| Message ID | 1344516086-24615-3-git-send-email-timo.t.kokkonen@iki.fi (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Timo, On 08/09/12 15:41, Timo Kokkonen wrote: > The IR diode on the RX51 is connected to the GPT9. This data is needed > for the IR driver to function. > > Signed-off-by: Timo Kokkonen <timo.t.kokkonen@iki.fi> > --- > arch/arm/mach-omap2/board-rx51-peripherals.c | 30 ++++++++++++++++++++++++++ > 1 files changed, 30 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c > index df2534d..4a5a71b 100644 > --- a/arch/arm/mach-omap2/board-rx51-peripherals.c > +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c > @@ -34,6 +34,7 @@ > #include <plat/gpmc.h> > #include <plat/onenand.h> > #include <plat/gpmc-smc91x.h> > +#include <plat/omap-pm.h> > > #include <mach/board-rx51.h> > > @@ -46,6 +47,10 @@ > #include <../drivers/staging/iio/light/tsl2563.h> > #include <linux/lis3lv02d.h> > > +#if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE) > +#include "../../../drivers/media/rc/ir-rx51.h" > +#endif That is not really nice... You should place the struct lirc_rx51_platform_data and other stuff used outside of the driver in: include/media/ so you will not have to add that long and ugly relative path. > + > #include "mux.h" > #include "hsmmc.h" > #include "common-board-devices.h" > @@ -1220,6 +1225,30 @@ static void __init rx51_init_tsc2005(void) > gpio_to_irq(RX51_TSC2005_IRQ_GPIO); > } > > +#if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE) > +static struct lirc_rx51_platform_data rx51_lirc_data = { > + .set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat, > + .pwm_timer = 9, /* Use GPT 9 for CIR */ > +}; > + > +static struct platform_device rx51_lirc_device = { > + .name = "lirc_rx51", > + .id = -1, > + .dev = { > + .platform_data = &rx51_lirc_data, > + }, > +}; > + > +static void __init rx51_init_lirc(void) > +{ > + platform_device_register(&rx51_lirc_device); > +} > +#else > +static void __init rx51_init_lirc(void) > +{ > +} > +#endif > + > void __init rx51_peripherals_init(void) > { > rx51_i2c_init(); > @@ -1230,6 +1259,7 @@ void __init rx51_peripherals_init(void) > rx51_init_wl1251(); > rx51_init_tsc2005(); > rx51_init_si4713(); > + rx51_init_lirc(); > spi_register_board_info(rx51_peripherals_spi_board_info, > ARRAY_SIZE(rx51_peripherals_spi_board_info)); >
On 08/09/12 16:19, Igor Grinberg wrote: > Hi Timo, > > On 08/09/12 15:41, Timo Kokkonen wrote: >> The IR diode on the RX51 is connected to the GPT9. This data is needed >> for the IR driver to function. >> >> Signed-off-by: Timo Kokkonen <timo.t.kokkonen@iki.fi> >> --- >> arch/arm/mach-omap2/board-rx51-peripherals.c | 30 ++++++++++++++++++++++++++ >> 1 files changed, 30 insertions(+), 0 deletions(-) >> >> diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c >> index df2534d..4a5a71b 100644 >> --- a/arch/arm/mach-omap2/board-rx51-peripherals.c >> +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c >> @@ -34,6 +34,7 @@ >> #include <plat/gpmc.h> >> #include <plat/onenand.h> >> #include <plat/gpmc-smc91x.h> >> +#include <plat/omap-pm.h> >> >> #include <mach/board-rx51.h> >> >> @@ -46,6 +47,10 @@ >> #include <../drivers/staging/iio/light/tsl2563.h> >> #include <linux/lis3lv02d.h> >> >> +#if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE) >> +#include "../../../drivers/media/rc/ir-rx51.h" >> +#endif > > That is not really nice... > You should place the struct lirc_rx51_platform_data and > other stuff used outside of the driver in: include/media/ > so you will not have to add that long and ugly relative path. > Yeah, you're right. I'll change that. Thanks. -Timo >> + >> #include "mux.h" >> #include "hsmmc.h" >> #include "common-board-devices.h" >> @@ -1220,6 +1225,30 @@ static void __init rx51_init_tsc2005(void) >> gpio_to_irq(RX51_TSC2005_IRQ_GPIO); >> } >> >> +#if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE) >> +static struct lirc_rx51_platform_data rx51_lirc_data = { >> + .set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat, >> + .pwm_timer = 9, /* Use GPT 9 for CIR */ >> +}; >> + >> +static struct platform_device rx51_lirc_device = { >> + .name = "lirc_rx51", >> + .id = -1, >> + .dev = { >> + .platform_data = &rx51_lirc_data, >> + }, >> +}; >> + >> +static void __init rx51_init_lirc(void) >> +{ >> + platform_device_register(&rx51_lirc_device); >> +} >> +#else >> +static void __init rx51_init_lirc(void) >> +{ >> +} >> +#endif >> + >> void __init rx51_peripherals_init(void) >> { >> rx51_i2c_init(); >> @@ -1230,6 +1259,7 @@ void __init rx51_peripherals_init(void) >> rx51_init_wl1251(); >> rx51_init_tsc2005(); >> rx51_init_si4713(); >> + rx51_init_lirc(); >> spi_register_board_info(rx51_peripherals_spi_board_info, >> ARRAY_SIZE(rx51_peripherals_spi_board_info)); >> > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index df2534d..4a5a71b 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -34,6 +34,7 @@ #include <plat/gpmc.h> #include <plat/onenand.h> #include <plat/gpmc-smc91x.h> +#include <plat/omap-pm.h> #include <mach/board-rx51.h> @@ -46,6 +47,10 @@ #include <../drivers/staging/iio/light/tsl2563.h> #include <linux/lis3lv02d.h> +#if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE) +#include "../../../drivers/media/rc/ir-rx51.h" +#endif + #include "mux.h" #include "hsmmc.h" #include "common-board-devices.h" @@ -1220,6 +1225,30 @@ static void __init rx51_init_tsc2005(void) gpio_to_irq(RX51_TSC2005_IRQ_GPIO); } +#if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE) +static struct lirc_rx51_platform_data rx51_lirc_data = { + .set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat, + .pwm_timer = 9, /* Use GPT 9 for CIR */ +}; + +static struct platform_device rx51_lirc_device = { + .name = "lirc_rx51", + .id = -1, + .dev = { + .platform_data = &rx51_lirc_data, + }, +}; + +static void __init rx51_init_lirc(void) +{ + platform_device_register(&rx51_lirc_device); +} +#else +static void __init rx51_init_lirc(void) +{ +} +#endif + void __init rx51_peripherals_init(void) { rx51_i2c_init(); @@ -1230,6 +1259,7 @@ void __init rx51_peripherals_init(void) rx51_init_wl1251(); rx51_init_tsc2005(); rx51_init_si4713(); + rx51_init_lirc(); spi_register_board_info(rx51_peripherals_spi_board_info, ARRAY_SIZE(rx51_peripherals_spi_board_info));
The IR diode on the RX51 is connected to the GPT9. This data is needed for the IR driver to function. Signed-off-by: Timo Kokkonen <timo.t.kokkonen@iki.fi> --- arch/arm/mach-omap2/board-rx51-peripherals.c | 30 ++++++++++++++++++++++++++ 1 files changed, 30 insertions(+), 0 deletions(-)