| Message ID | 1351015771-6308-1-git-send-email-khilman@deeprootsystems.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tuesday 23 October 2012 11:39 PM, Kevin Hilman wrote: > From: Kevin Hilman <khilman@ti.com> > > When debounce clocks are disabled, ensure that the banks > dbck_enable_mask is cleared also. Otherwise, context restore on > subsequent off-mode transition will restore previous value from the > shadow copies (bank->context.debounce*) leading to mismatch state > between driver state and hardware state. > > This was discovered when board code was doing > > gpio_request_one() > gpio_set_debounce() > gpio_free() > > which was leaving the GPIO debounce settings in a confused state. > Then, enabling off mode causing bogus state to be restored, leaving > GPIO debounce enabled which then prevented the CORE powerdomain from > transitioning. > > Reported-by: Paul Walmsley <paul@pwsan.com> > Cc: Igor Grinberg <grinberg@compulab.co.il> > Signed-off-by: Kevin Hilman <khilman@ti.com> > --- Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Oct 23, 2012 at 8:09 PM, Kevin Hilman <khilman@deeprootsystems.com> wrote: > From: Kevin Hilman <khilman@ti.com> > > When debounce clocks are disabled, ensure that the banks > dbck_enable_mask is cleared also. Otherwise, context restore on > subsequent off-mode transition will restore previous value from the > shadow copies (bank->context.debounce*) leading to mismatch state > between driver state and hardware state. > > This was discovered when board code was doing > > gpio_request_one() > gpio_set_debounce() > gpio_free() > > which was leaving the GPIO debounce settings in a confused state. > Then, enabling off mode causing bogus state to be restored, leaving > GPIO debounce enabled which then prevented the CORE powerdomain from > transitioning. > > Reported-by: Paul Walmsley <paul@pwsan.com> > Cc: Igor Grinberg <grinberg@compulab.co.il> > Signed-off-by: Kevin Hilman <khilman@ti.com> Thanks! Applied with Felipe's and Santosh's ACKs. Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 10/24/12 10:16, Linus Walleij wrote: > On Tue, Oct 23, 2012 at 8:09 PM, Kevin Hilman > <khilman@deeprootsystems.com> wrote: > >> From: Kevin Hilman <khilman@ti.com> >> >> When debounce clocks are disabled, ensure that the banks >> dbck_enable_mask is cleared also. Otherwise, context restore on >> subsequent off-mode transition will restore previous value from the >> shadow copies (bank->context.debounce*) leading to mismatch state >> between driver state and hardware state. >> >> This was discovered when board code was doing >> >> gpio_request_one() >> gpio_set_debounce() >> gpio_free() >> >> which was leaving the GPIO debounce settings in a confused state. >> Then, enabling off mode causing bogus state to be restored, leaving >> GPIO debounce enabled which then prevented the CORE powerdomain from >> transitioning. >> >> Reported-by: Paul Walmsley <paul@pwsan.com> >> Cc: Igor Grinberg <grinberg@compulab.co.il> >> Signed-off-by: Kevin Hilman <khilman@ti.com> > > Thanks! Applied with Felipe's and Santosh's ACKs. If not too late: Acked-by: Igor Grinberg <grinberg@compulab.co.il> Kevin, thanks for the patch and sorry I could not respond on time.
