| Message ID | 20120906185832.1172.31013.stgit@muffinssi.local (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
* Tony Lindgren <tony@atomide.com> [120906 11:59]: > Request pins using pinctrl framework. Only show a warning > on error as some boards set the pins in the bootloader > even if CONFIG_PINCTRL is enabled. > > Cc: linux-serial@vger.kernel.org > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Signed-off-by: Tony Lindgren <tony@atomide.com> > --- Greg, this patch should be OK for you to pick, it should not break anything even if pinctrl is not available yet. Let me know if it needs rebasing on top of other things you've queued for omap-serial. Regards, Tony > arch/arm/plat-omap/include/plat/omap-serial.h | 1 + > drivers/tty/serial/omap-serial.c | 10 ++++++++++ > 2 files changed, 11 insertions(+) > > diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h > index 1a52725..0f4de14 100644 > --- a/arch/arm/plat-omap/include/plat/omap-serial.h > +++ b/arch/arm/plat-omap/include/plat/omap-serial.h > @@ -106,6 +106,7 @@ struct uart_omap_port { > struct uart_port port; > struct uart_omap_dma uart_dma; > struct platform_device *pdev; > + struct pinctrl *pins; > > unsigned char ier; > unsigned char lcr; > diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c > index d3cda0c..068e88c 100644 > --- a/drivers/tty/serial/omap-serial.c > +++ b/drivers/tty/serial/omap-serial.c > @@ -39,6 +39,7 @@ > #include <linux/irq.h> > #include <linux/pm_runtime.h> > #include <linux/of.h> > +#include <linux/pinctrl/consumer.h> > > #include <plat/dma.h> > #include <plat/dmtimer.h> > @@ -1492,6 +1493,13 @@ static int serial_omap_probe(struct platform_device *pdev) > goto err_port_line; > } > > + up->pins = pinctrl_get_select_default(&pdev->dev); > + if (IS_ERR(up->pins)) { > + dev_warn(&pdev->dev, "did not get pins for uart%i error: %li\n", > + up->port.line, PTR_ERR(up->pins)); > + up->pins = NULL; > + } > + > sprintf(up->name, "OMAP UART%d", up->port.line); > up->port.mapbase = mem->start; > up->port.membase = devm_ioremap(&pdev->dev, mem->start, > @@ -1570,6 +1578,8 @@ static int serial_omap_remove(struct platform_device *dev) > pm_runtime_disable(&up->pdev->dev); > uart_remove_one_port(&serial_omap_reg, &up->port); > pm_qos_remove_request(&up->pm_qos_request); > + if (up->pins) > + pinctrl_put(up->pins); > } > > platform_set_drvdata(dev, NULL); > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On Thu, Sep 06, 2012 at 11:58:32AM -0700, Tony Lindgren wrote: > Request pins using pinctrl framework. Only show a warning > on error as some boards set the pins in the bootloader > even if CONFIG_PINCTRL is enabled. > > Cc: linux-serial@vger.kernel.org > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Signed-off-by: Tony Lindgren <tony@atomide.com> > --- > arch/arm/plat-omap/include/plat/omap-serial.h | 1 + > drivers/tty/serial/omap-serial.c | 10 ++++++++++ > 2 files changed, 11 insertions(+) > > diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h > index 1a52725..0f4de14 100644 > --- a/arch/arm/plat-omap/include/plat/omap-serial.h > +++ b/arch/arm/plat-omap/include/plat/omap-serial.h > @@ -106,6 +106,7 @@ struct uart_omap_port { > struct uart_port port; > struct uart_omap_dma uart_dma; > struct platform_device *pdev; > + struct pinctrl *pins; this won't apply to Greg's tty-next as I moved this structure to the C file :-s
* Felipe Balbi <balbi@ti.com> [120906 13:01]: > Hi, > > On Thu, Sep 06, 2012 at 11:58:32AM -0700, Tony Lindgren wrote: > > Request pins using pinctrl framework. Only show a warning > > on error as some boards set the pins in the bootloader > > even if CONFIG_PINCTRL is enabled. > > > > Cc: linux-serial@vger.kernel.org > > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > > Signed-off-by: Tony Lindgren <tony@atomide.com> > > --- > > arch/arm/plat-omap/include/plat/omap-serial.h | 1 + > > drivers/tty/serial/omap-serial.c | 10 ++++++++++ > > 2 files changed, 11 insertions(+) > > > > diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h > > index 1a52725..0f4de14 100644 > > --- a/arch/arm/plat-omap/include/plat/omap-serial.h > > +++ b/arch/arm/plat-omap/include/plat/omap-serial.h > > @@ -106,6 +106,7 @@ struct uart_omap_port { > > struct uart_port port; > > struct uart_omap_dma uart_dma; > > struct platform_device *pdev; > > + struct pinctrl *pins; > > this won't apply to Greg's tty-next as I moved this structure to the C > file :-s Hmm the tty-next fails to build right now for omaps: drivers/tty/serial/omap-serial.c: In function ‘serial_omap_set_mctrl’: drivers/tty/serial/omap-serial.c:514: error: ‘struct uart_omap_port’ has no member named ‘DTR_gpio’ Maybe check how you want to fix that first? I can then update my patch for tty-next. