| Message ID | CAMQu2gxLAVk-LN8R1xBeeL1=iZ-mLSRmtZe4wpQYQPTBsY5RMA@mail.gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Op 3 aug. 2012, om 11:27 heeft "Shilimkar, Santosh" <santosh.shilimkar@ti.com> het volgende geschreven: > On Fri, Aug 3, 2012 at 2:00 PM, Koen Kooi <koen@dominion.thruhere.net> wrote: >> >> Op 3 aug. 2012, om 09:21 heeft Koen Kooi <koen@dominion.thruhere.net> het volgende geschreven: >> >>> >>> Op 3 aug. 2012, om 09:16 heeft Daniel Mack <zonque@gmail.com> het volgende geschreven: >>> >>>> On 30.03.2012 15:27, Santosh Shilimkar wrote: >>>>> For coupled cpuidle to work when both cpus are active, it needs a global timer >>>>> that can handle events for both cpus. This timer is used as the broadcast >>>>> clock-event when the per-cpu timer hardware stop in low power states. >>>>> Set the cpumask of clockevent_gpt to all cpus, set the rating correctly, and >>>>> set the irq to allow the clockevent core to determine the affinity of the >>>>> timer. >>>> >>>> These patches made it to mainline now, shortly befor 3.6-rc1, and it >>>> breaks boot on my AM33xx board. >>>> >>>> Once I revert 1/3, the board boots again but crashes with the Ooops >>>> below. With the entire series reverted, everything works again as >>>> expected. Any idea? >>>> >>>> The upstream commit ids are >>>> >>>> 11d6ec2e "ARM: OMAP: timer: allow gp timer clock-event to be used on >>>> both cpus" >>>> 5b4d5bcc "ARM: OMAP4: CPUidle: add synchronization for coupled idle states" >>>> b93d70ae "ARM: OMAP4: CPUidle: Open broadcast clock-event device." >>> >>> I've had boot problems with cpuidle enabled as well, what happens if you disable it? Is the revert still needed in that case? >> >> To answer my own question: No, the reverts aren't needed if you disable cpuidle. > > This is really strange since CPUIDLE code is really OMAP4 specific. > obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o > > May be omap2plus build some how the code gets executed on AMXX > > Can you try below and see if the boot with CPUIDLE enabled goes away on > AMXX > > diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c > index ea24174..195e756 100644 > --- a/arch/arm/mach-omap2/pm44xx.c > +++ b/arch/arm/mach-omap2/pm44xx.c > @@ -147,6 +147,9 @@ int __init omap4_pm_init(void) > struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm, *l4wkup; > struct clockdomain *ducati_clkdm, *l3_2_clkdm, *l4_per_clkdm; > > + if (!cpu_is_omap44xx()) > + return -ENODEV; > + > if (omap_rev() == OMAP4430_REV_ES1_0) { > WARN(1, "Power Management not supported on OMAP4430 ES1.0\n"); > return -ENODEV; That does seem to fix it: root@beaglebone:~# zcat /proc/config.gz | grep -i cpu_idle CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED=y root@beaglebone:~# zcat /proc/config.gz | grep -i omap4 CONFIG_ARCH_OMAP4=y CONFIG_MACH_OMAP4_PANDA=y # CONFIG_OMAP4_ERRATA_I688 is not set # CONFIG_KEYBOARD_OMAP4 is not set CONFIG_OMAP4_DSS_HDMI=y regards, Koen-- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Aug 03, 2012 at 15:03:07, Koen Kooi wrote: > > Op 3 aug. 2012, om 11:27 heeft "Shilimkar, Santosh" <santosh.shilimkar@ti.com> het volgende geschreven: > > > On Fri, Aug 3, 2012 at 2:00 PM, Koen Kooi <koen@dominion.thruhere.net> wrote: > >> > >> Op 3 aug. 2012, om 09:21 heeft Koen Kooi <koen@dominion.thruhere.net> het volgende geschreven: > >> > >>> > >>> Op 3 aug. 2012, om 09:16 heeft Daniel Mack <zonque@gmail.com> het volgende geschreven: > >>> > >>>> On 30.03.2012 15:27, Santosh Shilimkar wrote: > >>>>> For coupled cpuidle to work when both cpus are active, it needs a global timer > >>>>> that can handle events for both cpus. This timer is used as the broadcast > >>>>> clock-event when the per-cpu timer hardware stop in low power states. > >>>>> Set the cpumask of clockevent_gpt to all cpus, set the rating correctly, and > >>>>> set the irq to allow the clockevent core to determine the affinity of the > >>>>> timer. > >>>> > >>>> These patches made it to mainline now, shortly befor 3.6-rc1, and it > >>>> breaks boot on my AM33xx board. > >>>> > >>>> Once I revert 1/3, the board boots again but crashes with the Ooops > >>>> below. With the entire series reverted, everything works again as > >>>> expected. Any idea? > >>>> > >>>> The upstream commit ids are > >>>> > >>>> 11d6ec2e "ARM: OMAP: timer: allow gp timer clock-event to be used on > >>>> both cpus" > >>>> 5b4d5bcc "ARM: OMAP4: CPUidle: add synchronization for coupled idle states" > >>>> b93d70ae "ARM: OMAP4: CPUidle: Open broadcast clock-event device." > >>> > >>> I've had boot problems with cpuidle enabled as well, what happens if you disable it? Is the revert still needed in that case? > >> > >> To answer my own question: No, the reverts aren't needed if you disable cpuidle. > > > > This is really strange since CPUIDLE code is really OMAP4 specific. > > obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o > > > > May be omap2plus build some how the code gets executed on AMXX > > > > Can you try below and see if the boot with CPUIDLE enabled goes away on > > AMXX > > > > diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c > > index ea24174..195e756 100644 > > --- a/arch/arm/mach-omap2/pm44xx.c > > +++ b/arch/arm/mach-omap2/pm44xx.c > > @@ -147,6 +147,9 @@ int __init omap4_pm_init(void) > > struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm, *l4wkup; > > struct clockdomain *ducati_clkdm, *l3_2_clkdm, *l4_per_clkdm; > > > > + if (!cpu_is_omap44xx()) > > + return -ENODEV; > > + > > if (omap_rev() == OMAP4430_REV_ES1_0) { > > WARN(1, "Power Management not supported on OMAP4430 ES1.0\n"); > > return -ENODEV; > > That does seem to fix it: > > root@beaglebone:~# zcat /proc/config.gz | grep -i cpu_idle > CONFIG_CPU_IDLE=y > CONFIG_CPU_IDLE_GOV_LADDER=y > CONFIG_CPU_IDLE_GOV_MENU=y > CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED=y > root@beaglebone:~# zcat /proc/config.gz | grep -i omap4 > CONFIG_ARCH_OMAP4=y > CONFIG_MACH_OMAP4_PANDA=y > # CONFIG_OMAP4_ERRATA_I688 is not set > # CONFIG_KEYBOARD_OMAP4 is not set > CONFIG_OMAP4_DSS_HDMI=y > This patch is not required, Without this patch is works for me, [root@arago /]# cat /proc/version Linux version 3.6.0-rc1-next-20120803-00010-g5f6bf0f (a0393758@psplinux064) (gcc version 4.5.3 20110311 (prerelease) (GCC) ) #1 SMP Fri Aug 3 15:06:57 IST 2012 [root@arago /]# Do you have below patch?? ARM: OMAP: cpu: Make cpu_class_is_omap2 true for all non-omap1 platforms Also I have pushed branch (based on linux-next/master) to https://github.com/hvaibhav/am335x-linux/tree/am335x-linux-next-master Thanks, Vaibhav -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Aug 3, 2012 at 3:12 PM, Hiremath, Vaibhav <hvaibhav@ti.com> wrote: > On Fri, Aug 03, 2012 at 15:03:07, Koen Kooi wrote: >> >> Op 3 aug. 2012, om 11:27 heeft "Shilimkar, Santosh" <santosh.shilimkar@ti.com> het volgende geschreven: >> >> > On Fri, Aug 3, 2012 at 2:00 PM, Koen Kooi <koen@dominion.thruhere.net> wrote: >> >> >> >> Op 3 aug. 2012, om 09:21 heeft Koen Kooi <koen@dominion.thruhere.net> het volgende geschreven: >> >> >> >>> >> >>> Op 3 aug. 2012, om 09:16 heeft Daniel Mack <zonque@gmail.com> het volgende geschreven: >> >>> >> >>>> On 30.03.2012 15:27, Santosh Shilimkar wrote: >> >>>>> For coupled cpuidle to work when both cpus are active, it needs a global timer >> >>>>> that can handle events for both cpus. This timer is used as the broadcast >> >>>>> clock-event when the per-cpu timer hardware stop in low power states. >> >>>>> Set the cpumask of clockevent_gpt to all cpus, set the rating correctly, and >> >>>>> set the irq to allow the clockevent core to determine the affinity of the >> >>>>> timer. >> >>>> >> >>>> These patches made it to mainline now, shortly befor 3.6-rc1, and it >> >>>> breaks boot on my AM33xx board. >> >>>> >> >>>> Once I revert 1/3, the board boots again but crashes with the Ooops >> >>>> below. With the entire series reverted, everything works again as >> >>>> expected. Any idea? >> >>>> >> >>>> The upstream commit ids are >> >>>> >> >>>> 11d6ec2e "ARM: OMAP: timer: allow gp timer clock-event to be used on >> >>>> both cpus" >> >>>> 5b4d5bcc "ARM: OMAP4: CPUidle: add synchronization for coupled idle states" >> >>>> b93d70ae "ARM: OMAP4: CPUidle: Open broadcast clock-event device." >> >>> >> >>> I've had boot problems with cpuidle enabled as well, what happens if you disable it? Is the revert still needed in that case? >> >> >> >> To answer my own question: No, the reverts aren't needed if you disable cpuidle. >> > >> > This is really strange since CPUIDLE code is really OMAP4 specific. >> > obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o >> > >> > May be omap2plus build some how the code gets executed on AMXX >> > >> > Can you try below and see if the boot with CPUIDLE enabled goes away on >> > AMXX >> > >> > diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c >> > index ea24174..195e756 100644 >> > --- a/arch/arm/mach-omap2/pm44xx.c >> > +++ b/arch/arm/mach-omap2/pm44xx.c >> > @@ -147,6 +147,9 @@ int __init omap4_pm_init(void) >> > struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm, *l4wkup; >> > struct clockdomain *ducati_clkdm, *l3_2_clkdm, *l4_per_clkdm; >> > >> > + if (!cpu_is_omap44xx()) >> > + return -ENODEV; >> > + >> > if (omap_rev() == OMAP4430_REV_ES1_0) { >> > WARN(1, "Power Management not supported on OMAP4430 ES1.0\n"); >> > return -ENODEV; >> >> That does seem to fix it: >> >> root@beaglebone:~# zcat /proc/config.gz | grep -i cpu_idle >> CONFIG_CPU_IDLE=y >> CONFIG_CPU_IDLE_GOV_LADDER=y >> CONFIG_CPU_IDLE_GOV_MENU=y >> CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED=y >> root@beaglebone:~# zcat /proc/config.gz | grep -i omap4 >> CONFIG_ARCH_OMAP4=y >> CONFIG_MACH_OMAP4_PANDA=y >> # CONFIG_OMAP4_ERRATA_I688 is not set >> # CONFIG_KEYBOARD_OMAP4 is not set >> CONFIG_OMAP4_DSS_HDMI=y >> > > This patch is not required, Without this patch is works for me, > Which is good news.Do you have CPUIDLE enabled in your build when you tested it. Note that CPUIDLE is not enabled by-default in omap2plus build and as I see from Koen's email, he did enable it in his testing. Please confirm that 3.6-rc1 boots fine even with CPUIDLE enabled and we don't need the above mentioned patch. If it is not the case, I can post the fix. Thanks for testing. Regards Santosh -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Op 3 aug. 2012, om 11:42 heeft "Hiremath, Vaibhav" <hvaibhav@ti.com> het volgende geschreven: > On Fri, Aug 03, 2012 at 15:03:07, Koen Kooi wrote: >> >> Op 3 aug. 2012, om 11:27 heeft "Shilimkar, Santosh" <santosh.shilimkar@ti.com> het volgende geschreven: >> >>> On Fri, Aug 3, 2012 at 2:00 PM, Koen Kooi <koen@dominion.thruhere.net> wrote: >>>> >>>> Op 3 aug. 2012, om 09:21 heeft Koen Kooi <koen@dominion.thruhere.net> het volgende geschreven: >>>> >>>>> >>>>> Op 3 aug. 2012, om 09:16 heeft Daniel Mack <zonque@gmail.com> het volgende geschreven: >>>>> >>>>>> On 30.03.2012 15:27, Santosh Shilimkar wrote: >>>>>>> For coupled cpuidle to work when both cpus are active, it needs a global timer >>>>>>> that can handle events for both cpus. This timer is used as the broadcast >>>>>>> clock-event when the per-cpu timer hardware stop in low power states. >>>>>>> Set the cpumask of clockevent_gpt to all cpus, set the rating correctly, and >>>>>>> set the irq to allow the clockevent core to determine the affinity of the >>>>>>> timer. >>>>>> >>>>>> These patches made it to mainline now, shortly befor 3.6-rc1, and it >>>>>> breaks boot on my AM33xx board. >>>>>> >>>>>> Once I revert 1/3, the board boots again but crashes with the Ooops >>>>>> below. With the entire series reverted, everything works again as >>>>>> expected. Any idea? >>>>>> >>>>>> The upstream commit ids are >>>>>> >>>>>> 11d6ec2e "ARM: OMAP: timer: allow gp timer clock-event to be used on >>>>>> both cpus" >>>>>> 5b4d5bcc "ARM: OMAP4: CPUidle: add synchronization for coupled idle states" >>>>>> b93d70ae "ARM: OMAP4: CPUidle: Open broadcast clock-event device." >>>>> >>>>> I've had boot problems with cpuidle enabled as well, what happens if you disable it? Is the revert still needed in that case? >>>> >>>> To answer my own question: No, the reverts aren't needed if you disable cpuidle. >>> >>> This is really strange since CPUIDLE code is really OMAP4 specific. >>> obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o >>> >>> May be omap2plus build some how the code gets executed on AMXX >>> >>> Can you try below and see if the boot with CPUIDLE enabled goes away on >>> AMXX >>> >>> diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c >>> index ea24174..195e756 100644 >>> --- a/arch/arm/mach-omap2/pm44xx.c >>> +++ b/arch/arm/mach-omap2/pm44xx.c >>> @@ -147,6 +147,9 @@ int __init omap4_pm_init(void) >>> struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm, *l4wkup; >>> struct clockdomain *ducati_clkdm, *l3_2_clkdm, *l4_per_clkdm; >>> >>> + if (!cpu_is_omap44xx()) >>> + return -ENODEV; >>> + >>> if (omap_rev() == OMAP4430_REV_ES1_0) { >>> WARN(1, "Power Management not supported on OMAP4430 ES1.0\n"); >>> return -ENODEV; >> >> That does seem to fix it: >> >> root@beaglebone:~# zcat /proc/config.gz | grep -i cpu_idle >> CONFIG_CPU_IDLE=y >> CONFIG_CPU_IDLE_GOV_LADDER=y >> CONFIG_CPU_IDLE_GOV_MENU=y >> CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED=y >> root@beaglebone:~# zcat /proc/config.gz | grep -i omap4 >> CONFIG_ARCH_OMAP4=y >> CONFIG_MACH_OMAP4_PANDA=y >> # CONFIG_OMAP4_ERRATA_I688 is not set >> # CONFIG_KEYBOARD_OMAP4 is not set >> CONFIG_OMAP4_DSS_HDMI=y >> > > This patch is not required, Without this patch is works for me, I just retested and I don't need Santosh' patch, booting with cpuidle enable works now, after