| Message ID | 1348836795-4783-7-git-send-email-kishon@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, Sep 28, 2012 at 06:23:15PM +0530, Kishon Vijay Abraham I wrote: > Added dwc3 support for dwc3 core and update the documentation with > device tree binding information. > > Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> > --- > Documentation/devicetree/bindings/usb/dwc3.txt | 24 ++++++++++++++++++++++++ > drivers/usb/dwc3/core.c | 14 ++++++++++++-- > 2 files changed, 36 insertions(+), 2 deletions(-) > create mode 100644 Documentation/devicetree/bindings/usb/dwc3.txt > > diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt > new file mode 100644 > index 0000000..87d5eeb > --- /dev/null > +++ b/Documentation/devicetree/bindings/usb/dwc3.txt > @@ -0,0 +1,24 @@ > +SYNOPSIS DWC3 CORE > + > +DWC3- USB3 CONTROLLER > + > +Required properties: > + - compatible: Should be "synopsis,dwc3" "synopsys" and I think: - compatible: Must be "synopsys,dwc3" reads a bit better. > + - reg : Address and length of the register set for the device > + - interrupts: Interrupts used by the dwc3 controller. > + - interrupt-parent: the phandle for the interrupt controller that > + services interrupts for this device. > + > +Optional properties: > + - tx-fifo-resize: determines if the fifo spaces can be reallocated according > + to use-cases. actually, this should read: "determines if the FIFO *has* to be reallocated. On OMAP5 ES1 the default value is not good enough and we _must_ reallocate FIFO sizes. > +This is usually a subnode to DWC3 glue to which it is connected. > + > +dwc3@4a030000 { > + compatible = "synopsis,dwc3"; "synopsys" > + reg = <0x4a030000 0xcfff>; > + interrupts = <0 92 4> > + interrupt-parent = <&gic> > + tx-fifo-resize; > +}; > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c > index 08a5738..0c17a7a 100644 > --- a/drivers/usb/dwc3/core.c > +++ b/drivers/usb/dwc3/core.c > @@ -484,8 +484,7 @@ static int __devinit dwc3_probe(struct platform_device *pdev) > else > dwc->maximum_speed = DWC3_DCFG_SUPERSPEED; > > - if (of_get_property(node, "tx-fifo-resize", NULL)) > - dwc->needs_fifo_resize = true; > + dwc->needs_fifo_resize = of_property_read_bool(node, "tx-fifo-resize"); > > pm_runtime_enable(dev); > pm_runtime_get_sync(dev); > @@ -602,11 +601,22 @@ static int __devexit dwc3_remove(struct platform_device *pdev) > return 0; > } > > +#ifdef CONFIG_OF > +static const struct of_device_id of_dwc3_matach[] = { > + { > + .compatible = "synopsis,dwc3" "synopsys" > + }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, of_dwc3_matach); > +#endif > + > static struct platform_driver dwc3_driver = { > .probe = dwc3_probe, > .remove = __devexit_p(dwc3_remove), > .driver = { > .name = "dwc3", > + .of_match_table = of_match_ptr(of_dwc3_matach), > }, > }; > > -- > 1.7.10.4 >
Hi, On Fri, Sep 28, 2012 at 6:32 PM, Felipe Balbi <balbi@ti.com> wrote: > On Fri, Sep 28, 2012 at 06:23:15PM +0530, Kishon Vijay Abraham I wrote: >> Added dwc3 support for dwc3 core and update the documentation with >> device tree binding information. >> >> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> >> --- >> Documentation/devicetree/bindings/usb/dwc3.txt | 24 ++++++++++++++++++++++++ >> drivers/usb/dwc3/core.c | 14 ++++++++++++-- >> 2 files changed, 36 insertions(+), 2 deletions(-) >> create mode 100644 Documentation/devicetree/bindings/usb/dwc3.txt >> >> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt >> new file mode 100644 >> index 0000000..87d5eeb >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt >> @@ -0,0 +1,24 @@ >> +SYNOPSIS DWC3 CORE >> + >> +DWC3- USB3 CONTROLLER >> + >> +Required properties: >> + - compatible: Should be "synopsis,dwc3" > > "synopsys" and I think: > > - compatible: Must be "synopsys,dwc3" reads a bit better. Will re-post this patch. Thanks Kishon -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello. On 28-09-2012 