@@ -8,7 +8,7 @@ config SH_ETH
(CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || \
CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7619 || \
CPU_SUBTYPE_SH7724 || CPU_SUBTYPE_SH7734 || \
- CPU_SUBTYPE_SH7757 || ARCH_R8A7740)
+ CPU_SUBTYPE_SH7757 || ARCH_R8A7740 || ARCH_R8A7779)
select CRC32
select NET_CORE
select MII
@@ -18,4 +18,4 @@ config SH_ETH
Renesas SuperH Ethernet device driver.
This driver supporting CPUs are:
- SH7619, SH7710, SH7712, SH7724, SH7734, SH7763, SH7757,
- and R8A7740.
+ R8A7740 and R8A7779.
@@ -78,7 +78,7 @@ static void sh_eth_select_mii(struct net_device *ndev)
#endif
/* There is CPU dependent code */
-#if defined(CONFIG_CPU_SUBTYPE_SH7724)
+#if defined(CONFIG_CPU_SUBTYPE_SH7724) || defined(CONFIG_ARCH_R8A7779)
#define SH_ETH_RESET_DEFAULT 1
static void sh_eth_set_duplex(struct net_device *ndev)
{
@@ -93,13 +93,18 @@ static void sh_eth_set_duplex(struct net_device *ndev)
static void sh_eth_set_rate(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
+ unsigned int bits = ECMR_RTM;
+
+#if defined(CONFIG_ARCH_R8A7779)
+ bits |= ECMR_ELB;
+#endif
switch (mdp->speed) {
case 10: /* 10BASE */
- sh_eth_write(ndev, sh_eth_read(ndev, ECMR) & ~ECMR_RTM, ECMR);
+ sh_eth_write(ndev, sh_eth_read(ndev, ECMR) & ~bits, ECMR);
break;
case 100:/* 100BASE */
- sh_eth_write(ndev, sh_eth_read(ndev, ECMR) | ECMR_RTM, ECMR);
+ sh_eth_write(ndev, sh_eth_read(ndev, ECMR) | bits, ECMR);
break;
default:
break;
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> --- drivers/net/ethernet/renesas/Kconfig | 4 ++-- drivers/net/ethernet/renesas/sh_eth.c | 11 ++++++++--- 2 files changed, 10 insertions(+), 5 deletions(-)