refreshing your patchset (and dropping the rtc commit, it conflicts with the other rtc patches out there). > > [root@arago /]# cat /proc/version > Linux version 3.6.0-rc1-next-20120803-00010-g5f6bf0f (a0393758@psplinux064) (gcc version 4.5.3 20110311 (prerelease) (GCC) ) #1 SMP Fri Aug 3 15:06:57 IST 2012 > [root@arago /]# > > > > Do you have below patch?? > ARM: OMAP: cpu: Make cpu_class_is_omap2 true for all non-omap1 platforms > > > Also I have pushed branch (based on linux-next/master) to > https://github.com/hvaibhav/am335x-linux/tree/am335x-linux-next-master Thanks! Ajays USB work and AnilKumar's pinctrl work are there as branches, any plans to add da8xx-fb, rtc and networking branches? As you can see from the cpsw patches, they were impossible to test because the davinci_mdio ones were missing. regards, Koen-- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Aug 3, 2012 at 3:34 PM, Koen Kooi <koen@dominion.thruhere.net> wrote: > > Op 3 aug. 2012, om 11:42 heeft "Hiremath, Vaibhav" <hvaibhav@ti.com> het volgende geschreven: > >> On Fri, Aug 03, 2012 at 15:03:07, Koen Kooi wrote: >>> >>> Op 3 aug. 2012, om 11:27 heeft "Shilimkar, Santosh" <santosh.shilimkar@ti.com> het volgende geschreven: >>> >>>> On Fri, Aug 3, 2012 at 2:00 PM, Koen Kooi <koen@dominion.thruhere.net> wrote: >>>>> >>>>> Op 3 aug. 2012, om 09:21 heeft Koen Kooi <koen@dominion.thruhere.net> het volgende geschreven: >>>>> >>>>>> >>>>>> Op 3 aug. 2012, om 09:16 heeft Daniel Mack <zonque@gmail.com> het volgende geschreven: >>>>>> >>>>>>> On 30.03.2012 15:27, Santosh Shilimkar wrote: >>>>>>>> For coupled cpuidle to work when both cpus are active, it needs a global timer >>>>>>>> that can handle events for both cpus. This timer is used as the broadcast >>>>>>>> clock-event when the per-cpu timer hardware stop in low power states. >>>>>>>> Set the cpumask of clockevent_gpt to all cpus, set the rating correctly, and >>>>>>>> set the irq to allow the clockevent core to determine the affinity of the >>>>>>>> timer. >>>>>>> >>>>>>> These patches made it to mainline now, shortly befor 3.6-rc1, and it >>>>>>> breaks boot on my AM33xx board. >>>>>>> >>>>>>> Once I revert 1/3, the board boots again but crashes with the Ooops >>>>>>> below. With the entire series reverted, everything works again as >>>>>>> expected. Any idea? >>>>>>> >>>>>>> The upstream commit ids are >>>>>>> >>>>>>> 11d6ec2e "ARM: OMAP: timer: allow gp timer clock-event to be used on >>>>>>> both cpus" >>>>>>> 5b4d5bcc "ARM: OMAP4: CPUidle: add synchronization for coupled idle states" >>>>>>> b93d70ae "ARM: OMAP4: CPUidle: Open broadcast clock-event device." >>>>>> >>>>>> I've had boot problems with cpuidle enabled as well, what happens if you disable it? Is the revert still needed in that case? >>>>> >>>>> To answer my own question: No, the reverts aren't needed if you disable cpuidle. >>>> >>>> This is really strange since CPUIDLE code is really OMAP4 specific. >>>> obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o >>>> >>>> May be omap2plus build some how the code gets executed on AMXX >>>> >>>> Can you try below and see if the boot with CPUIDLE enabled goes away on >>>> AMXX >>>> >>>> diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c >>>> index ea24174..195e756 100644 >>>> --- a/arch/arm/mach-omap2/pm44xx.c >>>> +++ b/arch/arm/mach-omap2/pm44xx.c >>>> @@ -147,6 +147,9 @@ int __init omap4_pm_init(void) >>>> struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm, *l4wkup; >>>> struct clockdomain *ducati_clkdm, *l3_2_clkdm, *l4_per_clkdm; >>>> >>>> + if (!cpu_is_omap44xx()) >>>> + return -ENODEV; >>>> + >>>> if (omap_rev() == OMAP4430_REV_ES1_0) { >>>> WARN(1, "Power Management not supported on OMAP4430 ES1.0\n"); >>>> return -ENODEV; >>> >>> That does seem to fix it: >>> >>> root@beaglebone:~# zcat /proc/config.gz | grep -i cpu_idle >>> CONFIG_CPU_IDLE=y >>> CONFIG_CPU_IDLE_GOV_LADDER=y >>> CONFIG_CPU_IDLE_GOV_MENU=y >>> CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED=y >>> root@beaglebone:~# zcat /proc/config.gz | grep -i omap4 >>> CONFIG_ARCH_OMAP4=y >>> CONFIG_MACH_OMAP4_PANDA=y >>> # CONFIG_OMAP4_ERRATA_I688 is not set >>> # CONFIG_KEYBOARD_OMAP4 is not set >>> CONFIG_OMAP4_DSS_HDMI=y >>> >> >> This patch is not required, Without this patch is works for me, > > I just retested and I don't need Santosh' patch, booting with cpuidle enable works now, after refreshing your patchset (and dropping the rtc commit, it conflicts with the other rtc patches out there). > Thanks Koen for confirming. That means the issues was coming from additional patching