| Message ID | 1343995703-13578-1-git-send-email-javier.martin@vista-silicon.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, Aug 03, 2012 at 02:08:23PM +0200, Javier Martin wrote: > If the mother board version number is odd, emmaprp() for > format conversion + UVC camera will be used. > > Otherwise mx2_camera and m2m-deinterlacer will be registered. > > For both cases Coda video codec is registered. > > Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> This does not apply. Mainline does not have visstrim_deinterlace_init. Sascha > --- > Changes since v1: > - Add error message to emmaprp init function. > > --- > arch/arm/mach-imx/mach-imx27_visstrim_m10.c | 54 ++++++++++++++++++++++++--- > 1 file changed, 49 insertions(+), 5 deletions(-) > > diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c > index 176533e..dbb344a 100644 > --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c > +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c > @@ -49,6 +49,10 @@ > #define OTG_PHY_CS_GPIO (GPIO_PORTF + 17) > #define SDHC1_IRQ IRQ_GPIOB(25) > > +#define VERSION_MASK 0x7 > +#define MOTHERBOARD_SHIFT 4 > +#define EXPBOARD_SHIFT 0 > + > #define MOTHERBOARD_BIT2 (GPIO_PORTD + 31) > #define MOTHERBOARD_BIT1 (GPIO_PORTD + 30) > #define MOTHERBOARD_BIT0 (GPIO_PORTD + 29) > @@ -205,7 +209,7 @@ static struct mx2_camera_platform_data visstrim_camera = { > static phys_addr_t mx2_camera_base __initdata; > #define MX2_CAMERA_BUF_SIZE SZ_8M > > -static void __init visstrim_camera_init(void) > +static void __init visstrim_analog_camera_init(void) > { > struct platform_device *pdev; > int dma; > @@ -442,6 +446,29 @@ static void __init visstrim_deinterlace_init(void) > return; > } > > +/* Emma-PrP for format conversion */ > +static void __init visstrim_emmaprp_init(void) > +{ > + struct platform_device *pdev; > + int dma; > + > + pdev = imx27_add_mx2_emmaprp(); > + if (IS_ERR(pdev)) > + return; > + > + /* > + * Use the same memory area as the analog camera since both > + * devices are, by nature, exclusive. > + */ > + dma = dma_declare_coherent_memory(&pdev->dev, > + mx2_camera_base, mx2_camera_base, > + MX2_CAMERA_BUF_SIZE, > + DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE); > + if (!(dma & DMA_MEMORY_MAP)) { > + pr_err("Failed to declare memory for emmaprp\n"); > + return; > + } > +} > > static void __init visstrim_m10_revision(void) > { > @@ -467,13 +494,14 @@ static void __init visstrim_m10_revision(void) > mo_version |= !gpio_get_value(MOTHERBOARD_BIT0); > > system_rev = 0x27000; > - system_rev |= (mo_version << 4); > - system_rev |= exp_version; > + system_rev |= (mo_version << MOTHERBOARD_SHIFT); > + system_rev |= (exp_version << EXPBOARD_SHIFT); > } > > static void __init visstrim_m10_board_init(void) > { > int ret; > + int mo_version; > > imx27_soc_init(); > visstrim_m10_revision(); > @@ -505,8 +533,24 @@ static void __init visstrim_m10_board_init(void) > platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0, > &iclink_tvp5150, sizeof(iclink_tvp5150)); > gpio_led_register_device(0, &visstrim_m10_led_data); > - visstrim_deinterlace_init(); > - visstrim_camera_init(); > + > + /* Use mother board version to decide what video devices we shall use */ > + mo_version = (system_rev >> MOTHERBOARD_SHIFT) & VERSION_MASK; > + if (mo_version & 0x1) { > + visstrim_emmaprp_init(); > + > + /* > + * Despite not being used, tvp5150 must be > + * powered on to avoid I2C problems. To minimize > + * power consupmtion keep reset enabled. > + */ > + gpio_set_value(TVP5150_PWDN, 1); > + ndelay(1); > + gpio_set_value(TVP5150_RSTN, 0); > + } else { > + visstrim_deinterlace_init(); > + visstrim_analog_camera_init(); > + } > visstrim_coda_init(); > } > > -- > 1.7.9.5 > >
