| Message ID | 1344434316-21141-1-git-send-email-tarun.kanti@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, Aug 8, 2012 at 7:28 PM, Tarun Kanti DebBarma <tarun.kanti@ti.com> wrote: > Add *remove* callback so that necessary cleanup operations are > performed when device is unregistered. The device is deleted > from the list and associated clock handle is released by > calling clk_put() and irq descriptor is released using the > irq_free_desc() api. > > Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com> > Reported-by: Paul Walmsley <paul@pwsan.com> > Reviewed-by: Jon Hunter <jon-hunter@ti.com> > Cc: Kevin Hilman <khilman@ti.com> > Cc: Rajendra Nayak <rnayak@ti.com> > Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> > Cc: Cousson, Benoit <b-cousson@ti.com> > Cc: Paul Walmsley <paul@pwsan.com> > --- > v2: > Baseline: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git > Commit: 0d7614f09c1ebdbaa1599a5aba7593f147bf96ee (Linux 3.6-rc1) > > (1) Use irq_free_descs() instead of irq_free_desc(). > Besides, irq_free_desc() was using wrong parameter, > irq_base, instead of bank->irq. > (2) irq_free_descs() moved outside spin_lock/unlock_*() > in order to avoid exception warnings. > > (3) pm_runtime_disable() added so that bind can happen successfully > > Test Detail: > Step 1: Unbind gpio.5 device in order to invoke the *remove* callback. > #echo "omap_gpio.5" > sys/bus/platform/drivers/omap_gpio/unbind > > Step 2: Bind gpio.5 device and confirm probe() for the device succeeds. > #echo "omap_gpio.5" > sys/bus/platform/drivers/omap_gpio/bind > > Step 3: Execute read/write GPIO test case. > Thanks details about test. Whe you to "Unbind->bind", do you see that PM is not broken. In other words, can you also test and ensure that the OMAP3 suspend and CPUIDLE are not broken because of this patch. PER and CORE domains should transition to low power states. Regards Santosh
On Wed, Aug 8, 2012 at 7:33 PM, Shilimkar, Santosh <santosh.shilimkar@ti.com> wrote: > On Wed, Aug 8, 2012 at 7:28 PM, Tarun Kanti DebBarma <tarun.kanti@ti.com> wrote: >> Add *remove* callback so that necessary cleanup operations are >> performed when device is unregistered. The device is deleted >> from the list and associated clock handle is released by >> calling clk_put() and irq descriptor is released using the >> irq_free_desc() api. >> >> Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com> >> Reported-by: Paul Walmsley <paul@pwsan.com> >> Reviewed-by: Jon Hunter <jon-hunter@ti.com> >> Cc: Kevin Hilman <khilman@ti.com> >> Cc: Rajendra Nayak <rnayak@ti.com> >> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> >> Cc: Cousson, Benoit <b-cousson@ti.com> >> Cc: Paul Walmsley <paul@pwsan.com> >> --- >> v2: >> Baseline: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git >> Commit: 0d7614f09c1ebdbaa1599a5aba7593f147bf96ee (Linux 3.6-rc1) >> >> (1) Use irq_free_descs() instead of irq_free_desc(). >> Besides, irq_free_desc() was using wrong parameter, >> irq_base, instead of bank->irq. >> (2) irq_free_descs() moved outside spin_lock/unlock_*() >> in order to avoid exception warnings. >> >> (3) pm_runtime_disable() added so that bind can happen successfully >> >> Test Detail: >> Step 1: Unbind gpio.5 device in order to invoke the *remove* callback. >> #echo "omap_gpio.5" > sys/bus/platform/drivers/omap_gpio/unbind >> >> Step 2: Bind gpio.5 device and confirm probe() for the device succeeds. >> #echo "omap_gpio.5" > sys/bus/platform/drivers/omap_gpio/bind >> >> Step 3: Execute read/write GPIO test case. >> > Thanks details about test. Whe you to "Unbind->bind", do > you see that PM is not broken. > > In other words, can you also test and ensure that the OMAP3 suspend and > CPUIDLE are not broken because of this patch. > PER and CORE domains should transition to low power states. Sure, I will do the PM test on OMAP3 and confirm this. --- Tarun > > Regards > Santosh
Tarun Kanti DebBarma <tarun.kanti@ti.com> writes: > Add *remove* callback so that necessary cleanup operations are > performed when device is unregistered. The device is deleted > from the list and associated clock handle is released by > calling clk_put() and irq descriptor is released using the > irq_free_desc() api. > > Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com> > Reported-by: Paul Walmsley <paul@pwsan.com> > Reviewed-by: Jon Hunter <jon-hunter@ti.com> > Cc: Kevin Hilman <khilman@ti.com> > Cc: Rajendra Nayak <rnayak@ti.com> > Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> > Cc: Cousson, Benoit <b-cousson@ti.com> > Cc: Paul Walmsley <paul@pwsan.com> > --- > v2: > Baseline: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git > Commit: 0d7614f09c1ebdbaa1599a5aba7593f147bf96ee (Linux 3.6-rc1) > > (1) Use irq_free_descs() instead of irq_free_desc(). > Besides, irq_free_desc() was using wrong parameter, > irq_base, instead of bank->irq. > (2) irq_free_descs() moved outside spin_lock/unlock_*() > in order to avoid exception warnings. > > (3) pm_runtime_disable() added so that bind can happen successfully > > Test Detail: > Step 1: Unbind gpio.5 device in order to invoke the *remove* callback. > #echo "omap_gpio.5" > sys/bus/platform/drivers/omap_gpio/unbind > > Step 2: Bind gpio.5 device and confirm probe() for the device succeeds. > #echo "omap_gpio.5" > sys/bus/platform/drivers/omap_gpio/bind > > Step 