| Message ID | 1348152453-30532-3-git-send-email-j-pihet@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi, * Jean Pihet <jean.pihet@newoldbits.com> [120920 07:48]: > --- a/drivers/power/avs/smartreflex.c > +++ b/drivers/power/avs/smartreflex.c > @@ -131,14 +131,11 @@ static void sr_set_clk_length(struct omap_sr *sr) > struct clk *sys_ck; > u32 sys_clk_speed; > > - if (cpu_is_omap34xx()) > - sys_ck = clk_get(NULL, "sys_ck"); > - else > - sys_ck = clk_get(NULL, "sys_clkin_ck"); > + sys_ck = clk_get(NULL, sr->fck_name); > > if (IS_ERR(sys_ck)) { > - dev_err(&sr->pdev->dev, "%s: unable to get sys clk\n", > - __func__); > + dev_err(&sr->pdev->dev, "%s: unable to get smartreflex fck %s\n", > + __func__, sr->fck_name); > return; > } > You should be able to make this even simpler and not have to pass the clock name around at all. Just do: syc_ck = clk_get(NULL, "fck); ... In the driver, and add the necessary entries to the clock alias table. That way it's up to the SoC to set up the necessary clocks and the driver stays generic. > @@ -1049,6 +1039,7 @@ static int __devexit omap_sr_remove(struct platform_device *pdev) > > list_del(&sr_info->node); > iounmap(sr_info->base); > + kfree(sr_info->fck_name); > kfree(sr_info->name); > kfree(sr_info); > mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); Then there's no need for the kfree of the fck_name either. There's an example of a similar patch done for twl-core.c as commit defa6be1 (mfd: Fix compile for twl-core.c by removing cpu_is_omap usage) in current linux next, except with smartreflex you probably don't need to do any of the platform_device_alloc trickery like twl-core.c neded to get around using the i2c numbers as names. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Tony, On Fri, Sep 21, 2012 at 12:15 AM, Tony Lindgren <tony@atomide.com> wrote: > Hi, > > * Jean Pihet <jean.pihet@newoldbits.com> [120920 07:48]: >> --- a/drivers/power/avs/smartreflex.c >> +++ b/drivers/power/avs/smartreflex.c >> @@ -131,14 +131,11 @@ static void sr_set_clk_length(struct omap_sr *sr) >> struct clk *sys_ck; >> u32 sys_clk_speed; >> >> - if (cpu_is_omap34xx()) >> - sys_ck = clk_get(NULL, "sys_ck"); >> - else >> - sys_ck = clk_get(NULL, "sys_clkin_ck"); >> + sys_ck = clk_get(NULL, sr->fck_name); >> >> if (IS_ERR(sys_ck)) { >> - dev_err(&sr->pdev->dev, "%s: unable to get sys clk\n", >> - __func__); >> + dev_err(&sr->pdev->dev, "%s: unable to get smartreflex fck %s\n", >> + __func__, sr->fck_name); >> return; >> } >> > > You should be able to make this even simpler and not have to pass > the clock name around at all. Just do: > > syc_ck = clk_get(NULL, "fck); > ... The problem is that the system has multiple instances of the smartreflex module, each having its own fck. On OMAP3/4 the fck's are derived from sys_clk via muxes and latches. The proposed code uses the fck's as defined in the .main_clk field of the hwmod entries, so that it takes the muxes and latches into account and also has a consistent clock naming. > In the driver, and add the necessary entries to the clock alias > table. That way it's up to the SoC to set up the necessary clocks > and the driver stays generic. Got it. The only solution would be to use an unique fck for all smartreflex modules in all configurations. Is that acceptable? > >> @@ -1049,6 +1039,7 @@ static int __devexit omap_sr_remove(struct platform_device *pdev) >> >> list_del(&sr_info->node); >> iounmap(sr_info->base); >> + kfree(sr_info->fck_name); >> kfree(sr_info->name); >> kfree(sr_info); >> mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > Then there's no need for the kfree of the fck_name > either. > > There's an example of a similar patch done for twl-core.c as commit > defa6be1 (mfd: Fix compile for twl-core.c by removing cpu_is_omap usage) > in current linux next, except with smartreflex you probably don't > need to do any of the platform_device_alloc trickery like twl-core.c > neded to get around using the i2c numbers as names. Thanks! Regards, Jean > > Regards, > > Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