on top of 3.6-rc1 where some patches were not refreshed for AMXX. Regards Santosh Regards Santosh -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Aug 03, 2012 at 15:34:25, Koen Kooi wrote: > > Op 3 aug. 2012, om 11:42 heeft "Hiremath, Vaibhav" <hvaibhav@ti.com> het volgende geschreven: > > > On Fri, Aug 03, 2012 at 15:03:07, Koen Kooi wrote: > >> > >> Op 3 aug. 2012, om 11:27 heeft "Shilimkar, Santosh" <santosh.shilimkar@ti.com> het volgende geschreven: > >> > >>> On Fri, Aug 3, 2012 at 2:00 PM, Koen Kooi <koen@dominion.thruhere.net> wrote: > >>>> > >>>> Op 3 aug. 2012, om 09:21 heeft Koen Kooi <koen@dominion.thruhere.net> het volgende geschreven: > >>>> > >>>>> > >>>>> Op 3 aug. 2012, om 09:16 heeft Daniel Mack <zonque@gmail.com> het volgende geschreven: > >>>>> > >>>>>> On 30.03.2012 15:27, Santosh Shilimkar wrote: > >>>>>>> For coupled cpuidle to work when both cpus are active, it needs a global timer > >>>>>>> that can handle events for both cpus. This timer is used as the broadcast > >>>>>>> clock-event when the per-cpu timer hardware stop in low power states. > >>>>>>> Set the cpumask of clockevent_gpt to all cpus, set the rating correctly, and > >>>>>>> set the irq to allow the clockevent core to determine the affinity of the > >>>>>>> timer. > >>>>>> > >>>>>> These patches made it to mainline now, shortly befor 3.6-rc1, and it > >>>>>> breaks boot on my AM33xx board. > >>>>>> > >>>>>> Once I revert 1/3, the board boots again but crashes with the Ooops > >>>>>> below. With the entire series reverted, everything works again as > >>>>>> expected. Any idea? > >>>>>> > >>>>>> The upstream commit ids are > >>>>>> > >>>>>> 11d6ec2e "ARM: OMAP: timer: allow gp timer clock-event to be used on > >>>>>> both cpus" > >>>>>> 5b4d5bcc "ARM: OMAP4: CPUidle: add synchronization for coupled idle states" > >>>>>> b93d70ae "ARM: OMAP4: CPUidle: Open broadcast clock-event device." > >>>>> > >>>>> I've had boot problems with cpuidle enabled as well, what happens if you disable it? Is the revert still needed in that case? > >>>> > >>>> To answer my own question: No, the reverts aren't needed if you disable cpuidle. > >>> > >>> This is really strange since CPUIDLE code is really OMAP4 specific. > >>> obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o > >>> > >>> May be omap2plus build some how the code gets executed on AMXX > >>> > >>> Can you try below and see if the boot with CPUIDLE enabled goes away on > >>> AMXX > >>> > >>> diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c > >>> index ea24174..195e756 100644 > >>> --- a/arch/arm/mach-omap2/pm44xx.c > >>> +++ b/arch/arm/mach-omap2/pm44xx.c > >>> @@ -147,6 +147,9 @@ int __init omap4_pm_init(void) > >>> struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm, *l4wkup; > >>> struct clockdomain *ducati_clkdm, *l3_2_clkdm, *l4_per_clkdm; > >>> > >>> + if (!cpu_is_omap44xx()) > >>> + return -ENODEV; > >>> + > >>> if (omap_rev() == OMAP4430_REV_ES1_0) { > >>> WARN(1, "Power Management not supported on OMAP4430 ES1.0\n"); > >>> return -ENODEV; > >> > >> That does seem to fix it: > >> > >> root@beaglebone:~# zcat /proc/config.gz | grep -i cpu_idle > >> CONFIG_CPU_IDLE=y > >> CONFIG_CPU_IDLE_GOV_LADDER=y > >> CONFIG_CPU_IDLE_GOV_MENU=y > >> CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED=y > >> root@beaglebone:~# zcat /proc/config.gz | grep -i omap4 > >> CONFIG_ARCH_OMAP4=y > >> CONFIG_MACH_OMAP4_PANDA=y > >> # CONFIG_OMAP4_ERRATA_I688 is not set > >> # CONFIG_KEYBOARD_OMAP4 is not set > >> CONFIG_OMAP4_DSS_HDMI=y > >> > > > > This patch is not required, Without this patch is works for me, > > I just retested and I don't need Santosh' patch, booting with cpuidle enable works now, after refreshing your patchset (and dropping the rtc commit, it conflicts with the other rtc patches out there). > Thanks for conforming Koen. > > > > [root@arago /]# cat /proc/version > > Linux version 3.6.0-rc1-next-20120803-00010-g5f6bf0f (a0393758@psplinux064) (gcc version 4.5.3 20110311 (prerelease) (GCC) ) #1 SMP Fri Aug 3 15:06:57 IST 2012 > > [root@arago /]# > > > > > > > > Do you have below patch?? > > ARM: OMAP: cpu: Make cpu_class_is_omap2 true for all non-omap1 platforms > > > > > > Also I have pushed branch (based on linux-next/master) to > > https://github.com/hvaibhav/am335x-linux/tree/am335x-linux-next-master > > Thanks! Ajays USB work and AnilKumar's pinctrl work are there as branches, any plans to add da8xx-fb, rtc and networking branches? As you can see from the cpsw patches, they were impossible to test because the davinci_mdio ones were