| Message ID | 1346154504-5623-9-git-send-email-s.hauer@pengutronix.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, Aug 28, 2012 at 01:48:23PM +0200, Sascha Hauer wrote: > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> > > Conflicts: > arch/arm/mach-imx/clk-imx51-imx53.c Yeah, I know you have sorted out conflicts :) > --- > arch/arm/boot/dts/imx53.dtsi | 14 ++++++++++++++ > arch/arm/mach-imx/clk-imx51-imx53.c | 4 ++++ > 2 files changed, 18 insertions(+) > > diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi > index cd37165..7ec17e4 100644 > --- a/arch/arm/boot/dts/imx53.dtsi > +++ b/arch/arm/boot/dts/imx53.dtsi > @@ -189,6 +189,20 @@ > status = "disabled"; > }; > > + pwm1: pwm@53fb4000 { > + #pwm-cells = <3>; pwm-cells should be 2? > + compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; > + reg = <0x53fb4000 0x4000>; > + interrupts = <61>; > + }; > + > + pwm2: pwm@53fb8000 { > + #pwm-cells = <3>; > + compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; > + reg = <0x53fb8000 0x4000>; > + interrupts = <94>; > + }; > + > uart1: serial@53fbc000 { > compatible = "fsl,imx53-uart", "fsl,imx21-uart"; > reg = <0x53fbc000 0x4000>; > diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c > index 4bdcaa9..b522411 100644 > --- a/arch/arm/mach-imx/clk-imx51-imx53.c > +++ b/arch/arm/mach-imx/clk-imx51-imx53.c > @@ -455,6 +455,10 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, > clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "63fcc000.ssi"); > clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "50014000.ssi"); > clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "63fd0000.ssi"); > + clk_register_clkdev(clk[pwm1_ipg_gate], "ipg", "53fb4000.pwm"); > + clk_register_clkdev(clk[pwm1_hf_gate], "per", "53fb4000.pwm"); > + clk_register_clkdev(clk[pwm2_ipg_gate], "ipg", "53fb8000.pwm"); > + clk_register_clkdev(clk[pwm2_hf_gate], "per", "53fb8000.pwm"); It should be in a separate patch? > > /* set SDHC root clock to 200MHZ*/ > clk_set_rate(clk[esdhc_a_podf], 200000000); > -- > 1.7.10.4 >
On Fri, Aug 31, 2012 at 03:07:23PM +0200, Sascha Hauer wrote: > > > clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "63fcc000.ssi"); > > > clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "50014000.ssi"); > > > clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "63fd0000.ssi"); > > > + clk_register_clkdev(clk[pwm1_ipg_gate], "ipg", "53fb4000.pwm"); > > > + clk_register_clkdev(clk[pwm1_hf_gate], "per", "53fb4000.pwm"); > > > + clk_register_clkdev(clk[pwm2_ipg_gate], "ipg", "53fb8000.pwm"); > > > + clk_register_clkdev(clk[pwm2_hf_gate], "per", "53fb8000.pwm"); > > > > It should be in a separate patch? > > Should it? Surely I can do this, I had the feeling though that it > belongs together. > From patch subject, I do not expect these changes in the patch. It's okay to have it but we need a more proper patch subject then.
On Fri, Aug 31, 2012 at 06:32:20AM +0800, Shawn Guo wrote: > On Tue, Aug 28, 2012 at 01:48:23PM +0200, Sascha Hauer wrote: > > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> > > > > Conflicts: > > arch/arm/mach-imx/clk-imx51-imx53.c > > Yeah, I know you have sorted out conflicts :) :) > > > --- > > arch/arm/boot/dts/imx53.dtsi | 14 ++++++++++++++ > > arch/arm/mach-imx/clk-imx51-imx53.c | 4 ++++ > > 2 files changed, 18 insertions(+) > > > > diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi > > index cd37165..7ec17e4 100644 > > --- a/arch/arm/boot/dts/imx53.dtsi > > +++ b/arch/arm/boot/dts/imx53.dtsi > > @@ -189,6 +189,20 @@ > > status = "disabled"; > > }; > > > > + pwm1: pwm@53fb4000 { > > + #pwm-cells = <3>; > > pwm-cells should be 2? Yes, right. We have a patch internally that allows us to pass a 'inverted' flag to the pwm, hence I accidently have 3 here. > > clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "63fcc000.ssi"); > > clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "50014000.ssi"); > > clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "63fd0000.ssi"); > > + clk_register_clkdev(clk[pwm1_ipg_gate], "ipg", "53fb4000.pwm"); > > + clk_register_clkdev(clk[pwm1_hf_gate], "per", "53fb4000.pwm"); > > + clk_register_clkdev(clk[pwm2_ipg_gate], "ipg", "53fb8000.pwm"); > > + clk_register_clkdev(clk[pwm2_hf_gate], "per", "53fb8000.pwm"); > > It should be in a separate patch? Should it? Surely I can do this, I had the feeling though that it belongs together. Sascha
On Fri, Aug 31, 2012 at 03:07:23PM +0200, Sascha Hauer wrote: > On Fri, Aug 31, 2012 at 06:32:20AM +0800, Shawn Guo wrote: > > On Tue, Aug 28, 2012 at 01:48:23PM +0200, Sascha Hauer wrote: [...] > > > arch/arm/boot/dts/imx53.dtsi | 14 ++++++++++++++ > > > arch/arm/mach-imx/clk-imx51-imx53.c | 4 ++++ > > > 2 files changed, 18 insertions(+) > > > > > > diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi > > > index cd37165..7ec17e4 100644 > > > --- a/arch/arm/boot/dts/imx53.dtsi > > > +++ b/arch/arm/boot/dts/imx53.dtsi > > > @@ -189,6 +189,20 @@ > > > status = "disabled"; > > > }; > > > > > > + pwm1: pwm@53fb4000 { > > > + #pwm-cells = <3>; > > > > pwm-cells should be 2? > > Yes, right. We have a patch internally that allows us to pass a > 'inverted' flag to the pwm, hence I accidently have 3 here. There are patches in for-next that add support for setting the PWM polarity, though there's currently no support for specifying it via a third cell in the specifier. Would you mind sharing the patches that add this? Thierry
