| Message ID | 1349274589-11389-3-git-send-email-avinashphilip@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
some minor nitpicks below > Platforms containing the ELM module can be used to correct errors > reported by BCH 4, 8 & 16 bit ECC scheme. For now only 4 & 8 bit > support is added. > > Signed-off-by: Philip, Avinash <avinashphilip@ti.com> > Cc: Grant Likely <grant.likely@secretlab.ca> > Cc: Rob Herring <rob.herring@calxeda.com> > Cc: Rob Landley <rob@landley.net> > --- > :000000 100644 0000000... b88ee83... A Documentation/devicetree/bindings/mtd/elm.txt > :100644 100644 395733a... 0f6a94b... M drivers/mtd/devices/Makefile > :000000 100644 0000000... 802b572... A drivers/mtd/devices/elm.c > :000000 100644 0000000... eb53163... A include/linux/platform_data/elm.h > Documentation/devicetree/bindings/mtd/elm.txt | 18 + > drivers/mtd/devices/Makefile | 4 +- > drivers/mtd/devices/elm.c | 440 +++++++++++++++++++++++++ > include/linux/platform_data/elm.h | 60 ++++ > 4 files changed, 521 insertions(+), 1 deletions(-) > > diff --git a/Documentation/devicetree/bindings/mtd/elm.txt b/Documentation/devicetree/bindings/mtd/elm.txt > new file mode 100644 > index 0000000..b88ee83 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mtd/elm.txt > @@ -0,0 +1,18 @@ > +Error location module > + > +Required properties: > +- compatible: Must be "ti,elm" > +- reg: physical base address and size of the registers map. > +- interrupts: Interrupt number for the elm. > +- interrupt-parent: The parent interrupt controller > + > +Optional properties: > +- ti,hwmods: Name of the hwmod associated to the elm > + > +Example: > +elm: elm@0 { > + compatible = "ti,elm"; > + reg = <0x48080000 0x2000>; > + interrupt-parent = <&intc>; > + interrupts = <4>; > +}; > diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile > index 395733a..0f6a94b 100644 > --- a/drivers/mtd/devices/Makefile > +++ b/drivers/mtd/devices/Makefile > @@ -17,8 +17,10 @@ obj-$(CONFIG_MTD_LART) += lart.o > obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o > obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o > obj-$(CONFIG_MTD_M25P80) += m25p80.o > +obj-$(CONFIG_MTD_NAND_OMAP2) += elm.o > obj-$(CONFIG_MTD_SPEAR_SMI) += spear_smi.o > obj-$(CONFIG_MTD_SST25L) += sst25l.o > obj-$(CONFIG_MTD_BCM47XXSFLASH) += bcm47xxsflash.o > > -CFLAGS_docg3.o += -I$(src) > \ No newline at end of file > + > +CFLAGS_docg3.o += -I$(src) > diff --git a/drivers/mtd/devices/elm.c b/drivers/mtd/devices/elm.c > new file mode 100644 > index 0000000..802b572 > --- /dev/null > +++ b/drivers/mtd/devices/elm.c > @@ -0,0 +1,440 @@ > +/* > + * Error Location Module > + * > + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + */ > + > +#include <linux/platform_device.h> > +#include <linux/module.h> > +#include <linux/interrupt.h> > +#include <linux/io.h> > +#include <linux/of.h> > +#include <linux/pm_runtime.h> > +#include <linux/platform_data/elm.h> > + > +#define ELM_IRQSTATUS 0x018 > +#define ELM_IRQENABLE 0x01c > +#define ELM_LOCATION_CONFIG 0x020 > +#define ELM_PAGE_CTRL 0x080 > +#define ELM_SYNDROME_FRAGMENT_0 0x400 > +#define ELM_SYNDROME_FRAGMENT_6 0x418 > +#define ELM_LOCATION_STATUS 0x800 > +#define ELM_ERROR_LOCATION_0 0x880 > + > +/* ELM Interrupt Status Register */ > +#define INTR_STATUS_PAGE_VALID BIT(8) > + > +/* ELM Interrupt Enable Register */ > +#define INTR_EN_PAGE_MASK BIT(8) > + > +/* ELM Location Configuration Register */ > +#define ECC_BCH_LEVEL_MASK 0x3 > + > +/* ELM syndrome */ > +#define ELM_SYNDROME_VALID BIT(16) > + > +/* ELM_LOCATION_STATUS Register */ > +#define ECC_CORRECTABLE_MASK BIT(8) > +#define ECC_NB_ERRORS_MASK 0x1f > + > +/* ELM_ERROR_LOCATION_0-15 Registers */ > +#define ECC_ERROR_LOCATION_MASK 0x1fff > + > +#define ELM_ECC_SIZE 0x7ff > + > +#define SYNDROME_FRAGMENT_REG_SIZE 0x40 > +#define ERROR_LOCATION_SIZE 0x100 > +#define MAX_BCH_ELM_ERROR 16 > +#define ELM_FRAGMENT_REG 7 > + > +typedef u32 syn_t[ELM_FRAGMENT_REG]; > +typedef u32 elm_error_t[MAX_BCH_ELM_ERROR]; > + > +struct elm_info { > + struct device *dev; > + void __iomem *elm_base; > + struct completion elm_completion; > + struct list_head list; > + enum bch_ecc bch_type; > +}; > + > +static LIST_HEAD(elm_devices); > + > +static void elm_write_reg(void *offset, u32 val) > +{ > + writel(val, offset); > +} > + > +static u32 elm_read_reg(void *offset) > +{ > + return readl(offset); > +} > + > +/** > + * elm_config - Configure ELM module > + * @info: elm info > + */ > +static void elm_config(struct elm_info *info) > +{ > + u32 reg_val; > + > + reg_val = (info->bch_type & ECC_BCH_LEVEL_MASK) | (ELM_ECC_SIZE << 16); > + elm_write_reg(info->elm_base + ELM_LOCATION_CONFIG, reg_val); > +} > + > +/** > + * elm_configure_page_mode - Enable/Disable page mode > + * @info: elm info > + * @index: index number of syndrome fragment vector > + * @enable: enable/disable flag for page mode > + * > + * Enable page mode for syndrome fragment index > + */ > +static void elm_configure_page_mode(struct elm_info *info, int index, > + bool enable) > +{ > + u32 reg_val; > + > + reg_val = elm_read_reg(info->elm_base + ELM_PAGE_CTRL); > + if (enable) > + reg_val |= BIT(index); /* enable page mode */ > + else > + reg_val &= ~BIT(index); /* disable page mode */ > + > + elm_write_reg(info->elm_base + ELM_PAGE_CTRL, reg_val); > +} > + > +static void rearrange_bch4(u8 *syndrome) > +{ > + /* > + * BCH4 has 52 bit used for ecc, but OOB stored with > + * nibble 0 appended, removes appended 0 nibble > + */ > + u64 *dst = (u64 *)syndrome; > + *dst >>= 4; > +} > + > +/** > + * elm_reverse_eccdata - Reverse ecc data > + * @info: elm info > + * @ecc_data: buffer for calculated ecc > + * @syndrome: buffer for syndrome polynomial > + * > + * ecc_data has to be reversed for syndrome vector > + */ > +static void elm_reverse_eccdata(struct elm_info *info, u8 *ecc_data, > + u8 *syndrome) > +{ > + int i; > + int bch_size = info->bch_type ? BCH8_ECC_OOB_BYTES : BCH4_SIZE; > + > + for (i = 0; i < bch_size; i++) > + syndrome[bch_size - 1 - i] = ecc_data[i]; > + > + /* > + * syndrome polynomial to be rearranged for BCH 4 ecc scheme as 52 > + * bits being used and 4 bits being appended in syndrome vector > + */ > + if (info->bch_type == BCH4_ECC) > + rearrange_bch4(syndrome); > +} > + > +/** > + * elm_load_syndrome - Load ELM syndrome reg > + * @info: elm info > + * @index: syndrome fragment index > + * @syndrome: Syndrome polynomial > + * > + * Load syndrome fragment registers