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Tony, On Fri, Sep 07, 2012 at 00:28:32, Tony Lindgren wrote: > Request pins using pinctrl framework. Only show a warning > on error as some boards set the pins in the bootloader > even if CONFIG_PINCTRL is enabled. > > Cc: linux-serial@vger.kernel.org > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Signed-off-by: Tony Lindgren <tony@atomide.com> > --- > arch/arm/plat-omap/include/plat/omap-serial.h | 1 + > drivers/tty/serial/omap-serial.c | 10 ++++++++++ > 2 files changed, 11 insertions(+) > > diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h > index 1a52725..0f4de14 100644 > --- a/arch/arm/plat-omap/include/plat/omap-serial.h > +++ b/arch/arm/plat-omap/include/plat/omap-serial.h > @@ -106,6 +106,7 @@ struct uart_omap_port { > struct uart_port port; > struct uart_omap_dma uart_dma; > struct platform_device *pdev; > + struct pinctrl *pins; > > unsigned char ier; > unsigned char lcr; > diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c > index d3cda0c..068e88c 100644 > --- a/drivers/tty/serial/omap-serial.c > +++ b/drivers/tty/serial/omap-serial.c > @@ -39,6 +39,7 @@ > #include <linux/irq.h> > #include <linux/pm_runtime.h> > #include <linux/of.h> > +#include <linux/pinctrl/consumer.h> > > #include <plat/dma.h> > #include <plat/dmtimer.h> > @@ -1492,6 +1493,13 @@ static int serial_omap_probe(struct platform_device *pdev) > goto err_port_line; > } > > + up->pins = pinctrl_get_select_default(&pdev->dev); > + if (IS_ERR(up->pins)) { > + dev_warn(&pdev->dev, "did not get pins for uart%i error: %li\n", > + up->port.line, PTR_ERR(up->pins)); > + up->pins = NULL; > + } > + > sprintf(up->name, "OMAP UART%d", up->port.line); > up->port.mapbase = mem->start; > up->port.membase = devm_ioremap(&pdev->dev, mem->start, > @@ -1570,6 +1578,8 @@ static int serial_omap_remove(struct platform_device *dev) > pm_runtime_disable(&up->pdev->dev); > uart_remove_one_port(&serial_omap_reg, &up->port); > pm_qos_remove_request(&up->pm_qos_request); > + if (up->pins) > + pinctrl_put(up->pins); I think this can be removed if we use devm_pinctrl_get_select_default() above. Thanks AnilKumar -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On Thu, Sep 06, 2012 at 02:17:26PM -0700, Tony Lindgren wrote: > * Felipe Balbi <balbi@ti.com> [120906 13:01]: > > Hi, > > > > On Thu, Sep 06, 2012 at 11:58:32AM -0700, Tony Lindgren wrote: > > > Request pins using pinctrl framework. Only show a warning > > > on error as some boards set the pins in the bootloader > > > even if CONFIG_PINCTRL is enabled. > > > > > > Cc: linux-serial@vger.kernel.org > > > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > > > Signed-off-by: Tony Lindgren <tony@atomide.com> > > > --- > > > arch/arm/plat-omap/include/plat/omap-serial.h | 1 + > > > drivers/tty/serial/omap-serial.c | 10 ++++++++++ > > > 2 files changed, 11 insertions(+) > > > > > > diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h > > > index 1a52725..0f4de14 100644 > > > --- a/arch/arm/plat-omap/include/plat/omap-serial.h > > > +++ b/arch/arm/plat-omap/include/plat/omap-serial.h > > > @@ -106,6 +106,7 @@ struct uart_omap_port { > > > struct uart_port port; > > > struct uart_omap_dma uart_dma; > > > struct platform_device *pdev; > > > + struct pinctrl *pins; > > > > this won't apply to Greg's tty-next as I moved this structure to the C > > file :-s > > Hmm the tty-next fails to build right now for omaps: > > drivers/tty/serial/omap-serial.c: In function ‘serial_omap_set_mctrl’: > drivers/tty/serial/omap-serial.c:514: error: ‘struct uart_omap_port’ has no member named ‘DTR_gpio’ > > Maybe check how you want to fix that first? I can then update > my patch for tty-next. oops, my bad. Patch sent.
