| Message ID | 1345114051-3052-3-git-send-email-jason77.wang@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Aug 16, 2012 at 06:47:30PM +0800, Hui Wang wrote: > The egalax_ts driver needs to get the gpio number of the irq pin, > and use this gpio to wake up the controller. So add a note > for this change. > > Signed-off-by: Hui Wang <jason77.wang@gmail.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
diff --git a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt new file mode 100644 index 0000000..df70318 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt @@ -0,0 +1,19 @@ +* EETI eGalax Multiple Touch Controller + +Required properties: +- compatible: must be "eeti,egalax_ts" +- reg: i2c slave address +- interrupt-parent: the phandle for the interrupt controller +- interrupts: touch controller interrupt +- wakeup-gpios: the gpio pin to be used for waking up the controller + as well as uased as irq pin + +Example: + + egalax_ts@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio1>; + interrupts = <9 2>; + wakeup-gpios = <&gpio1 9 0>; + };
The egalax_ts driver needs to get the gpio number of the irq pin, and use this gpio to wake up the controller. So add a note for this change. Signed-off-by: Hui Wang <jason77.wang@gmail.com> --- .../bindings/input/touchscreen/egalax-ts.txt | 19 +++++++++++++++++++ 1 files changed, 19 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt