Message ID | 1344380196-9488-2-git-send-email-crope@iki.fi (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Wed, Aug 8, 2012 at 1:56 AM, Antti Palosaari <crope@iki.fi> wrote: > diff --git a/drivers/media/dvb/dvb-usb-v2/dvb_usb_urb.c b/drivers/media/dvb/dvb-usb-v2/dvb_usb_urb.c > index 5f5bdd0..0431bee 100644 > --- a/drivers/media/dvb/dvb-usb-v2/dvb_usb_urb.c > +++ b/drivers/media/dvb/dvb-usb-v2/dvb_usb_urb.c > @@ -37,10 +36,8 @@ int dvb_usbv2_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, u8 *rbuf, > if (ret < 0) > return ret; > > -#ifdef DVB_USB_XFER_DEBUG > - print_hex_dump(KERN_DEBUG, KBUILD_MODNAME ": >>> ", DUMP_PREFIX_NONE, > - 32, 1, wbuf, wlen, 0); > -#endif > + dev_dbg(&d->udev->dev, "%s: >>> %*ph\n", __func__, wlen, wbuf); > + > ret = usb_bulk_msg(d->udev, usb_sndbulkpipe(d->udev, > d->props->generic_bulk_ctrl_endpoint), wbuf, wlen, > &actual_length, 2000); > @@ -64,11 +61,8 @@ int dvb_usbv2_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, u8 *rbuf, > dev_err(&d->udev->dev, "%s: 2nd usb_bulk_msg() " \ > "failed=%d\n", KBUILD_MODNAME, ret); > > -#ifdef DVB_USB_XFER_DEBUG > - print_hex_dump(KERN_DEBUG, KBUILD_MODNAME ": <<< ", > - DUMP_PREFIX_NONE, 32, 1, rbuf, actual_length, > - 0); > -#endif > + dev_dbg(&d->udev->dev, "%s: <<< %*ph\n", __func__, > + actual_length, rbuf); > } > Antti, I didn't check how long buffer could be in above cases, but be aware that %*ph prints up to 64 bytes only. Is it enough here?
On 08/08/2012 07:16 AM, Andy Shevchenko wrote: > On Wed, Aug 8, 2012 at 1:56 AM, Antti Palosaari <crope@iki.fi> wrote: >> diff --git a/drivers/media/dvb/dvb-usb-v2/dvb_usb_urb.c b/drivers/media/dvb/dvb-usb-v2/dvb_usb_urb.c >> index 5f5bdd0..0431bee 100644 >> --- a/drivers/media/dvb/dvb-usb-v2/dvb_usb_urb.c >> +++ b/drivers/media/dvb/dvb-usb-v2/dvb_usb_urb.c > >> @@ -37,10 +36,8 @@ int dvb_usbv2_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, u8 *rbuf, >> if (ret < 0) >> return ret; >> >> -#ifdef DVB_USB_XFER_DEBUG >> - print_hex_dump(KERN_DEBUG, KBUILD_MODNAME ": >>> ", DUMP_PREFIX_NONE, >> - 32, 1, wbuf, wlen, 0); >> -#endif >> + dev_dbg(&d->udev->dev, "%s: >>> %*ph\n", __func__, wlen, wbuf); >> + >> ret = usb_bulk_msg(d->udev, usb_sndbulkpipe(d->udev, >> d->props->generic_bulk_ctrl_endpoint), wbuf, wlen, >> &actual_length, 2000); >> @@ -64,11 +61,8 @@ int dvb_usbv2_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, u8 *rbuf, >> dev_err(&d->udev->dev, "%s: 2nd usb_bulk_msg() " \ >> "failed=%d\n", KBUILD_MODNAME, ret); >> >> -#ifdef DVB_USB_XFER_DEBUG >> - print_hex_dump(KERN_DEBUG, KBUILD_MODNAME ": <<< ", >> - DUMP_PREFIX_NONE, 32, 1, rbuf, actual_length, >> - 0); >> -#endif >> + dev_dbg(&d->udev->dev, "%s: <<< %*ph\n", __func__, >> + actual_length, rbuf); >> } >> > Antti, I didn't check how long buffer could be in above cases, but be > aware that %*ph prints up to 64 bytes only. Is it enough here? It is correct behavior. I saw from the LKML patch limit was selected using min_t() not causing any other side effect than cut print length. For some cases it could be more than 64 here, likely for the firmware download packed. I suspect, situation where control message is longer than 64 byte does not exist in real life as USB1.1 BULK max is 64. And even such case exists, we are not interested those not printed bytes. regards Antti
diff --git a/drivers/media/dvb/dvb-usb-v2/dvb_usb_urb.c b/drivers/media/dvb/dvb-usb-v2/dvb_usb_urb.c index 5f5bdd0..0431bee 100644 --- a/drivers/media/dvb/dvb-usb-v2/dvb_usb_urb.c +++ b/drivers/media/dvb/dvb-usb-v2/dvb_usb_urb.c @@ -21,7 +21,6 @@ #include "dvb_usb_common.h" -#undef DVB_USB_XFER_DEBUG int dvb_usbv2_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) { @@ -37,10 +36,8 @@ int dvb_usbv2_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, u8 *rbuf, if (ret < 0) return ret; -#ifdef DVB_USB_XFER_DEBUG - print_hex_dump(KERN_DEBUG, KBUILD_MODNAME ": >>> ", DUMP_PREFIX_NONE, - 32, 1, wbuf, wlen, 0); -#endif + dev_dbg(&d->udev->dev, "%s: >>> %*ph\n", __func__, wlen, wbuf); + ret = usb_bulk_msg(d->udev, usb_sndbulkpipe(d->udev, d->props->generic_bulk_ctrl_endpoint), wbuf, wlen, &actual_length, 2000); @@ -64,11 +61,8 @@ int dvb_usbv2_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, u8 *rbuf, dev_err(&d->udev->dev, "%s: 2nd usb_bulk_msg() " \ "failed=%d\n", KBUILD_MODNAME, ret); -#ifdef DVB_USB_XFER_DEBUG - print_hex_dump(KERN_DEBUG, KBUILD_MODNAME ": <<< ", - DUMP_PREFIX_NONE, 32, 1, rbuf, actual_length, - 0); -#endif + dev_dbg(&d->udev->dev, "%s: <<< %*ph\n", __func__, + actual_length, rbuf); } mutex_unlock(&d->usb_mutex);
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Antti Palosaari <crope@iki.fi> --- drivers/media/dvb/dvb-usb-v2/dvb_usb_urb.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-)