| Message ID | 1349274589-11389-2-git-send-email-avinashphilip@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
>>>>> Philip, Avinash <avinashphilip@ti.com> writes: > Update number of errors using nand ecc strength. > Also add macro definitions BCH8_ERROR_MAX & BCH4_ERROR_MAX > Signed-off-by: Philip, Avinash <avinashphilip@ti.com> > --- > :100644 100644 5b31386... af511a9... M drivers/mtd/nand/omap2.c > drivers/mtd/nand/omap2.c | 12 ++++++++---- > 1 files changed, 8 insertions(+), 4 deletions(-) > diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c > index 5b31386..af511a9 100644 > --- a/drivers/mtd/nand/omap2.c > +++ b/drivers/mtd/nand/omap2.c > @@ -111,6 +111,9 @@ > #define ECCCLEAR 0x100 > #define ECC1 0x1 > +#define BCH8_MAX_ERROR 8 /* upto 8 bit coorectable */ > +#define BCH4_MAX_ERROR 4 /* upto 4 bit correctable */ First 'correctable' misspelled. I don't personally think these defines improve readability very much compared to to just using 4/8, though.
On Tue, Oct 16, 2012 at 00:26:40, Peter Korsgaard wrote: > >>>>> Philip, Avinash <avinashphilip@ti.com> writes: > > > Update number of errors using nand ecc strength. > > Also add macro definitions BCH8_ERROR_MAX & BCH4_ERROR_MAX > > > Signed-off-by: Philip, Avinash <avinashphilip@ti.com> > > --- > > :100644 100644 5b31386... af511a9... M drivers/mtd/nand/omap2.c > > drivers/mtd/nand/omap2.c | 12 ++++++++---- > > 1 files changed, 8 insertions(+), 4 deletions(-) > > > diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c > > index 5b31386..af511a9 100644 > > --- a/drivers/mtd/nand/omap2.c > > +++ b/drivers/mtd/nand/omap2.c > > @@ -111,6 +111,9 @@ > > #define ECCCLEAR 0x100 > > #define ECC1 0x1 > > > +#define BCH8_MAX_ERROR 8 /* upto 8 bit coorectable */ > > +#define BCH4_MAX_ERROR 4 /* upto 4 bit correctable */ > > First 'correctable' misspelled. I will correct it > > I don't personally think these defines improve readability very much > compared to to just using 4/8, though. Thought of removing magic numbers & provide information also. Thanks Avinash > > -- > Bye, Peter Korsgaard > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index 5b31386..af511a9 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -111,6 +111,9 @@ #define ECCCLEAR 0x100 #define ECC1 0x1 +#define BCH8_MAX_ERROR 8 /* upto 8 bit coorectable */ +#define BCH4_MAX_ERROR 4 /* upto 4 bit correctable */ + /* oob info generated runtime depending on ecc algorithm and layout selected */ static struct nand_ecclayout omap_oobinfo; /* Define some generic bad / good block scan pattern which are used @@ -1034,7 +1037,7 @@ static void omap3_enable_hwecc_bch(struct mtd_info *mtd, int mode) mtd); struct nand_chip *chip = mtd->priv; - nerrors = (info->nand.ecc.bytes == 13) ? 8 : 4; + nerrors = info->nand.ecc.strength; dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0; /* * Program GPMC to perform correction on one 512-byte sector at a time. @@ -1129,13 +1132,14 @@ static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt) struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, mtd); #ifdef CONFIG_MTD_NAND_OMAP_BCH8 - const int hw_errors = 8; + const int hw_errors = BCH8_MAX_ERROR; #else - const int hw_errors = 4; + const int hw_errors = BCH4_MAX_ERROR; #endif info->bch = NULL; - max_errors = (ecc_opt == OMAP_ECC_BCH8_CODE_HW) ? 8 : 4; + max_errors = (ecc_opt == OMAP_ECC_BCH8_CODE_HW) ? + BCH8_MAX_ERROR : BCH4_MAX_ERROR; if (max_errors != hw_errors) { pr_err("cannot configure %d-bit BCH ecc, only %d-bit supported", max_errors, hw_errors);
Update number of errors using nand ecc strength. Also add macro definitions BCH8_ERROR_MAX & BCH4_ERROR_MAX Signed-off-by: Philip, Avinash <avinashphilip@ti.com> --- :100644 100644 5b31386... af511a9... M drivers/mtd/nand/omap2.c drivers/mtd/nand/omap2.c | 12 ++++++++---- 1 files changed, 8 insertions(+), 4 deletions(-)