14:53, Kishon Vijay Abraham I wrote: > Added dwc3 support for dwc3 core and update the documentation with > device tree binding information. > > Signed-off-by: Kishon Vijay Abraham I<kishon@ti.com> [...] > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c > index 08a5738..0c17a7a 100644 > --- a/drivers/usb/dwc3/core.c > +++ b/drivers/usb/dwc3/core.c [...] > @@ -602,11 +601,22 @@ static int __devexit dwc3_remove(struct platform_device *pdev) > return 0; > } > > +#ifdef CONFIG_OF > +static const struct of_device_id of_dwc3_matach[] = { I guess you meant 'of_dwc3_match' here and below? > + { > + .compatible = "synopsis,dwc3" > + }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, of_dwc3_matach); > +#endif > + > static struct platform_driver dwc3_driver = { > .probe = dwc3_probe, > .remove = __devexit_p(dwc3_remove), > .driver = { > .name = "dwc3", > + .of_match_table = of_match_ptr(of_dwc3_matach), > }, > }; > WBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On Sun, Sep 30, 2012 at 10:17 PM, Sergei Shtylyov <sshtylyov@mvista.com> wrote: > Hello. > > > On 28-09-2012 14:53, Kishon Vijay Abraham I wrote: > >> Added dwc3 support for dwc3 core and update the documentation with >> device tree binding information. >> >> Signed-off-by: Kishon Vijay Abraham I<kishon@ti.com> > > [...] > > >> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c >> index 08a5738..0c17a7a 100644 >> --- a/drivers/usb/dwc3/core.c >> +++ b/drivers/usb/dwc3/core.c > > [...] > >> @@ -602,11 +601,22 @@ static int __devexit dwc3_remove(struct >> platform_device *pdev) >> return 0; >> } >> >> +#ifdef CONFIG_OF >> +static const struct of_device_id of_dwc3_matach[] = { > > > I guess you meant 'of_dwc3_match' here and below? indeed.. will re-post the patch.. Thanks Kishon -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt new file mode 100644 index 0000000..87d5eeb --- /dev/null +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -0,0 +1,24 @@ +SYNOPSIS DWC3 CORE + +DWC3- USB3 CONTROLLER + +Required properties: + - compatible: Should be "synopsis,dwc3" + - reg : Address and length of the register set for the device + - interrupts: Interrupts used by the dwc3 controller. + - interrupt-parent: the phandle for the interrupt controller that + services interrupts for this device. + +Optional properties: + - tx-fifo-resize: determines if the fifo spaces can be reallocated according + to use-cases. + +This is usually a subnode to DWC3 glue to which it is connected. + +dwc3@4a030000 { + compatible = "synopsis,dwc3"; + reg = <0x4a030000 0xcfff>; + interrupts = <0 92 4> + interrupt-parent = <&gic> + tx-fifo-resize; +}; diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 08a5738..0c17a7a 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -484,8 +484,7 @@ static int __devinit dwc3_probe(struct platform_device *pdev) else dwc->maximum_speed = DWC3_DCFG_SUPERSPEED; - if (of_get_property(node, "tx-fifo-resize", NULL)) - dwc->needs_fifo_resize = true; + dwc->needs_fifo_resize = of_property_read_bool(node, "tx-fifo-resize"); pm_runtime_enable(dev); pm_runtime_get_sync(dev); @@ -602,11 +601,22 @@ static int __devexit dwc3_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_OF +static const struct of_device_id of_dwc3_matach[] = { + { + .compatible = "synopsis,dwc3" + }, + { }, +}; +MODULE_DEVICE_TABLE(of, of_dwc3_matach); +#endif + static struct platform_driver dwc3_driver = { .probe = dwc3_probe, .remove = __devexit_p(dwc3_remove), .driver = { .name = "dwc3", + .of_match_table = of_match_ptr(of_dwc3_matach), }, };
Added dwc3 support for dwc3 core and update the documentation with device tree binding information. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> --- Documentation/devicetree/bindings/usb/dwc3.txt | 24 ++++++++++++++++++++++++ drivers/usb/dwc3/core.c | 14 ++++++++++++-- 2 files changed, 36 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/usb/dwc3.txt