3: Execute read/write GPIO test case. What happens when GPIOs are in use (requested)? Kevin > drivers/gpio/gpio-omap.c | 35 +++++++++++++++++++++++++++++++++++ > 1 files changed, 35 insertions(+), 0 deletions(-) > > diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c > index e6efd77..50de875 100644 > --- a/drivers/gpio/gpio-omap.c > +++ b/drivers/gpio/gpio-omap.c > @@ -1152,6 +1152,40 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev) > return ret; > } > > +/** > + * omap_gpio_remove - cleanup a registered gpio device > + * @pdev: pointer to current gpio platform device > + * > + * Called by driver framework whenever a gpio device is unregistered. > + * GPIO is deleted from the list and associated clock handle freed. > + */ > +static int __devexit omap_gpio_remove(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct gpio_bank *bank; > + unsigned long flags; > + int ret = -EINVAL; > + > + list_for_each_entry(bank, &omap_gpio_list, node) { > + spin_lock_irqsave(&bank->lock, flags); > + if (bank->dev == dev) { > + clk_put(bank->dbck); > + list_del(&bank->node); > + ret = 0; > + spin_unlock_irqrestore(&bank->lock, flags); > + break; > + } > + spin_unlock_irqrestore(&bank->lock, flags); > + } > + > + if (!ret) { > + pm_runtime_disable(bank->dev); > + irq_free_descs(bank->irq_base, bank->width); > + } > + > + return ret; > +} > + > #ifdef CONFIG_ARCH_OMAP2PLUS > > #if defined(CONFIG_PM_RUNTIME) > @@ -1478,6 +1512,7 @@ MODULE_DEVICE_TABLE(of, omap_gpio_match); > > static struct platform_driver omap_gpio_driver = { > .probe = omap_gpio_probe, > + .remove = __devexit_p(omap_gpio_remove), > .driver = { > .name = "omap_gpio", > .pm = &gpio_pm_ops,
On Wed, Aug 8, 2012 at 10:40 PM, Kevin Hilman <khilman@ti.com> wrote: > Tarun Kanti DebBarma <tarun.kanti@ti.com> writes: > >> Add *remove* callback so that necessary cleanup operations are >> performed when device is unregistered. The device is deleted >> from the list and associated clock handle is released by >> calling clk_put() and irq descriptor is released using the >> irq_free_desc() api. >> >> Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com> >> Reported-by: Paul Walmsley <paul@pwsan.com> >> Reviewed-by: Jon Hunter <jon-hunter@ti.com> >> Cc: Kevin Hilman <khilman@ti.com> >> Cc: Rajendra Nayak <rnayak@ti.com> >> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> >> Cc: Cousson, Benoit <b-cousson@ti.com> >> Cc: Paul Walmsley <paul@pwsan.com> >> --- >> v2: >> Baseline: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git >> Commit: 0d7614f09c1ebdbaa1599a5aba7593f147bf96ee (Linux 3.6-rc1) >> >> (1) Use irq_free_descs() instead of irq_free_desc(). >> Besides, irq_free_desc() was using wrong parameter, >> irq_base, instead of bank->irq. >> (2) irq_free_descs() moved outside spin_lock/unlock_*() >> in order to avoid exception warnings. >> >> (3) pm_runtime_disable() added so that bind can happen successfully >> >> Test Detail: >> Step 1: Unbind gpio.5 device in order to invoke the *remove* callback. >> #echo "omap_gpio.5" > sys/bus/platform/drivers/omap_gpio/unbind >> >> Step 2: Bind gpio.5 device and confirm probe() for the device succeeds. >> #echo "omap_gpio.5" > sys/bus/platform/drivers/omap_gpio/bind >> >> Step 3: Execute read/write GPIO test case. > > What happens when GPIOs are in use (requested)? If I try to unbind a currently active GPIO bank then I see an exception after the irq descriptor is freed by the remove. I believe this is expected because interrupt raised by the system would not be handled. [ 18.859405] irq_free_descs: calling free_desc(192)... [ 18.866180] irq_free_descs: calling free_desc(192)... [ 18.872680] irq_free_descs: calling free_desc(192)... [ 18.877990] irq_free_descs: calling free_desc(192)... [ 18.883270] irq_free_descs: calling free_desc(192)... [ 18.888549] irq_free_descs: calling free_desc(192)... [ 18.893859] irq_free_descs: calling free_desc(192)... [ 18.899139] irq_free_descs: calling free_desc(192)... [ 18.904418] irq_free_descs: calling free_desc(192)... [ 18.909729] irq_free_descs: calling free_desc(192)... [ 18.915008] irq_free_descs: calling free_desc(192)... [ 18.920288] irq_free_descs: calling free_desc(192)... [ 18.925598] irq_free_descs: calling free_desc(192)... [ 18.930877] irq_free_descs: calling free_desc(192)... [ 18.936157] irq_free_descs: calling free_desc(192)... [ 18.941467] irq_free_descs: calling free_desc(192)... [ 18.946746] irq_free_descs: calling free_desc(192)... [ 18.952026] irq_free_descs: calling free_desc(192)... [ 18.957336] irq_free_descs: calling free_desc(192)... [ 18.962615] irq_free_descs: calling free_desc(192)... [ 18.967895] irq_free_descs: calling free_desc(192)... [ 18.973205] irq_free_descs: calling free_desc(192)... [ 18.978485] irq_free_descs: calling free_desc(192)... [ 18.983764] irq_free_descs: calling free_desc(192)... [ 18.989074] irq_free_descs: calling free_desc(192)... [ 18.994354] irq_free_descs: calling free_desc(192)... [ 18.999633] irq_free_descs: calling free_desc(192)... [ 19.004913] irq_free_descs: calling free_desc(192)... [ 19.010223] irq_free_descs: calling free_desc(192)... [ 19.015502] irq_free_descs: calling free_desc(192)... [ 19.020782] irq_free_descs: calling free_desc(192)... [ 19.026092] irq_free_descs: calling free_desc(192)... [ 19.032440] irq 194, desc: c072f340, depth: 1, count: 0, unhandled: 