| Message ID | 1343997486-710-4-git-send-email-sourav.poddar@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Op 3 aug. 2012, om 14:38 heeft Sourav Poddar <sourav.poddar@ti.com> het volgende geschreven: > Add keypad data node in omap5 device tree file. > Also fill the device tree binding parameters > with the required value in "omap5-evm" dts file. > > Tested on omap5430 evm with 3.5 custom kernel. > > Cc: Benoit Cousson <b-cousson@ti.com> > Cc: Felipe Balbi <balbi@ti.com> > Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> > Acked-by: Felipe Balbi <balbi@ti.com> > Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> > --- > arch/arm/boot/dts/omap5-evm.dts | 12 ++++++++++++ > arch/arm/boot/dts/omap5.dtsi | 5 +++++ > 2 files changed, 17 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts > index 45a8aeb..09fe941 100644 > --- a/arch/arm/boot/dts/omap5-evm.dts > +++ b/arch/arm/boot/dts/omap5-evm.dts > @@ -17,6 +17,18 @@ > device_type = "memory"; > reg = <0x80000000 0x40000000>; /* 1 GB */ > }; > + > + keypad { > + keypad,num-rows = <8>; > + keypad,num-columns = <8>; > + linux,keymap = < 0x02020073 > + 0x02030072 > + 0x020400e7 > + 0x02050066 > + 0x0206006b > + 0x020700d9 >; > + linux,input-no-autorepeat; > + }; This not a criticism on your patch, but a generic question about DT: Is there no way to have nice constants for keys like we have in the kernel, like KEY_POWER, KEY_UP, etc? If no, does DT allow comments so I can look at a dts and see which keycodes are mapped instead of having to dig up the sources? regards, Koen-- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On Fri, Aug 3, 2012 at 6:20 PM, Koen Kooi <koen@dominion.thruhere.net> wrote: > > Op 3 aug. 2012, om 14:38 heeft Sourav Poddar <sourav.poddar@ti.com> het volgende geschreven: > >> Add keypad data node in omap5 device tree file. >> Also fill the device tree binding parameters >> with the required value in "omap5-evm" dts file. >> >> Tested on omap5430 evm with 3.5 custom kernel. >> >> Cc: Benoit Cousson <b-cousson@ti.com> >> Cc: Felipe Balbi <balbi@ti.com> >> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> >> Acked-by: Felipe Balbi <balbi@ti.com> >> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> >> --- >> arch/arm/boot/dts/omap5-evm.dts | 12 ++++++++++++ >> arch/arm/boot/dts/omap5.dtsi | 5 +++++ >> 2 files changed, 17 insertions(+), 0 deletions(-) >> >> diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts >> index 45a8aeb..09fe941 100644 >> --- a/arch/arm/boot/dts/omap5-evm.dts >> +++ b/arch/arm/boot/dts/omap5-evm.dts >> @@ -17,6 +17,18 @@ >> device_type = "memory"; >> reg = <0x80000000 0x40000000>; /* 1 GB */ >> }; >> + >> + keypad { >> + keypad,num-rows = <8>; >> + keypad,num-columns = <8>; >> + linux,keymap = < 0x02020073 >> + 0x02030072 >> + 0x020400e7 >> + 0x02050066 >> + 0x0206006b >> + 0x020700d9 >; >> + linux,input-no-autorepeat; >> + }; > > This not a criticism on your patch, but a generic question about DT: Is there no way to have nice constants for keys like we have in the kernel, like KEY_POWER, KEY_UP, etc? There is way, something like this .. key_C { keypad,row = <2>; keypad,column = <1>; linux,code = <46>; }; But its not the preferred approach mainly because of the fact that it is too big. So suppose, if we have 100 key codes, we will have 400 -500 lines of code in our dts file for the mapping only. If no, does DT allow comments so I can look at a dts and see which keycodes are mapped instead of having to dig up the sources? Yes, comments are allowed and seems to be better option to do. ~Sourav > > regards, > > Koen -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Op 3 aug. 2012, om 14:38 heeft Sourav Poddar <sourav.poddar@ti.com> het volgende geschreven: > Add keypad data node in omap5 device tree file. > Also fill the device tree binding parameters > with the required value in "omap5-evm" dts file. > > Tested on omap5430 evm with 3.5 custom kernel. > > Cc: Benoit Cousson <b-cousson@ti.com> > Cc: Felipe Balbi <balbi@ti.com> > Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> > Acked-by: Felipe Balbi <balbi@ti.com> > Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> > --- > arch/arm/boot/dts/omap5-evm.dts | 12 ++++++++++++ > arch/arm/boot/dts/omap5.dtsi | 5 +++++ > 2 files changed, 17 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts > index 45a8aeb..09fe941 100644 > --- a/arch/arm/boot/dts/omap5-evm.dts > +++ b/arch/arm/boot/dts/omap5-evm.dts > @@ -17,6 +17,18 @@ > device_type = "memory"; > reg = <0x80000000 0x40000000>; /* 1 GB */ > }; > + > + keypad { > + keypad,num-rows = <8>; > + keypad,num-columns = <8>; > + linux,keymap = < 0x02020073 > + 0x02030072 > + 0x020400e7 > + 0x02050066 > + 0x0206006b > + 0x020700d9 >; > + linux,input-no-autorepeat; > + }; Again not a coment on your patch, but on DT: If DT bindings must be OS independent, what then, is that linux keycode doing there? regards, Koen -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Koen, On Tue, Aug 7, 2012 at 6:24 PM, Koen Kooi <koen@dominion.thruhere.net> wrote: > > Op 3 aug. 2012, om 14:38 heeft Sourav Poddar <sourav.poddar@ti.com> het volgende geschreven: > >> Add keypad data node in omap5 device tree file. >> Also fill the device tree binding parameters >> with the required value in "omap5-evm" dts file. >> >> Tested on omap5430 evm with 3.5 custom kernel. >> >> Cc: Benoit Cousson <b-cousson@ti.com> >> Cc: Felipe Balbi <balbi@ti.com> >> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> >> Acked-by: Felipe Balbi <balbi@ti.com> >> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> >> --- >> arch/arm/boot/dts/omap5-evm.dts | 12 ++++++++++++ >> arch/arm/boot/dts/omap5.dtsi | 5 +++++ >> 2 files changed, 17 insertions(+), 0 deletions(-) >> >> diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts >> index 45a8aeb..09fe941 100644 >> --- a/arch/arm/boot/dts/omap5-evm.dts >> +++ b/arch/arm/boot/dts/omap5-evm.dts >> @@ -17,6 +17,18 @@ >> device_type = "memory"; >> reg = <0x80000000 0x40000000>; /* 1 GB */ >> }; >> + >> + keypad { >> + keypad,num-rows = <8>; >> + keypad,num-columns = <8>; >> + linux,keymap = < 0x02020073 >> + 0x02030072 >> + 0x020400e7 >> + 0x02050066 >> + 0x0206006b >> + 0x020700d9 >; >> + linux,input-no-autorepeat; >> + }; > > Again not a coment on your patch, but on DT: > > If DT bindings must be OS independent, what then, is that linux keycode doing there? > Currently, for all matrix connected keyboards the keymap are defined in the scope of the linux key code since that is a stable and standardized interface at this time. For the above reason , computation of the keymap uses linux keycode row << 24 | column << 16 | linux-key-code I think this is the primary reason for keeping "linux" prefix with this property. > regards, > > Koen > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts index 45a8aeb..09fe941 100644 --- a/arch/arm/boot/dts/omap5-evm.dts +++ b/arch/arm/boot/dts/omap5-evm.dts @@ -17,6 +17,18 @@ device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; + + keypad { + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = < 0x02020073 + 0x02030072 + 0x020400e7 + 0x02050066 + 0x0206006b + 0x020700d9 >; + linux,input-no-autorepeat; + }; }; &i2c4 { diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 6b68dfe..c38b823 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -216,4 +216,9 @@ clock-frequency = <48000000>; }; }; + + keypad { + compatible = "ti,omap4-keypad"; + ti,hwmods = "kbd"; + }; };