| Message ID | 1346422739-11362-1-git-send-email-prakash.pm@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 08/31/2012 02:18 PM, Manjunathappa, Prakash wrote: > It is expected that LCDC to continue to be disabled after > resume if it is blanked before suspend. This is also true > for DVFS. But it is observed that LCDC being enabled after > suspend/resume cycle or DVFS. > > Correcting it by having check for FB_BLANK_UNBLANK before > enabling. > > Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Applied. Thanks, Florian Tobias Schandinat > --- > Applies on top of fbdev-next of Florian Tobias Schandinat's tree. > Since v1: > Re-written commit message. > > drivers/video/da8xx-fb.c | 11 +++++++---- > 1 files changed, 7 insertions(+), 4 deletions(-) > > diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c > index 761c8d1..1273354 100644 > --- a/drivers/video/da8xx-fb.c > +++ b/drivers/video/da8xx-fb.c > @@ -962,7 +962,8 @@ static int lcd_da8xx_cpufreq_transition(struct notifier_block *nb, > par->lcd_fck_rate = clk_get_rate(par->lcdc_clk); > lcd_disable_raster(); > lcd_calc_clk_divider(par); > - lcd_enable_raster(); > + if (par->blank == FB_BLANK_UNBLANK) > + lcd_enable_raster(); > } > } > > @@ -1486,10 +1487,12 @@ static int fb_resume(struct platform_device *dev) > > console_lock(); > clk_enable(par->lcdc_clk); > - lcd_enable_raster(); > + if (par->blank == FB_BLANK_UNBLANK) { > + lcd_enable_raster(); > > - if (par->panel_power_ctrl) > - par->panel_power_ctrl(1); > + if (par->panel_power_ctrl) > + par->panel_power_ctrl(1); > + } > > fb_set_suspend(info, 0); > console_unlock(); -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c index 761c8d1..1273354 100644 --- a/drivers/video/da8xx-fb.c +++ b/drivers/video/da8xx-fb.c @@ -962,7 +962,8 @@ static int lcd_da8xx_cpufreq_transition(struct notifier_block *nb, par->lcd_fck_rate = clk_get_rate(par->lcdc_clk); lcd_disable_raster(); lcd_calc_clk_divider(par); - lcd_enable_raster(); + if (par->blank == FB_BLANK_UNBLANK) + lcd_enable_raster(); } } @@ -1486,10 +1487,12 @@ static int fb_resume(struct platform_device *dev) console_lock(); clk_enable(par->lcdc_clk); - lcd_enable_raster(); + if (par->blank == FB_BLANK_UNBLANK) { + lcd_enable_raster(); - if (par->panel_power_ctrl) - par->panel_power_ctrl(1); + if (par->panel_power_ctrl) + par->panel_power_ctrl(1); + } fb_set_suspend(info, 0); console_unlock();
It is expected that LCDC to continue to be disabled after resume if it is blanked before suspend. This is also true for DVFS. But it is observed that LCDC being enabled after suspend/resume cycle or DVFS. Correcting it by having check for FB_BLANK_UNBLANK before enabling. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> --- Applies on top of fbdev-next of Florian Tobias Schandinat's tree. Since v1: Re-written commit message. drivers/video/da8xx-fb.c | 11 +++++++---- 1 files changed, 7 insertions(+), 4 deletions(-)