0 [ 19.039154] ->handle_irq(): c00a3e08, handle_bad_irq+0x0/0x260 [ 19.045379] ->irq_data.chip(): c078ff7c, no_irq_chip+0x0/0x5c [ 19.051391] ->action(): ef0d42c0 [ 19.054748] ->action->handler(): c0399ee0, ks8851_irq+0x0/0x1c [ 19.060852] IRQ_NOPROBE set [ 19.064056] IRQ_NOREQUEST set [ 19.067230] Unable to handle kernel paging request at virtual address 203a6c9 [ 19.074768] pgd = c0004000 [ 19.077606] [203a6c99] *pgd=00000000 [ 19.081329] Internal error: Oops: 5 [#1] SMP ARM [ 19.086151] Modules linked in: [ 19.089355] CPU: 0 Not tainted (3.6.0-rc1-00003-g43a916d-dirty #885) [ 19.096374] PC is at gpio_irq_handler+0x7c/0x26c [ 19.101165] LR is at handle_bad_irq+0x1cc/0x260 [ 19.105895] pc : [<c02e13b0>] lr : [<c00a3fd4>] psr: 60000093 [ 19.105895] sp : c0725df8 ip : 00006fc6 fp : 00000001 [ 19.117889] r10: 00000000 r9 : fa05502c r8 : 00000020 [ 19.123352] r7 : 00000000 r6 : 00000000 r5 : 00000000 r4 : ef0bbe10 [ 19.130157] r3 : ef0c1980 r2 : 203a6c65 r1 : 00000034 r0 : 00000000 [ 19.136993] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kel [ 19.144714] Control: 10c53c7d Table: ae89804a DAC: 00000017 [ 19.150695] Process swapper/0 (pid: 0, stack limit = 0xc07242f8) [ 19.156982] Stack: (0xc0725df8 to 0xc0726000) [ 19.161529] 5de0: c0740 [ 19.170074] 5e00: c0724000 c0724000 c07440d8 c07224a4 0000003e 00000000 c0740 [ 19.178619] 5e20: c0725edc c00a3670 000001da c0015380 fa24010c c0742d30 c0720 [ 19.187164] 5e40: 00000001 c000846c c0746980 c04f8c74 20000013 ffffffff c0724 [ 19.195709] 5e60: 0005ebb2 00000001 00000000 c0746980 c1530ac0 ee8cfe00 c1530 [ 19.204223] 5e80: 00000001 c07440d8 ee8cfe00 c0725edc 00000001 c0725ea8 00054 [ 19.212768] 5ea0: 20000013 ffffffff c0724000 c007425c 00000002 00000000 c0077 [ 19.221313] 5ec0: ef320b00 c0746980 00000000 c1530ac0 ef320b00 c0722ac0 c0720 [ 19.229858] 5ee0: c152ec20 c00696cc 00000000 00000000 c0724000 c0724000 c1524 [ 19.238403] 5f00: c152ec20 c0015e14 c0722ac0 c0722ac0 c0722ac0 c0722ac0 c0720 [ 19.246948] 5f20: c0722ac0 c0722ac0 6e6b0f0d 00000004 00000000 00000000 c0080 [ 19.255493] 5f40: 00000001 00000000 00000000 501539bc 00000004 c0091654 c1528 [ 19.264038] 5f60: c07d55b8 5006c071 00000000 c008cab8 00000000 00000002 50064 [ 19.272552] 5f80: c0748078 c0724000 c07c0548 c0504510 c0747e60 00000000 411f8 [ 19.281097] 5fa0: 00000000 c0015e14 00000000 c0743e1c c07c0480 c07057dc bfffa [ 19.289642] 5fc0: 00000000 c06d48d8 ffffffff ffffffff c06d4450 00000000 0000c [ 19.298187] 5fe0: 00000000 10c53c7d c0742d08 c07057ac c0747e54 80008044 00000 [ 19.306732] [<c02e13b0>] (gpio_irq_handler+0x7c/0x26c) from [<c00a3670>] (ge) [ 19.316558] [<c00a3670>] (generic_handle_irq+0x34/0x44) from [<c0015380>] (h) [ 19.325744] [<c0015380>] (handle_IRQ+0x4c/0xac) from [<c000846c>] (gic_handl) [ 19.334564] [<c000846c>] (gic_handle_irq+0x2c/0x60) from [<c04f8ee4>] (__irq) [ 19.343292] Exception stack(0xc0725e60 to 0xc0725ea8) [ 19.348571] 5e60: 0005ebb2 00000001 00000000 c0746980 c1530ac0 ee8cfe00 c1530 [ 19.357116] 5e80: 00000001 c07440d8 ee8cfe00 c0725edc 00000001 c0725ea8 00054 [ 19.365631] 5ea0: 20000013 ffffffff [ 19.369293] [<c04f8ee4>] (__irq_svc+0x44/0x5c) from [<c04f8c74>] (_raw_spin_) [ 19.378570] [<c04f8c74>] (_raw_spin_unlock_irq+0x28/0x2c) from [<c007425c>] ) [ 19.388732] [<c007425c>] (finish_task_switch+0x84/0x198) from [<c04f7760>] () [ 19.398193] [<c04f7760>] (__schedule+0x404/0x870) from [<c0015e14>] (cpu_idl) [ 19.406768] [<c0015e14>] (cpu_idle+0xe8/0x114) from [<c06d48d8>] (start_kern) [ 19.415466] Code: e59480e4 e1d311b4 e5d36034 e1a0a81b (e7920001) [ 19.421844] ---[ end trace 3eb9bf4b81babe15 ]--- [ 19.426666] Kernel panic - not syncing: Fatal exception in interrupt [ 19.433288] CPU1: stopping [ 19.436157] [<c001beac>] (unwind_backtrace+0x0/0xf4) from [<c0019db4>] (hand) [ 19.445220] [<c0019db4>] (handle_IPI+0x130/0x15c) from [<c0008498>] (gic_han) [ 19.454223] [<c0008498>] (gic_handle_irq+0x58/0x60) from [<c04f8ee4>] (__irq) [ 19.462951] Exception stack(0xef06ff88 to 0xef06ffd0) [ 19.468231] ff80: c079f960 c079f960 00000000 00000000 ef068 [ 19.476745] ffa0: c0504510 c0747e60 00000000 411fc092 c0748078 00000000 00000 [ 19.485290] ffc0: c0015570 c0015574 60000113 ffffffff [ 19.490570] [<c04f8ee4>] (__irq_svc+0x44/0x5c) from [<c0015574>] (default_id) [ 19.499114] [<c0015574>] (default_idle+0x20/0x44) from [<c0015dc8>] (cpu_idl) [ 19.507659] [<c0015dc8>] (cpu_idle+0x9c/0x114) from [<804f1d94>] (0x804f1d94) --- Tarun > > Kevin > >> drivers/gpio/gpio-omap.c | 35 +++++++++++++++++++++++++++++++++++ >> 1 files changed, 35 insertions(+), 0 deletions(-) >> >> diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c >> index e6efd77..50de875 100644 >> --- a/drivers/gpio/gpio-omap.c >> +++ b/drivers/gpio/gpio-omap.c >> @@ -1152,6 +1152,40 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev) >> return ret; >> } >> >> +/** >> + * omap_gpio_remove - cleanup a registered gpio device >> + * @pdev: pointer to current gpio platform device >> + * >> + * Called by driver framework whenever a gpio device is unregistered. >> + * GPIO is deleted from the list and associated clock handle freed. >> + */ >> +static int __devexit omap_gpio_remove(struct platform_device *pdev) >> +{ >> + struct device *dev = &pdev->dev; >> + struct gpio_bank *bank; >> + unsigned long flags; >> + int ret = -EINVAL; >> + >> + list_for_each_entry(bank, &omap_gpio_list, node) { >> + spin_lock_irqsave(&bank->lock, flags); >> + if (bank->dev == dev) { >> + clk_put(bank->dbck); >> + list_del(&bank->node); >> + ret = 0; >> + spin_unlock_irqrestore(&bank->lock, flags); >> + break; >> + } >> + spin_unlock_irqrestore(&bank->lock, flags); >> + } >> + >> + if (!ret) { >> + pm_runtime_disable(bank->dev); >> + irq_free_descs(bank->irq_base, bank->width); >> + } >> + >> + return ret; >> +} >> + >> #ifdef CONFIG_ARCH_OMAP2PLUS >> >> #if defined(CONFIG_PM_RUNTIME) >> @@ -1478,6 +1512,7 @@ MODULE_DEVICE_TABLE(of, omap_gpio_match); >> >> static struct platform_driver omap_gpio_driver = { >> .probe = omap_gpio_probe, >> + .remove = __devexit_p(omap_gpio_remove), >> .driver = { >> .name = "omap_gpio", >> .pm = &gpio_pm_ops,