missing. > Yes that's the plan, I am in the process of updating it. Hopefully I will have branch for each major module. Thanks, Vaibhav -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Aug 03, 2012 at 15:18:15, Shilimkar, Santosh wrote: > On Fri, Aug 3, 2012 at 3:12 PM, Hiremath, Vaibhav <hvaibhav@ti.com> wrote: > > On Fri, Aug 03, 2012 at 15:03:07, Koen Kooi wrote: > >> > >> Op 3 aug. 2012, om 11:27 heeft "Shilimkar, Santosh" <santosh.shilimkar@ti.com> het volgende geschreven: > >> > >> > On Fri, Aug 3, 2012 at 2:00 PM, Koen Kooi <koen@dominion.thruhere.net> wrote: > >> >> > >> >> Op 3 aug. 2012, om 09:21 heeft Koen Kooi <koen@dominion.thruhere.net> het volgende geschreven: > >> >> > >> >>> > >> >>> Op 3 aug. 2012, om 09:16 heeft Daniel Mack <zonque@gmail.com> het volgende geschreven: > >> >>> > >> >>>> On 30.03.2012 15:27, Santosh Shilimkar wrote: > >> >>>>> For coupled cpuidle to work when both cpus are active, it needs a global timer > >> >>>>> that can handle events for both cpus. This timer is used as the broadcast > >> >>>>> clock-event when the per-cpu timer hardware stop in low power states. > >> >>>>> Set the cpumask of clockevent_gpt to all cpus, set the rating correctly, and > >> >>>>> set the irq to allow the clockevent core to determine the affinity of the > >> >>>>> timer. > >> >>>> > >> >>>> These patches made it to mainline now, shortly befor 3.6-rc1, and it > >> >>>> breaks boot on my AM33xx board. > >> >>>> > >> >>>> Once I revert 1/3, the board boots again but crashes with the Ooops > >> >>>> below. With the entire series reverted, everything works again as > >> >>>> expected. Any idea? > >> >>>> > >> >>>> The upstream commit ids are > >> >>>> > >> >>>> 11d6ec2e "ARM: OMAP: timer: allow gp timer clock-event to be used on > >> >>>> both cpus" > >> >>>> 5b4d5bcc "ARM: OMAP4: CPUidle: add synchronization for coupled idle states" > >> >>>> b93d70ae "ARM: OMAP4: CPUidle: Open broadcast clock-event device." > >> >>> > >> >>> I've had boot problems with cpuidle enabled as well, what happens if you disable it? Is the revert still needed in that case? > >> >> > >> >> To answer my own question: No, the reverts aren't needed if you disable cpuidle. > >> > > >> > This is really strange since CPUIDLE code is really OMAP4 specific. > >> > obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o > >> > > >> > May be omap2plus build some how the code gets executed on AMXX > >> > > >> > Can you try below and see if the boot with CPUIDLE enabled goes away on > >> > AMXX > >> > > >> > diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c > >> > index ea24174..195e756 100644 > >> > --- a/arch/arm/mach-omap2/pm44xx.c > >> > +++ b/arch/arm/mach-omap2/pm44xx.c > >> > @@ -147,6 +147,9 @@ int __init omap4_pm_init(void) > >> > struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm, *l4wkup; > >> > struct clockdomain *ducati_clkdm, *l3_2_clkdm, *l4_per_clkdm; > >> > > >> > + if (!cpu_is_omap44xx()) > >> > + return -ENODEV; > >> > + > >> > if (omap_rev() == OMAP4430_REV_ES1_0) { > >> > WARN(1, "Power Management not supported on OMAP4430 ES1.0\n"); > >> > return -ENODEV; > >> > >> That does seem to fix it: > >> > >> root@beaglebone:~# zcat /proc/config.gz | grep -i cpu_idle > >> CONFIG_CPU_IDLE=y > >> CONFIG_CPU_IDLE_GOV_LADDER=y > >> CONFIG_CPU_IDLE_GOV_MENU=y > >> CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED=y > >> root@beaglebone:~# zcat /proc/config.gz | grep -i omap4 > >> CONFIG_ARCH_OMAP4=y > >> CONFIG_MACH_OMAP4_PANDA=y > >> # CONFIG_OMAP4_ERRATA_I688 is not set > >> # CONFIG_KEYBOARD_OMAP4 is not set > >> CONFIG_OMAP4_DSS_HDMI=y > >> > > > > This patch is not required, Without this patch is works for me, > > > Which is good news.Do you have CPUIDLE enabled in your build when you tested > it. Note that CPUIDLE is not enabled by-default in omap2plus build and as I see > from Koen's email, he did enable it in his testing. > > Please confirm that 3.6-rc1 boots fine even with CPUIDLE enabled and > we don't need > the above mentioned patch. If it is not the case, I can post the fix. > Just FYI, I have also tested with CPUIDLE enabled and it worked for me. Thanks, Vaibhav -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Aug 3, 2012 at 4:02 PM, Hiremath, Vaibhav <hvaibhav@ti.com> wrote: > On Fri, Aug 03, 2012 at 15:18:15, Shilimkar, Santosh wrote: >> On Fri, Aug 3, 2012 at 3:12 PM, Hiremath, Vaibhav <hvaibhav@ti.com> wrote: >> > On Fri, Aug 03, 2012 at 15:03:07, Koen Kooi wrote: >> >> >> >> Op 3 aug. 2012, om 11:27 heeft "Shilimkar, Santosh" <santosh.shilimkar@ti.com> het volgende