| Message ID | 1342704392-23657-9-git-send-email-t-kristo@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi On Thu, 19 Jul 2012, Tero Kristo wrote: > On OMAP4430 HS / EMU chips, ROM code appears to re-configure L4PER domain > next powerstate during wakeup from OSWR / OFF, programming it to ON. > This will prevent successive entries to cpuidle retention / off, until > kernel decices to change the L4PER target state, which can be delayed > for a very long time as kernel is lazy programming the target state. > > This patch fixes the issue within the low power OSWR / OFF mode code, so > that this register is saved / restored across MPU OSWR / OFF state. > > This problem seems to only occur with OMAP4430 HS/EMU, it does not impact > OMAP4460+ or GP devices. > > Signed-off-by: Tero Kristo <t-kristo@ti.com> > --- > arch/arm/mach-omap2/omap-mpuss-lowpower.c | 39 ++++++++++++++++++++++++++++- > arch/arm/mach-omap2/pm.h | 1 + > arch/arm/mach-omap2/pm44xx.c | 10 +++++++ > 3 files changed, 49 insertions(+), 1 deletions(-) > > diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c > index 0e5f81b..963a61b 100644 > --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c > +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c ... > @@ -215,6 +225,28 @@ static void save_l2x0_context(void) > {} > #endif > > +static inline void save_l4per_regs(void) > +{ > + int i; > + > + if (!IS_PM44XX_ERRATUM(PM_OMAP4_ROM_L4PER_ERRATUM_PWSTCT)) > + return; > + > + for (i = 0; i < ARRAY_SIZE(l4per_reg); i++) > + l4per_reg[i].val = __raw_readl(l4per_reg[i].addr); This is accessing the system PRM registers directly. We're trying to remove these raw register accesses from non-PRM code because a PRM driver is in the works. Please move this to prm44xx.c or prminst44xx.c and implement a higher-level interface that omap-mpuss-lowpower.c can call. - Paul -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, 2012-07-19 at 17:21 -0600, Paul Walmsley wrote: > Hi > > On Thu, 19 Jul 2012, Tero Kristo wrote: > > > On OMAP4430 HS / EMU chips, ROM code appears to re-configure L4PER domain > > next powerstate during wakeup from OSWR / OFF, programming it to ON. > > This will prevent successive entries to cpuidle retention / off, until > > kernel decices to change the L4PER target state, which can be delayed > > for a very long time as kernel is lazy programming the target state. > > > > This patch fixes the issue within the low power OSWR / OFF mode code, so > > that this register is saved / restored across MPU OSWR / OFF state. > > > > This problem seems to only occur with OMAP4430 HS/EMU, it does not impact > > OMAP4460+ or GP devices. > > > > Signed-off-by: Tero Kristo <t-kristo@ti.com> > > --- > > arch/arm/mach-omap2/omap-mpuss-lowpower.c | 39 ++++++++++++++++++++++++++++- > > arch/arm/mach-omap2/pm.h | 1 + > > arch/arm/mach-omap2/pm44xx.c | 10 +++++++ > > 3 files changed, 49 insertions(+), 1 deletions(-) > > > > diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c > > index 0e5f81b..963a61b 100644 > > --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c > > +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c > > ... > > > @@ -215,6 +225,28 @@ static void save_l2x0_context(void) > > {} > > #endif > > > > +static inline void save_l4per_regs(void) > > +{ > > + int i; > > + > > + if (!IS_PM44XX_ERRATUM(PM_OMAP4_ROM_L4PER_ERRATUM_PWSTCT)) > > + return; > > + > > + for (i = 0; i < ARRAY_SIZE(l4per_reg); i++) > > + l4per_reg[i].val = __raw_readl(l4per_reg[i].addr); > > This is accessing the system PRM registers directly. We're trying to > remove these raw register accesses from non-PRM code because a PRM driver > is in the works. Please move this to prm44xx.c or prminst44xx.c and > implement a higher-level interface that omap-mpuss-lowpower.c can call. Ok, will figure out something for next rev. -Tero -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, 2012-07-19 at 17:21 -0600, Paul Walmsley wrote: > Hi > > On Thu, 19 Jul 2012, Tero Kristo wrote: > > > On OMAP4430 HS / EMU chips, ROM code appears to re-configure L4PER domain > > next powerstate during wakeup from OSWR / OFF, programming it to ON. > > This will prevent successive entries to cpuidle retention / off, until > > kernel decices to change the L4PER target state, which can be delayed > > for a very long time as kernel is lazy programming the target state. > > > > This patch fixes the issue within the low power OSWR / OFF mode code, so > > that this register is saved / restored across MPU OSWR / OFF state. > > > > This problem seems to only occur with OMAP4430 HS/EMU, it does not impact > > OMAP4460+ or GP devices. > > > > Signed-off-by: Tero Kristo <t-kristo@ti.com> > > --- > > arch/arm/mach-omap2/omap-mpuss-lowpower.c | 39 ++++++++++++++++++++++++++++- > > arch/arm/mach-omap2/pm.h | 1 + > > arch/arm/mach-omap2/pm44xx.c | 10 +++++++ > > 3 files changed, 49 insertions(+), 1 deletions(-) > > > > diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c > > index 0e5f81b..963a61b 100644 > > --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c > > +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c > > ... > > > @@ -215,6 +225,28 @@ static void save_l2x0_context(void) > > {} > > #endif > > > > +static inline void save_l4per_regs(void) > > +{ > > + int i; > > + > > + if (!IS_PM44XX_ERRATUM(PM_OMAP4_ROM_L4PER_ERRATUM_PWSTCT)) > > + return; > > + > > + for (i = 0; i < ARRAY_SIZE(l4per_reg); i++) > > + l4per_reg[i].val = __raw_readl(l4per_reg[i].addr); > > This is accessing the system PRM registers directly. We're trying to > remove these raw register accesses from non-PRM code because a PRM driver > is in the works. Please move this to prm44xx.c or prminst44xx.c and > implement a higher-level interface that omap-mpuss-lowpower.c can call. It looks like this can be dropped out for now completely, I guess I had a broken PPA on my board which was causing this problem. -Tero -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index 0e5f81b..963a61b 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -52,6 +52,7 @@ #include <plat/omap44xx.h> +#include "iomap.h" #include "common.h" #include "omap4-sar-layout.h" #include "pm.h" @@ -97,6 +98,15 @@ static inline void set_cpu_next_pwrst(unsigned int cpu_id, omap_set_pwrdm_state(pm_info->pwrdm, power_state); } +struct reg_tuple { + void __iomem *addr; + u32 val; +}; + +static struct reg_tuple l4per_reg[] = { + {.addr = OMAP4430_PM_L4PER_PWRSTCTRL}, +}; + /* * Read CPU's previous power state */ @@ -215,6 +225,28 @@ static void save_l2x0_context(void) {} #endif +static inline void save_l4per_regs(void) +{ + int i; + + if (!IS_PM44XX_ERRATUM(PM_OMAP4_ROM_L4PER_ERRATUM_PWSTCT)) + return; + + for (i = 0; i < ARRAY_SIZE(l4per_reg); i++) + l4per_reg[i].val = __raw_readl(l4per_reg[i].addr); +} + +static inline void restore_l4per_regs(void) +{ + int i; + + if (!IS_PM44XX_ERRATUM(PM_OMAP4_ROM_L4PER_ERRATUM_PWSTCT)) + return; + + for (i = 0; i < ARRAY_SIZE(l4per_reg); i++) + __raw_writel(l4per_reg[i].val, l4per_reg[i].addr); +} + /** * omap4_enter_lowpower: OMAP4 MPUSS Low Power Entry Function * The purpose of this function is to manage low power programming @@ -265,8 +297,10 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) * In MPUSS OSWR or device OFF, interrupt controller context is lost. */ mpuss_clear_prev_logic_pwrst(); - if (pwrdm_read_next_func_pwrst(mpuss_pd) == PWRDM_FUNC_PWRST_OSWR) + if (pwrdm_read_next_func_pwrst(mpuss_pd) == PWRDM_FUNC_PWRST_OSWR) { + save_l4per_regs(); save_state = 2; + } cpu_clear_prev_logic_pwrst(cpu); set_cpu_next_pwrst(cpu, power_state); @@ -289,6 +323,9 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) wakeup_cpu = smp_processor_id(); set_cpu_next_pwrst(wakeup_cpu, PWRDM_FUNC_PWRST_ON); + if (omap4_mpuss_read_prev_context_state()) + restore_l4per_regs(); + pwrdm_post_transition(); return 0; diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index d95d1d0..adce520 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -89,6 +89,7 @@ static inline void enable_omap3630_toggle_l2_on_restore(void) { } #endif /* defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) */ #define PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD (1 << 0) +#define PM_OMAP4_ROM_L4PER_ERRATUM_PWSTCT (1 << 1) #if defined(CONFIG_ARCH_OMAP4) extern u16 pm44xx_errata; diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index eb3e073..1e98909 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -194,6 +194,16 @@ int __init omap4_pm_init(void) (void) clkdm_for_each(omap_pm_clkdms_setup, NULL); + /* + * ROM core appears to modify the L4PER powerstate control register + * during wakeup from OSWR / OFF, which will prevent further low + * power state transitions until the register is re-programmed. + * Thus, we must save / restore the register during idle. This + * seems to happen only on omap4430, on HS / EMU chips only. + */ + if (cpu_is_omap443x() && omap_type() != OMAP2_DEVICE_TYPE_GP) + pm44xx_errata |= PM_OMAP4_ROM_L4PER_ERRATUM_PWSTCT; + #ifdef CONFIG_SUSPEND omap_pm_suspend = omap4_pm_suspend; #endif
On OMAP4430 HS / EMU chips, ROM code appears to re-configure L4PER domain next powerstate during wakeup from OSWR / OFF, programming it to ON. This will prevent successive entries to cpuidle retention / off, until kernel decices to change the L4PER target state, which can be delayed for a very long time as kernel is lazy programming the target state. This patch fixes the issue within the low power OSWR / OFF mode code, so that this register is saved / restored across MPU OSWR / OFF state. This problem seems to only occur with OMAP4430 HS/EMU, it does not impact OMAP4460+ or GP devices. Signed-off-by: Tero Kristo <t-kristo@ti.com> --- arch/arm/mach-omap2/omap-mpuss-lowpower.c | 39 ++++++++++++++++++++++++++++- arch/arm/mach-omap2/pm.h | 1 + arch/arm/mach-omap2/pm44xx.c | 10 +++++++ 3 files changed, 49 insertions(+), 1 deletions(-)