TPLL_SSC_EN, opts->dp.ssc ? 0 : TPLL_SSC_EN);
+
+	return 0;
+}
+
+static int mtk_edp_phy_reset(struct phy *phy)
+{
+	struct mtk_edp_phy *edp_phy = phy_get_drvdata(phy);
+
+	regmap_update_bits(edp_phy->regs, mtk_edp_PHY_DIG_SW_RST,
+			   0, DP_GLB_SW_RST_PHYD_MASK);
+	usleep_range(50, 200);
+	regmap_update_bits(edp_phy->regs, mtk_edp_PHY_DIG_SW_RST,
+			   DP_GLB_SW_RST_PHYD, DP_GLB_SW_RST_PHYD_MASK);
+	regmap_update_bits(edp_phy->regs, DP_PHY_DIG_TX_CTL_0,
+			   0x0, TX_LN_EN_FLDMASK);
+	mtk_edptx_phyd_reset_swing_pre(edp_phy);
+
+	return 0;
+}
+
+static const struct phy_ops mtk_edp_phy_dev_ops = {
+	.init = mtk_edp_phy_init,
+	.configure = mtk_edp_phy_configure,
+	.reset = mtk_edp_phy_reset,
+	.owner = THIS_MODULE,
+};
+
+static int mtk_edp_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct mtk_edp_phy *edp_phy;
+	struct phy *phy;
+	struct regmap *regs;
+
+	regs = *(struct regmap **)dev->platform_data;
+	if (!regs)
+		return dev_err_probe(dev, -EINVAL,
+				     "No data passed, requires struct regmap**\n");
+
+	edp_phy = devm_kzalloc(dev, sizeof(*edp_phy), GFP_KERNEL);
+	if (!edp_phy)
+		return -ENOMEM;
+
+	edp_phy->regs = regs;
+	phy = devm_phy_create(dev, NULL, &mtk_edp_phy_dev_ops);
+	if (IS_ERR(phy))
+		return dev_err_probe(dev, PTR_ERR(phy),
+				     "Failed to create DP PHY\n");
+
+	phy_set_drvdata(phy, edp_phy);
+	if (!dev->of_node)
+		phy_create_lookup(phy, "edp", dev_name(dev));
+
+	return 0;
+}
+
+struct platform_driver mtk_edp_phy_driver = {
+	.probe = mtk_edp_phy_probe,
+	.driver = {
+		.name = "mediatek-edp-phy",
+	},
+};
+
+module_platform_driver(mtk_edp_phy_driver);
+
+MODULE_AUTHOR("Markus Schneider-Pargmann <msp@baylibre.com>");
+MODULE_DESCRIPTION("MediaTek DP PHY Driver");
+MODULE_LICENSE("GPL");