with syndrome polynomial > + */ > +static void elm_load_syndrome(struct elm_info *info, int index, u8 *syndrome) > +{ > + int i; > + int max = info->bch_type ? BCH8_SYNDROME_SIZE : BCH4_SYNDROME_SIZE; > + void *syn_frag_base = info->elm_base + ELM_SYNDROME_FRAGMENT_0; > + syn_t *syn_fragment; > + u32 reg_val; > + > + elm_configure_page_mode(info, index, true); > + syn_fragment = syn_frag_base + SYNDROME_FRAGMENT_REG_SIZE * index; > + > + for (i = 0; i < max; i++) { > + reg_val = syndrome[0] | syndrome[1] << 8 | syndrome[2] << 16 | > + syndrome[3] << 24; > + elm_write_reg(*syn_fragment + i, reg_val); > + /* Update syndrome polynomial pointer */ > + syndrome += 4; > + } > +} > + > +/** > + * elm_start_processing - start elm syndrome processing > + * @info: elm info > + * @err_vec: elm error vectors > + * > + * Set syndrome valid bit for syndrome fragment registers for which > + * elm syndrome fragment registers are loaded. This enables elm module > + * to start processing syndrome vectors. > + */ > +static void elm_start_processing(struct elm_info *info, > + struct elm_errorvec *err_vec) > +{ > + int i; > + void *offset; > + u32 reg_val; > + > + /* > + * Set syndrome vector valid so that ELM module will process it for > + * vectors error is reported > + */ > + for (i = 0; i < ERROR_VECTOR_MAX; i++) { > + if (err_vec[i].error_reported) { > + offset = info->elm_base + ELM_SYNDROME_FRAGMENT_6 + i * > + SYNDROME_FRAGMENT_REG_SIZE; > + reg_val = elm_read_reg(offset); > + reg_val |= ELM_SYNDROME_VALID; > + elm_write_reg(offset, reg_val); > + } > + } > +} > + > +/** > + * elm_error_correction - locate correctable error position > + * @info: elm info > + * @err_vec: elm error vectors > + * > + * On completion of processing by elm module, error location status > + * register updated with correctable/uncorrectable error information. > + * In case of correctable errors, number of errors located from > + * elm location status register & read the these many positions from should probably be: "... & read the positions from ..."? > + * elm error location register. > + */ > +static void elm_error_correction(struct elm_info *info, > + struct elm_errorvec *err_vec) > +{ > + int i, j, errors = 0; > + void *err_loc_base = info->elm_base + ELM_ERROR_LOCATION_0; > + elm_error_t *err_loc; > + void *offset; > + u32 reg_val; > + > + for (i = 0; i < ERROR_VECTOR_MAX; i++) { > + /* check error reported */ > + if (err_vec[i].error_reported) { > + offset = info->elm_base + ELM_LOCATION_STATUS + > + i * ERROR_LOCATION_SIZE; > + reg_val = elm_read_reg(offset); > + /* check correctable error or not */ > + if (reg_val & ECC_CORRECTABLE_MASK) { > + err_loc = err_loc_base + > + i * ERROR_LOCATION_SIZE; > + /* read count of correctable errors */ > + err_vec[i].error_count = reg_val & > + ECC_NB_ERRORS_MASK; > + > + /* update the error locations in error vector */ > + for (j = 0; j < err_vec[i].error_count; j++) { > + > + reg_val = elm_read_reg(*err_loc + j); > + err_vec[i].error_loc[j] = reg_val & > + ECC_ERROR_LOCATION_MASK; > + } > + > + errors += err_vec[i].error_count; > + } else { > + err_vec[i].error_uncorrectable++; > + } extra braces above > + > + /* clearing interrupts for processed error vectors */ > + elm_write_reg(info->elm_base + ELM_IRQSTATUS, BIT(i)); > + > + /* disable page mode */ > + elm_configure_page_mode(info, i, false); > + } > + } > + > + return; > +} > + > +/** > + * elm_decode_bch_error_page - Locate error position > + * @info: elm info should be dev, not info > + * @ecc_calc: calculated ECC bytes from GPMC > + * @err_vec: elm error vectors > + * > + * Called with one or greater reported and is vectors with error reported > + * is updated in err_vec[].error_reported > + */ I do not understand the statement "Called with one ..." > +void elm_decode_bch_error_page(struct device *dev, u8 *ecc_calc, > + struct elm_errorvec *err_vec) > +{ > + int i; > + u8 syndrome[BCH_MAX_ECC_BYTES_PER_SECTOR] = {0}, *syn_p; > + struct elm_info *info = dev_get_drvdata(dev); > + u32 reg_val; > + > + /* enable page mode interrupt */ > + reg_val = elm_read_reg(info->elm_base + ELM_IRQSTATUS); > + elm_write_reg(info->elm_base + ELM_IRQSTATUS, > + reg_val & INTR_STATUS_PAGE_VALID); > + elm_write_reg(info->elm_base + ELM_IRQENABLE, INTR_EN_PAGE_MASK); > + > + syn_p = syndrome; > + for (i = 0; i < ERROR_VECTOR_MAX; i++) { > + if (err_vec[i].error_reported) { > + elm_reverse_eccdata(info, ecc_calc, syn_p); > + elm_load_syndrome(info, i, syn_p); > + } > + > + ecc_calc += info->bch_type ? BCH8_SIZE : BCH4_SIZE; > + syn_p += OOB_SECTOR_SIZE; > + } > + > + elm_start_processing(info, err_vec); > + > + /* > + * In case of error reported, wait for ELM module to finish > + * locating error correction > + */ > + wait_for_completion(&info->elm_completion); > + > + /* disable page mode interrupt */ > + reg_val = elm_read_reg(info->elm_base + ELM_IRQENABLE); > + elm_write_reg(info->elm_base + ELM_IRQENABLE, > + reg_val & ~INTR_EN_PAGE_MASK); > + elm_error_correction(info, err_vec); > +} > +EXPORT_SYMBOL(elm_decode_bch_error_page); > + > +static irqreturn_t elm_isr(int this_irq, void *dev_id) > +{ > + u32 reg_val; > + struct elm_info *info = dev_id; > + > + reg_val = elm_read_reg(info->elm_base + ELM_IRQSTATUS); > + > + /* all error vectors processed */ > + if (reg_val & INTR_STATUS_PAGE_VALID) { > + elm_write_reg(info->elm_base + ELM_IRQSTATUS, > + reg_val & INTR_STATUS_PAGE_VALID); > + complete(&info->elm_completion); > + return IRQ_HANDLED; > + } > + > + return IRQ_NONE; > +} > + > +struct device *elm_request(enum bch_ecc bch_type) > +{ > + struct elm_info *info; > + > + list_for_each_entry(info, &elm_devices, list) { > + if (info && info->dev) { > + info->bch_type = bch_type; > + elm_config(info); > + return info->dev; > + } > + } > + > + return NULL; > +} > +EXPORT_SYMBOL(elm_request); > + > +static int __devinit elm_probe(struct platform_device *pdev) > +{ > + int ret = 0; > + struct resource *res, *irq; > + struct elm_info *info; > + > + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); > + if (!info) { > + dev_err(&pdev->dev, "failed to allocate memory\n"); > + return -ENOMEM; > + } > + > + info->dev = &pdev->dev; > + > + irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); > + if (!irq) { > + dev_err(&pdev->dev, "no irq resource defined\n"); > + return -ENODEV; > + } > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + if (!res) { > + dev_err(&pdev->dev, "no memory resource defined\n"); > + return -ENODEV; > + } > + > + > + info->elm_base = devm_request_and_ioremap(&pdev->dev, res); > + if (!info->elm_base) > + return -EADDRNOTAVAIL; > + > + > + ret = devm_request_irq(&pdev->dev, irq->start, elm_isr, 0, > + pdev->name, info); > + if (ret) { > + dev_err(&pdev->dev, "failure requesting irq %i\n", irq->start); > + return ret; > + } > + > + pm_runtime_enable(&pdev->dev); > + if (pm_runtime_get_sync(&pdev->dev)) { > + ret = -EINVAL; > + pm_runtime_disable(&pdev->dev); > + dev_err(&pdev->dev, "can't enable clock\n"); > + return ret; > + } > + > + init_completion(&info->elm_completion); > + INIT_LIST_HEAD(&info->list); > + list_add(&info->list, &elm_devices); > + platform_set_drvdata(pdev, info); > + return ret; > +} > + > +static int __devexit elm_remove(struct platform_device *pdev) > +{ > + pm_runtime_put_sync(&pdev->dev); > + pm_runtime_disable(&pdev->dev); > + platform_set_drvdata(pdev, NULL); > + return 0; > +} > + > + > +#ifdef CONFIG_OF > +static const struct of_device_id elm_of_match[] = { > + { .compatible = "ti,elm" }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, elm_of_match); > +#endif > + > +static struct platform_driver elm_driver = { > + .driver = { > + .name = "elm", > + .of_match_table = of_match_ptr(elm_of_match), > + .owner = THIS_MODULE, > + }, > + .probe = elm_probe, > + .remove = __devexit_p(elm_remove), > +}; > + > +module_platform_driver(elm_driver); > + > +MODULE_DESCRIPTION("ELM driver for BCH error correction"); > +MODULE_AUTHOR("Texas Instruments"); > +MODULE_ALIAS("platform: elm"); > +MODULE_LICENSE("GPL v2"); > diff --git a/include/linux/platform_data/elm.h b/include/linux/platform_data/elm.h > new file mode 100644 > index 0000000..eb53163 > --- /dev/null > +++ b/include/linux/platform_data/elm.h > @@ -0,0 +1,60 @@ > +/* > + * BCH Error Location Module > + * > + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + */ > + > +#ifndef __ELM_H > +#define __ELM_H > + > +enum bch_ecc { > + BCH4_ECC = 0, > + BCH8_ECC, > + BCH16_ECC, > +}; > + > +/* ELM support 8 error syndrome process */ > +#define ERROR_VECTOR_MAX 8 > +#define OOB_SECTOR_SIZE 16 > + > +#define BCH_MAX_ECC_BYTES_PER_SECTOR (OOB_SECTOR_SIZE * ERROR_VECTOR_MAX) > + > +#define BCH8_ECC_OOB_BYTES 13 > +/* RBL requires 14 byte even though BCH8 uses only 13 byte */ not sure what RBL is? > +#define BCH8_SIZE (BCH8_ECC_OOB_BYTES + 1) > +#define BCH4_SIZE 7 > + > +#define BCH8_SYNDROME_SIZE 4 /* 13 bytes of ecc */ > +#define BCH4_SYNDROME_SIZE 2 /* 7 bytes of ecc */ > + > +/** > + * struct elm_errorvec - error vector for elm > + * @error_reported: set true for vectors error is reported > + * > + * @error_count: number of correctable errors in the sector > + * @error_uncorrectable: number of uncorrectable errors > + * @error_loc: buffer for error location > + * > + */ > +struct elm_errorvec { > + bool error_reported; > + int error_count; > + int error_uncorrectable; > + int error_loc[ERROR_VECTOR_MAX]; > +}; > + > +void elm_decode_bch_error_page(struct device *dev, u8 *ecc_calc, > + struct elm_errorvec *err_vec); > +struct device *elm_request(enum bch_ecc bch_type); > +#endif /* __ELM_H */ >
On Wed, Oct 03, 2012 at 20:40:46, Peter Meerwald wrote: > > some minor nitpicks below > > > + * > > + * On completion of processing by elm module, error location status > > + * register updated with correctable/uncorrectable error information. > > + * In case of correctable errors, number of errors located from > > + * elm location status register & read the these many positions from > > should probably be: "... & read the positions from ..."? Ok I will correct it. > > > + * elm error location register. > > + */ > > +static void elm_error_correction(struct elm_info *info, > > + struct elm_errorvec *err_vec) > > +{ > > + int i, j, errors = 0; > > + void *err_loc_base = info->elm_base + ELM_ERROR_LOCATION_0; > > + elm_error_t *err_loc; > > + void *offset; > > + u32 reg_val; > > + > > + for (i = 0; i < ERROR_VECTOR_MAX; i++) { > > + /* check error reported */ > > + if (err_vec[i].error_reported) { > > + offset = info->elm_base + ELM_LOCATION_STATUS + > > + i * ERROR_LOCATION_SIZE; > > + reg_val = elm_read_reg(offset); > > + /* check correctable error or not */ > > + if (reg_val & ECC_CORRECTABLE_MASK) { > > + err_loc = err_loc_base + > > + i * ERROR_LOCATION_SIZE; > > + /* read count of correctable errors */ > > + err_vec[i].error_count = reg_val & > > + ECC_NB_ERRORS_MASK; > > + > > + /* update the error locations in error vector */ > > + for (j = 0; j < err_vec[i].error_count; j++) { > > + > > + reg_val = elm_read_reg(*err_loc + j); > > + err_vec[i].error_loc[j] = reg_val & > > + ECC_ERROR_LOCATION_MASK; > > + } > > + > > + errors += err_vec[i].error_count; > > + } else { > > + err_vec[i].error_uncorrectable++; > > + } > > extra braces above As per coding style This does not apply if only one branch of a conditional statement is a single statement; in the latter case use braces in both branches: > > > + > > + /* clearing interrupts for processed error vectors */ > > + elm_write_reg(info->elm_base + ELM_IRQSTATUS, BIT(i)); > > + > > + /* disable page mode */ > > + elm_configure_page_mode(info, i, false); > > + } > > + } > > + > > + return; > > +} > > + > > +/** > > + * elm_decode_bch_error_page - Locate error position > > + * @info: elm info > > should be dev, not info Ok I will correct it. > > > + * @ecc_calc: calculated ECC bytes from GPMC > > + * @err_vec: elm error vectors > > + * > > + * Called with one or greater reported and is vectors with error reported > > + * is updated in err_vec[].error_reported > > + */ > > I do not understand the statement "Called with one ..." elm_decode_bch_error_page() API will called from nand driver if and only if errors are present while reading page. Errors can be reported in one or multiple error vectors. I will reword it as. Called with one or more error reported vectors & vectors with error reported is updated in err_vec[].error_reported > [snip] > > + > > +#define BCH8_ECC_OOB_BYTES 13 > > +/* RBL requires 14 byte even though BCH8 uses only 13 byte */ > > not sure what RBL is? RBL stands for Rom boot Loader > > > +#define BCH8_SIZE (BCH8_ECC_OOB_BYTES + 1) > > +#define BCH4_SIZE 7 > > + > > +#define BCH8_SYNDROME_SIZE 4 /* 13 bytes of ecc */ > > +#define BCH4_SYNDROME_SIZE 2 /* 7 bytes of ecc */ > > + > > +/** > > + * struct elm_errorvec - error vector for elm > > + * @error_reported: set true for vectors error is reported > > + * > > + * @error_count: number of correctable errors in the sector > > + * @error_uncorrectable: number of uncorrectable errors > > + * @error_loc: buffer for error location > > + * > > + */ > > +struct elm_errorvec { > > + bool error_reported; > > + int error_count; > > + int error_uncorrectable; > > + int error_loc[ERROR_VECTOR_MAX]; > > +}; > > + > > +void elm_decode_bch_error_page(struct device *dev, u8 *ecc_calc, > > + struct elm_errorvec *err_vec); > > +struct device *elm_request(enum bch_ecc bch_type); > > +#endif /* __ELM_H */ > > > > -- > > Peter Meerwald > +43-664-2444418 (mobile) > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>>> Philip, Avinash <avinashphilip@ti.com> writes: > Platforms containing the ELM module can be used to correct errors > reported by BCH 4, 8 & 16 bit ECC scheme. For now only 4 & 8 bit > support is added. This sounds odd to me. What about something like: The ELM hardware module can be used to speedup BCH 4/8/16 ECC scheme error correction. For now only 4 & 8 bit support is added. > +++ b/drivers/mtd/devices/Makefile > @@ -17,8 +17,10 @@ obj-$(CONFIG_MTD_LART) += lart.o > obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o > obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o > obj-$(CONFIG_MTD_M25P80) += m25p80.o > +obj-$(CONFIG_MTD_NAND_OMAP2) += elm.o You seem to only use it in 4/4 if CONFIG_MTD_NAND_OMAP_BCH is set, so it probably makes more sense to use that symbol to not needlessly include it if it won't be used. > +++ b/drivers/mtd/devices/elm.c > @@ -0,0 +1,440 @@ > +/* > + * Error Location Module > + * > + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + */ > + > +#include <linux/platform_device.h> > +#include <linux/module.h> > +#include <linux/interrupt.h> > +#include <linux/io.h> > +#include <linux/of.h> > +#include <linux/pm_runtime.h> > +#include <linux/platform_data/elm.h> > + > +#define ELM_IRQSTATUS 0x018 > +#define ELM_IRQENABLE 0x01c > +#define ELM_LOCATION_CONFIG 0x020 > +#define ELM_PAGE_CTRL 0x080 > +#define ELM_SYNDROME_FRAGMENT_0 0x400 > +#define ELM_SYNDROME_FRAGMENT_6 0x418 > +#define ELM_LOCATION_STATUS 0x800 > +#define ELM_ERROR_LOCATION_0 0x880 > + > +/* ELM Interrupt Status Register */ > +#define INTR_STATUS_PAGE_VALID BIT(8) > + > +/* ELM Interrupt Enable Register */ > +#define INTR_EN_PAGE_MASK BIT(8) > + > +/* ELM Location Configuration Register */ > +#define ECC_BCH_LEVEL_MASK 0x3 > + > +/* ELM syndrome */ > +#define ELM_SYNDROME_VALID BIT(16) > + > +/* ELM_LOCATION_STATUS Register */ > +#define ECC_CORRECTABLE_MASK BIT(8) > +#define ECC_NB_ERRORS_MASK 0x1f > + > +/* ELM_ERROR_LOCATION_0-15 Registers */ > +#define ECC_ERROR_LOCATION_MASK 0x1fff > + > +#define ELM_ECC_SIZE 0x7ff > + > +#define SYNDROME_FRAGMENT_REG_SIZE 0x40 > +#define ERROR_LOCATION_SIZE 0x100 > +#define MAX_BCH_ELM_ERROR 16 > +#define ELM_FRAGMENT_REG 7 > + > +typedef u32 syn_t[ELM_FRAGMENT_REG]; > +typedef u32 elm_error_t[MAX_BCH_ELM_ERROR]; > + > +struct elm_info { > + struct device *dev; > + void __iomem *elm_base; > + struct completion elm_completion; > + struct list_head list; > + enum bch_ecc bch_type; > +}; > + > +static LIST_HEAD(elm_devices); > + > +static void elm_write_reg(void *offset, u32 val) > +{ > + writel(val, offset); > +} > + > +static u32 elm_read_reg(void *offset) > +{ > + return readl(offset); > +} As written these read/write wrappers don't add anything. How about passing struct elm_info and offset as an integer so you can drop elm_base from all call sites, E.G.: static void elm_write_reg(struct elm_info *info, int offset, u32 val) { writel(val, info->elm_base + offset); } > + > +/** > + * elm_config - Configure ELM module > + * @info: elm info > + */ > +static void elm_config(struct elm_info *info) > +{ > + u32 reg_val; > + > + reg_val = (info->bch_type & ECC_BCH_LEVEL_MASK) | (ELM_ECC_SIZE << 16); > + elm_write_reg(info->elm_base + ELM_LOCATION_CONFIG, reg_val); > +} > + > +/** > + * elm_configure_page_mode - Enable/Disable page mode > + * @info: elm info > + * @index: index number of syndrome fragment vector > + * @enable: enable/disable flag for page mode > + * > + * Enable page mode for syndrome fragment index > + */ > +static void elm_configure_page_mode(struct elm_info *info, int index, > + bool enable) > +{ > + u32 reg_val; > + > + reg_val = elm_read_reg(info->elm_base + ELM_PAGE_CTRL); > + if (enable) > + reg_val |= BIT(index); /* enable page mode */ > + else > + reg_val &= ~BIT(index); /* disable page mode */ > + > + elm_write_reg(info->elm_base + ELM_PAGE_CTRL, reg_val); > +} > + > +static void rearrange_bch4(u8 *syndrome) > +{ > + /* > + * BCH4 has 52 bit used for ecc, but OOB stored with > + * nibble 0 appended, removes appended 0 nibble > + */ > + u64 *dst = (u64 *)syndrome; > + *dst >>= 4; > +} > + > +/** > + * elm_reverse_eccdata - Reverse ecc data > + * @info: elm info > + * @ecc_data: buffer for calculated ecc > + * @syndrome: buffer for syndrome polynomial > + * > + * ecc_data has to be reversed for syndrome vector > + */ > +static void elm_reverse_eccdata(struct elm_info *info, u8 *ecc_data, > + u8 *syndrome) > +{ > + int i; > + int bch_size = info->bch_type ? BCH8_ECC_OOB_BYTES : BCH4_SIZE; > + > + for (i = 0; i < bch_size; i++) > + syndrome[bch_size - 1 - i] = ecc_data[i]; > + > + /* > + * syndrome polynomial to be rearranged for BCH 4 ecc scheme as 52 > + * bits being used and 4 bits being appended in syndrome vector > + */ > + if (info->bch_type == BCH4_ECC) > + rearrange_bch4(syndrome); > +} > + > +/** > + * elm_load_syndrome - Load ELM syndrome reg > + * @info: elm info > + * @index: syndrome fragment index > + * @syndrome: Syndrome polynomial > + * > + * Load syndrome fragment registers with syndrome polynomial > + */ > +static void elm_load_syndrome(struct elm_info *info, int index, u8 *syndrome) > +{ > + int i; > + int max = info->bch_type ? BCH8_SYNDROME_SIZE : BCH4_SYNDROME_SIZE; > + void *syn_frag_base = info->elm_base + ELM_SYNDROME_FRAGMENT_0; > + syn_t *syn_fragment; > + u32 reg_val; > + > + elm_configure_page_mode(info, index, true); > + syn_fragment = syn_frag_base + SYNDROME_FRAGMENT_REG_SIZE * index; > + > + for (i = 0; i < max; i++) { > + reg_val = syndrome[0] | syndrome[1] << 8 | syndrome[2] << 16 | > + syndrome[3] << 24; > + elm_write_reg(*syn_fragment + i, reg_val); > + /* Update syndrome polynomial pointer */ > + syndrome += 4; > + } > +} > + > +/** > + * elm_start_processing - start elm syndrome processing > + * @info: elm info > + * @err_vec: elm error vectors > + * > + * Set syndrome valid bit for syndrome fragment registers for which > + * elm syndrome fragment registers are loaded. This enables elm module > + * to start processing syndrome vectors. > + */ > +static void elm_start_processing(struct elm_info *info, > + struct elm_errorvec *err_vec) > +{ > + int i; > + void *offset; > + u32 reg_val; > + > + /* > + * Set syndrome vector valid so that ELM module will process it for > + * vectors error is reported > + */ > + for (i = 0; i < ERROR_VECTOR_MAX; i++) { > + if (err_vec[i].error_reported) { > + offset = info->elm_base + ELM_SYNDROME_FRAGMENT_6 + i * > + SYNDROME_FRAGMENT_REG_SIZE; > + reg_val = elm_read_reg(offset); > + reg_val |= ELM_SYNDROME_VALID; > + elm_write_reg(offset, reg_val); > + } > + } > +} > + > +/** > + * elm_error_correction - locate correctable error position > + * @info: elm info > + * @err_vec: elm error vectors > + * > + * On completion of processing by elm module, error location status > + * register updated with correctable/uncorrectable error information. > + * In case of correctable errors, number of errors located from > + * elm location status register & read the these many positions from > + * elm error location register. > + */ > +static void elm_error_correction(struct elm_info *info, > + struct elm_errorvec *err_vec) > +{ > + int i, j, errors = 0; > + void *err_loc_base = info->elm_base + ELM_ERROR_LOCATION_0; > + elm_error_t *err_loc; > + void *offset; > + u32 reg_val; > + > + for (i = 0; i < ERROR_VECTOR_MAX; i++) { > + /* check error reported */ > + if (err_vec[i].error_reported) { > + offset = info->elm_base + ELM_LOCATION_STATUS + > + i * ERROR_LOCATION_SIZE; > + reg_val = elm_read_reg(offset); > + /* check correctable error or not */ > + if (reg_val & ECC_CORRECTABLE_MASK) { > + err_loc = err_loc_base + > + i * ERROR_LOCATION_SIZE; > + /* read count of correctable errors */ > + err_vec[i].error_count = reg_val & > + ECC_NB_ERRORS_MASK; > + > + /* update the error locations in error vector */ > + for (j = 0; j < err_vec[i].error_count; j++) { > + > + reg_val = elm_read_reg(*err_loc + j); > + err_vec[i].error_loc[j] = reg_val & > + ECC_ERROR_LOCATION_MASK; > + } > + > + errors += err_vec[i].error_count; > + } else { > + err_vec[i].error_uncorrectable++; > + } > + > + /* clearing interrupts for processed error vectors */ > + elm_write_reg(info->elm_base + ELM_IRQSTATUS, BIT(i)); > + > + /* disable page mode */ > + elm_configure_page_mode(info, i, false); > + } > + } > + > + return; > +} > + > +/** > + * elm_decode_bch_error_page - Locate error position > + * @info: elm info > + * @ecc_calc: calculated ECC bytes from GPMC > + * @err_vec: elm error vectors > + * > + * Called with one or greater reported and is vectors with error reported > + * is updated in err_vec[].error_reported > + */ > +void elm_decode_bch_error_page(struct device *dev, u8 *ecc_calc, > + struct elm_errorvec *err_vec) > +{ > + int i; > + u8 syndrome[BCH_MAX_ECC_BYTES_PER_SECTOR] = {0}, *syn_p; Why do you need to keep the entire syndrome around? You seem to only use it between elm_reverse_eccdata() and elm_load_syndrome(), so it could as well be BCH8_ECC_OOB_BYTES long (or rather a multiple of sizeof(u32). It would also be good to do the shuffeling directly in elm_load_syndrome so you don't need the extra copy. > + struct elm_info *info = dev_get_drvdata(dev); > + u32 reg_val; > + > + /* enable page mode interrupt */ > + reg_val = elm_read_reg(info->elm_base + ELM_IRQSTATUS); > + elm_write_reg(info->elm_base + ELM_IRQSTATUS, > + reg_val & INTR_STATUS_PAGE_VALID); > + elm_write_reg(info->elm_base + ELM_IRQENABLE, INTR_EN_PAGE_MASK); > + > + syn_p = syndrome; > + for (i = 0; i < ERROR_VECTOR_MAX; i++) { > + if (err_vec[i].error_reported) { > + elm_reverse_eccdata(info, ecc_calc, syn_p); > + elm_load_syndrome(info, i, syn_p); > + } > + > + ecc_calc += info->bch_type ? BCH8_SIZE : BCH4_SIZE; > + syn_p += OOB_SECTOR_SIZE; > + } > + > + elm_start_processing(info, err_vec); > + > + /* > + * In case of error reported, wait for ELM module to finish > + * locating error correction > + */ > + wait_for_completion(&info->elm_completion); > + > + /* disable page mode interrupt */ > + reg_val = elm_read_reg(info->elm_base + ELM_IRQENABLE); > + elm_write_reg(info->elm_base + ELM_IRQENABLE, > + reg_val & ~INTR_EN_PAGE_MASK); > + elm_error_correction(info, err_vec); > +} > +EXPORT_SYMBOL(elm_decode_bch_error_page); > + > +static irqreturn_t elm_isr(int this_irq, void *dev_id) > +{ > + u32 reg_val; > + struct elm_info *info = dev_id; > + > + reg_val = elm_read_reg(info->elm_base + ELM_IRQSTATUS); > + > + /* all error vectors processed */ > + if (reg_val & INTR_STATUS_PAGE_VALID) { > + elm_write_reg(info->elm_base + ELM_IRQSTATUS, > + reg_val & INTR_STATUS_PAGE_VALID); > + complete(&info->elm_completion); > + return IRQ_HANDLED; > + } > + > + return IRQ_NONE; > +} > + > +struct device *elm_request(enum bch_ecc bch_type) > +{ > + struct elm_info *info; > + > + list_for_each_entry(info, &elm_devices, list) { > + if (info && info->dev) { > + info->bch_type = bch_type; > + elm_config(info); > + return info->dev; > + } > + } > + > + return NULL; > +} > +EXPORT_SYMBOL(elm_request); > + > +static int __devinit elm_probe(struct platform_device *pdev) > +{ > + int ret = 0; > + struct resource *res, *irq; > + struct elm_info *info; > + > + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); > + if (!info) { > + dev_err(&pdev->dev, "failed to allocate memory\n"); > + return -ENOMEM; > + } > + > + info->dev = &pdev->dev; > + > + irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); > + if (!irq) { > + dev_err(&pdev->dev, "no irq resource defined\n"); > + return -ENODEV; > + } > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + if (!res) { > + dev_err(&pdev->dev, "no memory resource defined\n"); > + return -ENODEV; > + } > + > + > + info->elm_base = devm_request_and_ioremap(&pdev->dev, res); > + if (!info->elm_base) > + return -EADDRNOTAVAIL; > + > + > + ret = devm_request_irq(&pdev->dev, irq->start, elm_isr, 0, > + pdev->name, info); > + if (ret) { > + dev_err(&pdev->dev, "failure requesting irq %i\n", irq->start); > + return ret; > + } > + > + pm_runtime_enable(&pdev->dev); > + if (pm_runtime_get_sync(&pdev->dev)) { > + ret = -EINVAL; > + pm_runtime_disable(&pdev->dev); > + dev_err(&pdev->dev, "can't enable clock\n"); > + return