"DebBarma, Tarun Kanti" <tarun.kanti@ti.com> writes: > On Wed, Aug 8, 2012 at 10:40 PM, Kevin Hilman <khilman@ti.com> wrote: >> Tarun Kanti DebBarma <tarun.kanti@ti.com> writes: >> >>> Add *remove* callback so that necessary cleanup operations are >>> performed when device is unregistered. The device is deleted >>> from the list and associated clock handle is released by >>> calling clk_put() and irq descriptor is released using the >>> irq_free_desc() api. >>> >>> Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com> >>> Reported-by: Paul Walmsley <paul@pwsan.com> >>> Reviewed-by: Jon Hunter <jon-hunter@ti.com> >>> Cc: Kevin Hilman <khilman@ti.com> >>> Cc: Rajendra Nayak <rnayak@ti.com> >>> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> >>> Cc: Cousson, Benoit <b-cousson@ti.com> >>> Cc: Paul Walmsley <paul@pwsan.com> >>> --- >>> v2: >>> Baseline: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git >>> Commit: 0d7614f09c1ebdbaa1599a5aba7593f147bf96ee (Linux 3.6-rc1) >>> >>> (1) Use irq_free_descs() instead of irq_free_desc(). >>> Besides, irq_free_desc() was using wrong parameter, >>> irq_base, instead of bank->irq. >>> (2) irq_free_descs() moved outside spin_lock/unlock_*() >>> in order to avoid exception warnings. >>> >>> (3) pm_runtime_disable() added so that bind can happen successfully >>> >>> Test Detail: >>> Step 1: Unbind gpio.5 device in order to invoke the *remove* callback. >>> #echo "omap_gpio.5" > sys/bus/platform/drivers/omap_gpio/unbind >>> >>> Step 2: Bind gpio.5 device and confirm probe() for the device succeeds. >>> #echo "omap_gpio.5" > sys/bus/platform/drivers/omap_gpio/bind >>> >>> Step 3: Execute read/write GPIO test case. >> >> What happens when GPIOs are in use (requested)? > If I try to unbind a currently active GPIO bank then I see an exception > after the irq descriptor is freed by the remove. I believe this is expected > because interrupt raised by the system would not be handled. ... and the GPIO is still configured to trigger interrupts. The point is that there is lots to cleanup/unconfigure properly for this to work properly. Kevin > [ 18.859405] irq_free_descs: calling free_desc(192)... > [ 18.866180] irq_free_descs: calling free_desc(192)... > [ 18.872680] irq_free_descs: calling free_desc(192)... > [ 18.877990] irq_free_descs: calling free_desc(192)... > [ 18.883270] irq_free_descs: calling free_desc(192)... > [ 18.888549] irq_free_descs: calling free_desc(192)... > [ 18.893859] irq_free_descs: calling free_desc(192)... > [ 18.899139] irq_free_descs: calling free_desc(192)... > [ 18.904418] irq_free_descs: calling free_desc(192)... > [ 18.909729] irq_free_descs: calling free_desc(192)... > [ 18.915008] irq_free_descs: calling free_desc(192)... > [ 18.920288] irq_free_descs: calling free_desc(192)... > [ 18.925598] irq_free_descs: calling free_desc(192)... > [ 18.930877] irq_free_descs: calling free_desc(192)... > [ 18.936157] irq_free_descs: calling free_desc(192)... > [ 18.941467] irq_free_descs: calling free_desc(192)... > [ 18.946746] irq_free_descs: calling free_desc(192)... > [ 18.952026] irq_free_descs: calling free_desc(192)... > [ 18.957336] irq_free_descs: calling free_desc(192)... > [ 18.962615] irq_free_descs: calling free_desc(192)... > [ 18.967895] irq_free_descs: calling free_desc(192)... > [ 18.973205] irq_free_descs: calling free_desc(192)... > [ 18.978485] irq_free_descs: calling free_desc(192)... > [ 18.983764] irq_free_descs: calling free_desc(192)... > [ 18.989074] irq_free_descs: calling free_desc(192)... > [ 18.994354] irq_free_descs: calling free_desc(192)... > [ 18.999633] irq_free_descs: calling free_desc(192)... > [ 19.004913] irq_free_descs: calling free_desc(192)... > [ 19.010223] irq_free_descs: calling free_desc(192)... > [ 19.015502] irq_free_descs: calling free_desc(192)... > [ 19.020782] irq_free_descs: calling free_desc(192)... > [ 19.026092] irq_free_descs: calling free_desc(192)... > [ 19.032440] irq 194, desc: c072f340, depth: 1, count: 0, unhandled: 0 > [ 19.039154] ->handle_irq(): c00a3e08, handle_bad_irq+0x0/0x260 > [ 19.045379] ->irq_data.chip(): c078ff7c, no_irq_chip+0x0/0x5c > [ 19.051391] ->action(): ef0d42c0 > [ 19.054748] ->action->handler(): c0399ee0, ks8851_irq+0x0/0x1c > [ 19.060852] IRQ_NOPROBE set > [ 19.064056] IRQ_NOREQUEST set > [ 19.067230] Unable to handle kernel paging request at virtual address 203a6c9 > [ 19.074768] pgd = c0004000 > [ 19.077606] [203a6c99] *pgd=00000000 > [ 19.081329] Internal error: Oops: 5 [#1] SMP ARM > [ 19.086151] Modules linked in: > [ 19.089355] CPU: 0 Not tainted (3.6.0-rc1-00003-g43a916d-dirty #885) > [ 19.096374] PC is at gpio_irq_handler+0x7c/0x26c > [ 19.101165] LR is at handle_bad_irq+0x1cc/0x260 > [ 19.105895] pc : [<c02e13b0>] lr : [<c00a3fd4>] psr: 60000093 > [ 19.105895] sp : c0725df8 ip : 00006fc6 fp : 00000001 > [ 19.117889] r10: 00000000 r9 : fa05502c r8 : 00000020 > [ 19.123352] r7 : 00000000 r6 : 00000000 r5 : 00000000 r4 : ef0bbe10 > [ 19.130157] r3 : ef0c1980 r2 : 203a6c65 r1 : 00000034 r0 : 00000000 > [ 19.136993] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kel > [ 19.144714] Control: 10c53c7d Table: ae89804a DAC: 00000017 > [ 19.150695] Process swapper/0 (pid: 0, stack limit = 0xc07242f8) > [ 19.156982] Stack: (0xc0725df8 to 0xc0726000) > [ 19.161529] 5de0: c0740 > [ 19.170074] 5e00: c0724000 c0724000 c07440d8 c07224a4 0000003e 00000000 c0740 > [ 19.178619] 5e20: c0725edc c00a3670 000001da c0015380 fa24010c c0742d30 c0720 > [ 19.187164] 5e40: 00000001 c000846c c0746980 c04f8c74 20000013 ffffffff c0724 > [ 19.195709] 5e60: 0005ebb2 00000001 00000000 c0746980 c1530ac0 ee8cfe00 c1530 > [ 19.204223] 5e80: 00000001 c07440d8 ee8cfe00 c0725edc 00000001 c0725ea8 00054 > [ 19.212768] 5ea0: 20000013 ffffffff c0724000 c007425c 00000002 00000000 c0077 > [ 19.221313] 5ec0: ef320b00 c0746980 00000000 c1530ac0 ef320b00 c0722ac0 c0720 > [ 19.229858] 5ee0: c152ec20 c00696cc 00000000 00000000 c0724000 c0724000 c1524 > [ 19.238403] 5f00: c152ec20 c0015e14 c0722ac0 c0722ac0 c0722ac0 c0722ac0 c0720 > [ 19.246948] 5f20: c0722ac0 c0722ac0 6e6b0f0d 00000004 00000000 00000000 c0080 > [ 19.255493] 5f40: 00000001 00000000 00000000 501539bc 00000004 c0091654 c1528 > [ 19.264038] 5f60: c07d55b8 5006c071 00000000 c008cab8 00000000 00000002 50064 > [ 19.272552] 5f80: c0748078 c0724000 c07c0548 c0504510 c0747e60 00000000 411f8 > [ 19.281097] 5fa0: 00000000 c0015e14 00000000 c0743e1c c07c0480 c07057dc bfffa > [ 19.289642] 5fc0: 00000000 c06d48d8 ffffffff ffffffff c06d4450 00000000 0000c > [ 19.298187] 5fe0: 00000000 10c53c7d c0742d08 c07057ac c0747e54 80008044 00000 > [ 19.306732] [<c02e13b0>] (gpio_irq_handler+0x7c/0x26c) from [<c00a3670>] (ge) > [ 19.316558] [<c00a3670>] (generic_handle_irq+0x34/0x44) from [<c0015380>] (h) > [ 19.325744] [<c0015380>] (handle_IRQ+0x4c/0xac) from [<c000846c>] (gic_handl) > [ 19.334564] [<c000846c>] (gic_handle_irq+0x2c/0x60) from [<c04f8ee4>] (__irq) > [ 19.343292] Exception stack(0xc0725e60 to 0xc0725ea8) > [ 19.348571] 5e60: 0005ebb2 00000001 00000000 c0746980 c1530ac0 ee8cfe00 c1530 > [ 19.357116] 5e80: 00000001 c07440d8 ee8cfe00 c0725edc 00000001 c0725ea8 00054 > [ 19.365631] 5ea0: 20000013 ffffffff > [ 19.369293] [<c04f8ee4>] (__irq_svc+0x44/0x5c) from [<c04f8c74>] (_raw_spin_) > [ 19.378570] [<c04f8c74>] (_raw_spin_unlock_irq+0x28/0x2c) from [<c007425c>] ) > [ 19.388732] [<c007425c>] (finish_task_switch+0x84/0x198) from [<c04f7760>] () > [ 19.398193] [<c04f7760>] (__schedule+0x404/0x870) from [<c0015e14>] (cpu_idl) > [ 19.406768] [<c0015e14>] (cpu_idle+0xe8/0x114) from [<c06d48d8>] (start_kern) > [ 19.415466] Code: e59480e4 e1d311b4 e5d36034 e1a0a81b (e7920001) > [ 19.421844] ---[ end trace 3eb9bf4b81babe15 ]--- > [ 19.426666] Kernel panic - not syncing: Fatal exception in interrupt > [ 19.433288] CPU1: stopping > [ 19.436157] [<c001beac>] (unwind_backtrace+0x0/0xf4) from [<c0019db4>] (hand) > [ 19.445220] [<c0019db4>] (handle_IPI+0x130/0x15c) from [<c0008498>] (gic_han) > [ 19.454223] [<c0008498>] (gic_handle_irq+0x58/0x60) from [<c04f8ee4>] (__irq) > [ 19.462951] Exception stack(0xef06ff88 to 0xef06ffd0) > [ 19.468231] ff80: c079f960 c079f960 00000000 00000000 ef068 > [ 19.476745] ffa0: c0504510 c0747e60 00000000 411fc092 c0748078 00000000 00000 > [ 19.485290] ffc0: c0015570 c0015574 60000113 ffffffff > [ 19.490570] [<c04f8ee4>] (__irq_svc+0x44/0x5c) from [<c0015574>] (default_id) > [ 19.499114] [<c0015574>] (default_idle+0x20/0x44) from [<c0015dc8>] (cpu_idl) > [ 19.507659] [<c0015dc8>] (cpu_idle+0x9c/0x114) from [<804f1d94>] (0x804f1d94) > --- > Tarun >> >> Kevin >> >>> drivers/gpio/gpio-omap.c | 35 +++++++++++++++++++++++++++++++++++ >>> 1 files changed, 35 insertions(+), 0 deletions(-) >>> >>> diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c >>> index e6efd77..50de875 100644 >>> --- a/drivers/gpio/gpio-omap.c >>> +++ b/drivers/gpio/gpio-omap.c >>> @@ -1152,6 +1152,40 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev) >>> return ret; >>> } >>> >>> +/** >>> + * omap_gpio_remove - cleanup a registered gpio device >>> + * @pdev: pointer to current gpio platform device >>> + * >>> + * Called by driver framework whenever a gpio device is unregistered. >>> + * GPIO is deleted from the list and associated clock handle freed. >>> + */ >>> +static int __devexit omap_gpio_remove(struct platform_device *pdev) >>> +{ >>> + struct device *dev = &pdev->dev; >>> + struct gpio_bank *bank; >>> + unsigned long flags; >>> + int ret = -EINVAL; >>> + >>> + list_for_each_entry(bank, &omap_gpio_list, node) { >>> + spin_lock_irqsave(&bank->lock, flags); >>> + if (bank->dev == dev) { >>> + clk_put(bank->dbck); >>> + list_del(&bank->node); >>> + ret = 0; >>> + spin_unlock_irqrestore(&bank->lock, flags); >>> + break; >>> + } >>> + spin_unlock_irqrestore(&bank->lock, flags); >>> + } >>> + >>> + if (!ret) { >>> + pm_runtime_disable(bank->dev); >>> + irq_free_descs(bank->irq_base, bank->width); >>> + } >>> + >>> + return