diff mbox

mmc: dw-mmc: relocate the position called dw_mci_setup_bus()

Message ID 5089FC09.6090101@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Jaehoon Chung Oct. 26, 2012, 2:57 a.m. UTC
I think right that dw_mci_setup_bus() is called into set_ios().
Actually clock is enabled at dw_mci_setup_bus() in now.
Then didn't ensure to wait the 74clock.
To stable clock is relocated the position into dw_mci_set_ios().

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
 drivers/mmc/host/dw_mmc.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

Comments

Seungwon Jeon Oct. 26, 2012, 10:20 a.m. UTC | #1
Friday, October 26, 2012, Jaehoon Chung <jh80.chung@samsung.com>
> I think right that dw_mci_setup_bus() is called into set_ios().
> Actually clock is enabled at dw_mci_setup_bus() in now.
> Then didn't ensure to wait the 74clock.
This will be ensured when first command is sent
with 'send_initialization' flag of CMD register.
But I feel this change is reasonable.
Looks good to me if commit message is modified.

Acked-by: Seungwon Jeon <tgih.jun@samsung.com>

Thanks.
Seungwon Jeon

> To stable clock is relocated the position into dw_mci_set_ios().
> 
> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
>  drivers/mmc/host/dw_mmc.c |    6 +++---
>  1 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 250aa18..9001844 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -682,9 +682,6 @@ static void __dw_mci_start_request(struct dw_mci *host,
>  	if (host->pdata->select_slot)
>  		host->pdata->select_slot(slot->id);
> 
> -	/* Slot specific timing and width adjustment */
> -	dw_mci_setup_bus(slot);
> -
>  	host->cur_slot = slot;
>  	host->mrq = mrq;
> 
> @@ -810,6 +807,9 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>  	if (slot->host->drv_data->set_ios)
>  		slot->host->drv_data->set_ios(slot->host, ios);
> 
> +	/* Slot specific timing and width adjustment */
> +	dw_mci_setup_bus(slot);
> +
>  	switch (ios->power_mode) {
>  	case MMC_POWER_UP:
>  		set_bit(DW_MMC_CARD_NEED_INIT, &slot->flags);
> --
> 1.7.4.1
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Will Newton Oct. 26, 2012, 1:03 p.m. UTC | #2
On Fri, Oct 26, 2012 at 3:57 AM, Jaehoon Chung <jh80.chung@samsung.com> wrote:
> I think right that dw_mci_setup_bus() is called into set_ios().
> Actually clock is enabled at dw_mci_setup_bus() in now.
> Then didn't ensure to wait the 74clock.
> To stable clock is relocated the position into dw_mci_set_ios().
>
> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
>  drivers/mmc/host/dw_mmc.c |    6 +++---
>  1 files changed, 3 insertions(+), 3 deletions(-)

This patch looks ok in principle, but I have trouble understanding the
commit message. Would it be possible to try and reword it a bit to
make it clearer?

Thanks,
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 250aa18..9001844 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -682,9 +682,6 @@  static void __dw_mci_start_request(struct dw_mci *host,
 	if (host->pdata->select_slot)
 		host->pdata->select_slot(slot->id);
 
-	/* Slot specific timing and width adjustment */
-	dw_mci_setup_bus(slot);
-
 	host->cur_slot = slot;
 	host->mrq = mrq;
 
@@ -810,6 +807,9 @@  static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	if (slot->host->drv_data->set_ios)
 		slot->host->drv_data->set_ios(slot->host, ios);
 
+	/* Slot specific timing and width adjustment */
+	dw_mci_setup_bus(slot);
+
 	switch (ios->power_mode) {
 	case MMC_POWER_UP:
 		set_bit(DW_MMC_CARD_NEED_INIT, &slot->flags);