geschreven: >> >> >> >> > On Fri, Aug 3, 2012 at 2:00 PM, Koen Kooi <koen@dominion.thruhere.net> wrote: >> >> >> >> >> >> Op 3 aug. 2012, om 09:21 heeft Koen Kooi <koen@dominion.thruhere.net> het volgende geschreven: >> >> >> >> >> >>> >> >> >>> Op 3 aug. 2012, om 09:16 heeft Daniel Mack <zonque@gmail.com> het volgende geschreven: >> >> >>> >> >> >>>> On 30.03.2012 15:27, Santosh Shilimkar wrote: >> >> >>>>> For coupled cpuidle to work when both cpus are active, it needs a global timer >> >> >>>>> that can handle events for both cpus. This timer is used as the broadcast >> >> >>>>> clock-event when the per-cpu timer hardware stop in low power states. >> >> >>>>> Set the cpumask of clockevent_gpt to all cpus, set the rating correctly, and >> >> >>>>> set the irq to allow the clockevent core to determine the affinity of the >> >> >>>>> timer. >> >> >>>> >> >> >>>> These patches made it to mainline now, shortly befor 3.6-rc1, and it >> >> >>>> breaks boot on my AM33xx board. >> >> >>>> >> >> >>>> Once I revert 1/3, the board boots again but crashes with the Ooops >> >> >>>> below. With the entire series reverted, everything works again as >> >> >>>> expected. Any idea? >> >> >>>> >> >> >>>> The upstream commit ids are >> >> >>>> >> >> >>>> 11d6ec2e "ARM: OMAP: timer: allow gp timer clock-event to be used on >> >> >>>> both cpus" >> >> >>>> 5b4d5bcc "ARM: OMAP4: CPUidle: add synchronization for coupled idle states" >> >> >>>> b93d70ae "ARM: OMAP4: CPUidle: Open broadcast clock-event device." >> >> >>> >> >> >>> I've had boot problems with cpuidle enabled as well, what happens if you disable it? Is the revert still needed in that case? >> >> >> >> >> >> To answer my own question: No, the reverts aren't needed if you disable cpuidle. >> >> > >> >> > This is really strange since CPUIDLE code is really OMAP4 specific. >> >> > obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o >> >> > >> >> > May be omap2plus build some how the code gets executed on AMXX >> >> > >> >> > Can you try below and see if the boot with CPUIDLE enabled goes away on >> >> > AMXX >> >> > >> >> > diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c >> >> > index ea24174..195e756 100644 >> >> > --- a/arch/arm/mach-omap2/pm44xx.c >> >> > +++ b/arch/arm/mach-omap2/pm44xx.c >> >> > @@ -147,6 +147,9 @@ int __init omap4_pm_init(void) >> >> > struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm, *l4wkup; >> >> > struct clockdomain *ducati_clkdm, *l3_2_clkdm, *l4_per_clkdm; >> >> > >> >> > + if (!cpu_is_omap44xx()) >> >> > + return -ENODEV; >> >> > + >> >> > if (omap_rev() == OMAP4430_REV_ES1_0) { >> >> > WARN(1, "Power Management not supported on OMAP4430 ES1.0\n"); >> >> > return -ENODEV; >> >> >> >> That does seem to fix it: >> >> >> >> root@beaglebone:~# zcat /proc/config.gz | grep -i cpu_idle >> >> CONFIG_CPU_IDLE=y >> >> CONFIG_CPU_IDLE_GOV_LADDER=y >> >> CONFIG_CPU_IDLE_GOV_MENU=y >> >> CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED=y >> >> root@beaglebone:~# zcat /proc/config.gz | grep -i omap4 >> >> CONFIG_ARCH_OMAP4=y >> >> CONFIG_MACH_OMAP4_PANDA=y >> >> # CONFIG_OMAP4_ERRATA_I688 is not set >> >> # CONFIG_KEYBOARD_OMAP4 is not set >> >> CONFIG_OMAP4_DSS_HDMI=y >> >> >> > >> > This patch is not required, Without this patch is works for me, >> > >> Which is good news.Do you have CPUIDLE enabled in your build when you tested >> it. Note that CPUIDLE is not enabled by-default in omap2plus build and as I see >> from Koen's email, he did enable it in his testing. >> >> Please confirm that 3.6-rc1 boots fine even with CPUIDLE enabled and >> we don't need >> the above mentioned patch. If it is not the case, I can post the fix. >> > > Just FYI, I have also tested with CPUIDLE enabled and it worked for me. > Thanks Vaibhav for update. Regards Santosh -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Aug 03, 2012 at 15:44:32, Shilimkar, Santosh wrote: > On Fri, Aug 3, 2012 at 3:34 PM, Koen Kooi <koen@dominion.thruhere.net> wrote: > > > > Op 3 aug. 2012, om 11:42 heeft "Hiremath, Vaibhav" <hvaibhav@ti.com> het volgende geschreven: > > > >> On Fri, Aug 03, 2012 at 15:03:07, Koen Kooi wrote: > >>> > >>> Op 3 aug. 2012, om 11:27 heeft "Shilimkar, Santosh" <santosh.shilimkar@ti.com> het volgende geschreven: > >>> > >>>> On Fri, Aug 3, 2012 at 2:00 PM, Koen Kooi <koen@dominion.thruhere.net> wrote: > >>>>> > >>>>> Op 3 aug. 2012, om 09:21 heeft Koen Kooi <koen@dominion.thruhere.net> het volgende geschreven: > >>>>> > >>>>>> > >>>>>> Op 3 aug. 2012, om 09:16 heeft Daniel Mack <zonque@gmail.com> het volgende geschreven: > >>>>>> > >>>>>>> On 30.03.2012 15:27, Santosh Shilimkar wrote: > >>>>>>>> For coupled cpuidle to work when both cpus are active, it needs a global timer > >>>>>>>> that can handle events for both cpus. This timer is used as the broadcast > >>>>>>>> clock-event when the per-cpu timer hardware stop in low power states. > >>>>>>>> Set the cpumask of clockevent_gpt to all cpus, set the rating correctly, and > >>>>>>>> set the irq to allow the clockevent core to determine the affinity of the > >>>>>>>> timer. > >>>>>>> > >>>>>>> These patches made it to mainline now, shortly befor 3.6-rc1, and it > >>>>>>> breaks boot on my AM33xx board. > >>>>>>> > >>>>>>> Once I revert 1/3, the board boots again but crashes with the Ooops > >>>>>>> below. With the entire series reverted, everything works again as > >>>>>>> expected. Any idea? > >>>>>>> > >>>>>>> The upstream commit ids are > >>>>>>> > >>>>>>> 11d6ec2e "ARM: OMAP: timer: allow gp timer clock-event to be used on > >>>>>>> both cpus" > >>>>>>> 5b4d5bcc "ARM: OMAP4: CPUidle: add synchronization for coupled idle states" > >>>>>>> b93d70ae "ARM: OMAP4: CPUidle: Open broadcast clock-event device." > >>>>>> > >>>>>> I've had boot problems with cpuidle enabled as well, what happens if you disable it? Is the revert still needed in that case? > >>>>> > >>>>> To answer my own question: No, the reverts aren't needed if you disable cpuidle. > >>>> > >>>> This is really strange since CPUIDLE code is really OMAP4 specific. > >>>> obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o > >>>> > >>>> May be omap2plus build some how the code gets executed on AMXX > >>>> > >>>> Can you try below and see if the boot with CPUIDLE enabled goes away on > >>>> AMXX > >>>> > >>>> diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c > >>>> index ea24174..195e756 100644 > >>>> --- a/arch/arm/mach-omap2/pm44xx.c > >>>> +++ b/arch/arm/mach-omap2/pm44xx.c > >>>> @@ -147,6 +147,9 @@ int __init omap4_pm_init(void) > >>>> struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm, *l4wkup; > >>>> struct clockdomain *ducati_clkdm, *l3_2_clkdm, *l4_per_clkdm; > >>>> > >>>> + if (!cpu_is_omap44xx()) > >>>> + return -ENODEV; > >>>> + > >>>> if (omap_rev() == OMAP4430_REV_ES1_0) { > >>>> WARN(1, "Power Management not supported on OMAP4430 ES1.0\n"); > >>>> return -ENODEV; > >>> > >>> That does seem to fix it: > >>> > >>> root@beaglebone:~# zcat /proc/config.gz | grep -i cpu_idle > >>> CONFIG_CPU_IDLE=y > >>> CONFIG_CPU_IDLE_GOV_LADDER=y > >>> CONFIG_CPU_IDLE_GOV_MENU=y > >>> CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED=y > >>> root@beaglebone:~# zcat /proc/config.gz | grep -i omap4 > >>> CONFIG_ARCH_OMAP4=y > >>> CONFIG_MACH_OMAP4_PANDA=y > >>> # CONFIG_OMAP4_ERRATA_I688 is not set > >>> # CONFIG_KEYBOARD_OMAP4 is not set > >>> CONFIG_OMAP4_DSS_HDMI=y > >>> > >> > >> This patch is not required, Without this patch is works for me, > > > > I just retested and I don't need Santosh' patch, booting with cpuidle enable works now, after refreshing your patchset (and dropping the rtc commit, it conflicts with the other rtc patches out there). > > > Thanks Koen for confirming. That means the issues was coming from > additional patching on top of 3.6-rc1 > where some patches were not refreshed for AMXX. > Actually its not that. AM335x needs to be added as part of cpu_class_is_omap2(), without this it gets into issues. The patch has been already submitted to the list, but still not merged by Tony. Thanks, Vaibhav -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
* Hiremath, Vaibhav <hvaibhav@ti.com> [120803 03:34]: > > Actually its not that. > AM335x needs to be added as part of cpu_class_is_omap2(), without this it > gets into issues. > The patch has been already submitted to the list, but still not merged by > Tony. Let's just add it to the list of cpu_class_is_omap2() with a proper patch description for the fix. Then we still need to sort it out properly from common zImage point of view without having to maintain that list. Vaibhav, can you please post your original patch with the description updated for v3.6-rc1? Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index ea24174..195e756 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -147,6 +147,9 @@ int __init omap4_pm_init(void) struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm, *l4wkup; struct clockdomain *ducati_clkdm, *l3_2_clkdm, *l4_per_clkdm; + if (!cpu_is_omap44xx()) + return -ENODEV; + if (omap_rev() == OMAP4430_REV_ES1_0) { WARN(1, "Power Management not supported on OMAP4430 ES1.0\n"); return -ENODEV;