ret; >>> +} >>> + >>> #ifdef CONFIG_ARCH_OMAP2PLUS >>> >>> #if defined(CONFIG_PM_RUNTIME) >>> @@ -1478,6 +1512,7 @@ MODULE_DEVICE_TABLE(of, omap_gpio_match); >>> >>> static struct platform_driver omap_gpio_driver = { >>> .probe = omap_gpio_probe, >>> + .remove = __devexit_p(omap_gpio_remove), >>> .driver = { >>> .name = "omap_gpio", >>> .pm = &gpio_pm_ops, > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Aug 9, 2012 at 8:28 PM, Kevin Hilman <khilman@ti.com> wrote: > "DebBarma, Tarun Kanti" <tarun.kanti@ti.com> writes: > >> On Wed, Aug 8, 2012 at 10:40 PM, Kevin Hilman <khilman@ti.com> wrote: >>> Tarun Kanti DebBarma <tarun.kanti@ti.com> writes: >>> >>>> Add *remove* callback so that necessary cleanup operations are >>>> performed when device is unregistered. The device is deleted >>>> from the list and associated clock handle is released by >>>> calling clk_put() and irq descriptor is released using the >>>> irq_free_desc() api. >>>> >>>> Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com> >>>> Reported-by: Paul Walmsley <paul@pwsan.com> >>>> Reviewed-by: Jon Hunter <jon-hunter@ti.com> >>>> Cc: Kevin Hilman <khilman@ti.com> >>>> Cc: Rajendra Nayak <rnayak@ti.com> >>>> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> >>>> Cc: Cousson, Benoit <b-cousson@ti.com> >>>> Cc: Paul Walmsley <paul@pwsan.com> >>>> --- >>>> v2: >>>> Baseline: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git >>>> Commit: 0d7614f09c1ebdbaa1599a5aba7593f147bf96ee (Linux 3.6-rc1) >>>> >>>> (1) Use irq_free_descs() instead of irq_free_desc(). >>>> Besides, irq_free_desc() was using wrong parameter, >>>> irq_base, instead of bank->irq. >>>> (2) irq_free_descs() moved outside spin_lock/unlock_*() >>>> in order to avoid exception warnings. >>>> >>>> (3) pm_runtime_disable() added so that bind can happen successfully >>>> >>>> Test Detail: >>>> Step 1: Unbind gpio.5 device in order to invoke the *remove* callback. >>>> #echo "omap_gpio.5" > sys/bus/platform/drivers/omap_gpio/unbind >>>> >>>> Step 2: Bind gpio.5 device and confirm probe() for the device succeeds. >>>> #echo "omap_gpio.5" > sys/bus/platform/drivers/omap_gpio/bind >>>> >>>> Step 3: Execute read/write GPIO test case. >>> >>> What happens when GPIOs are in use (requested)? >> If I try to unbind a currently active GPIO bank then I see an exception >> after the irq descriptor is freed by the remove. I believe this is expected >> because interrupt raised by the system would not be handled. > > ... and the GPIO is still configured to trigger interrupts. Right! > > The point is that there is lots to cleanup/unconfigure properly for this > to work properly. As far as I can think of, all active gpio requests done either in board files or through DT have to be freed. But if this is done then when we bind() the device again initialization done in omap_gpio_probe() would not restore the board/DT related configuration. So the point is are we supposed to do all these cleanup in *remove* callback? If yes, how do we manage board level gpio usage? --- Tarun > > Kevin > >> [ 18.859405] irq_free_descs: calling free_desc(192)... >> [ 18.866180] irq_free_descs: calling free_desc(192)... >> [ 18.872680] irq_free_descs: calling free_desc(192)... >> [ 18.877990] irq_free_descs: calling free_desc(192)... >> [ 18.883270] irq_free_descs: calling free_desc(192)... >> [ 18.888549] irq_free_descs: calling free_desc(192)... >> [ 18.893859] irq_free_descs: calling free_desc(192)... >> [ 18.899139] irq_free_descs: calling free_desc(192)... >> [ 18.904418] irq_free_descs: calling free_desc(192)... >> [ 18.909729] irq_free_descs: calling free_desc(192)... >> [ 18.915008] irq_free_descs: calling free_desc(192)... >> [ 18.920288] irq_free_descs: calling free_desc(192)... >> [ 18.925598] irq_free_descs: calling free_desc(192)... >> [ 18.930877] irq_free_descs: calling free_desc(192)... >> [ 18.936157] irq_free_descs: calling free_desc(192)... >> [ 18.941467] irq_free_descs: calling free_desc(192)... >> [ 18.946746] irq_free_descs: calling free_desc(192)... >> [ 18.952026] irq_free_descs: calling free_desc(192)... >> [ 18.957336] irq_free_descs: calling free_desc(192)... >> [ 18.962615] irq_free_descs: calling free_desc(192)... >> [ 18.967895] irq_free_descs: calling free_desc(192)... >> [ 18.973205] irq_free_descs: calling free_desc(192)... >> [ 18.978485] irq_free_descs: calling free_desc(192)... >> [ 18.983764] irq_free_descs: calling free_desc(192)... >> [ 18.989074] irq_free_descs: calling free_desc(192)... >> [ 18.994354] irq_free_descs: calling free_desc(192)... >> [ 18.999633] irq_free_descs: calling free_desc(192)... >> [ 19.004913] irq_free_descs: calling free_desc(192)... >> [ 19.010223] irq_free_descs: calling free_desc(192)... >> [ 19.015502] irq_free_descs: calling free_desc(192)... >> [ 19.020782] irq_free_descs: calling free_desc(192)... >> [ 19.026092] irq_free_descs: calling free_desc(192)... >> [ 19.032440] irq 194, desc: c072f340, depth: 1, count: 0, unhandled: 0 >> [ 19.039154] ->handle_irq(): c00a3e08, handle_bad_irq+0x0/0x260 >> [ 19.045379] ->irq_data.chip(): c078ff7c, no_irq_chip+0x0/0x5c >> [ 19.051391] ->action(): ef0d42c0 >> [ 19.054748] ->action->handler(): c0399ee0, ks8851_irq+0x0/0x1c >> [ 19.060852] IRQ_NOPROBE set >> [ 19.064056] IRQ_NOREQUEST set >> [ 19.067230] Unable to handle kernel paging request at virtual address 203a6c9 >> [ 