On Tue, Oct 23, 2012 at 9:09 PM, Kevin Hilman <khilman@deeprootsystems.com> wrote: > From: Kevin Hilman <khilman@ti.com> > > When debounce clocks are disabled, ensure that the banks > dbck_enable_mask is cleared also. Otherwise, context restore on > subsequent off-mode transition will restore previous value from the > shadow copies (bank->context.debounce*) leading to mismatch state > between driver state and hardware state. This doesn't look right to me, aren't you effectively disabling debounce forever here? _gpio_dbck_disable is called from omap_gpio_runtime_suspend() and nothing will ever restore dbck_enable_mask back to what it was set by _set_gpio_debounce and debounce functionality is lost. > > This was discovered when board code was doing > > gpio_request_one() > gpio_set_debounce() > gpio_free() > > which was leaving the GPIO debounce settings in a confused state. > Then, enabling off mode causing bogus state to be restored, leaving > GPIO debounce enabled which then prevented the CORE powerdomain from > transitioning. > > Reported-by: Paul Walmsley <paul@pwsan.com> > Cc: Igor Grinberg <grinberg@compulab.co.il> > Signed-off-by: Kevin Hilman <khilman@ti.com> > --- > Applies on v3.7-rc2, targetted for v3.7. > > drivers/gpio/gpio-omap.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c > index 94cbc84..dee2856 100644 > --- a/drivers/gpio/gpio-omap.c > +++ b/drivers/gpio/gpio-omap.c > @@ -187,6 +187,7 @@ static inline void _gpio_dbck_disable(struct gpio_bank *bank) > * to detect events and generate interrupts at least on OMAP3. > */ > __raw_writel(0, bank->base + bank->regs->debounce_en); > + bank->dbck_enable_mask = 0; > > clk_disable(bank->dbck); > bank->dbck_enabled = false; > -- > 1.8.0 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
On Wednesday 24 October 2012 05:32 PM, Grazvydas Ignotas wrote: > On Tue, Oct 23, 2012 at 9:09 PM, Kevin Hilman > <khilman@deeprootsystems.com> wrote: >> From: Kevin Hilman <khilman@ti.com> >> >> When debounce clocks are disabled, ensure that the banks >> dbck_enable_mask is cleared also. Otherwise, context restore on >> subsequent off-mode transition will restore previous value from the >> shadow copies (bank->context.debounce*) leading to mismatch state >> between driver state and hardware state. > > This doesn't look right to me, aren't you effectively disabling > debounce forever here? _gpio_dbck_disable is called from > omap_gpio_runtime_suspend() and nothing will ever restore > dbck_enable_mask back to what it was set by _set_gpio_debounce and > debounce functionality is lost. > As per commit log, the issue seen with request->debounce->free() sequence and hence on free, debounce state needs to be cleared. Next gpio_set_debounce() should set the debounce mask right so the patch seems to be right. >> >> This was discovered when board code was doing >> >> gpio_request_one() >> gpio_set_debounce() >> gpio_free() >> >> which was leaving the GPIO debounce settings in a confused state. >> Then, enabling off mode causing bogus state to be restored, leaving >> GPIO debounce enabled which then prevented the CORE powerdomain from >> transitioning. >> But there is one more case which might break because of this patch. As part of idle, we might end up with below without gpio_free() omap2_gpio_prepare_for_idle() ->pm_runtime_put_sync_suspend() -> omap_gpio_runtime_suspend() ->_gpio_dbck_disable() And last call will clear the debounce mask state which will lost and hence the debounce clock won't be enabled on resume. I let Kevin comment whether this is the valid case or not. Regards Santosh -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Oct 24, 2012 at 3:49 PM, Santosh Shilimkar <santosh.shilimkar@ti.com> wrote: > On Wednesday 24 October 2012 05:32 PM, Grazvydas Ignotas wrote: >> >> On Tue, Oct 23, 2012 at 9:09 PM, Kevin Hilman >> <khilman@deeprootsystems.com> wrote: >>> >>> From: Kevin Hilman <khilman@ti.com> >>> >>> When debounce clocks are disabled, ensure that the banks >>> dbck_enable_mask is cleared also. Otherwise, context restore on >>> subsequent off-mode transition will restore previous value from the >>> shadow copies (bank->context.debounce*) leading to mismatch