Message ID | 1344417034-30175-2-git-send-email-jason77.wang@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Hi Hui, ? 2012-8-8???5:10?Hui Wang <jason77.wang@gmail.com> ??? > The irq_to_gpio() is old, most platforms use GENERIC_GPIO framework > and don't support this API anymore. > > The i.MX6q sabrelite platform equips an egalax touchscreen controller, > and this platform already transfered to GENERIC_GPIO framework, to > support this driver, we use a more generic way to get gpio. > > Add a return value checking for waking up the controller in the probe > function, this guarantee only a workable device can pass init. > > Signed-off-by: Hui Wang <jason77.wang@gmail.com> Ackyed-by Zhang Jiejing <jiejing.zhang@freescale.com> > --- > drivers/input/touchscreen/egalax_ts.c | 19 ++++++++++++++++--- > 1 files changed, 16 insertions(+), 3 deletions(-) Best Regards Jiejing
diff --git a/drivers/input/touchscreen/egalax_ts.c b/drivers/input/touchscreen/egalax_ts.c index 70524dd..668b9ba 100644 --- a/drivers/input/touchscreen/egalax_ts.c +++ b/drivers/input/touchscreen/egalax_ts.c @@ -28,6 +28,7 @@ #include <linux/slab.h> #include <linux/bitops.h> #include <linux/input/mt.h> +#include <linux/of_gpio.h> /* * Mouse Mode: some panel may configure the controller to mouse mode, @@ -122,8 +123,15 @@ static irqreturn_t egalax_ts_interrupt(int irq, void *dev_id) /* wake up controller by an falling edge of interrupt gpio. */ static int egalax_wake_up_device(struct i2c_client *client) { - int gpio = irq_to_gpio(client->irq); - int ret; + struct device_node *np = client->dev.of_node; + int gpio, ret; + + if (!np) + return -ENODEV; + + gpio = of_get_named_gpio(np, "irq-gpio", 0); + if (!gpio_is_valid(gpio)) + return -ENODEV; ret = gpio_request(gpio, "egalax_irq"); if (ret < 0) { @@ -181,7 +189,12 @@ static int __devinit egalax_ts_probe(struct i2c_client *client, ts->input_dev = input_dev; /* controller may be in sleep, wake it up. */ - egalax_wake_up_device(client); + ret = egalax_wake_up_device(client); + if (ret < 0) { + dev_err(&client->dev, "Failed to wake up the controller\n"); + error = ret; + goto err_free_dev; + } ret = egalax_firmware_version(client); if (ret < 0) {
The irq_to_gpio() is old, most platforms use GENERIC_GPIO framework and don't support this API anymore. The i.MX6q sabrelite platform equips an egalax touchscreen controller, and this platform already transfered to GENERIC_GPIO framework, to support this driver, we use a more generic way to get gpio. Add a return value checking for waking up the controller in the probe function, this guarantee only a workable device can pass init. Signed-off-by: Hui Wang <jason77.wang@gmail.com> --- drivers/input/touchscreen/egalax_ts.c | 19 ++++++++++++++++--- 1 files changed, 16 insertions(+), 3 deletions(-)