| Message ID | 1346233758-27009-1-git-send-email-nicolas.ferre@atmel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 08/29/2012 11:49 AM, Nicolas Ferre : > If the number of ports present on the SoC/board is not the maximum > and that the platform data is not filled with all data, there is > an easy way to mess the PIO setup for this interface. > This quick fix addresses mis-configuration in USB host platform data > that is common in at91 boards since commit 0ee6d1e (USB: ohci-at91: > change maximum number of ports) that did not modified the associatd > board files. > > Reported-by: Klaus Falkner <klaus.falkner@solectrix.de> > Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> > Cc: Alan Stern <stern@rowland.harvard.edu> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Cc: linux-usb@vger.kernel.org > Cc: Stable <stable@vger.kernel.org> [3.4+] Alan, Greg, gentle ping... I really would like to seen it landing in stable soon... Thanks, best regards, > --- > drivers/usb/host/ohci-at91.c | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c > index a665b3e..aaa8d2b 100644 > --- a/drivers/usb/host/ohci-at91.c > +++ b/drivers/usb/host/ohci-at91.c > @@ -570,6 +570,16 @@ static int __devinit ohci_hcd_at91_drv_probe(struct platform_device *pdev) > > if (pdata) { > at91_for_each_port(i) { > + /* > + * do not configure PIO if not in relation with > + * real USB port on board > + */ > + if (i >= pdata->ports) { > + pdata->vbus_pin[i] = -EINVAL; > + pdata->overcurrent_pin[i] = -EINVAL; > + break; > + } > + > if (!gpio_is_valid(pdata->vbus_pin[i])) > continue; > gpio = pdata->vbus_pin[i]; >
On Tue, 4 Sep 2012, Nicolas Ferre wrote: > On 08/29/2012 11:49 AM, Nicolas Ferre : > > If the number of ports present on the SoC/board is not the maximum > > and that the platform data is not filled with all data, there is > > an easy way to mess the PIO setup for this interface. > > This quick fix addresses mis-configuration in USB host platform data > > that is common in at91 boards since commit 0ee6d1e (USB: ohci-at91: > > change maximum number of ports) that did not modified the associatd > > board files. > > > > Reported-by: Klaus Falkner <klaus.falkner@solectrix.de> > > Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> > > Cc: Alan Stern <stern@rowland.harvard.edu> > > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > > Cc: linux-usb@vger.kernel.org > > Cc: Stable <stable@vger.kernel.org> [3.4+] > > Alan, Greg, gentle ping... > > I really would like to seen it landing in stable soon... > > Thanks, best regards, Sorry for the delay. I feel a little uncomfortable judging board-level changes like this, since I know nothing about the hardware details. Still, for what it's worth, this patch is okay as far as the core ohci-hcd driver components are concerned. So... Acked-by: Alan Stern <stern@rowland.harvard.edu>
On Wed, Aug 29, 2012 at 11:49 AM, Nicolas Ferre <nicolas.ferre@atmel.com> wrote: > If the number of ports present on the SoC/board is not the maximum > and that the platform data is not filled with all data, there is > an easy way to mess the PIO setup for this interface. > This quick fix addresses mis-configuration in USB host platform data > that is common in at91 boards since commit 0ee6d1e (USB: ohci-at91: > change maximum number of ports) that did not modified the associatd > board files. > > Reported-by: Klaus Falkner <klaus.falkner@solectrix.de> > Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> > Cc: Alan Stern <stern@rowland.harvard.edu> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Cc: linux-usb@vger.kernel.org > Cc: Stable <stable@vger.kernel.org> [3.4+] > --- > drivers/usb/host/ohci-at91.c | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c > index a665b3e..aaa8d2b 100644 > --- a/drivers/usb/host/ohci-at91.c > +++ b/drivers/usb/host/ohci-at91.c > @@ -570,6 +570,16 @@ static int __devinit ohci_hcd_at91_drv_probe(struct platform_device *pdev) > > if (pdata) { > at91_for_each_port(i) { > + /* > + * do not configure PIO if not in relation with > + * real USB port on board > + */ > + if (i >= pdata->ports) { > + pdata->vbus_pin[i] = -EINVAL; > + pdata->overcurrent_pin[i] = -EINVAL; > + break; > + } > + > if (!gpio_is_valid(pdata->vbus_pin[i])) > continue; > gpio = pdata->vbus_pin[i]; > -- > 1.7.10 > Hi, This commit causes a NULL point exception on my board with the following message: [ 7.740000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 7.810000] Unable to handle kernel NULL pointer dereference at virtual address 00000028 [ 7.810000] pgd = c3a38000 [ 7.810000] [00000028] *pgd=23a8c831, *pte=00000000, *ppte=00000000 [ 7.810000] Internal error: Oops: 17 [#1] PREEMPT ARM [ 7.810000] Modules linked in: ohci_hcd(+) regmap_i2c snd_pcm usbcore snd_page_alloc at91_cf snd_timer pcmcia_rsrc snd soundcore gpio_keys regmap_spi pcmcia_core usb_common nls_base [ 7.810000] CPU: 0 Not tainted (3.6.0-rc6-mpa+ #264) [ 7.810000] PC is at __gpio_to_irq+0x18/0x40 [ 7.810000] LR is at ohci_hcd_at91_overcurrent_irq+0x24/0xb4 [ohci_hcd] [ 7.810000] pc : [<c01392d4>] lr : [<bf08f694>] psr: 40000093 [ 7.810000] sp : c3a11c40 ip : c3a11c50 fp : c3a11c4c [ 7.810000] r10: 00000000 r9 : c02dcd6e r8 : fefff400 [ 7.810000] r7 : 00000000 r6 : c02cc928 r5 : 00000030 r4 : c02dd168 [ 7.810000] r3 : c02e7350 r2 : ffffffea r1 : c02cc928 r0 : 00000000 [ 7.810000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 7.810000] Control: c000717f Table: 23a38000 DAC: 00000015 [ 7.810000] Process modprobe (pid: 285, stack limit = 0xc3a10270) [ 7.810000] Stack: (0xc3a11c40 to 0xc3a12000) [ 7.810000] 1c40: c3a11c6c c3a11c50 bf08f694 c01392cc c3a11c84 c2c38b00 c3806900 00000030 [ 7.810000] 1c60: c3a11ca4 c3a11c70 c0051264 bf08f680 c3a11cac c3a11c80 c003e764 c3806900 [ 7.810000] 1c80: c2c38b00 c02cb05c c02cb000 fefff400 c3806930 c3a11cf4 c3a11cbc c3a11ca8 [ 7.810000] 1ca0: c005142c c005123c c3806900 c3805a00 c3a11cd4 c3a11cc0 c0053f24 c00513e4 [ 7.810000] 1cc0: c3a11cf4 00000030 c3a11cec c3a11cd8 c005120c c0053e88 00000000 00000000 [ 7.810000] 1ce0: c3a11d1c c3a11cf0 c00124d0 c00511e0 01400000 00000001 00000012 00000000 [ 7.810000] 1d00: ffffffff c3a11d94 00000030 00000000 c3a11d34 c3a11d20 c005120c c0012438 [ 7.810000] 1d20: c001dac4 00000012 c3a11d4c c3a11d38 c0009b08 c00511e0 c00523fc 60000013 [ 7.810000] 1d40: c3a11d5c c3a11d50 c0008510 c0009ab4 c3a11ddc c3a11d60 c0008eb4 c00084f0 [ 7.810000] 1d60: 00000000 00000030 00000000 00000080 60000013 bf08f670 c3806900 c2c38b00 [ 7.810000] 1d80: 00000030 c3806930 00000000 c3a11ddc c3a11d88 c3a11da8 c0054190 c00523fc [ 7.810000] 1da0: 60000013 ffffffff c3a11dec c3a11db8 00000000 c2c38b00 bf08f670 c3806900 [ 7.810000] 1dc0: 00000000 00000080 c02cc928 00000030 c3a11e0c c3a11de0 c0052764 c00520d8 [ 7.810000] 1de0: c3a11dfc 00000000 00000000 00000002 bf090f61 00000004 c02cc930 c02cc928 [ 7.810000] 1e00: c3a11e4c c3a11e10 bf090978 c005269c bf090f61 c02cc928 bf093000 c02dd170 [ 7.810000] 1e20: c3a11e3c c02cc930 c02cc930 bf0911d0 bf0911d0 bf093000 c3a10000 00000000 [ 7.810000] 1e40: c3a11e5c c3a11e50 c0155b7c bf090808 c3a11e7c c3a11e60 c0154690 c0155b6c [ 7.810000] 1e60: c02cc930 c02cc964 bf0911d0 c3a11ea0 c3a11e9c c3a11e80 c015484c c01545e8 [ 7.810000] 1e80: 00000000 00000000 c01547e4 bf0911d0 c3a11ec4 c3a11ea0 c0152e58 c01547f4 [ 7.810000] 1ea0: c381b88c c384ab10 c2c10540 bf0911d0 00000000 c02d7518 c3a11ed4 c3a11ec8 [ 7.810000] 1ec0: c01544c0 c0152e0c c3a11efc c3a11ed8 c01536cc c01544b0 bf091075 c3a11ee8 [ 7.810000] 1ee0: bf049af0 bf09120c bf0911d0 00000000 c3a11f1c c3a11f00 c0154e9c c0153628 [ 7.810000] 1f00: bf049af0 bf09120c 000ae190 00000000 c3a11f2c c3a11f20 c0155f58 c0154e04 [ 7.810000] 1f20: c3a11f44 c3a11f30 bf093054 c0155f1c 00000000 00006a4f c3a11f7c c3a11f48 [ 7.810000] 1f40: c0008638 bf093010 bf09120c 000ae190 00000000 c00093c4 00006a4f bf09120c [ 7.810000] 1f60: 000ae190 00000000 c00093c4 00000000 c3a11fa4 c3a11f80 c004fdc4 c000859c [ 7.810000] 1f80: c3a11fa4 000ae190 00006a4f 00016eb8 000ad018 00000080 00000000 c3a11fa8 [ 7.810000] 1fa0: c0009260 c004fd58 00006a4f 00016eb8 000ae190 00006a4f 000ae100 00000000 [ 7.810000] 1fc0: 00006a4f 00016eb8 000ad018 00000080 000adba0 000ad208 00000000 000ad3d8 [ 7.810000] 1fe0: beaf7ae8 beaf7ad8 000172b8 b6e4e940 20000010 000ae190 00000000 00000000 [ 7.810000] Backtrace: [ 7.810000] [<c01392bc>] (__gpio_to_irq+0x0/0x40) from [<bf08f694>] (ohci_hcd_at91_overcurrent_irq+0x24/0xb4 [ohci_hcd]) [ 7.810000] [<bf08f670>] (ohci_hcd_at91_overcurrent_irq+0x0/0xb4 [ohci_hcd]) from [<c0051264>] (handle_irq_event_percpu+0x38/0x1a8) [ 7.810000] r6:00000030 r5:c3806900 r4:c2c38b00 [ 7.810000] [<c005122c>] (handle_irq_event_percpu+0x0/0x1a8) from [<c005142c>] (handle_irq_event+0x58/0x7c) [ 7.810000] [<c00513d4>] (handle_irq_event+0x0/0x7c) from [<c0053f24>] (handle_simple_irq+0xac/0xd8) [ 7.810000] r5:c3805a00 r4:c3806900 [ 7.810000] [<c0053e78>] (handle_simple_irq+0x0/0xd8) from [<c005120c>] (generic_handle_irq+0x3c/0x48) [ 7.810000] r4:00000030 [ 7.810000] [<c00511d0>] (generic_handle_irq+0x0/0x48) from [<c00124d0>] (gpio_irq_handler+0xa8/0xfc) [ 7.810000] r4:00000000 [ 7.810000] [<c0012428>] (gpio_irq_handler+0x0/0xfc) from [<c005120c>] (generic_handle_irq+0x3c/0x48) [ 7.810000] [<c00511d0>] (generic_handle_irq+0x0/0x48) from [<c0009b08>] (handle_IRQ+0x64/0x88) [ 7.810000] r4:00000012 [ 7.810000] [<c0009aa4>] (handle_IRQ+0x0/0x88) from [<c0008510>] (at91_aic_handle_irq+0x30/0x38) [ 7.810000] r5:60000013 r4:c00523fc [ 7.810000] [<c00084e0>] (at91_aic_handle_irq+0x0/0x38) from [<c0008eb4>] (__irq_svc+0x34/0x60) [ 7.810000] Exception stack(0xc3a11d60 to 0xc3a11da8) [ 7.810000] 1d60: 00000000 00000030 00000000 00000080 60000013 bf08f670 c3806900 c2c38b00 [ 7.810000] 1d80: 00000030 c3806930 00000000 c3a11ddc c3a11d88 c3a11da8 c0054190 c00523fc [ 7.810000] 1da0: 60000013 ffffffff [ 7.810000] [<c00520c8>] (__setup_irq+0x0/0x458) from [<c0052764>] (request_threaded_irq+0xd8/0x134) [ 7.810000] [<c005268c>] (request_threaded_irq+0x0/0x134) from [<bf090978>] (ohci_hcd_at91_drv_probe+0x180/0x41c [ohci_hcd]) [ 7.810000] [<bf0907f8>] (ohci_hcd_at91_drv_probe+0x0/0x41c [ohci_hcd]) from [<c0155b7c>] (platform_drv_probe+0x20/0x24) [ 7.810000] [<c0155b5c>] (platform_drv_probe+0x0/0x24) from [<c0154690>] (driver_probe_device+0xb8/0x20c) [ 