ret; > + } > + > + init_completion(&info->elm_completion); > + INIT_LIST_HEAD(&info->list); > + list_add(&info->list, &elm_devices); > + platform_set_drvdata(pdev, info); > + return ret; > +} > + > +static int __devexit elm_remove(struct platform_device *pdev) > +{ > + pm_runtime_put_sync(&pdev->dev); > + pm_runtime_disable(&pdev->dev); > + platform_set_drvdata(pdev, NULL); > + return 0; > +} > + > + > +#ifdef CONFIG_OF > +static const struct of_device_id elm_of_match[] = { > + { .compatible = "ti,elm" }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, elm_of_match); > +#endif > + > +static struct platform_driver elm_driver = { > + .driver = { > + .name = "elm", > + .of_match_table = of_match_ptr(elm_of_match), > + .owner = THIS_MODULE, > + }, > + .probe = elm_probe, > + .remove = __devexit_p(elm_remove), > +}; > + > +module_platform_driver(elm_driver); > + > +MODULE_DESCRIPTION("ELM driver for BCH error correction"); > +MODULE_AUTHOR("Texas Instruments"); > +MODULE_ALIAS("platform: elm"); > +MODULE_LICENSE("GPL v2"); > diff --git a/include/linux/platform_data/elm.h b/include/linux/platform_data/elm.h > new file mode 100644 > index 0000000..eb53163 > --- /dev/null > +++ b/include/linux/platform_data/elm.h > @@ -0,0 +1,60 @@ > +/* > + * BCH Error Location Module > + * > + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + */ > + > +#ifndef __ELM_H > +#define __ELM_H > + > +enum bch_ecc { > + BCH4_ECC = 0, > + BCH8_ECC, > + BCH16_ECC, It probably makes more sense to not provide the enum value for BCH16 as you don't support it. > +}; > + > +/* ELM support 8 error syndrome process */ > +#define ERROR_VECTOR_MAX 8 > +#define OOB_SECTOR_SIZE 16 > + > +#define BCH_MAX_ECC_BYTES_PER_SECTOR (OOB_SECTOR_SIZE * ERROR_VECTOR_MAX) > + > +#define BCH8_ECC_OOB_BYTES 13 > +/* RBL requires 14 byte even though BCH8 uses only 13 byte */ > +#define BCH8_SIZE (BCH8_ECC_OOB_BYTES + 1) > +#define BCH4_SIZE 7 > + > +#define BCH8_SYNDROME_SIZE 4 /* 13 bytes of ecc */ > +#define BCH4_SYNDROME_SIZE 2 /* 7 bytes of ecc */ > + > +/** > + * struct elm_errorvec - error vector for elm > + * @error_reported: set true for vectors error is reported > + * > + * @error_count: number of correctable errors in the sector > + * @error_uncorrectable: number of uncorrectable errors > + * @error_loc: buffer for error location > + * > + */ > +struct elm_errorvec { > + bool error_reported; > + int error_count; > + int error_uncorrectable; > + int error_loc[ERROR_VECTOR_MAX]; > +}; > + > +void elm_decode_bch_error_page(struct device *dev, u8 *ecc_calc, > + struct elm_errorvec *err_vec); > +struct device *elm_request(enum bch_ecc bch_type); > +#endif /* __ELM_H */ > -- > 1.7.0.4 > ______________________________________________________ > Linux MTD discussion mailing list > http://lists.infradead.org/mailman/listinfo/linux-mtd/
On Tue, Oct 16, 2012 at 01:10:47, Peter Korsgaard wrote: > >>>>> Philip, Avinash <avinashphilip@ti.com> writes: > > > Platforms containing the ELM module can be used to correct errors > > reported by BCH 4, 8 & 16 bit ECC scheme. For now only 4 & 8 bit > > support is added. > > This sounds odd to me. What about something like: > > The ELM hardware module can be used to speedup BCH 4/8/16 ECC scheme > error correction. > > For now only 4 & 8 bit support is added. Ok I will correct it. > > > > +++ b/drivers/mtd/devices/Makefile > > @@ -17,8 +17,10 @@ obj-$(CONFIG_MTD_LART) += lart.o > > obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o > > obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o > > obj-$(CONFIG_MTD_M25P80) += m25p80.o > > +obj-$(CONFIG_MTD_NAND_OMAP2) += elm.o > > You seem to only use it in 4/4 if CONFIG_MTD_NAND_OMAP_BCH is set, so it > probably makes more sense to use that symbol to not needlessly include > it if it won't be used. Ok. This been good. > > > > +static void elm_write_reg(void *offset, u32 val) > > +{ > > + writel(val, offset); > > +} > > + > > +static u32 elm_read_reg(void *offset) > > +{ > > + return readl(offset); > > +} > > As written these read/write wrappers don't add anything. How about > passing struct elm_info and offset as an integer so you can drop > elm_base from all call sites, E.G.: > > static void elm_write_reg(struct elm_info *info, int offset, u32 val) > { > writel(val, info->elm_base + offset); > } > Ok, this helps to reduce some indentation levels also. > > > +void elm_decode_bch_error_page(struct device *dev, u8 *ecc_calc, > > + struct elm_errorvec *err_vec) > > +{ > > + int i; > > + u8 syndrome[BCH_MAX_ECC_BYTES_PER_SECTOR] = {0}, *syn_p; > > > Why do you need to keep the entire syndrome around? You seem to only use > it between elm_reverse_eccdata() and elm_load_syndrome(), so it could as > well be BCH8_ECC_OOB_BYTES long (or rather a multiple of sizeof(u32). > > It would also be good to do the shuffeling directly in elm_load_syndrome > so you don't need the extra copy. I will check. > > > > + */ > > + > > +#ifndef __ELM_H > > +#define __ELM_H > > + > > +enum bch_ecc { > > + BCH4_ECC = 0, > > + BCH8_ECC, > > + BCH16_ECC, > > It probably makes more sense to not provide the enum value for BCH16 as > you don't support it. > Ok I will remove. > > > +}; > > + Thanks Avinash -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/mtd/elm.txt b/Documentation/devicetree/bindings/mtd/elm.txt new file mode 100644 index 0000000..b88ee83 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/elm.txt @@ -0,0 +1,18 @@ +Error location module + +Required properties: +- compatible: Must be "ti,elm" +- reg: physical base address and size of the registers map. +- interrupts: Interrupt number for the elm. +- interrupt-parent: The parent interrupt controller + +Optional properties: +- ti,hwmods: Name of the hwmod associated to the elm + +Example: +elm: elm@0 { + compatible = "ti,elm"; + reg = <0x48080000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <4>; +}; diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile index 395733a..0f6a94b 100644 --- a/drivers/mtd/devices/Makefile +++ b/drivers/mtd/devices/Makefile @@ -17,8 +17,10 @@ obj-$(CONFIG_MTD_LART) += lart.o obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o obj-$(CONFIG_MTD_M25P80) += m25p80.o +obj-$(CONFIG_MTD_NAND_OMAP2) += elm.o obj-$(CONFIG_MTD_SPEAR_SMI) += spear_smi.o obj-$(CONFIG_MTD_SST25L) += sst25l.o obj-$(CONFIG_MTD_BCM47XXSFLASH) += bcm47xxsflash.o -CFLAGS_docg3.o += -I$(src) \ No newline at end of file + +CFLAGS_docg3.o += -I$(src) diff --git a/drivers/mtd/devices/elm.c b/drivers/mtd/devices/elm.c new file mode 100644 index 