[01/10] ARM: OMAP3+: Implement timer workaround for errata i103 and i767

On 09/06/2012 09:42 AM, Jon Hunter wrote:
> 
> On 09/06/2012 09:06 AM, Jon Hunter wrote:
>>
>> On 09/06/2012 12:07 AM, Vaibhav Hiremath wrote:
>>>
>>>
>>> On 9/6/2012 12:34 AM, Jon Hunter wrote:
>>>> Errata Titles:
>>>> i103: Delay needed to read some GP timer, WD timer and sync timer registers
>>>>       after wakeup (OMAP3/4)
>>>> i767: Delay needed to read some GP timer registers after wakeup (OMAP5)
>>>>
>>>> Description (i103/i767):
>>>> If a General Purpose Timer (GPTimer) is in posted mode (TSICR [2].POSTED=1),
>>>> due to internal resynchronizations, values read in TCRR, TCAR1 and TCAR2
>>>> registers right after the timer interface clock (L4) goes from stopped to
>>>> active may not return the expected values. The most common event leading to
>>>> this situation occurs upon wake up from idle.
>>>>
>>>> GPTimer non-posted synchronization mode is not impacted by this limitation.
>>>>
>>>> Workarounds:
>>>> 1). Disable posted mode
>>>> 2). Use static dependency between timer clock domain and MPUSS clock domain
>>>> 3). Use no-idle mode when the timer is active
>>>>
>>>> Workarounds #2 and #3 are not pratical from a power standpoint and so
>>>> workaround #1 has been implemented. Disabling posted mode adds some CPU overhead
>>>> for configuring the timers as the CPU has to wait for the write to complete.
>>>> However, disabling posted mode guarantees correct operation.
>>>>
>>>> Please note that it is safe to use posted mode for timers if the counter (TCRR)
>>>> and capture (TCARx) registers will never be read. An example of this is the
>>>> clock-event system timer. This is used by the kernel to schedule events however,
>>>> the timers counter is never read and capture registers are not used. Given that
>>>> the kernel configures this timer often yet never reads the counter register it
>>>> is safe to enable posted mode in this case. Hence, for the timer used for kernel
>>>> clock-events, posted mode is enabled by overriding the errata for devices that
>>>> are impacted by this defect.
>>>>
>>>> Although both dmtimers and watchdogs are impacted by this defect this patch only
>>>> implements the workaround for the dmtimer. Currently the watchdog driver does
>>>> not read the counter register and so no workaround is necessary.
>>>>
>>>> Confirmed with Vaibhav Hiremath that this bug also impacts AM33xx devices.
>>>>
>>>
>>> Thanks for pinging me on this and getting it confirmed.
>>>
>>>> Signed-off-by: Jon Hunter <jon-hunter@ti.com>
>>>> ---
>>>>  arch/arm/mach-omap2/timer.c               |    9 +++++++
>>>>  arch/arm/plat-omap/dmtimer.c              |    2 ++
>>>>  arch/arm/plat-omap/include/plat/dmtimer.h |   39 +++++++++++++++++++++++++++++
>>>>  3 files changed, 50 insertions(+)
>>>>
>>>> diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
>>>> index 2ff6d41..5471706 100644
>>>> --- a/arch/arm/mach-omap2/timer.c
>>>> +++ b/arch/arm/mach-omap2/timer.c
>>>> @@ -208,6 +208,13 @@ static void __init omap2_gp_clockevent_init(int gptimer_id,
>>>>  {
>>>>  	int res;
>>>>  
>>>> +	/*
>>>> +	 * For clock-event timers we never read the timer counter and
>>>> +	 * so we are not impacted by errata i103 and i767. Therefore,
>>>> +	 * we can safely ignore this errata for clock-event timers.
>>>> +	 */
>>>> +	__omap_dm_timer_populate_errata(&clkev, OMAP_TIMER_ERRATA_I103_I767);
>>>> +
>>>
>>> Couple of points,
>>>
>>> 1. It is confusing to me, as you are passing the errata flag so i expect
>>> api should set it. Why can't we do reverse way, you pass 0 here, since
>>> you don't want to set and pass this flag every other places where you
>>> want to enable this errata.
>>
>> Per the design of the __omap_dm_timer_populate_errata function, the 2nd
>> argument is called override to allow us to override an errata. I am not
>> a huge fan of this, but I wanted to be explicit in the code that we are
>> intentionally allowing posted mode for the clock-events timer.
>>
>> I did not wish to pass the flags we want to set because if there more
>> flags added in the future then we will have to keep changing the calls
>> to the populate_errata function to add these.
> 
> By the way, your proposal could work nicely if we could pass errata
> flags from HWMOD. However, I am not sure if Paul or Benoit would go for
> this as they want HWMOD data to be auto-generated as much as possible
> and so I am not sure how that would work for errata which are not
> expected by design ;-)

Another alternative would be to drop the override argument altogether
and just do something like the following for the clock-events timer ...

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[01/10] ARM: OMAP3+: Implement timer workaround for errata i103 and i767

Commit Message

Comments

Patch