Hi Javier, On Fri, Aug 03, 2012 at 02:08:23PM +0200, Javier Martin wrote: > If the mother board version number is odd, emmaprp() for > format conversion + UVC camera will be used. > > Otherwise mx2_camera and m2m-deinterlacer will be registered. > > For both cases Coda video codec is registered. > > Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> > --- > Changes since v1: > - Add error message to emmaprp init function. > --- ... > +/* Emma-PrP for format conversion */ > +static void __init visstrim_emmaprp_init(void) > +{ > + struct platform_device *pdev; > + int dma; > + > + pdev = imx27_add_mx2_emmaprp(); > + if (IS_ERR(pdev)) > + return; > + > + /* > + * Use the same memory area as the analog camera since both > + * devices are, by nature, exclusive. > + */ > + dma = dma_declare_coherent_memory(&pdev->dev, > + mx2_camera_base, mx2_camera_base, > + MX2_CAMERA_BUF_SIZE, > + DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE); > + if (!(dma & DMA_MEMORY_MAP)) { > + pr_err("Failed to declare memory for emmaprp\n"); > + return; Nitpick: the 'return' is redundant here. > + } > +} baruch
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index 176533e..dbb344a 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -49,6 +49,10 @@ #define OTG_PHY_CS_GPIO (GPIO_PORTF + 17) #define SDHC1_IRQ IRQ_GPIOB(25) +#define VERSION_MASK 0x7 +#define MOTHERBOARD_SHIFT 4 +#define EXPBOARD_SHIFT 0 + #define MOTHERBOARD_BIT2 (GPIO_PORTD + 31) #define MOTHERBOARD_BIT1 (GPIO_PORTD + 30) #define MOTHERBOARD_BIT0 (GPIO_PORTD + 29) @@ -205,7 +209,7 @@ static struct mx2_camera_platform_data visstrim_camera = { static phys_addr_t mx2_camera_base __initdata; #define MX2_CAMERA_BUF_SIZE SZ_8M -static void __init visstrim_camera_init(void) +static void __init visstrim_analog_camera_init(void) { struct platform_device *pdev; int dma; @@ -442,6 +446,29 @@ static void __init visstrim_deinterlace_init(void) return; } +/* Emma-PrP for format conversion */ +static void __init visstrim_emmaprp_init(void) +{ + struct platform_device *pdev; + int dma; + + pdev = imx27_add_mx2_emmaprp(); + if (IS_ERR(pdev)) + return; + + /* + * Use the same memory area as the analog camera since both + * devices are, by nature, exclusive. + */ + dma = dma_declare_coherent_memory(&pdev->dev, + mx2_camera_base, mx2_camera_base, + MX2_CAMERA_BUF_SIZE, + DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE); + if (!(dma & DMA_MEMORY_MAP)) { + pr_err("Failed to declare memory for emmaprp\n"); + return; + } +} static void __init visstrim_m10_revision(void) { @@ -467,13 +494,14 @@ static void __init visstrim_m10_revision(void) mo_version |= !gpio_get_value(MOTHERBOARD_BIT0); system_rev = 0x27000; - system_rev |= (mo_version << 4); - system_rev |= exp_version; + system_rev |= (mo_version << MOTHERBOARD_SHIFT); + system_rev |= (exp_version << EXPBOARD_SHIFT); } static void __init visstrim_m10_board_init(void) { int ret; + int mo_version; imx27_soc_init(); visstrim_m10_revision(); @@ -505,8 +533,24 @@ static void __init visstrim_m10_board_init(void) platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0, &iclink_tvp5150, sizeof(iclink_tvp5150)); gpio_led_register_device(0, &visstrim_m10_led_data); - visstrim_deinterlace_init(); - visstrim_camera_init(); + + /* Use mother board version to decide what video devices we shall use */ + mo_version = (system_rev >> MOTHERBOARD_SHIFT) & VERSION_MASK; + if (mo_version & 0x1) { + visstrim_emmaprp_init(); + + /* + * Despite not being used, tvp5150 must be + * powered on to avoid I2C problems. To minimize + * power consupmtion keep reset enabled. + */ + gpio_set_value(TVP5150_PWDN, 1); + ndelay(1); + gpio_set_value(TVP5150_RSTN, 0); + } else { + visstrim_deinterlace_init(); + visstrim_analog_camera_init(); + } visstrim_coda_init(); }
If the mother board version number is odd, emmaprp() for format conversion + UVC camera will be used. Otherwise mx2_camera and m2m-deinterlacer will be registered. For both cases Coda video codec is registered. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> --- Changes since v1: - Add error message to emmaprp init function. --- arch/arm/mach-imx/mach-imx27_visstrim_m10.c | 54 ++++++++++++++++++++++++--- 1 file changed, 49 insertions(+), 5 deletions(-)