0000000..802b572 --- /dev/null +++ b/drivers/mtd/devices/elm.c @@ -0,0 +1,440 @@ +/* + * Error Location Module + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/pm_runtime.h> +#include <linux/platform_data/elm.h> + +#define ELM_IRQSTATUS 0x018 +#define ELM_IRQENABLE 0x01c +#define ELM_LOCATION_CONFIG 0x020 +#define ELM_PAGE_CTRL 0x080 +#define ELM_SYNDROME_FRAGMENT_0 0x400 +#define ELM_SYNDROME_FRAGMENT_6 0x418 +#define ELM_LOCATION_STATUS 0x800 +#define ELM_ERROR_LOCATION_0 0x880 + +/* ELM Interrupt Status Register */ +#define INTR_STATUS_PAGE_VALID BIT(8) + +/* ELM Interrupt Enable Register */ +#define INTR_EN_PAGE_MASK BIT(8) + +/* ELM Location Configuration Register */ +#define ECC_BCH_LEVEL_MASK 0x3 + +/* ELM syndrome */ +#define ELM_SYNDROME_VALID BIT(16) + +/* ELM_LOCATION_STATUS Register */ +#define ECC_CORRECTABLE_MASK BIT(8) +#define ECC_NB_ERRORS_MASK 0x1f + +/* ELM_ERROR_LOCATION_0-15 Registers */ +#define ECC_ERROR_LOCATION_MASK 0x1fff + +#define ELM_ECC_SIZE 0x7ff + +#define SYNDROME_FRAGMENT_REG_SIZE 0x40 +#define ERROR_LOCATION_SIZE 0x100 +#define MAX_BCH_ELM_ERROR 16 +#define ELM_FRAGMENT_REG 7 + +typedef u32 syn_t[ELM_FRAGMENT_REG]; +typedef u32 elm_error_t[MAX_BCH_ELM_ERROR]; + +struct elm_info { + struct device *dev; + void __iomem *elm_base; + struct completion elm_completion; + struct list_head list; + enum bch_ecc bch_type; +}; + +static LIST_HEAD(elm_devices); + +static void elm_write_reg(void *offset, u32 val) +{ + writel(val, offset); +} + +static u32 elm_read_reg(void *offset) +{ + return readl(offset); +} + +/** + * elm_config - Configure ELM module + * @info: elm info + */ +static void elm_config(struct elm_info *info) +{ + u32 reg_val; + + reg_val = (info->bch_type & ECC_BCH_LEVEL_MASK) | (ELM_ECC_SIZE << 16); + elm_write_reg(info->elm_base + ELM_LOCATION_CONFIG, reg_val); +} + +/** + * elm_configure_page_mode - Enable/Disable page mode + * @info: elm info + * @index: index number of syndrome fragment vector + * @enable: enable/disable flag for page mode + * + * Enable page mode for syndrome fragment index + */ +static void elm_configure_page_mode(struct elm_info *info, int index, + bool enable) +{ + u32 reg_val; + + reg_val = elm_read_reg(info->elm_base + ELM_PAGE_CTRL); + if (enable) + reg_val |= BIT(index); /* enable page mode */ + else + reg_val &= ~BIT(index); /* disable page mode */ + + elm_write_reg(info->elm_base + ELM_PAGE_CTRL, reg_val); +} + +static void rearrange_bch4(u8 *syndrome) +{ + /* + * BCH4 has 52 bit used for ecc, but OOB stored with + * nibble 0 appended, removes appended 0 nibble + */ + u64 *dst = (u64 *)syndrome; + *dst >>= 4; +} + +/** + * elm_reverse_eccdata - Reverse ecc data + * @info: elm info + * @ecc_data: buffer for calculated ecc + * @syndrome: buffer for syndrome polynomial + * + * ecc_data has to be reversed for syndrome vector + */ +static void elm_reverse_eccdata(struct elm_info *info, u8 *ecc_data, + u8 *syndrome) +{ + int i; + int bch_size = info->bch_type ? BCH8_ECC_OOB_BYTES : BCH4_SIZE; + + for (i = 0; i < bch_size; i++) + syndrome[bch_size - 1 - i] = ecc_data[i]; + + /* + * syndrome polynomial to be rearranged for BCH 4 ecc scheme as 52 + * bits being used and 4 bits being appended in syndrome vector + */ + if (info->bch_type == BCH4_ECC) + rearrange_bch4(syndrome); +} + +/** + * elm_load_syndrome - Load ELM syndrome reg + * @info: elm info + * @index: syndrome fragment index + * @syndrome: Syndrome polynomial + * + * Load syndrome fragment registers with syndrome polynomial + */ +static void elm_load_syndrome(struct elm_info *info, int index, u8 *syndrome) +{ + int i; + int max = info->bch_type ? BCH8_SYNDROME_SIZE : BCH4_SYNDROME_SIZE; + void *syn_frag_base = info->elm_base + ELM_SYNDROME_FRAGMENT_0; + syn_t *syn_fragment; + u32 reg_val; + + elm_configure_page_mode(info, index, true); + syn_fragment = syn_frag_base + SYNDROME_FRAGMENT_REG_SIZE * index; + + for (i = 0; i < max; i++) { + reg_val = syndrome[0] | syndrome[1] << 8 | syndrome[2] << 16 | + syndrome[3] << 24; + elm_write_reg(*syn_fragment + i, reg_val); + /* Update syndrome polynomial pointer */ + syndrome += 4; + } +} + +/** + * elm_start_processing - start elm syndrome processing + * @info: elm info + * @err_vec: elm error vectors + * + * Set syndrome valid bit for syndrome fragment registers for which + * elm syndrome fragment registers are loaded. This enables elm module + * to start processing syndrome vectors. + */ +static void elm_start_processing(struct elm_info *info, + struct elm_errorvec *err_vec) +{ + int i; + void *offset; + u32 reg_val; + + /* + * Set syndrome vector valid so that ELM module will process it for + * vectors error is reported + */ + for (i = 0; i < ERROR_VECTOR_MAX; i++) { + if (err_vec[i].error_reported) { + offset = info->elm_base + ELM_SYNDROME_FRAGMENT_6 + i * + SYNDROME_FRAGMENT_REG_SIZE; + reg_val = elm_read_reg(offset); + reg_val |= ELM_SYNDROME_VALID; + elm_write_reg(offset, reg_val); + } + } +} + +/** + * elm_error_correction - locate correctable error position + * @info: elm info + * @err_vec: elm error vectors + * + * On completion of processing by elm module, error location status + * register updated with correctable/uncorrectable error information. + * In case of correctable errors, number of errors located from + * elm location status register & read the these many positions from + * elm error location register. + */ +static void elm_error_correction(struct elm_info *info, + struct elm_errorvec *err_vec) +{ + int i, j, errors = 0; + void *err_loc_base = info->elm_base + ELM_ERROR_LOCATION_0; + elm_error_t *err_loc; + void *offset; + u32 reg_val; + + for (i = 0; i < ERROR_VECTOR_MAX; i++) { + /* check error reported */ + if (err_vec[i].error_reported) { + offset = info->elm_base + ELM_LOCATION_STATUS + + i * ERROR_LOCATION_SIZE; + reg_val = elm_read_reg(offset); + /* check correctable error or not */ + if (reg_val & ECC_CORRECTABLE_MASK) { + err_loc = err_loc_base + + i * ERROR_LOCATION_SIZE; + /* read count of correctable errors */ + err_vec[i].error_count = reg_val & + ECC_NB_ERRORS_MASK; + + /* update the error locations in error vector */ + for (j = 0; j < err_vec[i].error_count; j++) { + + reg_val = elm_read_reg(*err_loc + j); + err_vec[i].error_loc[j] = reg_val & + ECC_ERROR_LOCATION_MASK; + } + + errors += err_vec[i].error_count; + } else { + err_vec[i].error_uncorrectable++; + } + + /* clearing interrupts for processed error vectors */ + elm_write_reg(info->elm_base + ELM_IRQSTATUS, BIT(i)); + + /* disable page mode */ + elm_configure_page_mode(info, i, false); + } + } + + return; +} + +/** + * elm_decode_bch_error_page - Locate error position + * @info: elm info + * @ecc_calc: calculated ECC bytes from GPMC + * @err_vec: elm error vectors + * + * Called with one or greater reported and is vectors with error reported + * is updated in err_vec[].error_reported + */ +void elm_decode_bch_error_page(struct device *dev, u8 *ecc_calc, + struct elm_errorvec *err_vec) +{ + int i; + u8 syndrome[BCH_MAX_ECC_BYTES_PER_SECTOR] = {0}, *syn_p; + struct elm_info *info = dev_get_drvdata(dev); + u32 reg_val; + + /* enable page mode interrupt */ + reg_val = elm_read_reg(info->elm_base + ELM_IRQSTATUS); + elm_write_reg(info->elm_base + ELM_IRQSTATUS, + reg_val & INTR_STATUS_PAGE_VALID); + elm_write_reg(info->elm_base + ELM_IRQENABLE, INTR_EN_PAGE_MASK); + + syn_p = syndrome; + for (i = 0; i < ERROR_VECTOR_MAX; i++) { + if (err_vec[i].error_reported) { + elm_reverse_eccdata(info, ecc_calc, syn_p); + elm_load_syndrome(info, i, syn_p); + } + + ecc_calc += info->bch_type ? BCH8_SIZE : BCH4_SIZE; + syn_p += OOB_SECTOR_SIZE; + } + + elm_start_processing(info, err_vec); + + /* + * In case of error reported, wait for ELM module to finish + * locating error correction + */ + wait_for_completion(&info->elm_completion); + + /* disable page mode interrupt */ + reg_val = elm_read_reg(info->elm_base + ELM_IRQENABLE); + elm_write_reg(info->elm_base + ELM_IRQENABLE, + reg_val & ~INTR_EN_PAGE_MASK); + elm_error_correction(info, err_vec); +} +EXPORT_SYMBOL(elm_decode_bch_error_page); + +static irqreturn_t elm_isr(int this_irq, void *dev_id) +{ + u32 reg_val; + struct elm_info *info = dev_id; + + reg_val = elm_read_reg(info->elm_base + ELM_IRQSTATUS); + + /* all error vectors processed */ + if (reg_val & INTR_STATUS_PAGE_VALID) { + elm_write_reg(info->elm_base + ELM_IRQSTATUS, + reg_val & INTR_STATUS_PAGE_VALID); + complete(&info->elm_completion); + return IRQ_HANDLED; + } + + return IRQ_NONE; +} + +struct device *elm_request(enum bch_ecc bch_type) +{ + struct elm_info *info; + + list_for_each_entry(info, &elm_devices, list) { + if (info && info->dev) { + info->bch_type = bch_type; + elm_config(info); + return info->dev; + } + } + + return NULL; +} +EXPORT_SYMBOL(elm_request); + +static int __devinit elm_probe(struct platform_device *pdev) +{ + int ret = 0; + struct resource *res, *irq; + struct elm_info *info; + + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); + if (!info) { + dev_err(&pdev->dev, "failed to allocate memory\n"); + return -ENOMEM; + } + + info->dev = &pdev->dev; + + irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!irq) { + dev_err(&pdev->dev, "no irq resource defined\n"); + return -ENODEV; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "no memory resource defined\n"); + return -ENODEV; + } + + + info->elm_base = devm_request_and_ioremap(&pdev->dev, res); + if (!info->elm_base) + return -EADDRNOTAVAIL; + + + ret = devm_request_irq(&pdev->dev, irq->start, elm_isr, 0, + pdev->name, info); + if (ret) { + dev_err(&pdev->dev, "failure requesting irq %i\n", irq->start); + return ret; + } + + pm_runtime_enable(&pdev->dev); + if (pm_runtime_get_sync(&pdev->dev)) { + ret = -EINVAL; + pm_runtime_disable(&pdev->dev); + dev_err(&pdev->dev, "can't enable clock\n"); + return ret; + } + + init_completion(&info->elm_completion); + INIT_LIST_HEAD(&info->list); + list_add(&info->list, &elm_devices); + platform_set_drvdata(pdev, info); + return ret; +} + +static int __devexit elm_remove(struct platform_device *pdev) +{ + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + platform_set_drvdata(pdev, NULL); + return 0; +} + + +#ifdef CONFIG_OF +static const struct of_device_id elm_of_match[] = { + { .compatible = "ti,elm" }, + {}, +}; +MODULE_DEVICE_TABLE(of, elm_of_match); +#endif + +static struct platform_driver elm_driver = { + .driver = { + .name = "elm", + .of_match_table = of_match_ptr(elm_of_match), + .owner = THIS_MODULE, + }, + .probe = elm_probe, + .remove = __devexit_p(elm_remove), +}; + +module_platform_driver(elm_driver); + +MODULE_DESCRIPTION("ELM driver for BCH error correction"); +MODULE_AUTHOR("Texas Instruments"); +MODULE_ALIAS("platform: elm"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/platform_data/elm.h b/include/linux/platform_data/elm.h new file mode 100644 index 0000000..eb53163 --- /dev/null +++ b/include/linux/platform_data/elm.h @@ -0,0 +1,60 @@ +/* + * BCH Error Location Module + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __ELM_H +#define __ELM_H + +enum bch_ecc { + BCH4_ECC = 0, + BCH8_ECC, + BCH16_ECC, +}; + +/* ELM support 8 error syndrome process */ +#define ERROR_VECTOR_MAX 8 +#define OOB_SECTOR_SIZE 16 + +#define BCH_MAX_ECC_BYTES_PER_SECTOR (OOB_SECTOR_SIZE * ERROR_VECTOR_MAX) + +#define BCH8_ECC_OOB_BYTES 13 +/* RBL requires 14 byte even though BCH8 uses only 13 byte */ +#define BCH8_SIZE (BCH8_ECC_OOB_BYTES + 1) +#define BCH4_SIZE 7 + +#define BCH8_SYNDROME_SIZE 4 /* 13 bytes of ecc */ +#define BCH4_SYNDROME_SIZE 2 /* 7 bytes of ecc */ + +/** + * struct elm_errorvec - error vector for elm + * @error_reported: set true for vectors error is reported + * + * @error_count: number of correctable errors in the sector + * @error_uncorrectable: number of uncorrectable errors + * @error_loc: buffer for error location + * + */ +struct elm_errorvec { + bool error_reported; + int error_count; + int error_uncorrectable; + int error_loc[ERROR_VECTOR_MAX]; +}; + +void elm_decode_bch_error_page(struct device *dev, u8 *ecc_calc, + struct elm_errorvec *err_vec); +struct device *elm_request(enum bch_ecc bch_type); +#endif /* __ELM_H */
Platforms containing the ELM module can be used to correct errors reported by BCH 4, 8 & 16 bit ECC scheme. For now only 4 & 8 bit support is added. Signed-off-by: Philip, Avinash <avinashphilip@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> --- :000000 100644 0000000... b88ee83... A Documentation/devicetree/bindings/mtd/elm.txt :100644 100644 395733a... 0f6a94b... M drivers/mtd/devices/Makefile :000000 100644 0000000... 802b572... A drivers/mtd/devices/elm.c :000000 100644 0000000... eb53163... A include/linux/platform_data/elm.h Documentation/devicetree/bindings/mtd/elm.txt | 18 + drivers/mtd/devices/Makefile | 4 +- drivers/mtd/devices/elm.c | 440 +++++++++++++++++++++++++ include/linux/platform_data/elm.h | 60 ++++ 4 files changed, 521 insertions(+), 1 deletions(-)