7.810000] [<c01545d8>] (driver_probe_device+0x0/0x20c) from [<c015484c>] (__driver_attach+0x68/0x88) [ 7.810000] r7:c3a11ea0 r6:bf0911d0 r5:c02cc964 r4:c02cc930 [ 7.810000] [<c01547e4>] (__driver_attach+0x0/0x88) from [<c0152e58>] (bus_for_each_dev+0x5c/0x9c) [ 7.810000] r6:bf0911d0 r5:c01547e4 r4:00000000 [ 7.810000] [<c0152dfc>] (bus_for_each_dev+0x0/0x9c) from [<c01544c0>] (driver_attach+0x20/0x28) [ 7.810000] r7:c02d7518 r6:00000000 r5:bf0911d0 r4:c2c10540 [ 7.810000] [<c01544a0>] (driver_attach+0x0/0x28) from [<c01536cc>] (bus_add_driver+0xb4/0x22c) [ 7.810000] [<c0153618>] (bus_add_driver+0x0/0x22c) from [<c0154e9c>] (driver_register+0xa8/0x144) [ 7.810000] r7:00000000 r6:bf0911d0 r5:bf09120c r4:bf049af0 [ 7.810000] [<c0154df4>] (driver_register+0x0/0x144) from [<c0155f58>] (platform_driver_register+0x4c/0x60) [ 7.810000] r7:00000000 r6:000ae190 r5:bf09120c r4:bf049af0 [ 7.810000] [<c0155f0c>] (platform_driver_register+0x0/0x60) from [<bf093054>] (ohci_hcd_mod_init+0x54/0x8c [ohci_hcd]) [ 7.810000] [<bf093000>] (ohci_hcd_mod_init+0x0/0x8c [ohci_hcd]) from [<c0008638>] (do_one_initcall+0xac/0x174) [ 7.810000] r4:00006a4f [ 7.810000] [<c000858c>] (do_one_initcall+0x0/0x174) from [<c004fdc4>] (sys_init_module+0x7c/0x1a0) [ 7.810000] [<c004fd48>] (sys_init_module+0x0/0x1a0) from [<c0009260>] (ret_fast_syscall+0x0/0x2c) [ 7.810000] r7:00000080 r6:000ad018 r5:00016eb8 r4:00006a4f [ 7.810000] Code: e24cb004 e59f3028 e1a02000 e7930180 (e5903028) [ 7.810000] ---[ end trace 85aa37ed128143b5 ]--- [ 7.810000] Kernel panic - not syncing: Fatal exception in interrupt Reverting it from Linus master (commit 6fffb77c839315) makes the NULL pointer go away. [ 7.990000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 8.110000] at91_ohci at91_ohci: can't request overcurrent gpio 0 [ 8.110000] at91_ohci at91_ohci: AT91 OHCI [ 8.270000] at91_ohci at91_ohci: new USB bus registered, assigned bus number 1 [ 8.340000] at91_ohci at91_ohci: irq 39, io mem 0x00300000 [ 8.520000] hub 1-0:1.0: USB hub found [ 8.660000] hub 1-0:1.0: 1 port detected I assume this commit tried to fix the "can't request overcurrent gpio 0" message. I am running a custom board with AT91RM9200 and 1 USB host port. regards Joachim Eastwood
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index a665b3e..aaa8d2b 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -570,6 +570,16 @@ static int __devinit ohci_hcd_at91_drv_probe(struct platform_device *pdev) if (pdata) { at91_for_each_port(i) { + /* + * do not configure PIO if not in relation with + * real USB port on board + */ + if (i >= pdata->ports) { + pdata->vbus_pin[i] = -EINVAL; + pdata->overcurrent_pin[i] = -EINVAL; + break; + } + if (!gpio_is_valid(pdata->vbus_pin[i])) continue; gpio = pdata->vbus_pin[i];
If the number of ports present on the SoC/board is not the maximum and that the platform data is not filled with all data, there is an easy way to mess the PIO setup for this interface. This quick fix addresses mis-configuration in USB host platform data that is common in at91 boards since commit 0ee6d1e (USB: ohci-at91: change maximum number of ports) that did not modified the associatd board files. Reported-by: Klaus Falkner <klaus.falkner@solectrix.de> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: Stable <stable@vger.kernel.org> [3.4+] --- drivers/usb/host/ohci-at91.c | 10 ++++++++++ 1 file changed, 10 insertions(+)