* Jean Pihet <jean.pihet@newoldbits.com> [120920 23:31]: > On Fri, Sep 21, 2012 at 12:15 AM, Tony Lindgren <tony@atomide.com> wrote: > > > > You should be able to make this even simpler and not have to pass > > the clock name around at all. Just do: > > > > syc_ck = clk_get(NULL, "fck); > > ... > The problem is that the system has multiple instances of the > smartreflex module, each having its own fck. On OMAP3/4 the fck's are > derived from sys_clk via muxes and latches. > The proposed code uses the fck's as defined in the .main_clk field of > the hwmod entries, so that it takes the muxes and latches into account > and also has a consistent clock naming. If the same system has multiple clocks, then you could have them matched by the smartreflex driver instance number. Or if you mean different source clocks for various omaps, then you just need to set multiple aliases for those clocks. > > In the driver, and add the necessary entries to the clock alias > > table. That way it's up to the SoC to set up the necessary clocks > > and the driver stays generic. > Got it. The only solution would be to use an unique fck for all > smartreflex modules in all configurations. Is that acceptable? Hmm maybe I don't follow you, but sounds like you just need to use the driver instance like we do for timers: $ grep omap_timer arch/arm/mach-omap2/clock*data*.c arch/arm/mach-omap2/clock44xx_data.c: CLK("omap_timer.1", "timer_sys_ck", &sys_clkin_ck, CK_443X), arch/arm/mach-omap2/clock44xx_data.c: CLK("omap_timer.2", "timer_sys_ck", &sys_clkin_ck, CK_443X), arch/arm/mach-omap2/clock44xx_data.c: CLK("omap_timer.3", "timer_sys_ck", &sys_clkin_ck, CK_443X), ... If you need multiple clocks for a driver instance, then they typically are just "fck" and "ick". Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Tony, On Fri, Sep 21, 2012 at 9:07 PM, Tony Lindgren <tony@atomide.com> wrote: > * Jean Pihet <jean.pihet@newoldbits.com> [120920 23:31]: >> On Fri, Sep 21, 2012 at 12:15 AM, Tony Lindgren <tony@atomide.com> wrote: >> > >> > You should be able to make this even simpler and not have to pass >> > the clock name around at all. Just do: >> > >> > syc_ck = clk_get(NULL, "fck); >> > ... >> The problem is that the system has multiple instances of the >> smartreflex module, each having its own fck. On OMAP3/4 the fck's are >> derived from sys_clk via muxes and latches. >> The proposed code uses the fck's as defined in the .main_clk field of >> the hwmod entries, so that it takes the muxes and latches into account >> and also has a consistent clock naming. > > If the same system has multiple clocks, then you could have them matched > by the smartreflex driver instance number. > > Or if you mean different source clocks for various omaps, then > you just need to set multiple aliases for those clocks. > >> > In the driver, and add the necessary entries to the clock alias >> > table. That way it's up to the SoC to set up the necessary clocks >> > and the driver stays generic. >> Got it. The only