19.074768] pgd = c0004000 >> [ 19.077606] [203a6c99] *pgd=00000000 >> [ 19.081329] Internal error: Oops: 5 [#1] SMP ARM >> [ 19.086151] Modules linked in: >> [ 19.089355] CPU: 0 Not tainted (3.6.0-rc1-00003-g43a916d-dirty #885) >> [ 19.096374] PC is at gpio_irq_handler+0x7c/0x26c >> [ 19.101165] LR is at handle_bad_irq+0x1cc/0x260 >> [ 19.105895] pc : [<c02e13b0>] lr : [<c00a3fd4>] psr: 60000093 >> [ 19.105895] sp : c0725df8 ip : 00006fc6 fp : 00000001 >> [ 19.117889] r10: 00000000 r9 : fa05502c r8 : 00000020 >> [ 19.123352] r7 : 00000000 r6 : 00000000 r5 : 00000000 r4 : ef0bbe10 >> [ 19.130157] r3 : ef0c1980 r2 : 203a6c65 r1 : 00000034 r0 : 00000000 >> [ 19.136993] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kel >> [ 19.144714] Control: 10c53c7d Table: ae89804a DAC: 00000017 >> [ 19.150695] Process swapper/0 (pid: 0, stack limit = 0xc07242f8) >> [ 19.156982] Stack: (0xc0725df8 to 0xc0726000) >> [ 19.161529] 5de0: c0740 >> [ 19.170074] 5e00: c0724000 c0724000 c07440d8 c07224a4 0000003e 00000000 c0740 >> [ 19.178619] 5e20: c0725edc c00a3670 000001da c0015380 fa24010c c0742d30 c0720 >> [ 19.187164] 5e40: 00000001 c000846c c0746980 c04f8c74 20000013 ffffffff c0724 >> [ 19.195709] 5e60: 0005ebb2 00000001 00000000 c0746980 c1530ac0 ee8cfe00 c1530 >> [ 19.204223] 5e80: 00000001 c07440d8 ee8cfe00 c0725edc 00000001 c0725ea8 00054 >> [ 19.212768] 5ea0: 20000013 ffffffff c0724000 c007425c 00000002 00000000 c0077 >> [ 19.221313] 5ec0: ef320b00 c0746980 00000000 c1530ac0 ef320b00 c0722ac0 c0720 >> [ 19.229858] 5ee0: c152ec20 c00696cc 00000000 00000000 c0724000 c0724000 c1524 >> [ 19.238403] 5f00: c152ec20 c0015e14 c0722ac0 c0722ac0 c0722ac0 c0722ac0 c0720 >> [ 19.246948] 5f20: c0722ac0 c0722ac0 6e6b0f0d 00000004 00000000 00000000 c0080 >> [ 19.255493] 5f40: 00000001 00000000 00000000 501539bc 00000004 c0091654 c1528 >> [ 19.264038] 5f60: c07d55b8 5006c071 00000000 c008cab8 00000000 00000002 50064 >> [ 19.272552] 5f80: c0748078 c0724000 c07c0548 c0504510 c0747e60 00000000 411f8 >> [ 19.281097] 5fa0: 00000000 c0015e14 00000000 c0743e1c c07c0480 c07057dc bfffa >> [ 19.289642] 5fc0: 00000000 c06d48d8 ffffffff ffffffff c06d4450 00000000 0000c >> [ 19.298187] 5fe0: 00000000 10c53c7d c0742d08 c07057ac c0747e54 80008044 00000 >> [ 19.306732] [<c02e13b0>] (gpio_irq_handler+0x7c/0x26c) from [<c00a3670>] (ge) >> [ 19.316558] [<c00a3670>] (generic_handle_irq+0x34/0x44) from [<c0015380>] (h) >> [ 19.325744] [<c0015380>] (handle_IRQ+0x4c/0xac) from [<c000846c>] (gic_handl) >> [ 19.334564] [<c000846c>] (gic_handle_irq+0x2c/0x60) from [<c04f8ee4>] (__irq) >> [ 19.343292] Exception stack(0xc0725e60 to 0xc0725ea8) >> [ 19.348571] 5e60: 0005ebb2 00000001 00000000 c0746980 c1530ac0 ee8cfe00 c1530 >> [ 19.357116] 5e80: 00000001 c07440d8 ee8cfe00 c0725edc 00000001 c0725ea8 00054 >> [ 19.365631] 5ea0: 20000013 ffffffff >> [ 19.369293] [<c04f8ee4>] (__irq_svc+0x44/0x5c) from [<c04f8c74>] (_raw_spin_) >> [ 19.378570] [<c04f8c74>] (_raw_spin_unlock_irq+0x28/0x2c) from [<c007425c>] ) >> [ 19.388732] [<c007425c>] (finish_task_switch+0x84/0x198) from [<c04f7760>] () >> [ 19.398193] [<c04f7760>] (__schedule+0x404/0x870) from [<c0015e14>] (cpu_idl) >> [ 19.406768] [<c0015e14>] (cpu_idle+0xe8/0x114) from [<c06d48d8>] (start_kern) >> [ 19.415466] Code: e59480e4 e1d311b4 e5d36034 e1a0a81b (e7920001) >> [ 19.421844] ---[ end trace 3eb9bf4b81babe15 ]--- >> [ 19.426666] Kernel panic - not syncing: Fatal exception in interrupt >> [ 19.433288] CPU1: stopping >> [ 19.436157] [<c001beac>] (unwind_backtrace+0x0/0xf4) from [<c0019db4>] (hand) >> [ 19.445220] [<c0019db4>] (handle_IPI+0x130/0x15c) from [<c0008498>] (gic_han) >> [ 19.454223] [<c0008498>] (gic_handle_irq+0x58/0x60) from [<c04f8ee4>] (__irq) >> [ 19.462951] Exception stack(0xef06ff88 to 0xef06ffd0) >> [ 19.468231] ff80: c079f960 c079f960 00000000 00000000 ef068 >> [ 19.476745] ffa0: c0504510 c0747e60 00000000 411fc092 c0748078 00000000 00000 >> [ 19.485290] ffc0: c0015570 c0015574 60000113 ffffffff >> [ 19.490570] [<c04f8ee4>] (__irq_svc+0x44/0x5c) from [<c0015574>] (default_id) >> [ 19.499114] [<c0015574>] (default_idle+0x20/0x44) from [<c0015dc8>] (cpu_idl) >> [ 19.507659] [<c0015dc8>] (cpu_idle+0x9c/0x114) from [<804f1d94>] (0x804f1d94) >> --- >> Tarun >>> >>> Kevin >>> >>>> drivers/gpio/gpio-omap.c | 35 +++++++++++++++++++++++++++++++++++ >>>> 1 files changed, 35 insertions(+), 0 deletions(-) >>>> >>>> diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c >>>> index e6efd77..50de875 100644 >>>> --- a/drivers/gpio/gpio-omap.c >>>> +++ b/drivers/gpio/gpio-omap.c >>>> @@ -1152,6 +1152,40 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev) >>>> return ret; >>>> } >>>> >>>> +/** >>>> + * omap_gpio_remove - cleanup a registered gpio device >>>> + * @pdev: pointer to current gpio platform device >>>> + * >>>> + * Called by driver framework whenever a gpio device is unregistered. >>>> + * GPIO is deleted from the list and associated clock handle freed. >>>> + */ >>>> +static int __devexit omap_gpio_remove(struct platform_device *pdev) >>>> +{ >>>> + struct device *dev = &pdev->dev; >>>> + struct gpio_bank *bank; >>>> + unsigned long flags; >>>> + int ret = -EINVAL; >>>> + >>>> + list_for_each_entry(bank, &omap_gpio_list, node) { >>>> + spin_lock_irqsave(&bank->lock, flags); >>>> + if (bank->dev == dev) { >>>> + clk_put(bank->dbck); >>>> + list_del(&bank->node); >>>> + ret = 0; >>>> + spin_unlock_irqrestore(&bank->lock, flags); >>>> + break; >>>> + } >>>> + spin_unlock_irqrestore(&bank->lock, flags); >>>> + } >>>> + >>>> + if (!ret) { >>>> + pm_runtime_disable(bank->dev); >>>> + irq_free_descs(bank->irq_base, bank->width); >>>> + } >>>> + >>>> + return ret; >>>> +} >>>> + >>>> #ifdef CONFIG_ARCH_OMAP2PLUS >>>> >>>> #if defined(CONFIG_PM_RUNTIME) >>>> @@ -1478,6 +1512,7 @@ MODULE_DEVICE_TABLE(of, omap_gpio_match); >>>> >>>> static struct platform_driver omap_gpio_driver = { >>>> .probe = omap_gpio_probe, >>>> + .remove = __devexit_p(omap_gpio_remove), >>>> .driver = { >>>> .name = "omap_gpio", >>>> .pm = &gpio_pm_ops, >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-omap" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Aug 10, 2012 at 11:38 AM, DebBarma, Tarun Kanti <tarun.kanti@ti.com> wrote: > > On Thu, Aug 9, 2012 at 8:28 PM, Kevin Hilman <khilman@ti.com> wrote: > > "DebBarma, Tarun Kanti" <tarun.kanti@ti.com> writes: > > > >> On Wed, Aug 8, 2012 at 10:40 PM, Kevin Hilman <khilman@ti.com> wrote: > >>> Tarun Kanti DebBarma <tarun.kanti@ti.com> writes: > >>> > >>>> Add *remove* callback so that necessary cleanup operations are > >>>> performed when device is unregistered. The device is deleted > >>>> from the list and associated clock handle is released by > >>>> calling clk_put() and irq descriptor is released using the > >>>> irq_free_desc() api. > >>>> > >>>> Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com> > >>>> Reported-by: Paul Walmsley <paul@pwsan.com> > >>>> Reviewed-by: Jon Hunter <jon-hunter@ti.com> > >>>> Cc: Kevin Hilman <khilman@ti.com> > >>>> Cc: Rajendra Nayak <rnayak@ti.com> > >>>> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> > >>>> Cc: Cousson, Benoit <b-cousson@ti.com> > >>>> Cc: Paul Walmsley <paul@pwsan.com> > >>>> --- > >>>> v2: > >>>> Baseline: > >>>> git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git > >>>> Commit: 0d7614f09c1ebdbaa1599a5aba7593f147bf96ee (Linux 3.6-rc1) > >>>> > >>>> (1) Use irq_free_descs() instead of irq_free_desc(). > >>>> Besides, irq_free_desc() was using wrong parameter, > >>>> irq_base, instead of bank->irq. > >>>> (2) irq_free_descs() moved outside spin_lock/unlock_*() > >>>> in order to avoid exception warnings. > >>>> > >>>> (3) pm_runtime_disable() added so that bind can happen successfully > >>>> > >>>> Test Detail: > >>>> Step 1: Unbind gpio.5 device in order to invoke the *remove* > >>>> callback. > >>>> #echo "omap_gpio.5" > sys/bus/platform/drivers/omap_gpio/unbind > >>>> > >>>> Step 2: Bind gpio.5 device and confirm probe() for the device > >>>> succeeds. > >>>> #echo "omap_gpio.5" > sys/bus/platform/drivers/omap_gpio/bind > >>>> > >>>> Step 3: Execute read/write GPIO test case. > >>> > >>> What happens when GPIOs are in use (requested)? > >> If I try to unbind a currently active GPIO bank then I see an exception > >> after the irq descriptor is freed by the remove. I believe this is > >> expected > >> because interrupt raised by the system would not be handled. > > > > ... and the GPIO is still configured to trigger interrupts. > Right! > > > > > The point is that there is lots to cleanup/unconfigure properly for this > > to work properly. > As far as I can think of, all active gpio requests done either in > board files or through DT > have to be freed. But if this is done then when we bind() the device > again initialization > done in omap_gpio_probe() would not restore the board/DT related > configuration. > So the point is are we supposed to do all these cleanup in *remove* > callback? > If yes, how do we manage board level gpio usage? More and more I think of the .remove() for GPIO, the interface not seems to make sense. Being an infrastructure driver which can be used by many client drivers like Ethernet, MMC card detect, sensors etc etc. And hence it can not be made a loadable module. So I am in favor of dropping the $subject patch completely unless and until we need it genuinely. Regards Santosh
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index e6efd77..50de875 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -1152,6 +1152,40 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev) return ret; } +/** + * omap_gpio_remove - cleanup a registered gpio device + * @pdev: pointer to current gpio platform device + * + * Called by driver framework whenever a gpio device is unregistered. + * GPIO is deleted from the list and associated clock handle freed. + */ +static int __devexit omap_gpio_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct gpio_bank *bank; + unsigned long flags; + int ret = -EINVAL; + + list_for_each_entry(bank, &omap_gpio_list, node) { + spin_lock_irqsave(&bank->lock, flags); + if (bank->dev == dev) { + clk_put(bank->dbck); + list_del(&bank->node); + ret = 0; + spin_unlock_irqrestore(&bank->lock, flags); + break; + } + spin_unlock_irqrestore(&bank->lock, flags); + } + + if (!ret) { + pm_runtime_disable(bank->dev); + irq_free_descs(bank->irq_base, bank->width); + } + + return ret; +} + #ifdef CONFIG_ARCH_OMAP2PLUS #if defined(CONFIG_PM_RUNTIME) @@ -1478,6 +1512,7 @@ MODULE_DEVICE_TABLE(of, omap_gpio_match); static struct platform_driver omap_gpio_driver = { .probe = omap_gpio_probe, + .remove = __devexit_p(omap_gpio_remove), .driver = { .name = "omap_gpio", .pm = &gpio_pm_ops,