| Message ID | 1347443732-7411-6-git-send-email-j-pihet@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Jean Pihet <jean.pihet@newoldbits.com> writes: > Trace the power domain transitions using the functional power states, > which include the power and logic states. Just to be clear, this means that a trace will only contain functional power state changes, not logical ones, correct? > While at it, fix the trace in the case a power domain did not hit > the desired state, as reported by Paul Walmsley. What was broken here? needs a bit more description. To me it sounds like a fix that should be a separate patch. > Reported-by: Paul Walmsley <paul@pwsan.com> > Signed-off-by: Jean Pihet <j-pihet@ti.com> > --- > arch/arm/mach-omap2/powerdomain.c | 23 +++++++++++++---------- > 1 files changed, 13 insertions(+), 10 deletions(-) > > diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c > index 267241f..2277ad3 100644 > --- a/arch/arm/mach-omap2/powerdomain.c > +++ b/arch/arm/mach-omap2/powerdomain.c > @@ -144,7 +144,7 @@ static void _update_logic_membank_counters(struct powerdomain *pwrdm) > static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag) > { > > - int prev, state, trace_state = 0; > + int prev, next, state, trace_state; > > if (pwrdm == NULL) > return -EINVAL; > @@ -165,10 +165,10 @@ static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag) > * If the power domain did not hit the desired state, > * generate a trace event with both the desired and hit states > */ > - if (state != prev) { > + next = pwrdm_read_next_fpwrst(pwrdm); > + if (next != prev) { > trace_state = (PWRDM_TRACE_STATES_FLAG | > - ((state & OMAP_POWERSTATE_MASK) << 8) | > - ((prev & OMAP_POWERSTATE_MASK) << 0)); > + (next << 8) | (prev << 0)); > trace_power_domain_target(pwrdm->name, trace_state, > smp_processor_id()); > } > @@ -723,6 +723,10 @@ int pwrdm_set_fpwrst(struct powerdomain *pwrdm, enum pwrdm_func_state fpwrst) > } > } > > + /* Trace the pwrdm desired target state */ > + trace_power_domain_target(pwrdm->name, next_fpwrst, > + smp_processor_id()); Use of smp_processor_id() here will require the same care as pointed out by Roger Quadros in [PATCH] perf: Use raw_smp_processor_id insted of smp_processor_id. Kevin > if (logic != pwrdm_read_logic_retst(pwrdm)) > pwrdm_set_logic_retst(pwrdm, logic); > > @@ -776,6 +780,10 @@ int pwrdm_set_next_fpwrst(struct powerdomain *pwrdm, > > spin_lock_irqsave(&pwrdm->lock, flags); > > + /* Trace the pwrdm desired target state */ > + trace_power_domain_target(pwrdm->name, fpwrst, > + smp_processor_id()); > + > ret = pwrdm_set_logic_retst(pwrdm, logic); > if (ret) > pr_err("%s: unable to set logic state %0x of powerdomain: %s\n", > @@ -821,13 +829,8 @@ int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst) > pr_debug("powerdomain: setting next powerstate for %s to %0x\n", > pwrdm->name, pwrst); > > - if (arch_pwrdm && arch_pwrdm->pwrdm_set_next_pwrst) { > - /* Trace the pwrdm desired target state */ > - trace_power_domain_target(pwrdm->name, pwrst, > - smp_processor_id()); > - /* Program the pwrdm desired target state */ > + if (arch_pwrdm && arch_pwrdm->pwrdm_set_next_pwrst) > ret = arch_pwrdm->pwrdm_set_next_pwrst(pwrdm, pwrst); > - } > > return ret; > } -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
HI Kevin, On Thu, Sep 13, 2012 at 1:47 AM, Kevin Hilman <khilman@deeprootsystems.com> wrote: > Jean Pihet <jean.pihet@newoldbits.com> writes: > >> Trace the power domain transitions using the functional power states, >> which include the power and logic states. > > Just to be clear, this means that a trace will only contain functional > power state changes, not logical ones, correct? Correct! The trace reports functional states, while pr_err and pr_debug statements (added by patch 6/7) are present for hardcore debugging on the functional and internal states. > >> While at it, fix the trace in the case a power domain did not hit >> the desired state, as reported by Paul Walmsley. > > What was broken here? needs a bit more description. Ok will do > To me it sounds > like a fix that should be a separate patch. I kept the fix in this patch since it matches $SUBJECT. Can be split if needed though. Thanks for reviewing! Jean > >> Reported-by: Paul Walmsley <paul@pwsan.com> >> Signed-off-by: Jean Pihet <j-pihet@ti.com> >> --- >> arch/arm/mach-omap2/powerdomain.c | 23 +++++++++++++---------- >> 1 files changed, 13 insertions(+), 10 deletions(-) >> >> diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c >> index 267241f..2277ad3 100644 >> --- a/arch/arm/mach-omap2/powerdomain.c >> +++ b/arch/arm/mach-omap2/powerdomain.c >> @@ -144,7 +144,7 @@ static void _update_logic_membank_counters(struct powerdomain *pwrdm) >> static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag) >> { >> >> - int prev, state, trace_state = 0; >> + int prev, next, state, trace_state; >> >> if (pwrdm == NULL) >> return -EINVAL; >> @@ -165,10 +165,10 @@ static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag) >> * If the power domain did not hit the desired state, >> * generate a trace event with both the desired and hit states >> */ >> - if (state != prev) { >> + next = pwrdm_read_next_fpwrst(pwrdm); >> + if (next != prev) { >> trace_state = (PWRDM_TRACE_STATES_FLAG | >> - ((state & OMAP_POWERSTATE_MASK) << 8) | >> - ((prev & OMAP_POWERSTATE_MASK) << 0)); >> + (next << 8) | (prev << 0)); >> trace_power_domain_target(pwrdm->name, trace_state, >> smp_processor_id()); >> } >> @@ -723,6 +723,10 @@ int pwrdm_set_fpwrst(struct powerdomain *pwrdm, enum pwrdm_func_state fpwrst) >> } >> } >> >> + /* Trace the pwrdm desired target state */ >> + trace_power_domain_target(pwrdm->name, next_fpwrst, >> + smp_processor_id()); > > Use of smp_processor_id() here will require the same care as pointed out > by Roger Quadros in [PATCH] perf: Use raw_smp_processor_id insted of > smp_processor_id. > > Kevin > >> if (logic != pwrdm_read_logic_retst(pwrdm)) >> pwrdm_set_logic_retst(pwrdm, logic); >> >> @@ -776,6 +780,10 @@ int pwrdm_set_next_fpwrst(struct powerdomain *pwrdm, >> >> spin_lock_irqsave(&pwrdm->lock, flags); >> >> + /* Trace the pwrdm desired target state */ >> + trace_power_domain_target(pwrdm->name, fpwrst, >> + smp_processor_id()); >> + >> ret = pwrdm_set_logic_retst(pwrdm, logic); >> if (ret) >> pr_err("%s: unable to set logic state %0x of powerdomain: %s\n", >> @@ -821,13 +829,8 @@ int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst) >> pr_debug("powerdomain: setting next powerstate for %s to %0x\n", >> pwrdm->name, pwrst); >> >> - if (arch_pwrdm && arch_pwrdm->pwrdm_set_next_pwrst) { >> - /* Trace the pwrdm desired target state */ >> - trace_power_domain_target(pwrdm->name, pwrst, >> - smp_processor_id()); >> - /* Program the pwrdm desired target state */ >> + if (arch_pwrdm && arch_pwrdm->pwrdm_set_next_pwrst) >> ret = arch_pwrdm->pwrdm_set_next_pwrst(pwrdm, pwrst); >> - } >> >> return ret; >> } -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Sep 13, 2012 at 1:47 AM, Kevin Hilman <khilman@deeprootsystems.com> wrote: > Use of smp_processor_id() here will require the same care as pointed out > by Roger Quadros in [PATCH] perf: Use raw_smp_processor_id insted of > smp_processor_id. BTW it looks like get_cpu and put_cpu is the way to go, as pointed out by Russell. Jean -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 267241f..2277ad3 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -144,7 +144,7 @@ static void _update_logic_membank_counters(struct powerdomain *pwrdm) static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag) { - int prev, state, trace_state = 0; + int prev, next, state, trace_state; if (pwrdm == NULL) return -EINVAL; @@ -165,10 +165,10 @@ static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag) * If the power domain did not hit the desired state, * generate a trace event with both the desired and hit states */ - if (state != prev) { + next = pwrdm_read_next_fpwrst(pwrdm); + if (next != prev) { trace_state = (PWRDM_TRACE_STATES_FLAG | - ((state & OMAP_POWERSTATE_MASK) << 8) | - ((prev & OMAP_POWERSTATE_MASK) << 0)); + (next << 8) | (prev << 0)); trace_power_domain_target(pwrdm->name, trace_state, smp_processor_id()); } @@ -723,6 +723,10 @@ int pwrdm_set_fpwrst(struct powerdomain *pwrdm, enum pwrdm_func_state fpwrst) } } + /* Trace the pwrdm desired target state */ + trace_power_domain_target(pwrdm->name, next_fpwrst, + smp_processor_id()); + if (logic != pwrdm_read_logic_retst(pwrdm)) pwrdm_set_logic_retst(pwrdm, logic); @@ -776,6 +780,10 @@ int pwrdm_set_next_fpwrst(struct powerdomain *pwrdm, spin_lock_irqsave(&pwrdm->lock, flags); + /* Trace the pwrdm desired target state */ + trace_power_domain_target(pwrdm->name, fpwrst, + smp_processor_id()); + ret = pwrdm_set_logic_retst(pwrdm, logic); if (ret) pr_err("%s: unable to set logic state %0x of powerdomain: %s\n", @@ -821,13 +829,8 @@ int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst) pr_debug("powerdomain: setting next powerstate for %s to %0x\n", pwrdm->name, pwrst); - if (arch_pwrdm && arch_pwrdm->pwrdm_set_next_pwrst) { - /* Trace the pwrdm desired target state */ - trace_power_domain_target(pwrdm->name, pwrst, - smp_processor_id()); - /* Program the pwrdm desired target state */ + if (arch_pwrdm && arch_pwrdm->pwrdm_set_next_pwrst) ret = arch_pwrdm->pwrdm_set_next_pwrst(pwrdm, pwrst); - } return ret; }
Trace the power domain transitions using the functional power states, which include the power and logic states. While at it, fix the trace in the case a power domain did not hit the desired state, as reported by Paul Walmsley. Reported-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Jean Pihet <j-pihet@ti.com> --- arch/arm/mach-omap2/powerdomain.c | 23 +++++++++++++---------- 1 files changed, 13 insertions(+), 10 deletions(-)