solution would be to use an unique fck for all >> smartreflex modules in all configurations. Is that acceptable? > > Hmm maybe I don't follow you, but sounds like you just need to > use the driver instance like we do for timers: > > $ grep omap_timer arch/arm/mach-omap2/clock*data*.c > arch/arm/mach-omap2/clock44xx_data.c: CLK("omap_timer.1", "timer_sys_ck", &sys_clkin_ck, CK_443X), > arch/arm/mach-omap2/clock44xx_data.c: CLK("omap_timer.2", "timer_sys_ck", &sys_clkin_ck, CK_443X), > arch/arm/mach-omap2/clock44xx_data.c: CLK("omap_timer.3", "timer_sys_ck", &sys_clkin_ck, CK_443X), > ... Ok. I have a new version that implements this, re-submitting in a bit. > > If you need multiple clocks for a driver instance, then they > typically are just "fck" and "ick". > > Regards, > > Tony Thanks, Jean -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index d033a65..12d95c8 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c @@ -118,10 +118,24 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user) } sr_data->name = oh->name; + sr_data->fck_name = oh->main_clk; sr_data->ip_type = oh->class->rev; sr_data->senn_mod = 0x1; sr_data->senp_mod = 0x1; + if (cpu_is_omap34xx() || cpu_is_omap44xx()) { + sr_data->err_weight = OMAP3430_SR_ERRWEIGHT; + sr_data->err_maxlimit = OMAP3430_SR_ERRMAXLIMIT; + sr_data->accum_data = OMAP3430_SR_ACCUMDATA; + if (!(strcmp(sr_data->name, "smartreflex_mpu_iva"))) { + sr_data->senn_avgweight = OMAP3430_SR1_SENNAVGWEIGHT; + sr_data->senp_avgweight = OMAP3430_SR1_SENPAVGWEIGHT; + } else { + sr_data->senn_avgweight = OMAP3430_SR2_SENNAVGWEIGHT; + sr_data->senp_avgweight = OMAP3430_SR2_SENPAVGWEIGHT; + } + } + sr_data->voltdm = voltdm_lookup(sr_dev_attr->sensor_voltdm_name); if (IS_ERR(sr_data->voltdm)) { pr_err("%s: Unable to get voltage domain pointer for VDD %s\n", diff --git a/drivers/power/avs/smartreflex.c b/drivers/power/avs/smartreflex.c index 92f6728..f09e8df 100644 --- a/drivers/power/avs/smartreflex.c +++ b/drivers/power/avs/smartreflex.c @@ -131,14 +131,11 @@ static void sr_set_clk_length(struct omap_sr *sr) struct clk *sys_ck; u32 sys_clk_speed; - if (cpu_is_omap34xx()) - sys_ck = clk_get(NULL, "sys_ck"); - else - sys_ck = clk_get(NULL, "sys_clkin_ck"); + sys_ck = clk_get(NULL, sr->fck_name); if (IS_ERR(sys_ck)) { - dev_err(&sr->pdev->dev, "%s: unable to get sys clk\n", - __func__); + dev_err(&sr->pdev->dev, "%s: unable to get smartreflex fck %s\n", + __func__, sr->fck_name); return; } @@ -168,28 +165,6 @@ static void sr_set_clk_length(struct omap_sr *sr) } } -static void sr_set_regfields(struct omap_sr *sr) -{ - /* - * For time being these values are defined in smartreflex.h - * and populated during init. May be they can be moved to board - * file or pmic specific data structure. In that case these structure - * fields will have to be populated using the pdata or pmic structure. - */ - if (cpu_is_omap34xx() || cpu_is_omap44xx()) { - sr->err_weight = OMAP3430_SR_ERRWEIGHT; - sr->err_maxlimit = OMAP3430_SR_ERRMAXLIMIT; - sr->accum_data = OMAP3430_SR_ACCUMDATA; - if (!(strcmp(sr->name, "smartreflex_mpu_iva"))) { - sr->senn_avgweight = OMAP3430_SR1_SENNAVGWEIGHT; - sr->senp_avgweight = OMAP3430_SR1_SENPAVGWEIGHT; - } else { - sr->senn_avgweight = OMAP3430_SR2_SENNAVGWEIGHT; - sr->senp_avgweight = OMAP3430_SR2_SENPAVGWEIGHT; - } - } -} - static void sr_start_vddautocomp(struct omap_sr *sr) { if (!sr_class || !(sr_class->enable) || !