@@ -26,6 +26,8 @@ struct mxc_nand_platform_data {
unsigned int width; /* data bus width in bytes */
unsigned int hw_ecc:1; /* 0 if suppress hardware ECC */
unsigned int flash_bbt:1; /* set to 1 to use a flash based bbt */
+ unsigned int biswap:1; /* set to 1 to swap the Bad Block Indicator
+ NFC v1 workaround */
struct mtd_partition *parts; /* partition table */
int nr_parts; /* size of parts */
};
@@ -682,6 +682,26 @@ static int mxc_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
return 0;
}
+/*
+ * Swap the BI-byte on position 0x7D0 with a data byte at 0x835.
+ * To fix a bug in NFC v1 SoC's for 2K page NAND flashes: imx27 and imx31.
+ * Warning: The same solution needs to be applied to the boot loader and the
+ * flash programmer.
+ */
+static void imx_bi_swap(struct mtd_info *mtd)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+ unsigned short temp1, temp2, new_temp1;
+
+ temp1 = *((volatile unsigned short*)(host->main_area0 + 0x7D0));
+ temp2 = *((volatile unsigned short*)(host->main_area0 + 0x834));
+ new_temp1 = (temp1 & 0xFF00) | (temp2 >> 8);
+ temp2 = (temp2 & 0x00FF) | (temp1 << 8);
+ *((volatile unsigned short*)(host->main_area0 + 0x7D0)) = new_temp1;
+ *((volatile unsigned short*)(host->main_area0 + 0x834)) = temp2;
+}
+
static u_char mxc_nand_read_byte(struct mtd_info *mtd)
{
struct nand_chip *nand_chip = mtd->priv;
@@ -1093,6 +1113,9 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
host->devtype_data->send_page(mtd, NFC_OUTPUT);
+ if ((mtd->writesize > 512) && nfc_is_v1() && host->pdata.biswap)
+ imx_bi_swap(mtd);
+
memcpy32_fromio(host->data_buf, host->main_area0,
mtd->writesize);
copy_spare(mtd, true);
@@ -1112,6 +1135,9 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
case NAND_CMD_PAGEPROG:
memcpy32_toio(host->main_area0, host->data_buf, mtd->writesize);
copy_spare(mtd, false);
+ if ((mtd->writesize > 512) && nfc_is_v1() && host->pdata.biswap)
+ imx_bi_swap(mtd);
+
host->devtype_data->send_page(mtd, NFC_INPUT);
host->devtype_data->send_cmd(host, command, true);
mxc_do_addr_cycle(mtd, column, page_addr);
Swap the BI-byte on position 0x7D0 with a data byte at 0x835. To fix a bug in Freescale imx NFC v1 SoC's for 2K page NAND flashes: imx27 and imx31. Warning: The same solution needs to be applied to the boot loader and the flash programmer. This is a modified version of patch sent by Jürgen Lambrecht : [PATCH] Add 'config IMX_NFC_V1_BISWAP' to swap the Bad block Indicator, and use for imx27pdk nand support. Signed-off-by: Gaëtan Carlier <gcembed@gmail.com> --- arch/arm/plat-mxc/include/mach/mxc_nand.h | 2 ++ drivers/mtd/nand/mxc_nand.c | 26 ++++++++++++++++++++++++++ 2 files changed, 28 insertions(+), 0 deletions(-)