| Message ID | 1349313365-5262-4-git-send-email-mturquette@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Mike Turquette <mturquette@ti.com> writes: > From: Mike Turquette <mturquette@linaro.org> > > Implement the voltdm->get_voltage callback for the voltage controller > driver. nit: since it's not actually used in this series, it should say Impelment the function that will be used as the ->get_voltage() callback... > This reads the DATA field corresponding to each VC and returns > the voltage, after converting it from vsel format. > > If DATA is zero (the reset value) then the caller must interpret this as > the PMIC running at the default power-on voltage. In such a case DT > data for the PMIC is necessary to know the voltage. > > Signed-off-by: Mike Turquette <mturquette@ti.com> > Signed-off-by: Mike Turquette <mturquette@linaro.org> > --- > arch/arm/mach-omap2/vc.c | 21 +++++++++++++++++++++ > arch/arm/mach-omap2/vc.h | 1 + > 2 files changed, 22 insertions(+) > > diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c > index 2bcac64..90a9ea6 100644 > --- a/arch/arm/mach-omap2/vc.c > +++ b/arch/arm/mach-omap2/vc.c > @@ -101,6 +101,27 @@ static int omap_vc_config_channel(struct voltagedomain *voltdm) > } > > /* Voltage scale and accessory APIs */ > +unsigned long omap_vc_get_bypass_data(struct voltagedomain *voltdm) > +{ > + struct omap_vc_channel *vc = voltdm->vc; > + u32 vc_bypass_value; > + u8 vsel; > + unsigned long volt; > + > + /* sanity */ > + if (!voltdm->pmic || !voltdm->pmic->vsel_to_uv || > + !voltdm->read || !voltdm->write) > + return 0; > + > + vc_bypass_value = voltdm->read(vc->common->bypass_val_reg); > + vc_bypass_value &= vc->common->data_mask; > + vsel = vc_bypass_value >> __ffs(vc->common->data_mask); Ah, now I see where the data_mask is used. :) Kevin > + volt = voltdm->pmic->vsel_to_uv(vsel); > + > + return volt; > +} > + > int omap_vc_pre_scale(struct voltagedomain *voltdm, > unsigned long target_volt, > u8 *target_vsel, u8 *current_vsel) > diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h > index 84a61b1..e7d4719 100644 > --- a/arch/arm/mach-omap2/vc.h > +++ b/arch/arm/mach-omap2/vc.h > @@ -112,6 +112,7 @@ extern struct omap_vc_channel omap4_vc_iva; > extern struct omap_vc_channel omap4_vc_core; > > void omap_vc_init_channel(struct voltagedomain *voltdm); > +unsigned long omap_vc_get_bypass_data(struct voltagedomain *voltdm); > int omap_vc_pre_scale(struct voltagedomain *voltdm, > unsigned long target_volt, > u8 *target_vsel, u8 *current_vsel); -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 2bcac64..90a9ea6 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -101,6 +101,27 @@ static int omap_vc_config_channel(struct voltagedomain *voltdm) } /* Voltage scale and accessory APIs */ +unsigned long omap_vc_get_bypass_data(struct voltagedomain *voltdm) +{ + struct omap_vc_channel *vc = voltdm->vc; + u32 vc_bypass_value; + u8 vsel; + unsigned long volt; + + /* sanity */ + if (!voltdm->pmic || !voltdm->pmic->vsel_to_uv || + !voltdm->read || !voltdm->write) + return 0; + + vc_bypass_value = voltdm->read(vc->common->bypass_val_reg); + vc_bypass_value &= vc->common->data_mask; + vsel = vc_bypass_value >> __ffs(vc->common->data_mask); + + volt = voltdm->pmic->vsel_to_uv(vsel); + + return volt; +} + int omap_vc_pre_scale(struct voltagedomain *voltdm, unsigned long target_volt, u8 *target_vsel, u8 *current_vsel) diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h index 84a61b1..e7d4719 100644 --- a/arch/arm/mach-omap2/vc.h +++ b/arch/arm/mach-omap2/vc.h @@ -112,6 +112,7 @@ extern struct omap_vc_channel omap4_vc_iva; extern struct omap_vc_channel omap4_vc_core; void omap_vc_init_channel(struct voltagedomain *voltdm); +unsigned long omap_vc_get_bypass_data(struct voltagedomain *voltdm); int omap_vc_pre_scale(struct voltagedomain *voltdm, unsigned long target_volt, u8 *target_vsel, u8 *current_vsel);