(sr_class->configure)) { @@ -915,6 +890,14 @@ static int __init omap_sr_probe(struct platform_device *pdev) goto err_release_region; } + sr_info->fck_name = kasprintf(GFP_KERNEL, "%s", pdata->fck_name); + if (!sr_info->fck_name) { + dev_err(&pdev->dev, "%s: Unable to alloc SR instance fck name\n", + __func__); + ret = -ENOMEM; + goto err_free_name; + } + sr_info->pdev = pdev; sr_info->srid = pdev->id; sr_info->voltdm = pdata->voltdm; @@ -922,20 +905,25 @@ static int __init omap_sr_probe(struct platform_device *pdev) sr_info->nvalue_count = pdata->nvalue_count; sr_info->senn_mod = pdata->senn_mod; sr_info->senp_mod = pdata->senp_mod; + sr_info->err_weight = pdata->err_weight; + sr_info->err_maxlimit = pdata->err_maxlimit; + sr_info->accum_data = pdata->accum_data; + sr_info->senn_avgweight = pdata->senn_avgweight; + sr_info->senp_avgweight = pdata->senp_avgweight; sr_info->autocomp_active = false; sr_info->ip_type = pdata->ip_type; + sr_info->base = ioremap(mem->start, resource_size(mem)); if (!sr_info->base) { dev_err(&pdev->dev, "%s: ioremap fail\n", __func__); ret = -ENOMEM; - goto err_free_name; + goto err_free_fck_name; } if (irq) sr_info->irq = irq->start; sr_set_clk_length(sr_info); - sr_set_regfields(sr_info); list_add(&sr_info->node, &sr_list); @@ -1014,6 +1002,8 @@ err_debugfs: err_iounmap: list_del(&sr_info->node); iounmap(sr_info->base); +err_free_fck_name: + kfree(sr_info->fck_name); err_free_name: kfree(sr_info->name); err_release_region: @@ -1049,6 +1039,7 @@ static int __devexit omap_sr_remove(struct platform_device *pdev) list_del(&sr_info->node); iounmap(sr_info->base); + kfree(sr_info->fck_name); kfree(sr_info->name); kfree(sr_info); mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h index 3101e62..7b16c3c 100644 --- a/include/linux/power/smartreflex.h +++ b/include/linux/power/smartreflex.h @@ -145,6 +145,7 @@ struct omap_sr { char *name; + char *fck_name; struct list_head node; struct platform_device *pdev; struct omap_sr_nvalue_table *nvalue_table; @@ -259,9 +260,15 @@ struct omap_sr_nvalue_table { * struct omap_sr_data - Smartreflex platform data. * * @name: instance name + * @fck_name: IP block fck name * @ip_type: Smartreflex IP type. - * @senp_mod: SENPENABLE value for the sr - * @senn_mod: SENNENABLE value for sr + * @senp_mod: SENPENABLE value of the sr CONFIG register + * @senn_mod: SENNENABLE value for sr CONFIG register + * @err_weight ERRWEIGHT value of the sr ERRCONFIG register + * @err_maxlimit ERRMAXLIMIT value of the sr ERRCONFIG register + * @accum_data ACCUMDATA value of the sr CONFIG register + * @senn_avgweight SENNAVGWEIGHT value of the sr AVGWEIGHT register + * @senp_avgweight SENPAVGWEIGHT value of the sr AVGWEIGHT register * @nvalue_count: Number of distinct nvalues in the nvalue table * @enable_on_init: whether this sr module needs to enabled at * boot up or not. @@ -271,9 +278,15 @@ struct omap_sr_nvalue_table { */ struct omap_sr_data { const char *name; + const char *fck_name; int ip_type; u32 senp_mod; u32 senn_mod; + u32 err_weight; + u32 err_maxlimit; + u32 accum_data; + u32 senn_avgweight; + u32 senp_avgweight; int nvalue_count; bool enable_on_init; struct omap_sr_nvalue_table *nvalue_table;
Remove the device dependent settings (cpu_is_xxx(), IP fck etc.) from the driver code and pass them instead via the platform data. This allows a clean separation of the driver code and the platform code. Signed-off-by: Jean Pihet <j-pihet@ti.com> --- arch/arm/mach-omap2/sr_device.c | 14 ++++++++++ drivers/power/avs/smartreflex.c | 51 +++++++++++++++--------------------- include/linux/power/smartreflex.h | 17 +++++++++++- 3 files changed, 50 insertions(+), 32 deletions(-)