| Message ID | 1346673139-14540-2-git-send-email-anilkumar@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 09/03/2012 01:52 PM, AnilKumar Ch wrote: > Adopt pinctrl support to c_can driver based on c_can device > pointer, pinctrl driver configure SoC pins to d_can mode > according to definitions provided in .dts file. > > In device specific device tree file 'pinctrl-names = "default";' > and 'pinctrl-0 = <&d_can1_pins>;' needs to add to configure pins > from c_can driver. d_can1_pins node contains the pinmux/config > details of d_can L/H pins. Looks good, is the pinctrl property documented in the dt bindings already? Marc > > Signed-off-by: AnilKumar Ch <anilkumar@ti.com> > --- > drivers/net/can/c_can/c_can_platform.c | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c > index 90801c4..c351975 100644 > --- a/drivers/net/can/c_can/c_can_platform.c > +++ b/drivers/net/can/c_can/c_can_platform.c > @@ -33,6 +33,7 @@ > #include <linux/of.h> > #include <linux/of_device.h> > #include <linux/pm_runtime.h> > +#include <linux/pinctrl/consumer.h> > > #include <linux/can/dev.h> > > @@ -98,6 +99,7 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev) > struct c_can_priv *priv; > const struct of_device_id *match; > const struct platform_device_id *id; > + struct pinctrl *pinctrl; > struct resource *mem; > int irq; > struct clk *clk; > @@ -114,6 +116,11 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev) > id = platform_get_device_id(pdev); > } > > + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); > + if (IS_ERR(pinctrl)) > + dev_warn(&pdev->dev, > + "failed to configure pins from driver\n"); > + > /* get the appropriate clk */ > clk = clk_get(&pdev->dev, NULL); > if (IS_ERR(clk)) { >
Hi Marc, On Tue, Sep 04, 2012 at 02:12:04, Marc Kleine-Budde wrote: > On 09/03/2012 01:52 PM, AnilKumar Ch wrote: > > Adopt pinctrl support to c_can driver based on c_can device > > pointer, pinctrl driver configure SoC pins to d_can mode > > according to definitions provided in .dts file. > > > > In device specific device tree file 'pinctrl-names = "default";' > > and 'pinctrl-0 = <&d_can1_pins>;' needs to add to configure pins > > from c_can driver. d_can1_pins node contains the pinmux/config > > details of d_can L/H pins. > > Looks good, is the pinctrl property documented in the dt bindings already? > Yes, its here Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt Thanks AnilKumar > > > > > Signed-off-by: AnilKumar Ch <anilkumar@ti.com> > > --- > > drivers/net/can/c_can/c_can_platform.c | 7 +++++++ > > 1 file changed, 7 insertions(+) > > > > diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c > > index 90801c4..c351975 100644 > > --- a/drivers/net/can/c_can/c_can_platform.c > > +++ b/drivers/net/can/c_can/c_can_platform.c > > @@ -33,6 +33,7 @@ > > #include <linux/of.h> > > #include <linux/of_device.h> > > #include <linux/pm_runtime.h> > > +#include <linux/pinctrl/consumer.h> > > > > #include <linux/can/dev.h> > > > > @@ -98,6 +99,7 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev) > > struct c_can_priv *priv; > > const struct of_device_id *match; > > const struct platform_device_id *id; > > + struct pinctrl *pinctrl; > > struct resource *mem; > > int irq; > > struct clk *clk; > > @@ -114,6 +116,11 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev) > > id = platform_get_device_id(pdev); > > } > > > > + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); > > + if (IS_ERR(pinctrl)) > > + dev_warn(&pdev->dev, > > + "failed to configure pins from driver\n"); > > + > > /* get the appropriate clk */ > > clk = clk_get(&pdev->dev, NULL); > > if (IS_ERR(clk)) { > > > > > -- > Pengutronix e.K. | Marc Kleine-Budde | > Industrial Linux Solutions | Phone: +49-231-2826-924 | > Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | > Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de | > > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 09/04/2012 08:14 AM, AnilKumar, Chimata wrote: > Hi Marc, > > On Tue, Sep 04, 2012 at 02:12:04, Marc Kleine-Budde wrote: >> On 09/03/2012 01:52 PM, AnilKumar Ch wrote: >>> Adopt pinctrl support to c_can driver based on c_can device >>> pointer, pinctrl driver configure SoC pins to d_can mode >>> according to definitions provided in .dts file. >>> >>> In device specific device tree file 'pinctrl-names = "default";' >>> and 'pinctrl-0 = <&d_can1_pins>;' needs to add to configure pins >>> from c_can driver. d_can1_pins node contains the pinmux/config >>> details of d_can L/H pins. >> >> Looks good, is the pinctrl property documented in the dt bindings already? >> > > Yes, its here Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt Sorry, I meant not the generic pinctrl, but the c_can/d_can bindings documentation (Documentation/devicetree/bindings/net/can/). Marc
On Tue, Sep 04, 2012 at 13:12:17, Marc Kleine-Budde wrote: > On 09/04/2012 08:14 AM, AnilKumar, Chimata wrote: > > Hi Marc, > > > > On Tue, Sep 04, 2012 at 02:12:04, Marc Kleine-Budde wrote: > >> On 09/03/2012 01:52 PM, AnilKumar Ch wrote: > >>> Adopt pinctrl support to c_can driver based on c_can device > >>> pointer, pinctrl driver configure SoC pins to d_can mode > >>> according to definitions provided in .dts file. > >>> > >>> In device specific device tree file 'pinctrl-names = "default";' > >>> and 'pinctrl-0 = <&d_can1_pins>;' needs to add to configure pins > >>> from c_can driver. d_can1_pins node contains the pinmux/config > >>> details of d_can L/H pins. > >> > >> Looks good, is the pinctrl property documented in the dt bindings already? > >> > > > > Yes, its here Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt > > Sorry, I meant not the generic pinctrl, but the c_can/d_can bindings > documentation (Documentation/devicetree/bindings/net/can/). > No, I have not included because those are pinctrl driver specific bindings. If the SoC supports pinmux/conf feature then those should be added according to pinctrl driver. If the SoC is not supported pinmux/config then this configuration is not required. Thanks AnilKumar -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c index 90801c4..c351975 100644 --- a/drivers/net/can/c_can/c_can_platform.c +++ b/drivers/net/can/c_can/c_can_platform.c @@ -33,6 +33,7 @@ #include <linux/of.h> #include <linux/of_device.h> #include <linux/pm_runtime.h> +#include <linux/pinctrl/consumer.h> #include <linux/can/dev.h> @@ -98,6 +99,7 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev) struct c_can_priv *priv; const struct of_device_id *match; const struct platform_device_id *id; + struct pinctrl *pinctrl; struct resource *mem; int irq; struct clk *clk; @@ -114,6 +116,11 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev) id = platform_get_device_id(pdev); } + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) + dev_warn(&pdev->dev, + "failed to configure pins from driver\n"); + /* get the appropriate clk */ clk = clk_get(&pdev->dev, NULL); if (IS_ERR(clk)) {
Adopt pinctrl support to c_can driver based on c_can device pointer, pinctrl driver configure SoC pins to d_can mode according to definitions provided in .dts file. In device specific device tree file 'pinctrl-names = "default";' and 'pinctrl-0 = <&d_can1_pins>;' needs to add to configure pins from c_can driver. d_can1_pins node contains the pinmux/config details of d_can L/H pins. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> --- drivers/net/can/c_can/c_can_platform.c | 7 +++++++ 1 file changed, 7 insertions(+)