diff mbox

[v3] Enable USB peripheral on dm365 EVM

Message ID 1349301859-31306-1-git-send-email-const@MakeLinux.com (mailing list archive)
State Changes Requested
Headers show

Commit Message

Constantine Shulyupin Oct. 3, 2012, 10:04 p.m. UTC 
From: Constantine Shulyupin <const@MakeLinux.com>

From: Miguel Aguilar <miguel.aguilar@ridgerun.com>
Signed-off-by: Constantine Shulyupin <const@MakeLinux.com>
---
Tested with usb gadget g_zero.
This patch is based on code from Arago, Angstom, and RidgeRun projects.
Original patch is three years ago:
http://www.mail-archive.com/davinci-linux-open-source@linux.davincidsp.com/msg14741.html

---
 arch/arm/mach-davinci/board-dm365-evm.c |    8 ++++++++
 arch/arm/mach-davinci/usb.c             |    2 ++
 drivers/usb/musb/davinci.h              |    1 +
 drivers/usb/musb/musb_core.c            |   20 ++++++++++++--------
 4 files changed, 23 insertions(+), 8 deletions(-)

Comments

Greg Kroah-Hartman Oct. 3, 2012, 11:23 p.m. UTC | #1 
On Thu, Oct 04, 2012 at 12:04:19AM +0200, const@MakeLinux.com wrote:
> From: Constantine Shulyupin <const@MakeLinux.com>
> 
> From: Miguel Aguilar <miguel.aguilar@ridgerun.com>
> Signed-off-by: Constantine Shulyupin <const@MakeLinux.com>
> ---
> Tested with usb gadget g_zero.
> This patch is based on code from Arago, Angstom, and RidgeRun projects.
> Original patch is three years ago:
> http://www.mail-archive.com/davinci-linux-open-source@linux.davincidsp.com/msg14741.html

You can't have two "From:" lines.

And put the information above, in the changelog entry.

Also, it looks like you are modifying printk lines for no reason, why do
that in this patch?  That shouldn't be needed, right?

greg k-h
diff mbox

Patch

diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 3a4743b..dfcb67f 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -38,6 +38,8 @@ 
 #include <mach/mmc.h>
 #include <mach/nand.h>
 #include <mach/keyscan.h>
+#include <mach/usb.h>
+#include <mach/hardware.h>
 
 #include <media/tvp514x.h>
 
@@ -92,6 +94,9 @@  static inline int have_tvp7002(void)
 #define CPLD_CCD_DIR3	CPLD_OFFSET(0x3f,0)
 #define CPLD_CCD_IO3	CPLD_OFFSET(0x3f,1)
 
+#define USBPHY_CTL_PADDR	0x01c40034
+#define USBPHY_CLKFREQ_24MHZ	BIT(13)
+
 static void __iomem *cpld;
 
 
@@ -613,6 +618,9 @@  static __init void dm365_evm_init(void)
 
 	dm365_init_spi0(BIT(0), dm365_evm_spi_info,
 			ARRAY_SIZE(dm365_evm_spi_info));
+	writel(readl(IO_ADDRESS(USBPHY_CTL_PADDR)) | USBPHY_CLKFREQ_24MHZ,
+			IO_ADDRESS(USBPHY_CTL_PADDR));
+	davinci_setup_usb(500, 8);
 }
 
 MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
index 23d2b6d..664c689 100644
--- a/arch/arm/mach-davinci/usb.c
+++ b/arch/arm/mach-davinci/usb.c
@@ -49,6 +49,8 @@  static struct musb_hdrc_platform_data usb_data = {
 	.mode           = MUSB_PERIPHERAL,
 #elif defined(CONFIG_USB_MUSB_HOST)
 	.mode           = MUSB_HOST,
+#else
+	.mode           = MUSB_OTG,
 #endif
 	.clock		= "usb",
 	.config		= &musb_config,
diff --git a/drivers/usb/musb/davinci.h b/drivers/usb/musb/davinci.h
index 371baa0..e737d97 100644
--- a/drivers/usb/musb/davinci.h
+++ b/drivers/usb/musb/davinci.h
@@ -16,6 +16,7 @@ 
 
 /* Integrated highspeed/otg PHY */
 #define USBPHY_CTL_PADDR	0x01c40034
+#define USBPHY_CLKFREQ_24MHZ	BIT(13)
 #define USBPHY_DATAPOL		BIT(11)	/* (dm355) switch D+/D- */
 #define USBPHY_PHYCLKGD		BIT(8)
 #define USBPHY_SESNDEN		BIT(7)	/* v(sess_end) comparator */
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 26f1bef..277fe65 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2051,9 +2051,17 @@  musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 	dev_info(dev, "USB %s mode controller at %p using %s, IRQ %d\n",
 			({char *s;
 			 switch (musb->board_mode) {
-			 case MUSB_HOST:		s = "Host"; break;
-			 case MUSB_PERIPHERAL:	s = "Peripheral"; break;
-			 default:		s = "OTG"; break;
+			 case MUSB_HOST:
+				s = "Host";
+			 break;
+			 case MUSB_PERIPHERAL:
+				s = "Peripheral";
+			 break;
+			 case MUSB_OTG:
+				s = "OTG";
+			 break;
+			 default:
+				s = "Undefined";
 			 }; s; }),
 			ctrl,
 			(is_dma_capable() && musb->dma_controller)
@@ -2402,11 +2410,7 @@  static int __init musb_init(void)
 	if (usb_disabled())
 		return 0;
 
-	pr_info("%s: version " MUSB_VERSION ", "
-		"?dma?"
-		", "
-		"otg (peripheral+host)",
-		musb_driver_name);
+	pr_info("%s: version %s\n", MUSB_VERSION, musb_driver_name);
 	return platform_driver_register(&musb_driver);
 }
 module_init(musb_init);