On Fri, Sep 07, 2012 at 03:29:55PM +0200, Thierry Reding wrote: > On Fri, Aug 31, 2012 at 03:07:23PM +0200, Sascha Hauer wrote: > > On Fri, Aug 31, 2012 at 06:32:20AM +0800, Shawn Guo wrote: > > > On Tue, Aug 28, 2012 at 01:48:23PM +0200, Sascha Hauer wrote: > [...] > > > > arch/arm/boot/dts/imx53.dtsi | 14 ++++++++++++++ > > > > arch/arm/mach-imx/clk-imx51-imx53.c | 4 ++++ > > > > 2 files changed, 18 insertions(+) > > > > > > > > diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi > > > > index cd37165..7ec17e4 100644 > > > > --- a/arch/arm/boot/dts/imx53.dtsi > > > > +++ b/arch/arm/boot/dts/imx53.dtsi > > > > @@ -189,6 +189,20 @@ > > > > status = "disabled"; > > > > }; > > > > > > > > + pwm1: pwm@53fb4000 { > > > > + #pwm-cells = <3>; > > > > > > pwm-cells should be 2? > > > > Yes, right. We have a patch internally that allows us to pass a > > 'inverted' flag to the pwm, hence I accidently have 3 here. > > There are patches in for-next that add support for setting the PWM > polarity, though there's currently no support for specifying it via a > third cell in the specifier. Would you mind sharing the patches that add > this? Yes, will do. I was afraid this leads to some discussion, so I skipped them so far. The basic idea was that the third cell is for flags from which bit0 set means 'inverted'. We currently implemented this i.MX specific, but if you think this is acceptable it's propably a good idea to implement this in a generic manner. Sascha
On Fri, Sep 07, 2012 at 07:26:12PM +0200, Sascha Hauer wrote: > On Fri, Sep 07, 2012 at 03:29:55PM +0200, Thierry Reding wrote: > > On Fri, Aug 31, 2012 at 03:07:23PM +0200, Sascha Hauer wrote: > > > On Fri, Aug 31, 2012 at 06:32:20AM +0800, Shawn Guo wrote: > > > > On Tue, Aug 28, 2012 at 01:48:23PM +0200, Sascha Hauer wrote: > > [...] > > > > > arch/arm/boot/dts/imx53.dtsi | 14 ++++++++++++++ > > > > > arch/arm/mach-imx/clk-imx51-imx53.c | 4 ++++ > > > > > 2 files changed, 18 insertions(+) > > > > > > > > > > diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi > > > > > index cd37165..7ec17e4 100644 > > > > > --- a/arch/arm/boot/dts/imx53.dtsi > > > > > +++ b/arch/arm/boot/dts/imx53.dtsi > > > > > @@ -189,6 +189,20 @@ > > > > > status = "disabled"; > > > > > }; > > > > > > > > > > + pwm1: pwm@53fb4000 { > > > > > + #pwm-cells = <3>; > > > > > > > > pwm-cells should be 2? > > > > > > Yes, right. We have a patch internally that allows us to pass a > > > 'inverted' flag to the pwm, hence I accidently have 3 here. > > > > There are patches in for-next that add support for setting the PWM > > polarity, though there's currently no support for specifying it via a > > third cell in the specifier. Would you mind sharing the patches that add > > this? > > Yes, will do. I was afraid this leads to some discussion, so I skipped > them so far. > > The basic idea was that the third cell is for flags from which bit0 set > means 'inverted'. We currently implemented this i.MX specific, but if > you think this is acceptable it's propably a good idea to implement this > in a generic manner. Absolutely. That's exactly what I had in mind as well, so if you have the code ready I don't have to write it myself. Thierry
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index cd37165..7ec17e4 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -189,6 +189,20 @@ status = "disabled"; }; + pwm1: pwm@53fb4000 { + #pwm-cells = <3>; + compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; + reg = <0x53fb4000 0x4000>; + interrupts = <61>; + }; + + pwm2: pwm@53fb8000 { + #pwm-cells = <3>; + compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; + reg = <0x53fb8000 0x4000>; + interrupts = <94>; + }; + uart1: serial@53fbc000 { compatible = "fsl,imx53-uart", "fsl,imx21-uart"; reg = <0x53fbc000 0x4000>; diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index 4bdcaa9..b522411 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -455,6 +455,10 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "63fcc000.ssi"); clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "50014000.ssi"); clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "63fd0000.ssi"); + clk_register_clkdev(clk[pwm1_ipg_gate], "ipg", "53fb4000.pwm"); + clk_register_clkdev(clk[pwm1_hf_gate], "per", "53fb4000.pwm"); + clk_register_clkdev(clk[pwm2_ipg_gate], "ipg", "53fb8000.pwm"); + clk_register_clkdev(clk[pwm2_hf_gate], "per", "53fb8000.pwm"); /* set SDHC root clock to 200MHZ*/ clk_set_rate(clk[esdhc_a_podf], 200000000);
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Conflicts: arch/arm/mach-imx/clk-imx51-imx53.c --- arch/arm/boot/dts/imx53.dtsi | 14 ++++++++++++++ arch/arm/mach-imx/clk-imx51-imx53.c | 4 ++++ 2 files changed, 18 insertions(+)