state >>> between driver state and hardware state. >> >> >> This doesn't look right to me, aren't you effectively disabling >> debounce forever here? _gpio_dbck_disable is called from >> omap_gpio_runtime_suspend() and nothing will ever restore >> dbck_enable_mask back to what it was set by _set_gpio_debounce and >> debounce functionality is lost. >> > As per commit log, the issue seen with request->debounce->free() > sequence and hence on free, debounce state needs to be cleared. > Next gpio_set_debounce() should set the debounce mask right so > the patch seems to be right. > > >>> >>> This was discovered when board code was doing >>> >>> gpio_request_one() >>> gpio_set_debounce() >>> gpio_free() >>> >>> which was leaving the GPIO debounce settings in a confused state. >>> Then, enabling off mode causing bogus state to be restored, leaving >>> GPIO debounce enabled which then prevented the CORE powerdomain from >>> transitioning. >>> > > But there is one more case which might break because of this patch. > As part of idle, we might end up with below without gpio_free() > omap2_gpio_prepare_for_idle() > ->pm_runtime_put_sync_suspend() > -> omap_gpio_runtime_suspend() > ->_gpio_dbck_disable() > > And last call will clear the debounce mask state which will lost and > hence the debounce clock won't be enabled on resume. > > I let Kevin comment whether this is the valid case or not. That's exactly what I had in mind - we lose debounce functionality on first runtime suspend.
Grazvydas Ignotas <notasas@gmail.com> writes: > On Tue, Oct 23, 2012 at 9:09 PM, Kevin Hilman > <khilman@deeprootsystems.com> wrote: >> From: Kevin Hilman <khilman@ti.com> >> >> When debounce clocks are disabled, ensure that the banks >> dbck_enable_mask is cleared also. Otherwise, context restore on >> subsequent off-mode transition will restore previous value from the >> shadow copies (bank->context.debounce*) leading to mismatch state >> between driver state and hardware state. > > This doesn't look right to me, aren't you effectively disabling > debounce forever here? _gpio_dbck_disable is called from > omap_gpio_runtime_suspend() and nothing will ever restore > dbck_enable_mask back to what it was set by _set_gpio_debounce and > debounce functionality is lost. Yes, you're right. Good catch. I need a fix that's more targetted to the free/reset path. Linus, please revert if it's not too late, and I'll come up with a more targetted fix. Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wednesday 24 October 2012 07:49 PM, Kevin Hilman wrote: > Grazvydas Ignotas <notasas@gmail.com> writes: > >> On Tue, Oct 23, 2012 at 9:09 PM, Kevin Hilman >> <khilman@deeprootsystems.com> wrote: >>> From: Kevin Hilman <khilman@ti.com> >>> >>> When debounce clocks are disabled, ensure that the banks >>> dbck_enable_mask is cleared also. Otherwise, context restore on >>> subsequent off-mode transition will restore previous value from the >>> shadow copies (bank->context.debounce*) leading to mismatch state >>> between driver state and hardware state. >> >> This doesn't look right to me, aren't you effectively disabling >> debounce forever here? _gpio_dbck_disable is called from >> omap_gpio_runtime_suspend() and nothing will ever restore >> dbck_enable_mask back to what it was set by _set_gpio_debounce and >> debounce functionality is lost. > > Yes, you're right. Good catch. > > I need a fix that's more targetted to the free/reset path. > Right. Just clearing the debounce mask in omap_gpio_free() should do the trick. Regards Santosh -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Oct 24, 2012 at 4:19 PM, Kevin Hilman <khilman@deeprootsystems.com> wrote: > Linus, please revert if it's not too late, and I'll come up with a more > targetted fix. OK I ditched it, no big deal. Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 94cbc84..dee2856 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -187,6 +187,7 @@ static inline void _gpio_dbck_disable(struct gpio_bank *bank) * to detect events and generate interrupts at least on OMAP3. */ __raw_writel(0, bank->base + bank->regs->debounce_en); + bank->dbck_enable_mask = 0; clk_disable(bank->dbck); bank->dbck_enabled = false;