| Message ID | 1350946719-9583-1-git-send-email-khilman@deeprootsystems.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Kevin Hilman <khilman@deeprootsystems.com> writes: > From: Kevin Hilman <khilman@ti.com> > > After commit 24d7b40a60cf19008334bcbcbd98da374d4d9c64 (ARM: OMAP2+: > PM: MPU DVFS: use generic CPU device for MPU-SS), OPPs are registered > using an existing CPU device, not the omap_device for MPU-SS. > > First, fix the board file to use get_cpu_device() as required by the > above commit, otherwise custom OPPs will be added to the wrong device. > > Second, the board files OPP init is called from the its init_machine > method, and the generic CPU devices are not yet created when > init_machine is run. Therefore OPP initialization will fail. To fix, > use a device_initcall() for the board file's OPP customization, and > make the device_initcall board-specific by using a machine_is check. > > Reported-by: Paul Walmsley <paul@pwsan.com> > Signed-off-by: Kevin Hilman <khilman@ti.com> > --- > v2: add machine_is* check to the device_initcall. > > arch/arm/mach-omap2/board-omap3beagle.c | 20 ++++++++++++-------- > 1 file changed, 12 insertions(+), 8 deletions(-) > > diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c > index 388c431..60729bf 100644 > --- a/arch/arm/mach-omap2/board-omap3beagle.c > +++ b/arch/arm/mach-omap2/board-omap3beagle.c > @@ -24,6 +24,7 @@ > #include <linux/input.h> > #include <linux/gpio_keys.h> > #include <linux/opp.h> > +#include <linux/cpu.h> > > #include <linux/mtd/mtd.h> > #include <linux/mtd/partitions.h> > @@ -444,12 +445,16 @@ static struct omap_board_mux board_mux[] __initdata = { > }; > #endif > > -static void __init beagle_opp_init(void) > +static int __init beagle_opp_init(void) > { > int r = 0; > > - /* Initialize the omap3 opp table */ > - if (omap3_opp_init()) { > + if (!machine_is_omap3_beagle()) > + return 0; > + > + /* Initialize the omap3 opp table if not already created. */ > + r = omap3_opp_init(); > + if (IS_ERR_VALUE(r) && (r != -EEXIST)) { > pr_err("%s: opp default init failed\n", __func__); > return; oops, sent wrong version. The one queued locally has 'return r' here. Kevin > } > @@ -458,13 +463,13 @@ static void __init beagle_opp_init(void) > if (cpu_is_omap3630()) { > struct device *mpu_dev, *iva_dev; > > - mpu_dev = omap_device_get_by_hwmod_name("mpu"); > + mpu_dev = get_cpu_device(0); > iva_dev = omap_device_get_by_hwmod_name("iva"); > > if (IS_ERR(mpu_dev) || IS_ERR(iva_dev)) { > pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n", > __func__, mpu_dev, iva_dev); > - return; > + return -ENODEV; > } > /* Enable MPU 1GHz and lower opps */ > r = opp_enable(mpu_dev, 800000000); > @@ -484,8 +489,9 @@ static void __init beagle_opp_init(void) > opp_disable(iva_dev, 660000000); > } > } > - return; > + return 0; > } > +device_initcall(beagle_opp_init); > > static void __init omap3_beagle_init(void) > { > @@ -522,8 +528,6 @@ static void __init omap3_beagle_init(void) > /* Ensure SDRC pins are mux'd for self-refresh */ > omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); > omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); > - > - beagle_opp_init(); > } > > MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 388c431..60729bf 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -24,6 +24,7 @@ #include <linux/input.h> #include <linux/gpio_keys.h> #include <linux/opp.h> +#include <linux/cpu.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -444,12 +445,16 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static void __init beagle_opp_init(void) +static int __init beagle_opp_init(void) { int r = 0; - /* Initialize the omap3 opp table */ - if (omap3_opp_init()) { + if (!machine_is_omap3_beagle()) + return 0; + + /* Initialize the omap3 opp table if not already created. */ + r = omap3_opp_init(); + if (IS_ERR_VALUE(r) && (r != -EEXIST)) { pr_err("%s: opp default init failed\n", __func__); return; } @@ -458,13 +463,13 @@ static void __init beagle_opp_init(void) if (cpu_is_omap3630()) { struct device *mpu_dev, *iva_dev; - mpu_dev = omap_device_get_by_hwmod_name("mpu"); + mpu_dev = get_cpu_device(0); iva_dev = omap_device_get_by_hwmod_name("iva"); if (IS_ERR(mpu_dev) || IS_ERR(iva_dev)) { pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n", __func__, mpu_dev, iva_dev); - return; + return -ENODEV; } /* Enable MPU 1GHz and lower opps */ r = opp_enable(mpu_dev, 800000000); @@ -484,8 +489,9 @@ static void __init beagle_opp_init(void) opp_disable(iva_dev, 660000000); } } - return; + return 0; } +device_initcall(beagle_opp_init); static void __init omap3_beagle_init(void) { @@ -522,8 +528,6 @@ static void __init omap3_beagle_init(void) /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); - - beagle_opp_init(); } MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")