* AnilKumar, Chimata <anilkumar@ti.com> [120906 20:27]: > Hi Tony, > > On Fri, Sep 07, 2012 at 00:28:32, Tony Lindgren wrote: > > Request pins using pinctrl framework. Only show a warning > > on error as some boards set the pins in the bootloader > > even if CONFIG_PINCTRL is enabled. > > > > Cc: linux-serial@vger.kernel.org > > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > > Signed-off-by: Tony Lindgren <tony@atomide.com> > > --- > > arch/arm/plat-omap/include/plat/omap-serial.h | 1 + > > drivers/tty/serial/omap-serial.c | 10 ++++++++++ > > 2 files changed, 11 insertions(+) > > > > diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h > > index 1a52725..0f4de14 100644 > > --- a/arch/arm/plat-omap/include/plat/omap-serial.h > > +++ b/arch/arm/plat-omap/include/plat/omap-serial.h > > @@ -106,6 +106,7 @@ struct uart_omap_port { > > struct uart_port port; > > struct uart_omap_dma uart_dma; > > struct platform_device *pdev; > > + struct pinctrl *pins; > > > > unsigned char ier; > > unsigned char lcr; > > diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c > > index d3cda0c..068e88c 100644 > > --- a/drivers/tty/serial/omap-serial.c > > +++ b/drivers/tty/serial/omap-serial.c > > @@ -39,6 +39,7 @@ > > #include <linux/irq.h> > > #include <linux/pm_runtime.h> > > #include <linux/of.h> > > +#include <linux/pinctrl/consumer.h> > > > > #include <plat/dma.h> > > #include <plat/dmtimer.h> > > @@ -1492,6 +1493,13 @@ static int serial_omap_probe(struct platform_device *pdev) > > goto err_port_line; > > } > > > > + up->pins = pinctrl_get_select_default(&pdev->dev); > > + if (IS_ERR(up->pins)) { > > + dev_warn(&pdev->dev, "did not get pins for uart%i error: %li\n", > > + up->port.line, PTR_ERR(up->pins)); > > + up->pins = NULL; > > + } > > + > > sprintf(up->name, "OMAP UART%d", up->port.line); > > up->port.mapbase = mem->start; > > up->port.membase = devm_ioremap(&pdev->dev, mem->start, > > @@ -1570,6 +1578,8 @@ static int serial_omap_remove(struct platform_device *dev) > > pm_runtime_disable(&up->pdev->dev); > > uart_remove_one_port(&serial_omap_reg, &up->port); > > pm_qos_remove_request(&up->pm_qos_request); > > + if (up->pins) > > + pinctrl_put(up->pins); > > I think this can be removed if we use devm_pinctrl_get_select_default() > above. Yeah will do, I was initially thinking that would cause issues remuxing pins back to safe mode on unload, but we can still do that in serial_omap_remove(). Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
* Tony Lindgren <tony@atomide.com> [120907 10:29]: > * AnilKumar, Chimata <anilkumar@ti.com> [120906 20:27]: > > > @@ -1570,6 +1578,8 @@ static int serial_omap_remove(struct platform_device *dev) > > > pm_runtime_disable(&up->pdev->dev); > > > uart_remove_one_port(&serial_omap_reg, &up->port); > > > pm_qos_remove_request(&up->pm_qos_request); > > > + if (up->pins) > > > + pinctrl_put(up->pins); > > > > I think this can be removed if we use devm_pinctrl_get_select_default() > > above. > > Yeah will do, I was initially thinking that would cause issues remuxing > pins back to safe mode on unload, but we can still do that in > serial_omap_remove(). Sent now as a separate patch with subject "[PATCH] serial: omap: Request pins using pinctrl framework". Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index 1a52725..0f4de14 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -106,6 +106,7 @@ struct uart_omap_port { struct uart_port port; struct uart_omap_dma uart_dma; struct platform_device *pdev; + struct pinctrl *pins; unsigned char ier; unsigned char lcr; diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index d3cda0c..068e88c 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -39,6 +39,7 @@ #include <linux/irq.h> #include <linux/pm_runtime.h> #include <linux/of.h> +#include <linux/pinctrl/consumer.h> #include <plat/dma.h> #include <plat/dmtimer.h> @@ -1492,6 +1493,13 @@ static int serial_omap_probe(struct platform_device *pdev) goto err_port_line; } + up->pins = pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(up->pins)) { + dev_warn(&pdev->dev, "did not get pins for uart%i error: %li\n", + up->port.line, PTR_ERR(up->pins)); + up->pins = NULL; + } + sprintf(up->name, "OMAP UART%d", up->port.line); up->port.mapbase = mem->start; up->port.membase = devm_ioremap(&pdev->dev, mem->start, @@ -1570,6 +1578,8 @@ static int serial_omap_remove(struct platform_device *dev) pm_runtime_disable(&up->pdev->dev); uart_remove_one_port(&serial_omap_reg, &up->port); pm_qos_remove_request(&up->pm_qos_request); + if (up->pins) + pinctrl_put(up->pins); } platform_set_drvdata(dev, NULL);
Request pins using pinctrl framework. Only show a warning on error as some boards set the pins in the bootloader even if CONFIG_PINCTRL is enabled. Cc: linux-serial@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/plat-omap/include/plat/omap-serial.h | 1 + drivers/tty/serial/omap-serial.c | 10 ++++++++++ 2 files changed, 11 insertions(+) -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html